SAP APO 5.0 Assignment Table and Like Profiles

Hello,
Is the any way to extract all the entries in either of the like profiles or the assignment table.
I tried the System -> List -> Save but all the options are grayed out.
Any feedback wold be greatly appreciated.
Thanks

Hi,
    I am not sure which entries you want exactly...However there are couple of tables related to like profiles in which LIKEID is there.
/SAPAPO/DP440G- Master Forecast Profile (APO0300)
/SAPAPO/FCST_LC -  Assignment Table: Lifecycle Profiles to Charact. Value
/SAPAPO/FCST_LC1 - Assignment Table: Lifecycle Profiles to Charact. Value
/SAPAPO/T445LIKE -  Table for LIKE Dependencies
/SAPAPO/T445LIKK - Header Table for LIKE Dependencies
/SAPAPO/T445LIKT - Text Table for Like Profiles
/SAPAPO/T445LIPR - Table for Life Cycle Planning
I hope this will help you at some extent..
Regards,
Saurabh

Similar Messages

  • APO DP - loading of selections and forecast profiles assigned to selections

    I am using APO DP V5.
    I am forecasting at a 'product at customer' level.
    I have a flat file containing the 'product at customer' combinations - of which there are several thousand - and the proposed forecast profile for each combination.
    Is there a good way for:
    1.  loading these combinations as a set of 'selection ids' into APO DP?
    2.  loading the set of 'selections assigned to forecast profiles'
    I note that the 'selections assigned to forecast profiles' are in table /sapapo/dp_fcst2, but this table includes the GUID for selection ids, so I assume the selection ids must be generated first.
    Thanks for any advice.
    Regards,
    Bob Austin

    Hi Bob,
    There was a similar question asked sometime back in this forum, and am attaching the replies given to that.
    Re: APO DP assignment of selections to forecast profiles
    Check this link, it might help you.
    Regards,
    Jagadeesh.

  • Details on SAP Warehouse management? Basics, tables and transactions?

    Hi
    Soon i will be working on a SAP WM module as a abaper. I have worked on SD and MM modules but not worked on WM module.
    Can anybody send me the links or guide me where i can find some basic information about SAP warehouse management?
    I am looking for the following.
    1). the complete process cycle in WM
    2). basic tables used in WM
    3). Basic transactions used in WM
    thanks in advance.

    check
    https://forums.sdn.sap.com/click.jspa?searchID=12324135&messageID=4538695
    https://forums.sdn.sap.com/click.jspa?searchID=12324135&messageID=2829284
    Re: WM Flow
    Regards
    Kiran Sure

  • SAP note 1483283 -Default DIR_PUT directory and Defalt profile

    Hi Experts,
    We are doing solution manager upgrade and facing the same issue as discribed in SAP note 1483283
    When I try to run the command at OS level -
    tp unlocksys SM9 pf=usr/sap/trans/bin/TP_DOMAIN_SM9.PFL
    I am not sure what to do with command unlocksys as it is not taking default profile for TP-which profile we should use as we have not created any seperate directory, what would be the directory for DIR_PUT and what would be the default.tpp profile.
    Solutions are highly appreciated.
    Regards,
    Sabita

    Hi
    1)the correct command should be
    tp unlocksys pf=(DIR_PUT)/bin/DEFAULT.TPP
    2) Normally while upgrade you lock all the users except sap* and ddic, Unlocksys command will unlock the system means all allow the users to login
    3)DIR_PUT is the root directory for R3 upgrade,this is the one where the temporary data required for the R/3 upgrade is stored. The logs written during the upgrade are also stored there.
    plese check AL11 for the value of this parameter.
    Thanks,
    Jansi

  • Any good books on SAP APO?

    Hi,
    Is there any good book out there that I could buy to start leaning SAP APO (esp the DP, PPDS and SNP modules) ?
    Thanks

    Recommanded book for APO DP & SNP
    1) Sales and Inventory Planning with SAP APO
    by Marc Hoppe
    2) Production Planning with SAP APO-PP/DS
    by Jochen Balla and Frank Layer
    3) Production Planning and Control with SAP
    by Jörg Dickersbach, Gerhard Keller, and Klaus Weihrauch
    Another good source is the SAP help portal for mySAP Supply Chain Management. The latest version of SCM 5.0 documentation for configuration would be very helpful. Try the link below.
    http://help.sap.com/saphelp_scm50/helpdata/en/7e/63fc37004d0a1ee10000009b38f8cf/frameset.htm
    Sanjay

  • Generate the tablespace clause for tables and indexes

    How can I make Designer generate the tablespace clause for the create table and create index statements?
    I assigned tables and indexes to Tablespaces objects in designer but they don't seem to have any effect on the generator.
    I am using the latest version of Oracle Designer.
    Thanks
    Message was edited by:
    bikerc

    Guess I am not real clear what you want.
    In the DB admin tab you will need to create the tablespace with the data file.
    Then you need to assign the table space to the table.
    You will need to generate from the DB Admin tab.
    Hope this helps.
    Michael

  • Error in like profile and modeling

    Hi
    could any one make me clear, the difference between like model and like profile,  i know about like profile, i want to know how like model works
    Thanks for supporting me
    Regards
    Deepali

    Dear Deepali
    Please find enclosed herewith the links with detail explanation for
    Like Profile
    http://help.sap.com/saphelp_scm41/helpdata/en/8f/9d6937089c2556e10000009b38f889/frameset.htm
    Like modeling
    http://help.sap.com/saphelp_scm41/helpdata/en/07/873abc4c091d48b725a5500d177524/frameset.htm
    Thanks
    Amol

  • SAP APO with SAP BW

    Hi All,
    We need to integrate SAP APO with SAP BW. Does any one know what an APO is? If there is a document which provides an overview of what an APO is,
    (or) bulk document sap apo with sap bi ppt.
    Thanks in advance.
    Gopi. G.

    hi,
    SAP APO is for Demand Planning and is a component of mySAP SCM. It enables dynamic supply chain management and which in turn includes applications for detailed planning, optimization and scheduling, allowing the supply chain to be accurately and globally monitored even beyond enterprise boundaries.
    Check the link for info on APO
    http://www.sap-img.com/sap-apo.htm
    The following link gives complete information about APO,
    http://help.sap.com/saphelp_scm50/helpdata/en/92/dd013872af2946e10000009b38f8cf/frameset.htm
    See this thread
    Re: SAP APO
    Additional inputs :
    APO refers Advanced planned and optimizer
    APO is similar to BW in the sense it is also a OLAP processor intended for reporting needs
    Award pts if helpful

  • I want to  sap apo tickets

    hi,
    this is prasad from bagalore ,i am learning sap apo, plz send me  sap apo tickets and sap apo implemetatoin roles.
    Regards and thanks
    prasad

    Hi,
    Please gothrough Wiki pages related to SCM...as a starting point.
    Are you refring APO ticket for APO application support project?

  • Unable to Assign Service Profile and Response Profiles to Service contract

    Hi All,
    I am creating a new Service contract but unable to assign service and response profile in the Item details of a service contract.
    The serice and response profiles are in display mode they are greyed out.
    any ideas...
    Regards,
    Raj.

    Hello, please ignore I've replied to the wrong posting.
    Cheers
    Message was edited by: Andrey Bondarev
    Message was edited by: Andrey Bondarev

  • Reg Like profiles

    Hi All
    One of the user created like profile and phase in/out profile.. now they were deleted.. we need to see the profiles again. is there any process to get the deleted like profiles..
    Regards
    Tgs

    Hello
    Please check if you have an entry for deleted like profile into below tables.
    /SAPAPO/T445LIKE               Table for LIKE Dependencies
    /SAPAPO/T445LIKK               Header Table for LIKE Dependencies
    /SAPAPO/T445LIKT               Text Table for Like Profiles
    /SAPAPO/T445LIPR               Table for Life Cycle Planning
    Database tables in APO for phase in/out profiles
    /SAPAPO/PHASESRV PSM Service Profile for Phase-In/Out Planning
    /SAPAPO/PHINGR Phase-In Group
    /SAPAPO/PHINGRT Text Table for Phase-In Group
    /SAPAPO/PHINPRF Phase-In Profile
    /SAPAPO/PHOUTGR Phase-Out Group
    /SAPAPO/PHOUTGRT Text Table for Phase-Out Group
    /SAPAPO/PHOUTPRF Phase-Out Profile
    /SAPAPO/PHOUTSRV PSM Service Profile for Phase-In/Out Plann
    /SAPAPO/PHVALUE Value Table for Phase-In and Phase-Out Profile
    If yes, Check if ABAP can do some magic. Or else check with SAP OSS.
    Hope this helps.
    Thank you
    Satish Waghmare
    Edited by: SatishW on Apr 8, 2011 11:09 AM

  • T-code or Table to find total errors in SAP APO like ST22 in ABAP

    hi all,
    Could please tell me the T-code or Table to find total errors in SAP APO like ST22 t-code in SAP ABAP.
    Thanks.
    Suryam S

    Hello Venu,
    Do you mean other functional errors?
    You can check SLG1, /SAPAPO/C3, STAD
    Best Regards,
    R.Brahmankar

  • How to protect SAP Application Tables and Reports in R/3

    Hi Gurus,
                 Any one please explain me detail how to protect tables in R/3 with different senarios.
                  How to protect reports in SAP R/3 without assigning SA38 transaction access
                  How to protect Program in SAP R/3 in R/3

    Hello Happyman,
    <b>What do you mean by Protect Table, Program and Report?</b>
    Let me ask you one base Question, On which area are you working? Are you from functional side or Technical side (Developement or Basis guy)?
    This is very clear cut answer that with the restricted autorization you can protect table and programs. Do not provide the change autorization.
    CATCH your BASIS guy and he will do rest of the things. Just explain him what are you want to protect.
    Hope this helps.
    Regards
    Arif Mansuri

  • SAP APO and WM

    Hello All,
    Is it possible to put some warehouse related controls and limitations in SAP APO (SCM) without having EWM? For example, a certain warehouse can only process 300 orders and if anyone tries to place order beyond 300 then it automatically pushes the CGID to next day?
    Second example can be on availability of truck? If the Truck leaves Warehouse only twice a day for a certain customer, then APO (SCM) automatically place the order on those two days?
    Thanks,
    Ali

    Ali
    You might be able to get GATP to meet at least some of your requirements with some creative thinking and enhancements. Standard GATP does not consider warehouse (field is not transferred from ECC to GATP during the ATP check), so you would add that to the field catalog through an enhancement (relatively simple). You could then use Product allocation functionality to limit the warehouse to 300 orders per day. Standard product allocation functionality is based on order quantities, not number of orders, so you would need an enhancement to modify this behaviour (sounds simple, but you would have to explore).
    I don't understand what you mean by 'CGID', but you could get GATP to commit material availability dates based on warehouse limitations (push out material availability date based on next available free 'slot' in the warehouse). As long as you run the delivery due list with a short (say 1 day) window, this might work.
    Configurable Process Scheduling (CPS) functionality within GATP may also work for your requirement of 'truck leaving warehouse only twice a day to a certain customer' - using customer-specific condition tables for transportation activity calendar determination.
    One thing to remember is that GATP works only on commit dates of Orders (Sales Orders/ Stock Transport Orders), it doesnt directly influence actual pick/ pack/ ship activities in the warehouse (it does affect warehouse operations indirectly .)
    Rishi Menon

  • How to assign SAP forms in FB50, F-28 and F-53

    Greetings for the day,
    Actually my client's business is like retail business so they are accepting daily N no.of payments from their customers. Now my problem is they need a print receipt for each transactions and that to be according to their own format. Not only for the payments but also for all the transactions whatever they are entering in the system. So you tell me how to set SAP script forms to these transaction code like in fb01, f-02, f-28, f-53 etc.
    Note : I have already suggested them about T.code : f.62 but they are not ready to go in another T.code for print. They need print option with in the same T.code in which they are posting the transaction.
    Regards,
    Vinod

    Dear:
                This can be achieved through SHD0.. You can disable posting button in these t code using SHD0. Please follow the procedure given as
    Go to SHD0...In t code write FB50...Transaction Variant..ZFB50...Click create ... Now enter document date as soon as you enter document date just press enter ... A new box will appear .. There will a button at its bottom--Menu Function...Click it...A new screen will appear...In it go to menu Bar...document.. There you will see post click on it and press F2..now it will be deactivated..Exit and save..Give Package that ABAP use and save it again and again until it shows that the changes have been saved.. Now you will see this ZFB50 in Standard Variants tab of SHD0.. Activate it.
    Do the same thing for F-02. So you simply have to create Z screen variant and assign them to t code.
    It will do the job for you.
    Refer to the link i posted earlier regarding disabling parking button in FB50
    Re: FB50 - disable PARK icon
    Regards

Maybe you are looking for

  • Nothing happens sending some pics and videos iMessage

    I communicate with a few people using iMessage with iPhone 4.  Since IOS 7.0.3, some pictures and some videos will simply not send and nothing shows up in the history.  No indication of an error.  It doesn't show up in the message list and doesn't se

  • TS1372 I have a 1439 error on my Ipod, I have done all that is stated, but my Ipod is unable to format and cannot be detected by itunes, kindly help pls

    I have a 1439 error, my Ipod is not been detected and I have formatted the Ipod, but it is suggested on Itunes and windows to format the Ipod before putting it to use. but it does not format again. I have done all the steps stated in the TS1372 KINDL

  • 'New Structure' in the Query Designer

    Hi,       I know these questions might be very silly but i want to get the best picture about reporting in BW. Is there a restriction that we could create only 2 new structures in both rows and colums or isn't there any rule.Any kind of explanation w

  • KEY-ENTQRY raised unhandled Exception

    Hi, In master details form, I try to filter record through pre-query and the condition is as follows v_sql_string := '( select K.CLIENT_ID, K.VISIT_ID,K.SERVICE_CD, k.Visit_Dt, k.Visit_type,k.Consultant,k.service_descr '||                ' from ( sel

  • Workflow issue

    Hi Experts, We have recently done an upgrade from 4.6c to ECC 6.0. One of the Order change workflow is triggered & mail is sent to the person who has executed it. But the agents which are assigned to it dont receive the mail. If we check in SWI1 -> W