SAP B1 Collection Report's crystal report layout printing format
Hi all,
We're having an issue in Crystal Report fro SAP Business One - for the Collection (aged-debt) report.
The report is basically doing the following when previewing it in SAP Business One.
It prints the header information etc on the first page and then the detailed information filling up the page as expected - it then prints more lines (not filling up the page - maybe 10 lines or so) from the detailed section to the second page (without any headers etc) - then the third page contains headers again with the detailed line data and the fourth then has a couple of lines but without any header data - and so on...
We've checked the standard page settings - all looks fine.We've checked the section expert - again can't see anything particularly bizarre. It's as though Crystal thinks the page is actually ending someway down the second page!
Has anyone come across a similar scenario and what would be the solution to this sort of issue?
Many thanks,
Mohsen
Hi Mohsen,
You may check Selection Expert - Paging tab to see if they have been changed. What is the setting for Report header and Page header?
Thanks,
Gordon
Similar Messages
-
Problem in connecting to Sap R/3 system through Crystal Reports
Hi
while I am connecting to Sap R/3 system through crystal reports i am getting an error
(" you do not have a necessary rights to design reports against sap system ")
can anyone sort out this problem?
Thanking in advanceyou need to add some transport files while installing the integration kit for sap solutions.check whether all transport files are added
-
Connecting SAP standard report with Crystal report
Hi all,
I've a SAP standard report S_ALR_87012284 using which I need to develop a dashboard using Xcelsius but before that I need
to build that report in Crystal reports.
Now is there any way to connect directly to SAP standard report from Crystal report ??
Thanks
JohnHi John
I am not sure about the link to a standard Report. I don't think it is possible, As far as I can work out the closest you will get to what you want in CR2008 is a link to Data Clusters, Data Dictionary and Function Modules CR. Perhaps someone with more experience than me can offer more insight though.
If your goal is to utilize CR2008 just for the ability to link to Xcelcius you should check out the following site, as it may help you approach your goal differently. This shows a great method for linking directly from Xcelcius to SAP.
http://enterprisegeeks.com/blog/2009/02/18/abap-freak-show-february-18-2009/
regards
Phillip -
Open ECC report in Crystal Reports
Hi,
Question, hope you have some info on this...
I want to try & open a custom report which is built in an ECC system (report is currently run as a "Yxxx" transaction) in Crystal Reports. Purpose is to further edit and format the report using Crystal Reports functions.
Does anyone know what path to follow here? Do I have to set up a new connection for the given source system?
Thanks for any tips advice.
Ps. I have Crystal Reports 2008 and also the BI Integration Kit (not sure if this is used / required).
Thanks,
WillemThere are transports that the SAP Integration Kit delivered. you may have already installed this on your BW, but they would need to be installed on ECC if you want to query there. Once these are installed, Crystal should be able to see an SAP - Table, Cluster, Function Data Connection allowing you to connect to your ECC.
You should review the SAP Integration Kit doc - it spells out authorizations required, how to handle security, etc. -
CR2008 Not enough memory while exporting reports from Crystal Reports 2008
I have recently upgraded our Crystal Reports version from Crystal Reports Basic for Visual Studio 2008 to Crystal Reports 2008. After upgradation I am facing the problem "Memory full.OtherErrorFailed to export the report. Not enough memory for operation" when I am trying to export the report from Crystal Reports 2008 Report viewer, or directly from the code behind. The application is hosted application. The problem occurs in our production environment.
Server details:
OS: Windows 2003 Enterprise Edition R2 with SP2
IIS: IIS 6
.Net Framework: 3.5
Application details:
Hosted application using Crystal Reports 2008 SP 3
Crystal Reports Viewer version: 12.0.2000.0
The data binding of the report object is done through an ADODB dataset.
Web.Config:
<configuration xmlns="http://schemas.microsoft.com/.NetConfiguration/v2.0">
<configSections>
<sectionGroup name="businessObjects">
<sectionGroup name="crystalReports">
<section name="printControl" type="System.Configuration.NameValueSectionHandler" />
<section name="crystalReportViewer" type="System.Configuration.NameValueSectionHandler" />
</sectionGroup>
</sectionGroup>
</configSections>
<businessObjects>
<crystalReports>
<printControl>
<add key="url" value="http://myserver/mysite/PrintControl.cab" />
</printControl>
<crystalReportViewer>
<add key="documentView" value="weblayout" />
</crystalReportViewer>
</crystalReports>
</businessObjects>
<appSettings>
<add key="CrystalImageCleaner-AutoStart" value="true" />
<add key="CrystalImageCleaner-Sleep" value="60000" />
<add key="CrystalImageCleaner-Age" value="120000" />
</appSettings>
<system.web>
<httpHandlers>
<add path="CrystalImageHandler.aspx" verb="GET" type="CrystalDecisions.Web.CrystalImageHandler, CrystalDecisions.Web, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
</httpHandlers>
<compilation debug="false">
<assemblies>
<add assembly="CrystalDecisions.Data.AdoDotNetInterop, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304" />
<add assembly="CrystalDecisions.Shared, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
<add assembly="CrystalDecisions.ReportAppServer.ClientDoc, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
<add assembly="CrystalDecisions.Web, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
<add assembly="CrystalDecisions.Enterprise.InfoStore, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
<add assembly="CrystalDecisions.Enterprise.Framework, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
<add assembly="CrystalDecisions.ReportSource, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
<add assembly="CrystalDecisions.CrystalReports.Engine, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
</assemblies>
</system.web>
<system.webServer>
<handlers>
<add name="CrystalImageHandler.aspx_GET" verb="GET" path="CrystalImageHandler.aspx" type="CrystalDecisions.Web.CrystalImageHandler, CrystalDecisions.Web, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" preCondition="integratedMode" />
</handlers>
</system.webServer>
</configuration>
Sample Code:
Report = new CrystalDecisions.CrystalReports.Engine.ReportDocument();
Report.Load(Server.MapPath(strReportPath));
Report.SetDataSource(dsReport);
Creportviewer.ReportSource = Report;
For exporting the report to PDF
string Filename = Path.Combine(Environment.GetFolderPath(Environment.SpecialFolder.InternetCache).ToString(), Guid.NewGuid().ToString() + ".pdf");
Report.ExportToDisk(ExportFormatType.PortableDocFormat, Filename);
Clean Up Code: (Page_UnLoad event)
if (Report != null)
Report.Close();
Report.Dispose();
Creportviewer.ReportSource = null;
Creportviewer.Dispose();
dsReport = null;
GC.Collect();
GC.WaitForPendingFinalizers();
Can someone help me resolve the issue.The .rpt file size is 14MB with the Data Save option enabled, 12MB without Data Save. Presumably the 12MB file size is because of the 24bit PNG we have as our background.
The Designer executes the report in less than a second and we can scroll through all pages and see the image fields perfectly.
When we Export to PDF, the Designer takes a long time, eventually gets to the 77%, the 7th record and returns "Export report failed" followed by "Memory full". If we export only page 1 of the 3 pages, it also returns a Memory full error. However, when the same report is run with only 1 page, that page exports to PDF but with a ridiculously large size and export time.
The machine has 2GB of physical memory with an 8GB pagefile with Windows 2003 (latest everything). The process runs up to about 1GB before reporting the memory full error.
We've also tried a variety of other suggestions posted in the other thread with no success.
We're happy to provide the RPT file to the Report Team to diagnose the problem. Ultimately, we need to be able to produce a 15 page report with approximately 45 images.
Our preferred scenario is fixing problem 2. The CR Designer seems quite capable of rendering our report and printing it to our third party PDF printer in a timely manner with small size. However, the API reports memory full.
The API resides in a dedicated reporting web service with NO other code except for loading the report, setting parameters and printing. When executing, it uses up to about 1.1GB before reporting the error.
Are there any other suggestions for fixing what we have? Are there known problems with large images in reports? Do we need to lodge a formal support request?
Regards, Grant.
PS. Grr and my message formatting is lost when I edited this message!!!
There is a 1500 character limit and then all formatting is removed to save space. Break you posts into separate entries.
Edited by: grantph on Sep 30, 2009 2:49 AM -
Creating Crystal Reports with Crystal Report Server XI
Hello,
I am new to Crystal Reports, i installed Crystal Reports Server XI R2 on Windows 2003 server with SP2 and was able to launch Inforview application and also Central Management Console Log On.
I can also see some sample reports which are installed during installation.
Now my next task is to create Crystal Reports using Crystal Report Server XI R2. How can we create a crystal report now by only using Crystal Report Server XI R2?
Do we have to install some other application to create Crystal Reports? I donot see any link on my server which i can use to create crystal reports. The only links which i can see are :
Business Objects-->
Crystal Report Server-->
.Net Administration LaunchPad
.Net Infoview
Business View Manager
Central Configuration Manager
Data Source Migration Wizard
Data Source Migration Wizard Help
Import Wizard
Online Developer Library
Publishing Wizard
Registration Wizard
Release Notes
Repository Migration Wizard
Please help
Thanks
VipinTwo ways to create reports:
1) You install the Crystal reports Designer (CRW32.exe).
With your Crystal Report Server, you should also have received a second CD that would have the CR designer.
2) You use the RAS SDK and create reports on the fly using the RAS report creation APIs - .NET or Java. Since you are in the .NET developer forum, I assume you might be interested in the .NET RAS SDK. Here is a list of resources i would recommend:
Links to samples are [here|https://www.sdn.sap.com/irj/scn/wiki?path=/display/bobj/netBusinessObjectsEnterpriseSDKSamples]
[How to use the RAS SDK .NET with In-process RAS Server|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10b840c0-623f-2b10-03b5-9d1913866b32]
[Programing RAS|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b050afe0-2fa5-2b10-658d-98f214ba6a4a]
[Choose the Right SDK for the Right Task|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f006a5e6-7e64-2b10-8a84-8b15ca5cacfc]
For more help, search these forums (there are some great posts in here), the [notes database|https://www.sdn.sap.com/irj/scn/advancedsearch?cat=sdn_ossnotes&query=&adv=true]
[articles|https://www.sdn.sap.com/irj/sdn/businessobjects-articles] and [downloads|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/bobj_download/main.htm]
Ludek -
Convertion from Bex Reports to Crystal reports
Hi all
we are integrating BI with BO, i have a task to convert all existing BEx reports into Crystal Reports. I knew nothing how to do this, can any one please explain in detail steps how to convert BEx reports into crystal reports.
For example any documents or t-codes how to start and finish the task.
ThanksPost your question BEX and/or B1 and classic SAP data source issues to the Integration Kit forum
-
I'm beginner , I'm going to code about calling Report by Crystal Report (not print layout) . I create one button in one page(such as purchase order). If i put this button i would like to show data this page by Crystal Report but I don't know how i begin code about it ?
I would like example calling crystal report (source code) that "how do you do?"
Thanks for all answer
Wibet ChoeisutanonHi Wibet,
There're numerous ways to call crystal reports. Basically, I call with datasource.
My example comes below.
dim crxReport as CrystalDecisions.CrystalReports.Engine.ReportDocument
crxReport.load(ReportFileName)
crxReport.setDataSource(RptRs)
crxReport.PrintToPrinter(1, False, 0, 0)
ReportFileName is physical path and file name of the report (.rpt) file.
And RptRS is recortset of datasource. I basically use TTX predefiled source.
Hope this can help you.
Hyunil Choi. -
How to convert PLD Report into Crystal Report
Hello Experts,
I want to convert my PLD Report into Crystal Report, but i am not able to find the solution ,
so how can i do this and what are the steps have to taken.
Kindly give me the solution .
Regards
RahulHi Rahul........
SAP has given a tool where you can convert your PLDs into Crystal Reports.......
Please check the below link to download tool......
http://www.sdn.sap.com/irj/scn/downloads?rid=/library/uuid/108305a7-1555-2d10-8289-9a178d441c71
Regards,
Rahul -
See sql query from crystal report without crystal report
see sql query from crystal report without crystal report
Hi,
Depends on datasource type but you could have a look at ODBC trace or if you have access to the SQL Server you could use profiler to monitor the session.
Regards,
Craig
And this will only be of use if you know which Server/Insstance/Database the Report is connecting to...
Please click "Mark As Answer" if my post helped. Tony C. -
Report in Crystal reports has different values in Infoview
I have uploaded a Crystal Report into BO Enterprise using the CMC.
The logging into the Infoview to view the report and the results are different to those in the report when run against the same data in Crystal reports.
It is pulling up data, but not the correct figures. I dont know where it is getting its data from.
Any help would be appreciated.I deleted the ODBC connection and recreated it with a new name.
I then relinked the report in crystal reports, and it suddenly decided to give updated values.
Thanks -
Font style issue with exporting report in Crystal Reports 2008
Hi,
I got stuck on the below issue for a while. Please can anyone help on this?
When I designed and executed a report in Crystal Reports 2008 on my local PC, the font style and size used in charts were exactly what I was expecting.
However, after I exported the report to our BusinessObjects CMC and displayed it in InfoView, the font style and size in charts looked quite different from what they were in CrystalReports.
Any ideas of how to fix this issue?
Thanks!
BAIHi Nanda Kishore,
This is because you do not have proper rights on Business View Manager. Whenever you create a dynamic parameter in crystal and try to save the report on BO, it creates a Business view automatically. Now in your case, it is unable to create a business view due to insufficient rights.
Go in Business View Manager u2013 Repository exploreru2014You will find Dynamic Cascading Prompts folderu2014Right click on that and go in rights and add your user information and give full rights.
Also make sure that your BO and CR designer on same version and patch level.
Thanks,
Sastry -
Report containing 15 sub reports crashing - Crystal Reports 2008
I am using Crystal report 2008 with all latest service packs applied. I have more then 20 different reports wich work absolutely fine and never crash. One of my report contains 15 sub reports since its bringing data from 15 different queries. This consistently keeps crashing everytime I try to run it. Not sure what could be the root cause.
We are using Postgres database and connected to it with ODBC connection using Microsoft DSN.
- All Subreport data is being displayed on Report Footer
- All subreports are included in the Main report page header section. (I have also tried doing it on report footer section but it still crashes)
I have tried searching through the forum and did not find similar issue resolutions. Did someone face similar problems before?
The crash message is:
"crw32.exe has encountered a problem and needs to close. We are sorry of the inconvenience."
Error report contains this data:
AppName: crw32.exe AppVer: 12.2.0.290 ModName: psqlodbc35w.dll
ModVer: 9.0.2.0 Offset: 0004c538
I am using Windows XP
Crystal Report Version Details:
CR Developer Version 12.2.0.290
Product Type: Full
Let me know how can I debug this issue? Any help is appreciated.@Don - We performed extensive testing for this crash issue and found that now this crash is not happening only in one scenario. So we have partially fixed this.
Now the report crashes if I get disconnected from database and reconnect. This is what happens
1. open the report in crystal report 2008
2. try to run the report when db is connected- it works fine.
3. Now disconnect the database (we are using ssh tunnel to connect to db so we just close the tunnel)
4. now try to refresh the report - it fails to retrieve data.
5. Now close the report without saving it.
6. Now Close Crystal Report.
7. Now Connect the DB using ssh tunnel so crystal report can connect.
8. Now open Crystal Report
9. Launch the target report.
10 Preview the report - it works for first time.
11. Now do a refresh keeping same parameters - Report crashes here.
- I tried these steps with some of my other reports and they do not crash.
- Now I have only one report which contains a Postgres Query with date range,order by and a union join.
- No subreports now - I am trying to run this one subreport as a standalone report which I created from scratch(using blank report wizard) and just copied the query.
Any more pointers would help. -
Post Author: Manjula
CA Forum: JAVA
Hi,
Trying to schedule a report using Crystal Reports Server Java SDK. Want to pass DBConnections from API, though passing DBConnections, the report is not being scheduled and says "Failed to retrieve data from the database.Details:[Database Vendor Code:6550].
Would be thankful if someone could answer my point as applicable.
Here is the code attached.
ISDKList dbLogons = oReport.getReportLogons();int dbLogonSize = dbLogons.size();
for(int i=0; i<dbLogonSize; ++i) {
IReportLogon dbLogon = (IReportLogon)dbLogons.get(i);
dbLogon.setDatabaseName("DBname");
dbLogon.setUserName("usrname");
dbLogon.setPassword("pwd");
Thanks in advance.Post Author: Manjula
CA Forum: JAVA
Ted,
Thank you for your valuable information.
First, tried scheduling on Central Management Console and then with the java code.It worked fine, but here is another question for you.
On the Console, a report exists with ServerName and UserName harcoded and when trying to set ServerName and UserName from the java code, its throwing exception. Where as Password is not set on Console, am able to set password from java.
And DatabaseName is not set on Console (non editable), unable to set the same from java too. Why is it so?
So, my question is - though ServerName,DatabaseName,UserName,Password exists on the Console report, can't I override those parameters from java?
Would be greatful if you answer my question and provide me some guidance.
Thanks in advance. -
How to make crosstab report in crystal report
Hi all ,
I want to make a crosstab report in crystal report
my query is like this
select YearDate.year ,
(currentasset.currentaset / currentliability.currentliability ) as CurrentRatio
,(currentasset.currentaset - Inventory.Inventoryaset / currentliability.currentliability ) as QuickRatio
from
select distinct YEAR(JDT1.RefDate) as year from JDT1
)YearDate left join
select YEAR(JDT1.RefDate) as year,sum(JDT1.Debit - JDT1.Credit ) as currentaset from JDT1,OACT
where JDT1.Account = OACT.AcctCode
and OACT.AcctCode = '11'
group by YEAR(JDT1.RefDate)
)currentasset on YearDate.year = currentasset.year left join
select YEAR(JDT1.RefDate) as year,sum(JDT1.Debit - JDT1.Credit ) as Inventoryaset from JDT1,OACT
where JDT1.Account = OACT.AcctCode
and OACT.AcctCode = '11.05'
group by YEAR(JDT1.RefDate)
)Inventory on YearDate.year = Inventory.year left join
select YEAR(JDT1.RefDate) as year,sum(JDT1.Debit - JDT1.Credit ) as currentliability from JDT1,OACT
where JDT1.Account = OACT.AcctCode
and OACT.AcctCode = '21'
group by YEAR(JDT1.RefDate)
)currentliability on YearDate.year = currentliability.year left join
order by YearDate.year
So if i view the data in sql server it should be like this
Year CurrentRatio quickRatio
2006 501 100
2007 600 200
2008 700 300
2009 900 400
I want to make a crosstab with the column is year . the Year is dynamic according to the selection
So if i select the year from 2007 to 2009
It should be like this in report
2007 2008 2009
CurrentRatio 600 700 900
QuickRatio 200 300 400
How can i make it in Crystal report ?
I have use the template in crosstab crystal report, but there is not suitable.
Can i make manually. ?
Thanks in advance
Regards
KKHi kevin,
thanks for your respond . Actually, it's work.
But i have some issue again.
How can i make a grouping
So the grouping per Item
For example
2006 2007 2008
Group 1 Item A 5 6 7
Item B 7 8 9
Group 2 Item C 9 0 0
Item D 8 8 9
And another question, Is there always have row summary ? It seems that after the 2008 column, there is a total column, Can I remove this ?
Thanks in advance
regards
KK
Edited by: kah kian on Jun 2, 2011 4:17 PM -
Problem deploying OLAP report to Crystal Reports Server
I have developed a simple OLAP cube report using Crystal Reports Developer (11.0.0.1.1282). The report correctly previews and shows values against the cube that I have chosen as the datasource. The datasource is not my local computer but another computer (on the same network) that contains an Analysis Services 2005 cube. Crystal Reports Server (11.5) is installed on the same computer that contains the datasource.
Using the CMS I uploaded the OLAP cube report to the server. After that was finished I changed the "When viewing report" radio button to "Use same database loging as when report run" in the Process/Database setcion. I logged into the InfoViewer and navigated to the report and executed it. When the report executes I get the following error:
Crystal Reports: Print Engine Error
Unable to retrieve Object.
Crystal Reports: Print Engine Error
I wanted to make sure that the server was running correcly as it is a fresh install. So I created a standard report that connects to a SQL Server 2005 datasource and displays the contents of a table. When I uploaded this report to the Crystal Report Server it rendered correctly.
What do I need to do to make the OLAP cube report render correctly?I'm not sure about using OLAP with CR on the server, maybe someone else will have more input on that.
When using OLAP on the server I recall that you must install PTS (it was like OLAP - ODBC) but it didn't require any config just to be installed on the server.
You mentioned CR 11.0 what version is the server? I don't believe SQL 2005 analysis services was ever tested with XIR1 (version 11). You can check the supported platforms by clicking the business obejcts link above and selecting articles, then your version.
Do you have olap intelligence? That was a seperate product on version 11 that was used to create .car reports off of OLAP.
Regards,
Tim
Maybe you are looking for
-
How to send a java array to a pl/sql procedure
Hi, This is similar to a post about 6 months ago on retrieving pl/sql tables from a java application but I can't seem to figure out how to use what I learned there to solve this. In a java application I have a Long[] array, and in the database I have
-
The program doest enterpret my figures from the text file in the correct way since the numbers contain dots instead of commas. Is there a way to fix this in labVIEW, or do I have to change the files before reading them in the program? Thanks beforehe
-
well i was listening to music on my iphone and then it just stopped and now it won't come back on. i tried resetting it alot and nothing i mean nothing comes on! i tried recharging too and nothing and tried connecting it to itunes and nothing! Help
-
IBook 1099 Tax Form to Publishers
Does Apple send out 1099 tax forms to publishers? I have not received one. (But I have from Amazon and Barnes & Noble) I went through iTunes Connect "Contact Us" without a specific answer to my question, so I thought I would ask on here. If you are a
-
My java applet does not display on WinXP desktop on setting it as active desktop component. I have set the .html file containing the applet as active component. Otherwise the browser shows the applet fine. please somebody help me.