SAP BO Data Services XI 3.2 - Cannot Handle Multithreaded RFC Connection?

Hi Guys,
Just want to ask for your inputs if Data Services cannot handle multiple RFC connection request to BW system?
The scenario is:
There is one BODI job using RFC connection and trigger the 2nd job at the same time and it happen that the 2nd job failed.
Current version of SAP BO Data Services XI 3.2 that we are using is 12.2.2.1
Thanks in advance,
Randell

Arpan,
One way to get to the multiprovider data is to use Open Hub with a DTP that gets the data from the multiprovider and exposes it as an open hub destination to Data Services. With Data Services XI 3.2 we now fully support Open Hub where Data Services will (1) start the process chain to load the data (2) read the data when process chain ended and (3) notify Open Hub when done so that the data can be purged again.
More info on Open Hub here : http://help.sap.com/saphelp_nw04/helpdata/en/1e/c4463c6796e61ce10000000a114084/content.htm
But I will also look into the why we show the multiproviders when browsing the metadata, but get an error when trying to extract using the ABAP method (not via Open Hub). You could be right in your assumptions below and we might just need to hide the multiproviders when browsing metadata.
Thanks,
Ben.
Edited by: Ben Hofmans on Jan 5, 2010 6:06 PM - added link to Open Hub documentation which references multiproviders as possible source.

Similar Messages

SAP BO Data Services - Bits Are One - O - f O hex operator

Hi Gurus,
I need to implement the Bits Are One - 'O' Bit Sequence Comparison opertor in SAP BO Data Services. The equivalent in SAP ABAP would look like:
IF O hex01. ftab-inp = on. ENDIF.
IF O hex02. ftab-req = on. ENDIF.
IF O hex04. ftab-out = on. ENDIF.
IF O hex08. ftab-act = on. ENDIF.
IF O hex16. ftab-int = on. ENDIF.
IF O hex32. ftab-inv = on. ENDIF.
I need to know how I implement this in SAP BO data services. Please help.
The ABAP help for the same is as follows:
Comparing Bit Sequences
Use the following three operators to compare the bit sequence of the first operand with that of the second:
<operator> Meaning
O bits are one
Z bits are zero
M bits are mixed
The second operand must have type X. The comparison takes place over the length of the second operand. The first operand is not converted to type X.
The function of the operators is as follows:
O (bits are one)
The logical expression
<f> O <hex>
is true if the bit positions that are 1 in <hex>, are also 1 in <f>. In terms of set operations with bit sequences, this comparison is the same as finding out whether the set represented by <hex> is a subset of that represented by <f>.
Z (bits are zero)
The logical expression
<f> Z <hex>
is true if the bit positions that are 1 in <hex>, are 0 in <f>.
M (bits are mixed)
The logical expression
<f> M <hex>
is true if from the bit positions that are 1 in <hex>, at least one is 1 and one is 0 in <f>.
Caution: The following programs are no longer supported in Unicode systems:
REPORT demo_log_expr_bits .
DATA: text(1) TYPE c VALUE 'C',
 hex(1) TYPE x,
 i TYPE i.
hex = 0.
DO 256 TIMES.
i = hex.
IF text O hex.
 WRITE: / hex, i.
ENDIF.
hex = hex + 1.
ENDDO.
The output is as follows:
00 0
01 1
02 2
03 3
40 64
41 65
42 66
43 67
Here, the bit structure of the character 'C' is compared to all hexadecimal numbers HEX between '00' and 'FF' (255 in the decimal system), using the operator O. The decimal value of HEX is determined by using the automatic type conversion during the assignment of HEX to I. If the comparison is true, the hexadecimal number and its decimal value are displayed on the screen. The following table shows the bit sequences of the numbers:
hexadecimal decimal Bit sequences
00 0 00000000
01 1 00000001
02 2 00000010
03 3 00000011
40 64 01000000
41 65 01000001
42 66 01000010
43 67 01000011
The bit sequence of the character 'C' is defined for the current hardware platform by its ASCII code number 67. The numbers that occur in the list display are those in which the same bit position is filled with 1 as in the bit sequence of u2018Cu2019. The sequence 01000011 is the universal set of the bit sequences.
Best Regards, Murugesh

*

How to Load External Data to SAP BPC using SAP BO Data Services

Hi,
We want to load data from an external MS SQL Server DB to SAP Business Planning and Consolidation (BPC 7.5 Netweaver version) using SAP BO Data Services 4.0 as ETL. What is the best way to load data to SAP BPC using Data Services?
Thanks

Hello Devi,
There are three ways you can load Master Data in BPC
1) Copy and paste.
Download master data in flat file .Copy the master data and paste in members of dimension after that process the dimension.
2) Using SISS Pakage - load Flat File into BPC-Cube
3) Using SQL Command.
Thanks.
With regards,
Anand Kumar

SAP BI - Data Services connection

Hello
I am trying to set up SAP BI - Data Services connection.
Couple of questions :
1. Where from within the SAP can I get SAP gateway hostname and SAP gateway service name
2. I have a developer right on BW. Is it enough to make connection with my user id?
3. connection to BW is via client security portal. Does it change the approach?
Thanks

Hi,
1. Where from within the SAP can I get SAP gateway hostname and SAP gateway service name
From the sapgui.
2. I have a developer right on BW. Is it enough to make connection with my user id?
Yes
3. connection to BW is via client security portal. Does it change the approach?
What does that means? you need a user and password in BW (ABAP).
As suggested by Andrei, read the wiki. It has all you need to make it work.
Hope this helps.
Cheers,
Diego

Connect SAP BO Data Services to Azure Blob Storage

Hi,
I want to connect SAP BO Data service to Azure Blob Storage. Is there a way to achieve this?
Thanks,

Hi Anton,
As of now, it is not possible for SAP BO Data Services to connect with Azure Blob Storage. However, you may put down your requirement in Azure Feedback, so that concerned development team can get it done in near future.
http://feedback.azure.com/forums/34192--general-feedback
Regards,
Manu Rekhar

SAP BO Data Services Repository Login error

Hi All,
I am a new SAP data services 4.0 user. I am getting following error while connecting to the repository while starting the designer.
ERROR: ODBC call <SQLDriverConnect> for data source <SERVERNAME> failed. <[Microsoft][ODBC SQL Server Driver][DBNETLIB] SSL security error>. Notify customer support. (BODI - 1112172)
However, it worked just fine initially and suddenly started throwing the above error.
Kindly help.
Regards,
Developer

I did manual registration of BODATAVIEW.ocx . Its working fine now.

DR on SAP BusinessObjects Data Services

Hi Experts,
Greetings.
We are planning to implement the DR setup for Business Objects Data services. It would be helpful if you could share us step perform the DR on SAP business objects Data services.
Regards
Sebastian A

Hi,
Data Services Repositories are usually hosted in databases. This means the DR recovery options setup for the database server that hosts the Data Services will protect the code held in the repositories for DR purposes.
As far as setup is concerned, you can take a point-in-time image of the data services app server, jobserver and configurations so that it can be used for DR purposes.
This is only high level. But you can use this as the base to discuss disaster recovery options with your infrastructure counterpart defining the DR recovery options.
kind regards
Raghu

SAP to Data Services System (Business Objects)

Hi,
Currently there is an RFC connection between Data Services and R/3 which exchange three idocs. Each idoc has an volume of 30k per day.
As we are trying to introduce PI as central broker, will it be recommended to bring PI into the scope thinking on the performance head.
As this would be simple idoc to idoc conversion, let me know the things that will help to reduce the performance overhead.
Also should i be using RFC adapter between PI and Data Services.
Also since the licensing model is based on CPU, what effect will it bring with these three interfaces?
Is there any other connectivity that we can try apart from simple RFC

Hi,
>>>Do you mean to say with dual stack, Idoc adapter is available both in ABAP as well JAVA.
yes you can use any of the two
but if you want to use ICO you can only use IDOC_AAE (java stack idoc adapter)
>>>I thought idoc adapter would present in Java stack when you go for java stand alone installation only.
no, with dual you also get it
>>>>That would solve my volume issues. What is the best way to find the size of an idoc?
send it via PI or easier and without PI - send it to an XML port (but this will give you the XML idoc size)
Regards,
Michal Krawczyk

Data load from R3 is slow and gives rfc connection error

Hi all, is there any debug capabilties available on BI 7.0 when it comes to debug data load from R3 using rfc connection ( aleremote and bwiremote users )
any ideas where can I look for solution.
thanks.

Hi,
Check the connection between the R/3 and BW.
or It may be the network problem contact system admin or basis people.
thanks,
dru

Data Services 4.0 client cannot login to CMS

Hi,
I just installed DS 4.0 on my Windows 7 laptop. I received the Central Management Server connectivity information from my DS administrator, but I'm not able to connect to it when I launch Designer. The error message is very generic: "SDK Failure".
However, I am able to open a Remote Desktop session to the box on which CMS runs and have no problem launching Designer and logging in with the same credentials.
I've tried logging in on my laptop using a port specification as well, but no such luck. I was thinking maybe the port on which CMS is broadcasting is blocked on our network...and our DS admin is looking into that, but I was wondering if anyone had other ideas.
Thanks.

Hi Jorge,
We had to fix the DNS entry for our CMS. The entry had the correct CMS host name, but the wrong IP address for that server. This explained why we could not login to the server from another PC by host name, but were able to login once we did a Remote Desktop session to the box itself via the server IP address.
Hope that helps.

Data Services 12.2.2.0 cannot open connection to the repository NEW Install

I can connect to the repository DB using Toad and SQL Management Studio, but I cannot connect with DS. I've tried 12.2.0.0 and most recently 12.2.2.0 - nothing is working, any helpful advice is appreciated.
DS SERVER
SAP BusinessObjects Data Services XI 3.2 on Windows 2008 Server Standard 64bit SP2
DBMS SERVER
SQL 2005 (Microsoft SQL Server Standard Edition (64-bit)) on Windows 2K3 Server R2 Enterprise SP2 64bit (Microsoft Windows NT 5.2 (3790))
ERROR
Cannot open connection to the repository. The error message from the underlying DBMS is <ODBC call <SQLDriverConnect> for data source <10.101.212.35> failed: <[Microsoft][ODBC SQL Server Driver][DBNETLIB]Invalid connection.>. Notify Customer Support.>. (BODI-20006)
DS VERSION
SAP BusinessObjects Data Services
Version: 12.2.2.0

Hi,
which middleware are you using to connect to the sql2005 server ? For DS3.2 SP2 noyl the following middleware is supported to connect to MS SQL2005 RTM - SP3
Microsoft ODBC MDAC 2.8 SP1 or later
Regards
-Seb.

Error while loading data into SAP BW using BO Data Services......

Hello All,
I have a job to load data from SQL Server to SAP BW. I have followed the steps got from SAP wiki to do this.
1. I have created an RFC connection between two servers(SAP and BODS Job Server)
when I schedule and start the job immediately from the SAP BW, i get this error and it aborts the RFC connection....
"Error while executing the following command: -sJO return code:238"
Error message during processing in BI
Diagnosis
An error occurred in BI while processing the data. The error is documented in an error message.
System Response
A caller 01, 02 or equal to or greater than 20 contains an error meesage.
Further analysis:
The error message(s) was (were) sent by:
Scheduler
Any help would be appreciated......
Thanks
Praveen...

Hi Praveen,
I want to know which version of BODS you are using for your development of ETL jobs?.
If it's BODS 12.2.2.2 then you will get this type of problems frequently as in BODS 12.2.2.2 version , only two connection
is possible to create while having RFC between BW and BODS.
So , i suggest if you are using BODS 12.2.2.2 version , then upgrade it with BODS 12.2.0.0 with Service PACK 3 and Fix Pack3 .
AS in BODS 12.2.3.3. we have option of having ten connection parallely at a time which helps in resolving this issues.
please let me know what is your BODS version and if you have upgraded your BODS to SP3 with FP3 , whether your problem is resolved or not..
All the best..!!
Thanks ,
Shandilya Saurav

Extracting Data from SAP ERP using BODI/Data Services 4.0

HI,
I am trying to extract data from SAP ERP via SAP extractors using BODI/Data Services 4.0.
I do not have my own ERP system so I am renting remote access from one of the many available on the internet.
I am able to connect BODI to the ERP system and import the extractors metadata.
The problem I am experiencing is that when I run job to extract the data I get the following error:
Vendor-supplied function module <Z_AW_RFC_READ_EXTRACTOR> not found. Ensure that you can execute the function module in SAP via transaction /nSE37.
How do I create the function? Or is the function a SAP standard function?
SAP ERP system being used is: ECC6 EHP4
User has SAP FULL and DEVELOPER authorizations.
Any assistance would be appreciated.

You might have better luck in the (somewhat misnamed) [Data Integration and Data Quality Management|Data Services and Data Quality; forum:
This forum is dedicated to topics related to SAP BusinessObjects Data Services (Data Integrator, Data Quality Management, Text Data Processing), SAP BusinessObjects Information Steward (Metadata Management, Data Insight), SAP BusinessObjects Rapid Marts and SAP BusinessObjects Data Federator.
(emphasis added)
Regards,
Sean

How do I create rules files in Sap Data Services

Hello Guys,
I'm new with Bo Sap Development Data Services, and am migrating SSIS packages 2008 for the bods.
I am studying the process of cleanup and word processing via bods.
But I noticed that my installation does not have Rules Files.
My question is:
How do I create rules files in Sap Data Services library with support for Portuguese?

Hello Ramana,
So with version 4.2 of Sap Data Services do not currently have the rules files?
How to mount files for text comparison Cleanse facing Addresses, Names, Clients, Companies? If you can give me some help link?
Thanks again ...

Data Services 4.0 Designer. Job Execution but empty log file no matter what

Hi all,
am running DS 4.0. When i execute my batch_job via designer, log window pops up but is blank. i.e. cannot see any trace messages.
doesn't matter if i select "Print all trace messages" in execution properties.
Jobserver is running on a seperate server. The only thing i have locally is just my designer.
if i log into the Data Services management console and select the job server, i can see trace and error logs from the job. So i guess what i need is for this stuff to show up in my designer?
Did i miss a step somewhere?
can't find anything in docs about this.
thanks
Edited by: Andrew Wangsanata on May 10, 2011 11:35 AM
Added additional detail

awesome. Thanks Manoj
I found the log file. in it relevant lines for last job i ran are
(14.0) 05-11-11 16:52:27 (2272:2472) JobServer: Starting job with command line -PLocaleUTF8 -Utip_coo_ds_admin
 -P+04000000001A030100100000328DE1B2EE700DEF1C33B1277BEAF1FCECF6A9E9B1DA41488E99DA88A384001AA3A9A82E94D2D9BCD2E48FE2068E59414B12E
 48A70A91BCB -ek******** -G"70dd304a_4918_4d50_bf06_f372fdbd9bb3" -r1000 -T1073745950 -ncollect_cache_stats
 -nCollectCacheSize -ClusterLevelJOB -Cmxxx -CaDesigner -Cjxxx -Cp3500 -CtBatch -LocaleGV
 -BOESxxx.xxx.xxx.xxx -BOEAsecLDAP -BOEUi804716
 -BOEP+04000000001A0301001000003F488EB2F5A1CAB2F098F72D7ED1B05E6B7C81A482A469790953383DD1CDA2C151790E451EF8DBC5241633C1CE01864D93
 72DDA4D16B46E4C6AD -Sxxx.xxx.xxx -NMicrosoft_SQL_Server -Qlocal_repo coo ds local
 repo_azdzgq4dnuxbm4xeriey1_e" -l"C:\Program Files (x86)\SAP BusinessObjects\Data Services/log/js01/tip coo ds local
 repo_azdzgq4dnuxbm4xeriey1_e/trace_05_11_2011_16_52_27_9__70dd304a_4918_4d50_bf06_f372fdbd9bb3.txt" -z"C:\Program Files
 (x86)\SAP BusinessObjects\Data Services/log/js01/tip coo ds local
 repo_azdzgq4dnuxbm4xeriey1_e/error_05_11_2011_16_52_27_9__70dd304a_4918_4d50_bf06_f372fdbd9bb3.txt" -w"C:\Program Files
 (x86)\SAP BusinessObjects\Data Services/log/js01/tip coo ds local
 repo_azdzgq4dnuxbm4xeriey1_e/monitor_05_11_2011_16_52_27_9__70dd304a_4918_4d50_bf06_f372fdbd9bb3.txt" -Dt05_11_2011_16_52_27_9
 (BODI-850052)
(14.0) 05-11-11 16:52:27 (2272:2472) JobServer: StartJob : Job '05_11_2011_16_52_27_9__70dd304a_4918_4d50_bf06_f372fdbd9bb3' with pid '148' is kicked off
 (BODI-850048)
(14.0) 05-11-11 16:52:28 (2272:2072) JobServer: Sending notification to <inet:10.165.218.xxx:56511> with message type <4> (BODI-850170)
(14.0) 05-11-11 16:52:28 (2272:2472) JobServer: AddChangeInterest: log change interests for <05_11_2011_16_52_27_9__70dd304a_4918_4d50_bf06_f372fdbd9bb3> from client
 <inet:10.165.218.xxx:56511>. (BODI-850003)
(14.0) 05-11-11 17:02:32 (2272:2472) JobServer: RemoveChangeInterest: log change interests for <05_11_2011_16_52_27_9__70dd304a_4918_4d50_bf06_f372fdbd9bb3> from client
 <inet:10.165.218.xxx:56511>. (BODI-850003)
(14.0) 05-11-11 19:57:45 (2272:2468) JobServer: GetRunningJobs() success. (BODI-850058)
(14.0) 05-11-11 19:57:45 (2272:2468) JobServer: PutLastJobs Success. (BODI-850001)
(14.0) 05-11-11 19:57:45 (2272:2072) JobServer: Sending notification to <inet:10.165.218.xxx:56511> with message type <5> (BODI-850170)
(14.0) 05-11-11 19:57:45 (2272:2472) JobServer: GetHistoricalLogStatus() Success. 05_11_2011_16_52_27_9__70dd304a_4918_4d50_bf06_f372fdbd9bb3 (BODI-850001)
(14.0) 05-11-11 19:57:45 (2272:2472) JobServer: GetHistoricalLogStatus() Success. 05_11_2011_16_52_27_9__70dd304a_4918_4d50_bf06_f372fdbd9bb3 (BODI-850001)
it does not look like i have any errors with respect to connectivity? ( or any errors at all....)
Please advise on what, if anything you notice from log file and/or next steps i can take.
thanks.

SAP BO Data Services XI 3.2 - Cannot Handle Multithreaded RFC Connection?

Similar Messages

Maybe you are looking for