SAP Backup service

Hello friends,
its been now more than a week that my SAP backup is not doing automatic backup on the server. i have checked all the settings and nothing is wrong. this happened after i have upgraded to 8.8 version from 2007. when i check the service in windows services, it shows that the service is starting... but it stays under this status forever, i cannot stop it or restart.
did anyone had such a problem before? please help.

Hi,
If the service is starting, it means not started. You have to clean reinstall the service tool.
You may use SQL Server backup function directly. That is another option.
Thank,
Gordon

Similar Messages

SAP Backup Service SAP 8.8 and Windows 2008 R2 64 Bit

Dear All ( Mr Gordon)
I am facing problem with the Backup Service on windows 2008 R2 64 Bit.
1)The Service starts - There is no Issue
2)THere is no Backup - Even though i schedule it perform the backup
3)EvenLog has a lot of messages - Messages says some Dll are Missing or Corrupt.
COmpletely Uninstalled the Server Tools and Reinstalled back ,still there is error.
PLease help !
Best Regards
Dayal

Dear Dayal,
Thank you for your trust on me. To be honest, I never use SAP Backup Service. This is because: SQL Server provides its own Backup Service. No other vendor can compete with its build in function.
Thanks,
Gordon

Unable to Start/Stop SBO Mailer and SBO Backup services

Hi All,
With reference to the thread of the following Link : SBO Backup and Messenging Service - Starting , We have a customer on SAP B1 8.8 PL 16 and we faced the same issue wherein after restarting the server, SBO Mailer and SBO Backup services show status as starting and all buttons are greyed out.
As per the thread we did re-install the server tools and it worked fine. But when we restart the server again the same issue arises.
Kindly reply back at the earliest...
Thanks and Regards,
Pritesh Shah

Dear Pritesh Shah,
please try the following:
Exit the Service Manager.
On the Server got to Start- > and locate the Icon of the Service Manager -> click right and "Use as Administrator.
After this open the Service Manager and take a look if you could activate the SBO Mailer and SBO Backup.
I hope this helps.
Best regards,
Indira

SAP- Windows services.

I have a console application written in Dot Net which gets data from SAP and does some processing. It was felt we convert the console application to a service to reduce the complexity in procedure. Therefore i'd like to know how to specify the RFC destination parameters in the Service written in C#.Net. In which event of the service to i read the windows service. Good you give me an idea about the events in the Service such as onStart,onStop,onContinue.
Thank you.

> We had shutdown the SAP, Oracle and their services for full offline
> backup. Today we tried to start SAP but the SAP Windows
> service SCS01 (SAPGD1_01) not getting started and the JC00 (SAPGD1_00)
> is not showing in the services list.
Anything in the event log before the shutdown/restart of the machine?
Markus

SAP cron service getting restarted

Hi,
The SAP Cron service is getting restarted every 8 hours throwing following
error in Event log viewer:
The service was stopped.
Try to use 'c:/etc/kwtadm/crontab' as crontab
Try to use 'c:/etc/sdbadm/crontab' as crontab
The service was started (Version 1.6).
Due to this backup agensts are not running and backup is not done automatically.
Please suggest how to resolve this.
Regards,
Sushma

> It is just like SAP<SID>_<instance number> windows service.We can find it in services.msc.
I have never seen that before. What application uses that?
Markus

Error in consuming a (simple) SAP web service

Hello,
I am trying to write a simple web service client for this web service:
WSDL: http://xi.esworkplace.sap.com:50200/ClassificationService/CS?wsdl
Endpoint: http://xi.esworkplace.sap.com:50200/ClassificationService/CS?style=document
When calling the operation getAllClassificationSystems(1, 1, 1, 1) I get the following error:
An error occurred invoking the specified method.
; nested exception is:
     org.xml.sax.SAXException: Invalid element in api_v1.classification.sap.com.ClassificationSystemList - actualCount
I tested the web service with JCows Generic Web Service Client (http://www.jcows.org/?page=4⟨=de). I also get a similar error when using the Web Service Client Wizard of WebSphere Integration Developer.
As I can see with TCPmonitor, from the endpoint I receive a meaningful SOAP response like this one:
SOAP response:
<SOAP-ENV:Envelope xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<SOAP-ENV:Header>
<wsse:Security xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity- secext-1.0.xsd">
<wsu:Timestamp xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-u tility-1.0.xsd">
<wsu:Created>2007-05-16T13:10:10Z</wsu:Created>
<wsu:Expires>2007-05-16T13:10:40Z</wsu:Expires>
</wsu:Timestamp>
</wsse:Security>
</SOAP-ENV:Header>
<SOAP-ENV:Body>
<ns1:ClassificationSystemList version="10736" xmlns:rn0="http://schemas.xmlsoap.org/soap/encoding/" xmlns:rn1="java:sap/standard" xmlns:rn2="urn:uddi-org:vscache_v3" xmlns:rn3="urn:java/lang" xmlns:rn5="urn:uddi-org:api_v3" xmlns:rn4="urn:com.sap.classification.transport" xmlns:ns1="urn:com.sap.classification:api_v1">
<ns1:listDesc>
<ns1:actualCount>9</ns1:actualCount>
<ns1:includedCount>1</ns1:includedCount>
<ns1:listHead>1</ns1:listHead>
</ns1:listDesc>
<ns1:ClassificationSystem valuesVersion="12">
<ns1:id>uddi:uddi.sap.com:categorization:business-object</ns1:id>
<ns1:name>Business object</ns1:name>
<ns1:description>The SAP business object UDDI category system and SR classification system. Business objects are part of the Enterprise Service Architecture meta-model.</ns1:description>
<ns1:type>FLAT</ns1:type>
<ns1:isPredifined>true</ns1:isPredifined>
<ns1:readOnly>false</ns1:readOnly>
<ns1:onlyOnce>false</ns1:onlyOnce>
<ns1:mustHaveDesc>false</ns1:mustHaveDesc>
<ns1:normalizeCodes>false</ns1:normalizeCodes>
<ns1:mTimeCustModService>true</ns1:mTimeCustModService>
<ns1:mTimeSapModService>true</ns1:mTimeSapModService>
<ns1:ideCusModService>true</ns1:ideCusModService>
<ns1:ideCustPrgService>true</ns1:ideCustPrgService>
<ns1:ideSapModService>true</ns1:ideSapModService>
<ns1:ideSapPrgService>true</ns1:ideSapPrgService>
</ns1:ClassificationSystem>
</ns1:ClassificationSystemList>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
This is how the submitted SOAP request looks like:
SOAP request:
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<soapenv:Body>
<getAllClassificationSystems xmlns="urn:com.sap.classification:api_v1">
<listHead xsi:type="xsd:int">1</listHead>
<maxRows xsi:type="xsd:int">1</maxRows>
<version xsi:type="xsd:long">1</version>
<sortType xsi:type="xsd:int">1</sortType>
</getAllClassificationSystems>
</soapenv:Body>
</soapenv:Envelope>
But the problem is meet when the client tries to deserialize the received SOAP response. The error message in WID looks like this:
Error message:
WebServicesFault
faultCode: hxxp://schemas.xmlsoap.org/soap/envelope/ Server.generalException
faultString: org.xml.sax.SAXException: WSWS3047E: Error: Cannot deserialize element actualCount of bean classification.api_v1.sap.com.ClassificationSystemList_Type.
Child element actualCount does not belong in namespace urn:com.sap.classification:api_v1.
Most likely, a third-party web services platform has sent an incorrect SOAP message.
faultActor: null
faultDetail:
org.xml.sax.SAXException: WSWS3047E: Error: Cannot deserialize element actualCount of bean classification.api_v1.sap.com.ClassificationSystemList_Type.
Child element actualCount does not belong in namespace urn:com.sap.classification:api_v1.
Most likely, a third-party web services platform has sent an incorrect SOAP message.
     at com.ibm.ws.webservices.engine.WebServicesFault.makeFault(WebServicesFault.java: 203)
     at com.ibm.ws.webservices.engine.SOAPPart._getSOAPEnvelope(SOAPPart.java:1055)
     at com.ibm.ws.webservices.engine.SOAPPart.getAsSOAPEnvelope(SOAPPart.java:605)
     at com.ibm.ws.webservices.engine.Message.getSOAPEnvelope(Message.java:461)
     at com.ibm.ws.webservices.engine.handlers.jaxrpc.JAXRPCSOAPHandler.checkSOAPSemant ics(JAXRPCSOAPHandler.java:298)
     at com.ibm.ws.webservices.engine.handlers.jaxrpc.JAXRPCSOAPHandler.access$000(JAXR PCSOAPHandler.java:75)
     at com.ibm.ws.webservices.engine.handlers.jaxrpc.JAXRPCSOAPHandler$2.invoke(JAXRPC SOAPHandler.java:173)
     at com.ibm.ws.webservices.engine.PivotHandlerWrapper.invoke(PivotHandlerWrapper.ja va:329)
     at com.ibm.ws.webservices.engine.WebServicesEngine.invoke(WebServicesEngine.java:2 83)
     at com.ibm.ws.webservices.engine.client.Connection.invokeEngine(Connection.java:79 8)
     at com.ibm.ws.webservices.engine.client.Connection.invoke(Connection.java:693)
     at com.ibm.ws.webservices.engine.client.Connection.invoke(Connection.java:644)
     at com.ibm.ws.webservices.engine.client.Connection.invoke(Connection.java:472)
     at com.ibm.ws.webservices.engine.client.Stub$Invoke.invoke(Stub.java:818)
     at ClassificationServiceWsd.CSBindingStub.getAllClassificationSystems(CSBindingStu b.java:127)
     at ClassificationServiceWsd.ClassificationServiceViProxy.getAllClassificationSyste ms(ClassificationServiceViProxy.java:64)
     at temp.CsReader3.main(CsReader3.java:42)
Caused by: org.xml.sax.SAXException: WSWS3047E: Error: Cannot deserialize element actualCount of bean classification.api_v1.sap.com.ClassificationSystemList_Type.
Child element actualCount does not belong in namespace urn:com.sap.classification:api_v1.
Most likely, a third-party web services platform has sent an incorrect SOAP message.
     at com.ibm.ws.webservices.engine.encoding.ser.BeanDeserializer.onStartChild(BeanDe serializer.java:359)
     at com.ibm.ws.webservices.engine.events.DEventProcessor.onSimpleChild(DEventProces sor.java:240)
     at com.ibm.ws.webservices.engine.encoding.ser.BeanDeserializer.onSimpleChild(BeanD eserializer.java:576)
     at com.ibm.ws.webservices.engine.events.P2DConverter.flush(P2DConverter.java:767)< br>     at com.ibm.ws.webservices.engine.events.P2DConverter.endElement(P2DConverter.java: 410)
     at sax.SAX2DocumentEntityParserBase.endElementAction(Unknown Source)
     at util.DocumentEntityParserBase.endElementEvent(Unknown Source)
     at com.ibm.xml.b2b.scan.latin.LatinWFCDocumentScanner.scanEndElement(Unknown Source)
     at com.ibm.xml.b2b.scan.latin.LatinWFCDocumentScanner.scanContent(Unknown Source)
     at com.ibm.xml.b2b.scan.latin.LatinWFCDocumentScanner.scanDocument(Unknown Source)
     at sax.latin.LatinWFCSAX2DocumentEntityParser.scanDocument(Unknown Source)
     at util.DocumentEntityParserBase.parse(Unknown Source)
     at sax.SAX2DocumentEntityParserBase.parseEntity(Unknown Source)
     at sax.SAX2DocumentEntityParserBase.parse(Unknown Source)
     at javax.xml.parsers.SAXParser.parse(Unknown Source)
     at com.ibm.ws.webservices.engine.utils.WebServicesParser.parse(WebServicesParser.j ava:274)
     at com.ibm.ws.webservices.engine.encoding.DeserializationContextImpl.parse(Deseria lizationContextImpl.java:268)
     at com.ibm.ws.webservices.engine.SOAPPart._getSOAPEnvelope(SOAPPart.java:1029)
     ... 15 more
Are the generated proxies for the web service client erronous, and thus a problem with Axis WSDL2Java tooling exists?
Or is there a mismatch between WSDL and SOAP response concerning encoding style or namespaces, or other...
Thanks for some hints!

I should have included a possible work-around: modify
the WSDL to match with the wire format if you don't
have access to the remote service.
<xs:element name="ClassificationSystemList">
<xs:complexType>
<xs:sequence>
<xs:element name="listDesc"
type="tns:ListDescription"
nillable="true"
minOccurs="0"/>
<xs:element name="ClassificationSystem"
maxOccurs="unbounded"
minOccurs="0"
type="tns:ClassificationSystem"
nillable="true"/>
<xs:attribute name="version" type="xs:long"
use="required"/>
<xs:sequence>
<xs:element name="Response"
type="tns:ClassificationSystemList"
nillable="true"/>
>
-->
</xs:complexType>
xs:element>
...Hope it helps,
-Ericerajkovi,
thanks for your suggestion. Since I have no access to the remote service I have modified the WSDL file, as you suggested.
But now I am encountering another error when invoking the operation:
WebServicesFault
faultCode: {http://schemas.xmlsoap.org/soap/envelope/}Client
faultString: No operation found using soap keys [], [getAllClassificationSystems]. InterfaceMapping Object class: com.sap.engine.services.webservices.espbase.mappings.InterfaceMapping mappings: {BindingType=Soap, InterfaceMappingID=sap.com/tc~classificationService_ClassificationService_CSPort}.
faultActor: null
faultDetail:
     com.sap.engine.services.webservices.espbase.server.additions.exceptions.ProcessException: No operation found using soap keys [], [getAllClassificationSystems]. InterfaceMapping Object class: com.sap.engine.services.webservices.espbase.mappings.InterfaceMapping mappings: {BindingType=Soap, InterfaceMappingID=sap.com/tc~classificationService_ClassificationService_CSPort}.
No operation found using soap keys [], [getAllClassificationSystems]. InterfaceMapping Object class: com.sap.engine.services.webservices.espbase.mappings.InterfaceMapping mappings: {BindingType=Soap, InterfaceMappingID=sap.com/tc~classificationService_ClassificationService_CSPort}.
     at com.ibm.ws.webservices.engine.WebServicesFault.makeUserFault(WebServicesFault.java:218)
     at com.ibm.ws.webservices.engine.xmlsoap.builders.WebServicesFaultProcessor.createFault(WebServicesFaultProcessor.java:411)
     at com.ibm.ws.webservices.engine.xmlsoap.SOAPFault.getFault(SOAPFault.java:486)
...I noticed that the generated SOAP request now has also changed. The getAllClassificationSystems element is now wrapped with an additional getAllClassificationSystems element. So the web service endpoint is not able to understand the message.
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
   <soapenv:Header/>
   <soapenv:Body>
      <getAllClassificationSystems>
         <p970:getAllClassificationSystems xmlns:p970="urn:com.sap.classification:api_v1">
            <p970:listHead>1</p970:listHead>
            <p970:maxRows>10</p970:maxRows>
            <p970:version>1</p970:version>
            <p970:sortType>1</p970:sortType>
         </p970:getAllClassificationSystems>
      </getAllClassificationSystems>
   </soapenv:Body></soapenv:Envelope>The generated proxies by WSDL2Java are now different. Previously I invoked the operation in this way:
proxy.getAllClassificationSystems(new Integer(1), new Integer(1), new Long(1), new Integer(1));Now I must invoke it so:
GetAllClassificationSystems gas = new GetAllClassificationSystems();
        gas.setListHead(new Integer(1));
        gas.setMaxRows(new Integer(10));
        gas.setSortType(new Integer(1));
        gas.setVersion(new Long(1));
        proxy.getAllClassificationSystems(gas);Is there a possbility to configure Axis WSDL2Java in order to create the previous SOAP message or is another change to the WSDL required?

Unable to login to IB - again com.sap.engine.services.rmi_p4.P4IOException

We have installed a new PI 7.1 system and at he moment I have the problem that I can't login into the IB tools. I found a lot of threads with this problem but I can't find a solution for my specific problem. Have a look at the well known error log:
com.sap.aii.utilxi.misc.api.ReconnectRuntimeException: Cannot connect to server using message server: ms://MYHOST:8100/P4
     at com.sap.aii.ib.clsif.login.EJBHomeFactory.getInitialContext(EJBHomeFactory.java:668)
     at com.sap.aii.ib.clsif.login.EJBHomeFactory.connect(EJBHomeFactory.java:461)
     at com.sap.aii.ib.clsif.login.EJBHomeFactory.initRemoteFactory(EJBHomeFactory.java:133)
     at com.sap.aii.ib.clsif.login.LoginServiceImpl.login(LoginServiceImpl.java:176)
     at com.sap.aii.ib.clsif.login.LoginServiceImpl.login(LoginServiceImpl.java:121)
     at com.sap.aii.ib.clsif.login.LoginServiceImpl.login(LoginServiceImpl.java:109)
     at com.sap.aii.ib.gui.login.SplashLoginFrame$LoginController.doTrial(SplashLoginFrame.java:960)
     at com.sap.aii.ib.gui.login.SplashLoginFrame$LoginAction$1.run(SplashLoginFrame.java:832)
     at java.awt.event.InvocationEvent.dispatch(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at com.sap.aii.utilxi.swing.toolkit.Guitilities$EventProcessor.dispatchEvent(Guitilities.java:319)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)
Caused by: com.sap.engine.services.jndi.persistent.exceptions.NamingException: Exception while trying to get InitialContext.
     at com.sap.engine.services.jndi.InitialContextFactoryImpl.getInitialContext(InitialContextFactoryImpl.java:488)
     at javax.naming.spi.NamingManager.getInitialContext(Unknown Source)
     at javax.naming.InitialContext.getDefaultInitCtx(Unknown Source)
     at javax.naming.InitialContext.init(Unknown Source)
     at javax.naming.InitialContext.<init>(Unknown Source)
     at com.sap.aii.ib.clsif.login.EJBHomeFactory.getInitialContext(EJBHomeFactory.java:653)
     ... 15 more
Caused by: com.sap.engine.interfaces.cross.EXTstinationException: cannot establish connection with any of the available instances:
MYHOST.DOMAIN.EXT:50104 Reason: com.sap.engine.services.rmi_p4.P4IOException: Cannot open connection to host: 172.24.205.193 and port: 50104
     at com.sap.engine.interfaces.cross.EXTstination.getNextAvailableBroker(Destination.java:59)
     at com.sap.engine.interfaces.cross.EXTstination.getRemoteBroker(Destination.java:35)
     at com.sap.engine.services.jndi.InitialContextFactoryImpl.getInitialContext(InitialContextFactoryImpl.java:352)
     ... 20 more
As you can see I call the IB via a pure hostname "MYHOST". But in the last step you can see the the FQDN "MYHOST.DOMAIN.EXT"was used. That brings me into trouble because these are different IP's. I can't reach the MYHOST.DOMAIN.EXT IP and that's why I can't login into the IB.
If I add an entry in my local host file for MYHOST.DOMAIN.EXT with the IP address I can reach all works fine but this solution is unacceptable.
The key question is why the IB uses this FQDN. I can't find any setting where this FQDN is used. I have checked the complete exchange profile, the sld and and and u2026. I always find only the pure hostname MYHOST.
Additionally I have to say that we have already a PI 7.1 system (DEV) whre I can use all tools. But this is a migrated system (from 3.0). I have only problems with that new installed empty system.

Thanks Barry. I've checked all connections. They all use the short name and all work.
Thanks Joel, but I think you get me wrong. That's why I will explain it a little bit better.
I can use the IB if I manipulate my own hosts file but this is in my eyes not the right way. As I have written I can use my PI dev system without that kind of manipulation.
My new PI system is at our computer centre. The PI machine has two network interface and I can use only one of these two. As you can see at the error log the full name points to 172.24.205.193 but I only can reach the 172.20.02.193 address. For this second IP we have an entry at our DNS server. The other one (FQDN) comes from the computer center DNS server. Of course I can overwrite it with an entry in my local hosts file but I think that isn't a good solution.
The key question is: Why the full qualified domain name "MYHOST.DOMAIN.EXT" is used instead of the short name.
I call the IB via the web page
http://MYHOST:50100/dir/start/index.jsp
And as you can se at the log the first call goes to this address. But then a second call goes to MYHOST.DOMAIN.EXT:50104. And I can find any setting (exchange profile and so on) where this full qualified domain name is specified.

Com.sap.engine.services.dbpool.exceptions.BaseResourceException:

Hi
Jcontrol.exe is stopped. I checked in server0 log file.
Caused by: com.sap.engine.services.dbpool.exceptions.BaseResourceException: SQLException thrown by the physical connection:
Caused by: com.ibm.db2.jcc.b.DisconnectException: [ibm][db2][jcc][t4][2043][11550] Exception java.net.ConnectException: Error opening socket to server
Caused by: java.net.ConnectException: Connection refused: connectCommunication API being used: SOCKETS. Location where the error was detected: T4Agent.sendRequest().
Communication function detecting the error: OutputStream.flush(). Protocol specific error codes Software caused connection abort: socket write error, *, 0. Message: Software caused connection abort: socket write error
com.sap.caf.eu.gp.mail.cf.core.exceptionhandling.MailCFExceptionHandler.throwMailCFRuntimeException(MailCFExceptionHandler.java:92)
#1.5 #0022198E9491001F000000130000390C00046999A2B0692D#1242008487314#com.sap.jms##com.sap.jms####n/a##6e72d7203dd211decd7d0022198e9491#SAPEngine_System_Thread[impl:5]_90##0#0#Error#1#/System/Server#Plain#JMSServerContainer.onServiceJoin##Configuration problem occurred while accessing JMS configuration resources.#
#1.5 #0022198E9491008E000000010000390C00046999A5B43D17#1242008537907#com.sap.sql.jdbc.direct.DirectPreparedStatement##com.sap.sql.jdbc.direct.DirectPreparedStatement#Guest#0##n/a##8c9ab8303dd211de99680022198e9491#SAPEngine_Application_Thread[impl:3]_2##0#0#Error#1#/System/Database/sql/jdbc/direct#Java#com.sap.sql_0003##SQL error occurred on connection apsgdc01hwebd:BPE:SAPBPEDB: code=-4,499, state="null", message="[ibm][db2][jcc][t4][2030][11211] A communication error has been detected. Communication protocol being used: TCP/IP.
Communication API being used: SOCKETS. Location where the error was detected: T4Agent.sendRequest().
Communication function detecting the error: OutputStream.flush(). Protocol specific error codes Software caused connection abort: socket write error, *, 0. Message: Software caused connection abort: socket write error";
SQL statement is "SELECT "RESEND_INFO_UUID","SENT_MAIL_UUID","RI_START_TIME","RI_DELAY" FROM "CAF_GP_RESEND_INFO" ORDER BY 4".
[EXCEPTION]
#6#-4499#<null>#[ibm][db2][jcc][t4][2030][11211] A communication error has been detected. Communication protocol being used: TCP/IP.
Communication API being used: SOCKETS. Location where the error was detected: T4Agent.sendRequest().
Communication function detecting the error: OutputStream.flush(). Protocol specific error codes Software caused connection abort: socket write error, *, 0. Message: Software caused connection abort: socket write error#apsgdc01hwebd:BPE:SAPBPEDB#SELECT "RESEND_INFO_UUID","SENT_MAIL_UUID","RI_START_TIME","RI_DELAY" FROM "CAF_GP_RESEND_INFO" ORDER BY 4#com.ibm.db2.jcc.b.DisconnectException: [ibm][db2][jcc][t4][2030][11211] A communication error has been detected. Communication protocol being used: TCP/IP.
Communication API being used: SOCKETS. Location where the error was detected: T4Agent.sendRequest().
Communication function detecting the error: OutputStream.flush(). Protocol specific error codes Software caused connection abort: socket write error, *, 0. Message: Software caused connection abort: socket write error
Regards
Rao

Hi, Please let me know if you managed to solve the problem.. We are facing the same issue
Regards
PN

Is iCloud really a backup service? Because I can only retrieve 60 out of my 600 photos.

Hi, my girlfriend was robbed of her iPhone and now we want to retrieve the pictures from iCloud to her new iPhone but it only retrieves 60 out of 600 from the Photo Stream. According to iCloud the latest backup was made 22nd of January.
Does it only retrieve from the last 30 days? (I read that somewhere)
If so: how can you call it a backup service?
And why is her 5 GB storage filled up if I only had 60 photos on there?
And why can't you just let the users browse among the backed up data. It is more likely that you look for single documents rather than your whole backup. Especially as you usually make backups on computers sometimes and fill your phone with new pictures and then there is no space to restore anymore.
It says - backup your photos - in your slogans and promotional texts. Perfect! - I thought.

If the songs play ok in iTunes make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Error occured while opening SAP Data services designer - license error

Hi When i open sap data services , error has been attached. I followed note-1826666 , but it didnt work. I was following note - 1812861 , but not able to understand where i can find directory WOW64 and what exactly to be copied as per first point. Not able to understand its 2nd point also that says - "Add it to the properties mask of the cluster node configuration under the registry section" Our BO DS has operating system windows server 2008 R2 enterprise. Kindly advice hw to proceed.

Go to the License Manager and Update your BODS license. When you are opening the BODS you will able to get the version.
Log on to the CMC then click on the Help and then about, you will get the total information.
Thanks and Regards
Joydip.

Invoking a SAP web service from Dreamweaver MX

I am trying to invoke a SAP web service from ColdFusion and it looks like ColdFusion does not even recognize the rfc generated wsdl file as a wsld file. I have tried other wsdl url's outside my company and they work...so I know that web services at least work in ColdFusion. Can anyone advise on this topic?
Thanks!

Paula,
I suppose you're using CFINVOKE (http://www.activsoftware.com/code_samples/code.cfm/CodeID/44/ColdFusion/Invoking_SOAP_Web_Services_with_ColdFusion_MX_CFINVOKE_Tag) or are you using a third party tool like CFX_SOAP (http://www.activsoftware.com/products/productdetail.cfm/id/1015)?
Are you working with WebAS 6.4 or 6.2?
It works with web services created with WebAS 6.4, but you should generate proxy classes. Check Thomas' weblog (second part of it)->https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1012. [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]
The WSDL generated by this method is more standard than the one generated when you just Remote enable an FM and look at the webservice browser.
Th core of CF MX is Java and that engine is rather strict in standards.
Eddy

How to remove user authentication for SAP Web Service?

Hi there,
I am using SAP Web Services in my flex application. Every time wsdl url is called, the username\password window pops up. I want to remove this.
I searched in the forum and based on the discussions, I tried giving the user name password under Web Service Administration using SOAMANAGER, by selecting No Authentication option. But this did not work. I still get that pop up.
I also tried giving the credentials in SICF, under Logon Data tab of the service. This too failed. I kept getting the pop up.
Can someone pls let me know how can I remove this? If username password in mandatory to be passed, I can create a temporary username which will be used to access all of my webservices and use it. But I want to remove this authentication part when I am using the flex application ang calling the web service url from within it.
Appreciate your help.....
-Deepak

Hi,
It is a little bit tricky, because the interface has changed several times in different releases. I know that it is possible without authentification.
I remember that i defined somewhere the default client, the username and password in the ERP system to use by this web service.
Maybe it helps if you try the old transactions WSADMIN, WSCONFIG or WSADMIN2 ?
Sorry that I cannot help you more. I hope it helps.
Best regards,
Joern

Calling SAP Web Service from BPEL

Hi
I am trying to call a SAP Web Service friom BPEL using the SAP WSDL.It requires a basic authentication (Username/Password) which i am providing as partnerlink properties in bpel.xml.
While testing the BPEL Process from the console, it is giving me an error
"<summary>exception on JaxRpc invoke: HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Bad response: 401 Unauthorized</summary>"
But when i am testing it from SOAP UI tool it is giving me the desired response.
Does anyone has any idea why it is failing from BPEL?Is there any configuration which i am missing?
Regards
Ayush

HI Ayush / Suryaveer..
I am stuck at the same situation, trying to invoke a secured SAP webservice. The invoke fails with a security previlege exception.
Am using the basicHeaders property to propagate the credentials to the SAP system.
Can you please suggest on the same.
credential propagation in bpel.xml :
<property name="basicHeaders">propagate</property>
<property name="basicUsername">ABC</property>
<property name="basicPassword">DEF</property>

Consuming a sap web service via jde 4.5.7 (ecc 6.0)

Hi all,
I have a question here, if u could help me, i have to call a sap webeservice via jde , but before i test a jde example by calling a public web service which is not a sap web service , i used to give url as:
connThread.get("http://www.webservicex.net/globalweather.asmx/GetCitiesByCountry?CountryName="Morocco;deviceside=true";
i was not obliged to set the apn parameters and it does work
here as it's mentioned , there is the access point, getcities ... the method name and the parameter name and the parameter value
"Morocco", but i m asking how did we precise the methods of an rfc sap, and the name parmeter and his value.
have u any idea to help me understand how we call sap rfc, method name, parmaeter name, cz i m a newbie to sap and bb.
but now when i try to call an rfc sap , i give the link
connThread.get("http://hca-ecc.hca.group:8000/sap/bc/srt/wsdl/sdef_Z_WS/wsdl11/ws_policy/document?sap-client=800;deviceside=true;apn=hca-ecc.hca.group;tunnelauthusername=forma02;tunnelauthpassword=hcaforma" );
but it's always giving me transmission failed without any error that may help me when debugger run.
Thakx in advance.

Hello Merry,
Have you tried searching 'blackberry' in SDN. I found following and many more links. It gives me impression that you may have to use MDS and also may be SAP Webdynpro technology for UI rendering.
blackberry integration with Mobile Infraestructure
There seems to be special site from blackberry for SAP integration (free registration).
https://www.blackberry.com/CorpDevZone/download/SAP/sap.shtml
Re: Steps to show data on actual Blackberry :) Urgent please....
Hope this will give you some headway in resolving your issues.
Regards,
Vandana.

What are the System pre-requisite for the BODS installation(SAP Data services)

I am trying to install SAP Data services, please help me to get system pre-requisite. checked in PAM but i couldnot get it.

Hi Siddhu,
Please refer to the below SCN Link which will give you all the details and pre-requisites before instalalling DS 4.x
Tutorial: How to install SAP Data Services 4.2 - Part 1
Regards
Arun Sasi

SAP Backup service

Similar Messages

Maybe you are looking for