Samsung A900 USB mass storage and Tiger

I just got a Samsung A900 phone, when I connect with USB as mass storage device, the phone is mounted write protected in 10.4.3. In 10.3.9, it mounts as a writeable drive.

Hi there. I just bought a Samsung A900 and figured out how to use the phone as a USB Mass storage device:
My setup is a PowerBook G4 with 10.4.6 all updates (including the latest Security Updates and iLife '06 updates).
1. Plug the USB cable into the phone, and your computer.
2. The phone should say "USB Cable connected" on the main screen. If it doesn't, turn the phone off, and back on again with the cable plugged in.
3. Press the Menu button
4. Go to Tools
5. Go to Mass Storage
6. Select "Connect to PC."
You will not be able to receive phone calls while the phone is in USB Mass Storage mode.
A new volume should appear in the OS X Finder as "Untitled."
You have access to the same folders as with a Bluetooth connection.
Unfortunately, this also means that it is not a solution to get custom ring tones from an MP3 you own.
I tried looking in Terminal for any hidden folders, and I can't find any. I honestly think a firmware update/hack is needed to enable this on the phone.
Hope this helps.
PowerBook G4 1.33 GHz 17" Mac OS X (10.4.4) iPod w/video 60 GB, iSight
PowerBook G4 1.33 GHz 17" Mac OS X (10.4.6) iPod w/video 60 GB, iSight

Similar Messages

IPOD seen as two drives(USB Mass Storage & and Dell USB )

My IPOD classic has not worked properly since I updated my OS to Windows XP. At first the IPOD was seen as two different USB controllers (Apple USB Driver, and a USB Mass Storage Device) I've gone through every troubleshooting article on the apple website. After downloading a hotfix, my computer recognizes the IPOD as an IPOD but it doesn't connect to itunes long enough for me to restore it. It automatically disconnects after being plugged into the computer. If anybody can help, please, please please let me know.
Thanks.

I just purchased an ipod classic 120GB and after downloading itunes to the computer I can no longer use my DVD/CD drive as the ipod is using that drive now, which is the E drive on my computer. I noticed that if I uninstall itunes I get to use my DVD/CD drive again. I do not know what next to try either. So my ipod is seen as a mass storage device, I need help too, can anyone help?
zndrsmith

KDE 4.2 and USB Mass Storage , does not write data until unmounted

Hi,
I have a Nokia phone that I connect for USB mass storage, and KDE 4.2.2 does not seem to write the data to the device until I unmount.
Is there a way to force the write so it happens right away? It's annoying because I can't see any progress when it copies the data at unmount.
Later,
Snorkel

That's kinda the way linux does things, not specifically a KDE issue. It's so that the system only has to write out to the media only once, even if you separately add/delete/move 50 different files.
I think you can run 'sync' and that will flush all the file system buffers to disk.
Last edited by Odysseus (2009-05-01 01:30:59)

USB Mass Storage Mode Missing :-(

I just upgraded? to the Samsung Galaxy S III today and have been very happy for the most part. However...
I am EXTREMELY disappointed that the only options to transfer files to the phone/SD Card are to use the MTP and Photo protocols. I always loved my Android phone...built off of open source software...and using open standards (things like USB Mass Storage). It is incredibly useful to be able to plug my phone into almost any PC, running any OS, and be able to transfer files to and fro.
Where is the rest of the uproar? When are we going to demand that one of the most useful features on our phone be put back. It was already there...it was already working...and has been dropped for lame, limited use protocols... Why? Who is getting paid off? Why?
Bring back USB Mass Storage Mode!!!!

It is always a good idea to do some research... I have followed your suggestion and found that Google has two reasons for using MTP instead of USB Mass Storage. They are:
1) “A main reason for using MTP rather than for example the USB mass-storage device class (MSC) is that the latter operates at the granularity of a mass storage device block (usually in practice, a FAT block), rather than at the logical file level. In other words, the USB mass storage class is designed to give a host computer undifferentiated access to bulk mass storage, such as compact flash, rather than to a file system, which might be safely shared with the target device (except for specific files which the host might be modifying/accessing). In practice, therefore, when a USB host computer has mounted an MSC partition, it assumes absolute control of the storage, which then may not be safely modified by the device without risk of data corruption until the host computer has severed the connection.“ -sombody from Google
--My Response - "I am totally OK with the SD card not being safe to be mounted. During the time I choose to be connected (only when transferring files)...I DO want the PC and not the phone to be in complete control of the SD card."
2) “MTP is a big improvement over USB mass storage — for devices with lots of internal memory, a manufacturer no longer needs to come up with some hard partition between the USB mass storage and internal storage. Instead, they are all in one partition, with MTP providing access to the directory of media files that would normally be available through USB mass storage. This means there is no longer a need for apps on SD card for such devices, because what used to be the ‘internal SD card’ is in the same partition as where applications are stored. The storage on your device can be used for either applications or media, depending on what you want to put on it. You aren’t stuck with how much space the manufacturer decided to leave for the two areas." -somebody else from Google
--My Response - "I am completely OK with the removable SD card being treated separately. That is EXACTLY what I want. I want to keep MY DATA separate and only on the removable SD card. And all of the stuff that I don't care about...that can be easily reinstalled (apps and such) on the internal memory. It is a good design. The phone has enough internal memory that I don't have any trouble with space for Apps (so not a conern at all)."
--My Overall Response - "The loss of flexibility, portability, and usefullness does NOT come close to justifying removal of the USB Mass Storage protocol. I am still VERY disappointed."
Where is the THUMBS DOWN... and INCORRECT ANSWER?

PCI Communication Controller and USB Mass Storage Device driver was missing

Hi,
Recently i formated HP Pavilion Slimline 400 PC series and reinstalled with windows 7 32 bit.\
initially i found a lot of driver was missing. i have gone through hp support forums and almost all drivers are running on 64 bit with minimum requirement OS windows 8.1.
i couldn't find it anywhere. under device manager, these two devices are being shown with yellow exclamation
PCI Simple Communication Controller :
PCI\VEN_8086&DEV_8C3A&SUBSYS_2AF7103C&REV_04
PCI\VEN_8086&DEV_8C3A&SUBSYS_2AF7103C
PCI\VEN_8086&DEV_8C3A&CC_078000
PCI\VEN_8086&DEV_8C3A&CC_0780
USB Mass Storage Device :
USB\VID_054C&PID_02A5&REV_0100
USB\VID_054C&PID_02A5
Please kindly provide the link for the drivers, so i can use my PC.
thanks in advance

Hi:
Did you install the USB3 controller driver so the device you installed could work?
https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=21129&lang=eng&ProdId=3467
The USB Mass Storage Device is something you have connected to the PC.
Specifically a Sony® MicroVault USB Flash Drive.
If my suggestion to let windows update find the Intel Management Engine driver, didn't work, see if this driver from Intel works. It also has the hardware ID for that device in the setup information file.
https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=22093&lang=eng

I have a new mac air 11inches, i tried to download my pictures using my usb mass storage device. how come my mac can't recognize and open my files? pls help...

i have a new mac air 11 inches and i tried to download my pictures using my usb mass storage device. how come my mac is not reading it? pls hel...

What exactly is your 'mass USB device', and how is it formatted? When you connect it to your MBA, does it show up on the desktop?

Ovi suite messed my computer and usb mass storage ...

I had lots of problems with my C6 and had to backup it with Ovi suite before sending to nokia service.
Now I have uninstalled Ovi suite and can't connect my phone anymore as a usb mass storage drive. I also found out that while installing Ovi suite, it wasn't the only nokia program that got installed to my hard drive.
How I can not connect my phone again as a mass storage?
Win xp, sp3
And I also WANT EVERY NOKIA APP OFF MY COMPUTER. Why this ain't happening while uninstalling ovi suite (which was the only app that I wanted to install)???

Hi,
I guess the installation of Ovi Suite is corrupted, please follow the steps provided below to assist you in this regard
Step 1
- Go to Add/remove Control Panel
- Click Ovi Suite
- Click Repair.
Once repair is completed then please restart computer and check.
If Step 1 didnt work, then try the below step
Step2
-Go to Add/Remove in Control Panel
- Click Ovi Suite
- Click Uninstall
Also uninstall the following f
- Nokia Connectivity Cable Driver
- PC connectivity Solution
Then right click my computer, click manage.
- Device Manager-Ports- If you find anything by name Nokia please unistall ( Dont remove anything else)
Then reinstall windows Installer from the link provided below
For Windows 7 & Vista
http://msdn.microsoft.com/en-us/library/cc185688(v=vs.85).aspx
For Windows XP
http://www.microsoft.com/downloads/en/details.aspx?FamilyID=5a58b56f-60b6-4412-95b9-54d056d6f9f4&dis...
- Then restart computer.
- Download and install Ovi Suite
- Restart Computer again
- Connect the device, dont open Ovi Suite and wait for all the driver to be loaded by windows.
- Once done then lauch Ovi Suite.
- Check for the issue
Hopefully this helps
Cheers
Show appreciation by clicking the kudos star :-), or gesture by typing thanks

After USB mass storage plug - kernel panic

My PB 15'' goes into Kernel Panic after I try to plug any USB mass storage device.
Other USB devices (hdd, iphone) work fine.
What can I do? I have a Leopard install DVD that doesn't contain Apple Hardware Test. Can I use the Apple Hardware Test I had on the Tiger disks?
Did any of you experienced such a problem?
How did you work this out (if so)?
Regards
F.

Hi, Filippo. Use the Apple Hardware test that you will find on one of the discs that came with your computer. Instructions for using it will appear on the label of the disc that contains it. However, it may be of no use here: your USB ports must be working if some USB devices are recognized and usable, and AHT will not test any external device.
Other USB devices (hdd, iphone) work fine.
A USB hard disk drive (hdd) IS a mass storage device, so apparently not all mass storage devices cause the problem. What particular devices do cause the problem?
Message was edited by: eww

My ipod 4th generation wont show up on itunes or my compute, but there is a file for USB mass storage device in my device management with a yellow triangle next to it. how do i get it to sync? HELP!!!

my ipod 4th generation wont show up on itunes or my compute, but there is a file for USB mass storage device in my device management with a yellow triangle next to it. how do i get it to sync? HELP!!!

Here:
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
or
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP

USB Mass Storage Device - ?

Shuffle shows up as a USB Mass Storage Device under the drive (USB Port) i plug it into.
It will not take an update or reformat.
Wondering if it is possible that the factory format could be erased and now the unit is just being recognized as a storage device and unable to be used in the manner it was originally intended for...MUSIC.?
What does it mean when you get a message "Media in Drive - Changed" ?
Fixed many other ipods in past but only one shuffle so far....now this one has me going...no clue what else i can do to it.
Any help would be appreciated.

i think it was trying to read the shuffle when i wanted to format and restore.
i never did get it to work.
no way of knowing now..i just got through tearing into this one to make one good shuffle out of the two i was working on.
all was good till i went to put the slide bar on/off switch back on....broke the switch again.
do you have a switch?
thanks

USB Mass Storage device problem

Hello, I cant use my USB mass storage device in my computer, it is a SanDisk ImageMate CF/SM unit, which works perfectly in every other computer I have tried it, but in this one it hangs while accessing the device, and in linux, it hangs while mounting it (the same thing).
I dont know what might the problem be but some other people have seen the same problem, perhaps someone here can help me.

Yeah, I though so, but first I wanted to know what might be causing this incompatibility, in the linux posts people have said that it is a nForce2 generic problem, perhaps a big nvidia bug? heh

USB Mass Storage Device won't Eject/Unmount

My brother bought a Sanyo ICR-B180NX digital voice recorder last year to use with his iBook. It was working very well up until about August of 2005. At that point, the recorder would mount on the desktop, and he could get all the files off (it records direct to MP3 format rather than WMV, so he can edit his files very easily), but when it came time to eject it, the device icon would disappear and then immediately re-appear on the desktop. The display on the voice recorder remained static at the "Connect" screen.
I believe this happened in conjunction with some sort of OS update, as it was a "sudden" thing. We can't quite recall what happened between the times it worked and the time it stopped working.
I have tried the device on a PC, and it works the way it should, so I don't believe there's anything wrong with it.
Now, I know the system requirements on the website say that you must have Windows, but a statement from a support company (we returned it to the place where we got it, and they sent it out for repairs, and it came back with a letter) states that the device does act as a generic Mass Storage device, and thus may work with most systems.
All my other USB storage devices (ie. SanDisk 12-in-1 card reader, SanDisk Cruzer Titanium 2GB, iPod Photo), and FireWire devices (ie. WiebeTech TrayDock Extreme) work fine and unmount fine.
Does anyone know of any changes to the way Mass Storage devices are ejected in the current iteration of the OS? I haven't had a chance to test the device under an older OS, but will soon.
Alternately, if anyone has any suggestions regarding replacements (not really looking forward to that, given this recorder cost almost $300CAD), let me know. We need a device that can plug in via USB and transfer files to his iBook which he can edit together (he's a newspaper reporter in training, and needs to edit the interviews to take out such things like dead air, etc).
Thanks!
Mike Ma.

Hi
+USB mass storage device. An error occurred during the installation of the device the data is invalid+
This typical error message appears if the installation of external USB devices failed.
Why? This is not easy to say
What you could do firstly is to clean your registry using the freeware software called CCleaner (Google for that).
Install it and clean your OS and the registry entries.
After cleaning access the device manager and remove all USB root hubs and all USB Host controllers from the device list and reboot the notebook.
New reboot should cause a new installation of USB drivers.
Finally try to connect and try to install your external USB devices again.

Windows 7 64-bit not loading USB mass storage driver

I have a rather strange problem with my Windows 7 Ultimate 64-bit. Everything seems to work fine except for USB mass storage devices. I have USB keyboard, mouse and even a USB audio (wireless headset) all working fine on the computer. But
any USB external drive, thumdrive or USB card reader with flash cards inserted into the USB port of my computer won't work.
Windows keeps reporting that it is unable to find the driver. When I go into the Device Manager console and choose to manually update the driver, then point it to the C:\Windows (with search for sub-directories enabled), it detects the USB Mass Storage
driver but complains that it is unable to load it. The exact message is this: Windows found driver software for your device but encountered error while attempting to install it. USB Mass Storage Device. The system cannot find the file
specified.
This happens to ALL USB Mass storage device, and it doesn't matter which port I plug the device into.
Here's the weird thing, I have VMware Workstation installed on this computer and if I power on a VM that runs Windows 7 32-bit as the Guest OS and connect the USB storage devices to the guest OS via VMware Workstation, the USB storage devices work!
So it would appear that the USB ports are functioning properly but for some reasons, my Windows 64-bit is unable to load the driver.
Any idea how to fix this besides a "nuke it from orbit" and format/reinstall Windows?
Thanks.

I'm very excited to finally have a solution for this problem. Thank You Balaji for figuring this out. I've been struggling with this for a number of years, and had only one USB Hard Drive that worked. I too have VMware workstation, and had the missing files
in "c:\windows\inf." I can say with certainty that I did not delete the files from that folder, but something is common in both of our situations. Maybe it has to do with VMware, and some of it's updates over the years. I'm also using nCompute to share out
a networked desktop via the wire.
One more thing worthy of mention is this machine was an update from Windows Vista, and the USB hard drive that worked was configured back than. So although I could never add another HD, at least I had the one.
Now with having copied over the files, I can plugin other USB enclosures with different drives and they too are working.
Like you mentioned, it was always possible to use USB devices within my Virtual Machines, so it was clear that the USB ports were functional. I actually got the files from a clean Windows 7 VM, copying out the \windows\inf folder and doing a compare between
the the real one and the virtual one. I found the two missing files you mentioned, along with 8 others. I went ahead and included them all in your fix.
It worked, Amazing. Thanks again. :O)

Usb masse storage in solaris 10 problem !!

Hi all
i have srss 3.0 with solaris10-GA, all work well but the usb masse storage
does' nt recognize by srss3.0 are there solution for that problem.
or patch for srss 3.0.
thanks team

Congratulations on your choice of Os ;-)
To solve this problem you can try and create a directory called /rmdisk , then start vold running:
/etc/init.d/volmgt stop
/etc/init.d/volmgt start
if you are lucky your USB flash will show up under /rmdisk/<name> after a few seconds.
If not you should be able to see the flash with cfgadm, which list the status of USB ports (among other things).
Solaris should automatically create a /dev/dsk/ and /dev/rdsk/ entries for your flash memory, if its not automatically mounted by vold, try and stop vold using
/etc/init.d/volmgt stop
Then do a cd /dev/dsk and run an ls -lart, the USB devices should be among the last devices in that list, then mount it using:
mount -F pcfs /dev/dsk/<device> /some/directory
the device should end with s2 or p2, some flash devices might also need :c, aka /dev/dsk/<device>:c, it depends how its configured.
See man mount_pcfs for more information...
Hope this helps a bit (:
//Magnus

Can't enable USB Mass Storage

I am trying to use recovery software (Recuva) to replace deleted photos. When connecting to my laptop, I can only choose Media Device (MTP) or Camera (PTP). Recuva cannot find my phone without USB Mass Storage enabled but that option seems to no longer exist? What can I do to enable this?

You need to enable USB debugging on phone, so the computer can see it as a storage device.
Go into Settings, then scroll down to the bottom and click on About Phone.
Scroll down to the bottom to where it says “Build Number”.
Tap on “Build number” 7 times. After the third tap, Android will start counting down on how many taps are left before you can access the developer options, with a playful “You are now [insert number of remaining taps] steps away from being a developer”.
After the 7th tap, you’ll get a “You are now a developer!” message.
Now, go back to the main settings screen, and voila, the “Developer options” menu will be visible at the bottom, just above “About phone”!
Developer options->enable USB debugging

Samsung A900 USB mass storage and Tiger

Similar Messages

Maybe you are looking for