SAP 4.7 to ECC6 EHP5 Upgrade inc.OGSD - "/ICO/MOC_NEW_GUI" nametab error

Hello all,
I'm currently running a SAP upgrade from 4.72 to ECC6 EhP5 SPS6.
This upgrade include OGSD upgrade from4.72 SP12 to OGSD 6.10 SP5.
Duing phase upgrade phase RUN_RSPTBFIL_DEST, I have the following error message : Could not read nametab "/ICO/MOC_NEW_GUI".
According to OSS note 1377262, I download fix A61000INOGSD.SAR and extract file A-61000INOGSD.SAP in <upgdir>/cofiles (and also in <transdir>/cofiles).
Phase RUN_RSPTBFIL_DEST is still in error when I repeat it.
I note that content of A-61000INOGSD.SAP file is a little bit different regarding my error message:
Inside file:
I 2EETW109 table "/ICO/MOC_NEW_GUI" does not exist in nametab.
My error message:
2EETG011 "[DESTINFO] Could not read nametab""/ICO/MOC_NEW_GUI"
Many thanks for your help & feedback,
Chris

Hello Chris,
we experienced the same issue as you.
After discussion with the SAP Support team, it appears that this migration path is not the good one.
The right procedure is now to upgrade to ECC6 EhP5 with OGSD 6.10 SP0 and then to apply manually the SPs you want on OGSD add-on.
I think they are currently updating the corresponding OSS Notes.
I hope it will help.
Vincent

Similar Messages

  • Follow up activities after SAP (CU&UC) upgrade from SAP 4.6c to ECC6 EHP4

    Dear Friends
    We have completed SAP (CU&UC) upgrade from SAP 4.6c to ECC6 EHP4.
    We refereed the upgrade guide for follow activities and we required confirmation before performing the activities.
    Could you please help us what needs to be done immediately after upgrade.
    Regards,
    Bharathi

    Dear Nils,
    Thanks for the support.
    Yes, we are following the same document 'CUUC46C_to_NW701SP07' for unicode conversion after the upgrade from the note 928729.
    Please suggest us in that document which are the steps should be carried out after ECC6.0 EHP4 upgrade,
    1. Preparation
    2. Unicode Preconversion Phase in SAP Basis 4.6C
    3. Upgrade Process
    4. Unicode Conversion Phase
    5.  Unicode Conversion Completion Phase
    6. SAP Notes
    Regards,
    Bharathi

  • Impact of upgrading SAP 4.6C to ECC6.0 to Java application

    Hi,
    Currently, my Java application is:
    1. using SAP 4.6C as backend
    2. using Java 1.4
    3. using SAP Enterprise Connector in SAP Netweaver Developer Studio 7.0.15 to generate the BAPI proxies
    4. using JCo 2.1.8
    If now the backend SAP system is going to be upgraded from 4.6C to ECC6.0, will there be any changes required on my Java application i.e.
    1. Is the BAPI proxies generation process with SAP Enterprise Connector remain unchanged?
    2. Are the BAPI structures remain the same that do not require any Java code change when calling BAPI?
    3. Is the JCo version remains unchanged?
    4. Is there any Java code changes required?
    Thanks!

    Hi,
    1. Is the BAPI proxies generation process with SAP Enterprise Connector remain unchanged?
    Yes. No change required except minor changes.
    2. Are the BAPI structures remain the same that do not require any Java code change when calling BAPI?
    Well you will have to check if the BAPI import/export/tables/changing parameters have undergone any change. If not then no change required.
    3. Is the JCo version remains unchanged?
    Yes. This shouldnt be an issue.
    4. Is there any Java code changes required?
    Well if your 4.6c system was non-unicode, ECC 6.0 would be unicode. So the RFC where you would have mentioned that a Unicode(java) system is interacting with Non-unicode(4.6c) system will require a change. This is applicable to both RFC's in SAP & Java.
    Thanks,
    Best regards,
    Prashant

  • SAP R/3 4.6B to ECC6 EHP4 Upgrade

    Hello,
    We are on SAP R/3 4.6B and are in the process/plan of Upgrading to ECC 6...
    Is it possible to directly go to EHP4 in a single downtime..?
    I am trying to finf the Source/DVD's from the market place but unable to locate one...
    Is it possible or should we go to EHP3 only?
    If someone has link/path for the software download , kindly help...
    Thanks,
    RaHuL...

    [http://service.sap.com/swdc|http://service.sap.com/swdc]
    - download
    - Installations and upgrades
    - installations and upgrades - Entry by Application Group
    - SAP Application Components
    - SAP ERP
    - SAP ERP Enhance Package
    - EHP4 for SAP ERP 6.0 / NW 7.01
    Here you should read the info page carefully.
    Download the Master Guide and read it to find out about how to perform the upgrade.
    - Installation and Upgrade
    - <Database Platform>
    There is your media. Please note that it is both Installation and upgrade media
    and also both ERP and SRM media
    In order to get the kernel etc you have to select (instead of "Installation and Upgrade --> Database Platform")
    - SAP EHP1  FOR SAP NETWEAVER 7.0
    - Installation and Upgrade
    - <Operating System>
    - <Database Platform>
    There is your media together with installation and upgrade for the Netweaver platform (used when upgrading BI etc).
    Please note that you also need the Maintenance Optimizer configured in Solution Manager in order to download
    (actually you approve them for download) support packages etc from the Service Marketplace.

  • ECC EHP5 upgrade:is i mandatory to upgrade netweaver portal & BI systems

    Hi Gurus,
    Currently we  are having landscape of :
    1.SAP ECC6.0 SP stack at 17
    2.Netweaver Portal 7.0  SP stack at 17
    3.Netweaver BI 7.0  SP stack at 12
    Currently, viewing BI reports using Portal.
    We are planning to upgrade our ECC 6.0 system only  to EHP5
    My questions are:
    1. Is it mandatory to upgrade netweaver portal and BI systems also.
    2. We are very less dependent on BI.  So, can we continue with the same old BI system with ECC6.0 upgraded to EHP5?
    Please shed some light on this.
    Thanks in Advance.
    Regards
    Balaji Nampally

    There is no any specific details available for the same.. But it seems some BPs need to be upgrade on portals side..
    SAP ESS 603(SP06)                                 BP ERP05 ESS 1.41
    SAP MSS 600(SP17)                                 BP ERP05 MSS 1.51
    SAP PCUI_GP 603                                 BP ERP05 COMMON PARTS 1.51
                                                          BP ERP05 HR ADMINISTRATOR 1.51
                                                          BP ERP05 SELF-SERV ADMIN 1.0
                                                          BP TECHNICAL INFORMATION 1.51
    Pl provide if any has more details.. we are also looking for the same..
    Thanks

  • MD04 and CO09 are not matching after EHP5 upgrade

    Hi all,
    we have changed to ECC6 EHP5 and now we have the following problem:
    When we are using transaction CO09 we are not able to see old purchase orders.
    When we are going into the purchase order and change the quantity, they will appear in the CO09.
    In MD04 everything looks like befor the EHP upgrade.
    Any ideas?
    Kind Regards
    Dirk
    Edited by: Dirk Drössel on Jul 20, 2011 12:35 PM

    Thanks a lot, that was the solution.
    Regards
    Dirk

  • SAP Bunisess Connector 4.8 -Can support SAP 4.6C and ECC6 at the same time

    Hi All,
    I am upgrading Busniess Connector 4.0 to 4.8 .
    I have sap 4.6C systems and ECC6 systems in Landscape.Will Business Connector 4.8 support both (SAP 4.6C and ECC6) simultaneously ?

    Hello gaurav,
    I have tried re-installing.
    I am able to open the web-admin and also all the links except the ones in the adapters section.
    I have checked the installation document, adapter guide for BC 4.8 but i couldnt find anything useful.
    I was just wondering if it has got anything to do with the OS.
    lemme know if you have come across anything like this.
    thanks for the help.
    Sreejith

  • During EHP5 Upgrade some screens for infotypes are deleted

    Hi,
        During the EHP5 Upgrade, we found some of the screens of infotypes got deleted.  Those screen numbers are <9000.  Any guessess on why these screens deleted?  Is it becoz of SAP reserved namespace or any other reason?  What should be best solution to make sure that these screens are not deleted while upgrade?
    Regards
    Sravan

    Dear Sravan,
    Regarding this issue i would suggest you to create an OSS message with us with the R/3 connection to the system opened.
    Regards,
    Abhishek

  • CProjects access in ECC6 EHP5

    Hi,
    Recently we installed IDES ECC6 EHP5, and I tried to access cProjects URL, by calling webdynpro DPR_MAINFRAME but i dont see the cProjects under it, I used to get the cPRojects URL in earlier EHP's like EHP4 and EHP3 from DPR_MAINFRAME. but i dont find it in EHP5. then I surfed to SICF and called cproject URL by testing a service... the URL is <hostname>.<domain>:port/sap/bc/webdynpro/sap/cprojects . I can log in to the cProject, but once i log in i dont see the menu to create project or open existing project. I can see button for creating simulation/versions, tabs like structure, resource, accounting, DMS etc.,...but dont find a menu for creating/opening the project. It seems there is been a change in EHP5 regarding cprojects. So, Can you please let me know how to access/work with  cProjects in EHP5 System.

    HI,
    Withh ECC Enhp5, SAP PPM version must be SAP PPM 5.0 Check the version in your landsacpe. And in PPM 5.0, the url link has got changed for cProjects. The link is as below
    <Protocol>://<Host>.<Domain>.<Extension>:<Port>/sap/bc/nwbc/SAP_BPR_PPM
    Proper additional roles need to be assigned to access SAP PPM. Refer to the configuration guide for SAP PPM 5.0
    Regards
    Amit

  • Impacts on ECC6 Functional Upgrade

    We have just technical upgraded our SAP ERP 4.6 to ECC6 recently, we're soon going to perform the functional upgrade of the ECC6.
    I would like to check if the ECC6 functional upgrade will have any impact to our existing BW 3.5 system?
    Please advice, thanks.

    i dont think, the new plugins will impact your BI system. if you go for the technical upgrade, this may break your source system connection and that time you have to do source system restrore connection.
    Other than that, no major impacts would be happened in the BI system.

  • ECC6.0 Upgrade and BW Extractors

    Hi Experts,
    We are doing a Source system upgrade from 4.6c to ECC6.0 just a Technical upgrade. Can you please let me know if we need to delete all the delta queues and re-initialize delta.
    Following are the 4.6c Pre- Export Activities  in relation BW.
    1. Lock the users
    2. Clear the entire delta queues in RSA7 (till we achieve - 0 records in BW) and  make sure no outbound queues are empty in SMQ1
    3. Delete Set -up table data.
    4. Reshedule V3 Jobs
    5. ReSchedule - BW process chains
    After upgrading to ECC6.0
    1. SM59 connections with new system.
    2. Restore Source System connections in RSA1
    3. Replicate DS and Activate Transfer Structure. (In relation to BW: we have done the technical upgrade from 3.x to BI7.0 (but the datasoucre and data flow are still 3.x).
    After all Post processing of ECC6.0 Upgrade activities, the source system is only available to users for posting the transaction.
    Please let me know if we need to delete all the delta queues and re - initialize delta.
    1.We are not installing any new business content extractors from ECC6.0 - Just using same 4.6c extractors and structures.
    2.And consider that no users post any transaction after clearing the delta queues in RSA7.
    Appreciate your feedback,

    Hello Subbu,
    There is no need to reinitialize the extractors, the steps you mentioned in your original post are enough, the reason
    for these steps is to make sure that there is no data left in sm13, lbwq, ras7, setup tables etc, you need to run the related infopackages twice on the BW side to clear the BW repeat part of the queue in RSA7, if you have a doubt that this was
    not done you can goto rsa7, select the queue and on the next screen you can check if there is any data available in the
    delta repeat part of the queue.  
    The reason for the step is that that the upgrade could potentially change an extract structure for a datasource and then if you
    have data in the old format it may not be possible to upload it in the old format.
    I repeat though there is NO need to delete the current entries in RSA7 and reinitialize.
    Best Regards,
    Des

  • CO09 wong result after EHP5 upgrade

    Hello
    after a EHP5 upgrade the availability check with storage locations does not work anymore.
    We have stock on storage location 0001. The availability check selects sometimes also orders from storage location 0005 and calculates a wrong ATP value.
    Did somebody else had this phenomenon again? Is there a solution?
    Thanks in advance.
    Best regards
    Markus

    Hi Noel,
    thanks for that hint. We have already this not in our system.
    The result was a simple material master data bug. The user did not type 1 into the dispo view of this material.
    Best regards
    Markus

  • ALV Layouts are missing in ECC6 after upgrade

    Dear Friends,
    we have an issue of missing ALV Layouts in ECC6 after upgrade of ECC6 from 4.7 version
    For example, we have a custom table ZRCILOT, data displayed using tocde se16, but when we check layout are missing in ECC6 but the same exist in 4.7 version.
    please check the attached screen-shots.
    kindly suggest, is there any possibility to retrive it.
    Thanks,
    Munvar Basha.

    Hello
    Variants should be preserved by the upgrade...
    You could export/import layout using the report from the here under note
    Regards
    551178 - FAQ ALV Layout
    During the upgrade of or when importing Support Packages?
    Answer: Layouts created by the customer are retained and you can continue to use them.
    643330 - ALV layout: Importing and exporting layouts

  • Excel layout changed after EHP5 upgrade from EHP4.

    Hi All,
    We have just finished the EHP5 upgrade from EHP4 for ECC 6.0 for our production system. BUT we noticed that The standard layout, (also known as Dynamic List Display) has been chagned in EHP5 compare to EHP4.
    This is affected us as we have lot of macros enable for the excel files.
    Request you all to help. Is there any sapnote, anyway we can resolved this issue.
    Thanks

    Hi Markus,
    Thanks for reply.
    I not sure how i can attached file over here? Is there anyway to attached files in the forum?. I have the before and after image of excel file.
    But the position of the data which is downloaed in the excel sheet has been changed after upgrade. For example ,Before upgrade the column named "Description" in the production plan report was in the second column i.e. B where as after upgrade the "Description" column in the production plan report is in the first column i.e. A.
    I mean the postion of the data changed in after upgrade. Therefore macro which are enable are not working anymore.
    New Format Example
    Production plan          
    Description                        Material                               Sales doc.
    IRB 2600 M2004                 3HAC020536-018              104861
    IRB 2600 M2004                 3HAC020536-018              2BT0615486
    OLD Format
    Production plan                    
                                          Description                    Material                               Sales doc.
                                          IRB 2600 M2004            3HAC020536-018               104861
                                          IRB 2600 M2004            3HAC020536-018               2BT0615486
    Hope this above will help to make it clear.
    After checking this message ... the output example given above seems to be not showing the way i itend to... But in above example in the old format the Description column was at column B instead of column A after upgrade.
    Thanks
    Edited by: deepak.shinde on Oct 11, 2011 8:34 AM
    Edited by: deepak.shinde on Oct 11, 2011 8:36 AM

  • Syntax error. SAP 3.1 version - ECC6

    Friends,
    Following statement given syntaxt error in ECC6.
    It is working fine in SAP 3.1.
    I need to copy the code from SAP 3.1 to ECC6.
         DO VARYING l_char FROM l_text2+99
                                        NEXT l_text2+98.
    Please help me in this regard ASAP.
    Thanks in advance.

    I was able to get the following to work:
    DO 100 TIMES VARYING l_char FROM l_text99(1) NEXT l_text98(1) RANGE l_text.
    ENDDO.
    I had to add the "100 TIMES" or the loop continued beyond the range of the variable and short-dumped.
    Hope this helps,
    Mark S.

Maybe you are looking for

  • Disk space almost full

    I have a G4 imac running Tiger. Since my son was born last December I have increased my iphoto library by about 4000 images. Subsequently I have only 1.5GB left on my hard drive. I have backed up approximately 6000 images onto 6 DVDs (2 copies of eac

  • Difficulty in Activating CS5.5 Design Standard

    I am getting really frustrated with the difficulty of activating my Creative Suite 5.5 and am wondering if anyone with sufficient technical knowledge can assist me. I purchased and installed my CS5.5. around a week ago, and have been using it every d

  • PS CS5 Raw Editor

    I have just upgraded from CS3 to CS5. Where is the "Select All" panel on the left hand side of the editor and I cannot load multiple images into the editor either, only one at a time. Regards, Doug.

  • Delete MIC

    Dear QM Exert, I want to Delete the MiC but when i Delete Through QS25 Then this messae show. No validity period was selected for master inspection charac. CD1014 1000, Please help me in this issue. Thanks & Regards, Umar Farooq

  • Sales Values Aging

    Experts, I am using Custom Multi provider using Retail Customer and Material Movements cubes. I want to show the report like Sales value - Last 7 days value , Last 15 days value, but I unable show this values in bex report. I am not aware of how to c