'SAP_APPL,600 has to be installed' when try to install SAP ERP EnHP3

Hi,
I'm trying to install EHP3 on windows2003/oracle10.2/SAPecc6.0 by tools SPAM & SAINT.
But the system send the message 'Component SAP_APPL,600 has to be installed'
I want download the 2 packages:
"SAP enhancement package 1 for SAP ERP 6.0"
"SAP enhancement package 2 for SAP ERP 6.0"
But I have not find there in the SAP's Portal
I found only:
    SAP ERP ENHANCE PACKAGE
          SAP ENH PACK 3 FOR SAP ERP 6.0
          SAP ERP ENHANCE PACKAGE 2005.2
I have a pack of DVDs 'SAP ERP 6.0 SR3' which contents:
- upgrade master (51033520)
- installation export (51033500) 2 dvd
- ERP components (51033525)
- Upgrade export (51033501) 3 dvd
- Langage (51033496) 2 dvd
- Documentation SAP ERP (50085424)
Do you explain how and where I can dowload and install the component SAP_APPL,600
Thanks.

Hi,
EHPs are cumulative, you should only install the parts from the latest EHP (=EHP3).
There is no need (and benefit) to install EHP1 or 2.
The download should be done using Solution Manager Maintenance Optimizer (not SMP) - here you get also a valid Stack XML generated which ist required to perform the installation.
More information here: The specified item was not found. or here: http://service.sap.com/~sapidb/011000358700001166742007E
Best regards,
Christian.

Similar Messages

  • Getting "setup.exe has stopped working" message when trying to install labview 2011 or 2012 on a windows 7 machine

    I am getting a "setup.exe has stopped working" message when trying to install labview 2011 or 2012 on a windows 7 machine. I already tried running setup.exe as an administrator with the same results. I have Microsoft .NET Framework 4.5.1 installed on the affected machine. Could this be the cause of this issue? Or does someone know the root cause of such error?
    Solved!
    Go to Solution.

    Hi - are you getting it at the start of installation, during or after 100% progress has finished?
    Is it just LabVIEW you're installing, or is it drivers too, in which case, what was the last large package that was installing at the time?
    This could be caused by the NVIDIA chipset driver :
    https://decibel.ni.com/content/message/46299?tstar​t=-130
    Thanks
    Sacha
    // it takes almost no time to rate an answer

  • Getting exit code 7 when try to install adobe CS5.5 on windows 7 64bit Machine

    Getting exit code 7 when try to install adobe CS5.5 on windows 7 64bit Machine

    Errors "Exit Code: 6," "Exit Code: 7" | CS5, CS5.5
    Mylenium

  • Error 1 when try to install adobe creative cloud

    error 1 when try to install adobe creative cloud

    Hi Alejandro,
    You can follow the article: Error "Failed to Install" Creative Cloud Desktop application which will help you to fix your issue.
    Let me know if it works or not.
    Thanks,
    Ratandeep Arora

  • Error message comes up when try to install Lync 2010 in a windows XP machine

    Hi everyone, this issue is from one of our customer, Ravi Hegde. The error message is " the procedure entry point EventWrite could not be located in the dynamic link lirary ADVAPI32.dll" when try to install the Lync 2010 client in a windows XP
    manchine.
    does anyone here meet the same issue before and share the solution? many thanks.

    Hi Alex,
    Please open an elevated command prompt and run the below command;
    sfc /scannow
    In the event that this doesn't work you might try some of the the below from reading;
    1.) jumping back to a realistic restore point that doesn't create a load of work for you in regards to program installation
    2.) performing a repair on the OS
    3.) Installing all outstanding windows and office updates as these often replace the existing DLL
    4.) Repair of Microsoft Office
    5.) clean OS install or image deployment
    Kind regards
    Ben

  • Error RW-50010 and RW-50004 - When try to install 11i on OEL5

    When i try to install oracle 11i on the OEL5, i have got the below error, can any one advice on this.......
    Below error in file :- 05061003.log
    Running Instantiation Drivers for /d01/Stage11i/startCD/Disk1/rapidwiz/template/adridb.drv
    instantiate file:
    source : /d01/Stage11i/startCD/Disk1/rapidwiz/template/adrun9i.sh
    dest : /d01/oracle/visdb/9.2.0/temp/VIS_oracleapp1/adrun9i.sh
    backup : /d01/oracle/visdb/9.2.0/temp/VIS_oracleapp1/adrun9i.sh to /d01/oracle/visdb/9.2.0/appsutil/out/VIS_oracleapp1/templbac/adrun9i.sh
    setting permissions: 755
    setting ownership: oracle:oinstall
    instantiate file:
    source : /d01/Stage11i/startCD/Disk1/rapidwiz/template/adrundb.sh
    dest : /d01/oracle/visdb/9.2.0/temp/VIS_oracleapp1/adrundb.sh
    backup : /d01/oracle/visdb/9.2.0/temp/VIS_oracleapp1/adrundb.sh to /d01/oracle/visdb/9.2.0/appsutil/out/VIS_oracleapp1/templbac/adrundb.sh
    setting permissions: 755
    setting ownership: oracle:oinstall
    Step 0 of 5
    Command: /d01/oracle/visdb/9.2.0/temp/VIS_oracleapp1/adrun9i.sh
    Step 1 of 5: Doing UNIX preprocessing
    Processing Step 1 of 5
    Executing: /d01/oracle/visdb/9.2.0/temp/VIS_oracleapp1/adrun9i.sh APPS APPS
    STARTED INSTALL PHASE : 9i RDBMS : Fri May 6 10:04:06 BST 2011
    runProcess_5
    Statusstring Executing Command: InstantiateFile -d addbtmpl.drv
    Cannot execute configure of environment for database ORACLE_HOME
    RW-50010: Error: - script has returned an error: 1
    RW-50004: Error code received when running external process. Check log file for details.
    Running Database Install Driver for VIS instance
    This error I got it in the file :- dbInstancecfg.log
    instantiate file:
    source : /d01/oracle/visdb/9.2.0/appsutil/template/adcctclean.sql
    dest : /d01/oracle/visdb/9.2.0/appsutil/install/VIS_oracleapp1/adcctclean.sql
    backup : /d01/oracle/visdb/9.2.0/appsutil/install/VIS_oracleapp1/adcctclean.sql to /d01/oracle/visdb/9.2.0/appsutil/out/VIS_oracleapp1/05061004/adcctclean.sql
    setting permissions: 600
    Executing script in InstantiateFile:
    /d01/oracle/visdb/9.2.0/Apache/perl/bin/perl -I /d01/oracle/visdb/9.2.0/Apache/perl/lib/5.00503:/d01/oracle/visdb/9.2.0/Apache/perl/lib/site_perl/5.005:/d01/oracle/visd
    b/9.2.0/appsutil/perl /d01/oracle/visdb/9.2.0/appsutil/scripts/VIS_oracleapp1/adchknls.pl
    script returned:
    Validating information needed for NLS........
    DATABASE version : db920
    No NLS specific checks required
    ERRORCODE = 0 ERRORCODE_END
    .end std out.
    .end err out.
    Executing script in InstantiateFile:
    /d01/oracle/visdb/9.2.0/appsutil/install/VIS_oracleapp1/afmkinit.sh
    script returned:
    afmkinit.sh started at Fri May 6 10:04:17 BST 2011
    The environment settings are as follows ...
    ORACLE_HOME : /d01/oracle/visdb/9.2.0
    ORACLE_SID : VIS
    TWO_TASK :
    PATH : /d01/oracle/visdb/9.2.0/Apache/perl/bin:/d01/oracle/visdb/9.2.0/bin:/usr/bin:/usr/sbin:/d01/oracle/visdb/9.2.0/jre/1.4.2/bin:/usr/ccs/bin:/bin:/usr
    /bin/X11:/usr/local/bin:/usr/bin:/usr/bin:/d01/Stage11i/startCD/Disk1/rapidwiz/unzip/Linux:/usr/bin:/usr/local/bin:/usr/kerberos/bin:/usr/local/bin:/usr/bin:/bin:/usr/X
    11R6/bin:/home/oracle/bin
    LD_LIBRARY_PATH : /d01/oracle/visdb/9.2.0/lib:/usr/X11R6/lib:/usr/openwin/lib:/d01/oracle/visdb/9.2.0/ctx/lib
    afmkinit.sh exiting with status 127
    .end std out.
    cp: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
    touch: error while loading shared libraries: librt.so.1: cannot open shared object file: No such file or directory
    .end err out.
    Skipping INSTE8_PRF
    Skipping INSTE8_APPLY
    [AutoConfig Error Report]
    The following report lists errors AutoConfig encountered during each
    phase of its execution. Errors are grouped by directory and phase.
    The report format is:
    <filename> <phase> <return code where appropriate>
    [SETUP PHASE]
    AutoConfig could not successfully execute the following scripts:
    Directory: /d01/oracle/visdb/9.2.0/appsutil/install/VIS_oracleapp1
    afmkinit.sh INSTE8_SETUP 127
    AutoConfig is exiting with status 1
    Edited by: user9220213 on 06-May-2011 02:26

    HI,
    Please check below note:-
    Installation of 11.5.10.2 On OEL Fails [ID 747424.1]
    Thanks,
    JD

  • When try to install get a dialog box asking for admin account even though current account is admin

    i'm logged into an account that has admin privledges. when i try to install FIrefox 5.0.1 get a "Run as" dialog box. when continue with current account or any other admin account the install quits with no warnings or messages of any kind.

    The Three Best Alternatives for Security Questions and Rescue Mail
         If you do not have success with one, then try another:
            1.  Send Apple an email request at: Apple - Support - iTunes Store - Contact Us.
            2.  Call Apple Support in your country: Customer Service: Contact Apple support.
            3.  Rescue email address and how to reset Apple ID security questions.
    A substitute for using the security questions is to use 2-step verification:
    Two-step verification FAQ Get answers to frequently asked questions about two-step verification for Apple ID.

  • Mac book pro saying no hard ware installed when try to connect to wifi

    My sons MacBook Pro started saying no hardware installed when he try's to connect to wifi. Any ideas? Not sure even where to go to try to reinstall software

    How are you attempting to connect to wifi?  Model of router/modem?  Airport bars showing and/or on or off?
    Bars look like one of these?
    Which model MBP do you have? 

  • When try to install an app, I get a msg "Not Compatible"

    There are some programs from the App Store
    when I click install I get a message saying:
    "Not Compatible
    This application is not compatible with this iPhone."
    Why??
    My friend has the same phone and she can download these applications.
    Thanx.

    I'm there.. well i posted on this problem, since o solved my other one
    now i know why i can't install apps on my iPhone.. hehehe
    i went under Hardware - USB
    USB high-speed bus
    iPhone
    is that it? if so..
    iPhone:
    Version: 0.01
    Bus Power (mA): 500
    Speed: Up to 480 Mb/sec
    Manufacturer: Apple Inc.
    Product ID: 0x1292
    Serial Number: 27e2f90***********200c
    Vendor ID: 0x05ac (Apple Computer, Inc.)
    what does that mean?

  • Hyper-V encountered an error trying to access an object on computer 'localhost' .....- When try to install new Virtual machin in win8, 64 bit

    am using windows 8, 64 bit system inside VMWARE in Ubuntu 14.04 . I have intel core i3 processor.
    I want to install WIndows-7 inside windows 8 as a virtual machine. SO I tried to use "HYPER V MANAGER" with elevated privilege. wHEN I TRY , NEW->VM Machine->'after some steps'-> when I press Finish I get following error,
    [Window Title]
    New Virtual Machine Wizard
    [Main Instruction]
    Hyper-V encountered an error while configuring the network on Windows7_32bit.
    [Content]
    Hyper-V encountered an error trying to access an object on computer 'localhost' because the object was not found. The object might have been deleted, or you might not have permission to perform the task. Verify that the Virtual Machine Management service on the computer is running. If the service is running, try to perform the task again by using Run as Administrator.
    [Close]
    my understand is: "we can use Hyper v, instead of Virtual box or as VMware player". I think in windows 8, hyper v server is not installed. does that is the problem? Why do we use it ?
    Actually I wanna configure Kernel Debugging over Virtualized COM port. So what can I do next ?  please help me...
    Note: Virtual Machine Management service  is running.

    Hi mrCracker,
    >>am using windows 8, 64 bit system inside VMWARE in Ubuntu 14.04 .
    If I understand correctly , it is nested installation .
    Windows Hyper-v is bare-metal hypervisor  .
    Please try to install win8 on real hardware then enable hyper-v to install VM .
    Best Regards
    Elton Ji
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • When try to install shows error message 'could not access %appdata%

    when i try to install itunes on my pc, shows me error message. 'could not access %appdata%
    so plz help me with that

    not sure it's the latest version but a simple google search helped me find it for you:
    http://www.softpedia.com/get/Security/Secure-cleaning/Windows-Installer-CleanUp- Utility.shtml
    anyways, you might want to wait until another user more versed in windows points you in the right direction.
    good luck !

  • How to detect IE is 64 bit when try to install flash player

    Hi Experts,
    Since there is no 64 bit flash player, I want to detect the IE version first before install flash player, a mesage would be shown if try to install flash player in 64 bit IE.
    I tried to use navigator.platform to check the IE version, but it doesn't always work.
    I found input http://www.adobe.com/go/getflash/ into IE, it would redirect into two different pages according to the IE is 32 bit or 64 bit.
    I don't know how to implment this
    Any suggestion is very appreciated.

    Any one can help me

  • When will UniverseDesigner support SAP ERP Tables,InfoSets and ABAP Func. ?

    Hi there,
    to the SAP guys in this Forum to keep the rumour mill running: is it planned to extend the connectivity of the Universe Designer to access to SAP ERP Tables, Infosets and ABAP Functions ?! Is there any date when this will happen ?!
    Thanks,
    Sebastian
    Edited by: smenzl on Apr 15, 2010 9:08 AM

    Hi,
    if you need an official statement i would recommend you open a SAP OSS Message for that.
    Regards
    -Seb.

  • T61p restart when try to install the system.

    Hello,
    I have replaced motherboard on my lenovo T61p, old one was broken ( nivida chipset was burned). But right now after replacing motherboard I'm able to turn it on, i can go to bios setting, run mem test from cd. But when I'm trying to install system (Linux,win 7, win xp) it 's restarting. On windows 7 i can see the first progress bar under the DOS but when the bar is loaded and nice blue windows should appear it restarting. On win xp I'm able to format the hard drive, copy the files to HDD but when it restart and run from HDD, I can see the progress bar " installing device" 39 min left, and restart.
    I have replaced Processor,memory, disconnected WIFI ,modem all unnecessary device but i still have this problem.
    Maybe someone has this problem before ?

    This is a longshot, but substitute a different harddrive if possible. If a drive is pulling to many amps, it will force the system down for lack of power. Any direct current motor, like in a harddrive could draw to much amps and cause this.
    This is theory, I've not actually seen a bad drive do this, but it's worth a try.
    If you don't have a drive to try, get a linux Live CD disc and boot from your optical drive without a harddrive. That should work , and if it seems stable, then you will need to find a known good trive to test.
    ThinkPad W-510 i7-820QM(1.73-3.06GHz) Quad Core... ThinkPad T500, T9900, 8gb SSD...FrankNpad T-60p/61p (X9000 2.8ghz) 8gb SSD ips FlexView...ThinkPad T-61p (T9300 2.5ghz) 8gb ram...Thinkpad X-61 Tablet 4gb ram...ThinkPad A-31 (1.9ghz P4 1.5gb ram)

  • Error when try to install windows 8.1 from UEFI USB

    Hello !
    I have prepared a UEFI USB flash drive installation for Windows 8.1, as described in this link :
    http://www.nextofwindows.com/how-to-make-uefi-bootable-usb-flash-drive-to-install-windows-8/
    The computer is on UEFI mode.
    Now the computer boot from the USB flash drive, but after some seconds, I get an error message on a blue screen:
    Your pc need to be repaired
    The application or operating system couldn't be loaded because a required file is missing or contain errors
    File \windows\system32\boot\winload.efi
    Error code :0xc0000359"
    It’s strange because the hard drive has no partitions, and the USB flash drive doesn’t have a path path like
    \windows\system32\boot\winload.efi.
    What is happening and what should I do?
    Thank you !

    Hi,
    When install Windows on UEFI mode, you need to convert your disk to GPT firstly. Therefore, please check if your disk was already converted to GPT partition style.
    On the other hand, you can access to the link below which talking about how to install Windows using UEFI partition style.
    https://technet.microsoft.com/en-us/library/dn336946.aspx?f=255&MSPPError=-2147217396
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Maybe you are looking for