Samsung Serie 7 ultra: 3D Features not working, Liquify Filter shows black screen

My System: Win 8, AMD Radeon HD 8500m, Photoshop CC
Is it a driver problem? Anyone having same issues?

I do not see the 8500m listed as being tested even. Must be a new mobile chip for low power..
Tested video cards for Photoshop CS6
Adobe tested the following video cards before the release of Photoshop CS6. This document lists the video card by series. The minimum amount of RAM supported on video cards for Photoshop CS6 is 256 MB. Photoshop 13.1 cannot display 3D features if you have less than 512 MB of VRAM on your video card.
Important: This document is updated as newly released cards are tested. However, Adobe cannot test all cards in a timely manner. If a video card is not listed here, but was released after May 2012, you can assume that the card will work with Photoshop CS6.
Adobe tested laptop and desktop versions of the following cards. Be sure to download the latest driver for your specific model. (Laptop and desktop versions have slightly different names.)
nVidia GeForce 8000, 9000, 100, 200, 300, 400, 500, 600 series
nVidia Quadro 400, 600, 2000, 4000 (Mac & Win), CX, 5000, 6000, K600, K2000, K4000, K5000 (Windows & Mac OS)
AMD/ATI Radeon 2000, 3000, 4000, 5000, 6000, 7000 series
AMD/ATI FirePro 3800, 4800, 5800, 7800, 8800, 9800, 3900, 4900, 5900, 7900
AMD/ATI FireGL W5000, W7000, W8000
Intel Intel HD Graphics, Intel HD Graphics P3000, Intel HD Graphics P4000, Intel(R) HD Graphics P4600/P4700
Note: ATI X1000 series and nVidia 7000 series cards are no longer being tested and are not officially supported in Photoshop CS6. However, some basic GL functionality can be available for both these cards.

Similar Messages

Macbook pro will not wake up and shows black screen

Purchased a MBP three weeks ago. After putting the MBP to sleep it will not wake up. Shows black screen and makes fan sound but will not start unless power off and then on again and at times this does not work.

Hi a,
Try an SMC Reset: http://support.apple.com/kb/HT3964
If no luck, you have 90 days of free AppleCare phone support and a one year warranty. Contact AppleCare or make an appointment at an Apple Store "genius" bar.

HT4623 Iphone 5 is not working. Why the black screen?

Why would Iphone stop working suddenly? Just a black screen. Is there anyway to reset?

Hold down the home button and power button at the same time until you see an apple appear on the screen, then you can let go.

HP LASERJET SERIES 1200 ( EXTRA FEATURES NOT WORKING WITH MAC OSX 10.10)

I presently have a HP LASERJET PRINTER 1200 SERIES that I had been using my APPLE MAC.
The MAC OS was upgraded recently to Yosmite MAC 10.10
I can still print.... however the extra features as double sided printing is lost.
I have tried reloading the drivers - no luck.
Is it possible to post the exact steps that I should follow on my MAC - in order to load the full HP 1200 series features.
My partner is using Windows 7 PC and his driver is able to work with the full features.
HP Laserjet printer 1200 series PLC 5 driver.
Extra information:
I am access my printer over home wireless network - using my Apple Air device.

This printer supports basic functionality out of the box with Mac OS X 10.10 Yosemite. It's possible you can get more features for your device by installing the 3rd party Gutenprint drivers for Mac OS X. You can download this free driver here: http://gimp-print.sourceforge.net/MacOSX.php.
I am an HP employee.
Opinions expressed are mine and do not necessarily reflect the opinions of HP.
Reminder: Please select the Accept as Solution button on the post that best answers your question. Also, you may select the Kudos button on any helpful post to give that person a quick thanks.

Accessibility feature not working - using white on black contrasting colors

There is an accessibility feature that allows a pdf file to be viewed in other than the default black on white background. The choices are white or yellow or green text on a black background. This last worked for me with reader v7 ... neither version 8 or the newest version 9.3.0 works correctly ... when white on black is selected the file is still displayed in the default black on white format. Does anyone know if there is an Adobe product manager who would be able to confirm this problem ... or perhaps have a workaround for it?
thanks ... Don

Loreall,
The replace colors feature in Reader only changes the color of the primary page background, so if the author added a background to the document (even if the added background is white) then this might cause the issue you describe. One thing that may help is if you enable reflow mode, as this forces extra backgrounds to disappear. You can try this by locating the option in the view menu or by hitting Ctrl+4.
AWK

Pick color feature not working properly -- how do I reset?

Pick color feature not working properly -- how do I reset?

You need to contact Adobe for you billing problem this is a user four not adobe customer support.
For your Photoshop Problems this user community may be helpful.
Supply pertinent information for quicker answers
The more information you supply about your situation, the better equipped other community members will be to answer. Consider including the following in your question:
Adobe product and version number
Operating system and version number
The full text of any error message(s)
What you were doing when the problem occurred
Screenshots of the problem
Computer hardware, such as CPU; GPU; amount of RAM; etc.

I have downloaded a trial version of Dreamweaver CS6 to my MacBook. Why do some features not work?

I have downloaded a trial version of Dreamweaver CS6 to my MacBook. Why do some features not work? I have OSX 10.6.8. I am using this trial version for a class I am taking on coding webpages using Dreamweaver. there are features I am using in class that will not open up or appear as options when I use the trial version. Are certain features locked out until I buy a copy or download a purchased copy?

Trial versions have no functional limitations, though your setup/situation might not be supportive of all functionality. You'll need to identify specific issues to get help with them. You should be posting in the DW forum instead of here if your issue does not have to do with downloading/installing.

Versamail Auto-sync feature not working with AOL mail w/Treo 700p (Verizon)

I'm having a problem with the Auto-sync feature not working with my 700p (verizon) with my aol mail. It had worked perfect since May 2007. Just started having problems End of April 2008. Sounded like I needed another incoming mail server from aol other than: imap.aol.com, aol told me they also use pop.aol.com, that isn't working either. I get an error message that says "last auto-sync attempt failed."....Anyone else having this issue? I'm trying to decide whether to get rid of my aol mail of 14 yrs and use other address to continue using versamail 3.5 or keep aol and use Verizon Wireless sync. I do not like how wireless sync sends mail to outbox and then syncs vs sending right away. Please help...
Post relates to: Treo 700p (Verizon)

I am having the EXACT same problem: Palm 700p, Versamail, AOL, Verizon.
It started about 1 month ago. The GET still works, but AUTO-SYNC does not...After spending hours on the phone with Palm tech support, and reaching someone who said AOL had changed something in their servers. They suggested TRYING Chatteremail, another Palm product. I have tried it for 20+ days out of the 30 days you get for free. It works pretty well, but NOT every e-mail that goes to my AOL acct is making it to my phone. The thing that's great about Chatter is that can be "live" all of time. Not auto-syncing every 15 minutes.
It's very frustrating....The same way the Versamail just stopping auto-syncing is very frustrating. With Versamail, sometimes I did not even get the error message. If Chatteremail worked consistently, I would bite the bullet, and pay for it, but to pay for it, and have it not pull down all the e-mails, all the time is not good.
I spoke to Palm Tech Support in N. America today, and they say the way AOL uses IMAP servers is in a non-traditional way, and it's very hard to deal with. They suggest ditching AOL, and using something reliable for syncing purposes like GMAIL. It's just hard to cut the cord. The man I was on the phone with knew of my problem, and he solved it by getting rid of AOL. It's just tough, since so many people have the e-mail address for me.
On http://mobile.aol.com/aolproducts/mobile-email/mail-client
there seems to be some indication when you click on Smart Phones on left, that Coming Soon is Palm, but I don't know if that's going to be downloadable for 700p, or Palms moving forward. Or how far away that is.
I tried wireless sync and hated it.
This is really a pain in the butt.
*** Who did you speak to at AOL?
*** How did you reach them? e-mail? phone #?
I also did a search and found another program called "Snappermail", which I might try, and see if it's any better than Chatteremail.
http://www.handango.com/SoftwareCatalog.jsp?jid=24BX5EEAD31DXE6AB588D59X31E95BD5&osId=904&siteId=1&N...
If you find anything out, please let me know here, ok? This is very bad for me.
Post relates to: Treo 700p (Verizon)

NAC OOB logoff feature not working

Hi all,
I've deployed NAC in L2 OOB VG mode with ADSSO and I'm trying to use the OOB logoff feature but it's not working. The VLAN change detect feature doesn't work either (I think the two problems might be related).
It will work if each user role is assigned a different auth/access VLAN pair but in my setup, everyone has a common auth vlan and separate role-based access vlans. Because of this, I have to use the IP refresh feature as well (this works fine).
I'm running Windows Vista and version 4.8.0 of the NAC software with version 4.8.1.5 of the agent
I checked the release notes and found that caveat CSCth60233 identifies this bug with the VLAN change detect with the workaround being to refresh the IP address automatically after being logged out. Does anyone know of a workaround for this problem to do this automatically? Is a solution for this problem in the works?
Also would anyone be able to help me with my OOB logoff feature not working? I've configured everything according to the documentation.
I appreciate your responses
~Xavier

Here are my configs if necessary. Tell me if anything else is needed.
User Management > User Roles
List of Roles
Edit Role
Traffic Control
Bandwidth
Schedule
Disable this role
Role Name
Role Description
Role Type
Normal Login Role Quarantine Role
*Max Sessions per User Account             ( Case-Insensitive Session Identifiers             )
(1 – 255; 0 for unlimited)
Retag Trusted-side Egress Traffic with VLAN (In-Band)
(0 – 4095, or leave it blank)(*This option has been deprecated, and it will be removed in upcoming releases)
*Out-of-Band User Role VLAN
VLAN ID VLAN Name                 (if left blank, it will default to the default access vlan             settings in the Port Profile)
*Bounce Switch Port After Login (OOB)
Enable               Disable               (This option is effective only when port profile is set to use it)
*Refresh IP After Login (OOB)
Enable               Disable               (This option only applies to L2 OOB Virtual Gateway with Role VLAN             as Access VLAN and switch port is NOT bounced after VLAN change)
*After Successful Login Redirect to
previously requested URL
this URL:
(e.g. http://www.cisco.com/)
Redirect Blocked Requests to
default access blocked page
this URL or HTML message:
*Show Logged-on Users
User info
Logout button
Enable Passive Re-assessment                          (To enable Passive Re-assessment for OOB Agent             connections, you must also enable the OOB Logoff option at             Device Management > Clean Access > General Setup > Agent Login.)
Re-assessment Interval
(Minimum of 60 minutes and maximum of 1440 minutes [24 hours])
Grace Timer
(Minimum of 5 minutes and maximum of 30 minutes)
Default action on failure
Continue Allow user to remediate Logoff user immediately
(*only applies to normal login role)
Device Management > Clean Access
Certified Devices
General Setup
Network Scanner
Clean Access Agent
Updates
            Web Login   · Agent Login
User Role
Unauthenticated Role(not common) role_engineer role_developer role_admin role_sales role_guest
Operating System
ALL WINDOWS_ALL WINDOWS_XP WINDOWS_VISTA_ALL WINDOWS_7_ALL MAC_ALL MAC_OSX LINUX FREEBSD SOLARIS_ALL SOLARIS_86 SOLARIS_SPARC UNIX VMS OS2 PALM
(By default, 'ALL' settings apply to all client operating systems if no OS-specific settings are specified.)
Enable OOB logoff for Windows NAC Agent and Mac OS X Agent        (This global option applies to all OOB CASs and user roles and enables Agent logout and heartbeat timers for OOB Agent connections. You must also enable this option for Passive Re-assessment to function with OOB Agent connections.)
Require use of Agent
(for Windows & Macintosh OSX only)
Agent Download Page Message (or URL):
           Network Security Notice: This network is protected by a Cisco NAC Appliance Agent, a component of the Cisco NAC Appliance Suite. The Agent ensures that your computer meets the requirements for accessing this network, and helps you keep your computer secure and up-to-date.
Please use the Agent to log in to the network.
If you don't have the Agent software yet, download it by clicking the button below. After downloading the installation file, run it to complete the installation.
If you have already downloaded and installed the Agent, please close this window and right-click the Agent icon in the system tray and choose Login from the menu. Enter your usual network user name and password in the login window.
Require use of Cisco NAC Web Agent (for Windows only)
          Cisco NAC Web Agent Launch Page Message (or URL):
Network Security Notice: This network is protected by the Cisco NAC Web Agent, a component of the Cisco NAC Appliance Suite. The Cisco NAC Web Agent ensures that your computer meets the requirements for accessing this network, and helps you keep your computer secure and up-to-date.
Please launch Cisco NAC Web Agent by clicking the button below.
Allow restricted network access in case user cannot use   NAC Agent or Cisco NAC Web Agent
          Restricted Access User Role:
role_engineer role_developer role_admin role_sales role_guest
          Restricted Access Button Text:
Restricted Network Access Message:
           Restricted Network Access: If you cannot use a Cisco NAC Appliance Agent, you can obtain restricted network access temporarily by clicking the button below.
Show Network Policy to NAC Agent and Cisco NAC Web Agent users (for Windows only)
          Network Policy Link:
Logoff NAC Agent users from network on their machine logoff or shutdown after
    secs (for Windows & In-Band setup, for OOB setup when OOB Logoff is enabled)
     (Setting the time to zero secs will logout user immediately. Valid range: 0 - 300 secs.)
Refresh Windows domain group policy after login
(for Windows only)
Automatically close login success screen after
    secs
     (Setting the time to zero secs will not display the login success screen. Valid range: 0 - 300 secs.)
Automatically close logout success screen after
    secs
(for Windows only)
     (Setting the time to zero secs will not display the logout success screen. Valid range: 0 - 300 secs.)

AppStore featured not working

AppStore featured not working....

update to the latest ios if u dont hav ios 6. im sure it will work

Just updated to Iphoto 9.1.3 but the slideshow feature not working

Just updated to Iphoto 9.1.3 but the slideshow feature not working at all. Screen goes white but any features selected, nothing is produced .The themes preview windows are blank too. is there something missing?

Sounds like it.
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store you can find it in your Purchases List.

My ipad Apple ID is not working it's showing that can't connect to App Store please help me

My Apple ID is suddenly not working it's showing can't connect to App Store. I am facing this problem from this morning & at the beginning it showed not trusted ip. Please help me

Same problem as well...getting very frustrated

My wifi is greyed out my bluetooth n hotspot is not working and its showing problem in resetting all setting plez help.. :(

my wifi is greyed out ..my bluetooth n hotspot is not working and its showing problem in resetting all setting plez help..

Hello Prakharfromindia,
Thank you for using Apple Support Communities.
For more information, take a look at:
iOS: Wi-Fi settings grayed out or dim
http://support.apple.com/kb/ts1559
iOS: Troubleshooting Bluetooth connections
http://support.apple.com/kb/TS4562
Use iTunes to restore your iOS device to factory settings
http://support.apple.com/kb/ht1414
Have a nice day,
Mario

I have just got my first apple device, iphone 3G S. After iserting sim it does not work, cant go beyond first screen. How to activate? I am in Delhi, India.

Hi,
I have just got my first apple device, iphone 3G S. After iserting sim it does not work, cant go beyond first screen. How to activate it? I am in Delhi, India.Any suggestions.
Satish

would be best if you can download the guide here
http://support.apple.com/manuals/#iphone

HT1937 I have installed an app : Birdfield guide in my iPhone 4. But the app is not working after installation. It shows black screen when opened

I have installed an app : Birdfield guide in my iPhone 4. But the app is not working after installation. It shows black screen when opened. I need suggestions to make it work or the reasons for not working.

Yes TeeKnows, try deleting it and download it again. After finished installation if still shows black screen delete it out off 'running apps' by double tapping the home button and swipe it off. If still shows black screen then try fully turning off your iPad (holding the sleep button) and turn back on again.
I hope I helped
thanks
Lydia

Samsung Serie 7 ultra: 3D Features not working, Liquify Filter shows black screen

Similar Messages

Maybe you are looking for