SAP BO Integration Kit 3.1

Hello!
I am in the process of downloading SAP BO Integration Kit 3.1, however when I do a download I get this Download Manager pre-requisite for the Kit download, and plus the J2re 1.4 and J2SDK 1.4 to be pre-installed. I tried installing the J2RE 1.4 but it throws up an error message for "Current Internet Proxy Settings".
Has anyone encountered this error message, or has the solution to this. Any valuable suggestions are highly appreciated.
Thanks!
Vivek.

Hi Ingo,
Thanks a lot for the info. I got the IP address changed and that did the trick for me. Will be downloading and installing the Integration Kit 3.1, will post queries related to that in this thread like you mentioned.
Thanks!
Vivek.

Similar Messages

  • Integration Kit for SAP BO Edge 3.1

    Hi all,
    We have successfully installed SAP BO Edge3.1,Crystal Reports 2008 and Xcelsius Engage (all these came as a package for Edge Installation).
    Some suggested that for BO Edge 3.1 we need to have SAP BO Integration Kit XI R2.But we are facing some problems while installing the Integration Kit XI R2.
    Please suggest- is there any separate Integration Kit for Edge Series or we can install the Integration Kit of Enterprise itself?
    If so please give the path from where we can download it
    Regards,
    Pra

    Hi,
    Thanks for your replies.
    Ingo - can you please make it clear if  the Integration Kit XI 3.1 is related to Edge Series or Enterprise?
    Sri - If there is a separate Integration Kit for Edge Series platform,please let us know the path for the dowload.
    Awaiting for your responses
    Regards,
    Pra

  • Business Objects and SAP BI Integrated Planning

    Hi,
    Not too sure if this is in the correct forum...but I have question.
    Is there a way to use the integrated planning functionality with a Business Objects Front end tool? As I understand BEx will at some stage will not be supported...so I guess there must be a tool. If so which one?
    Thanks,
    Leo

    Hi Leo,
    The Business Objects << SAP Solutions Integration Kit >> enables Web Intelligence, Yoyager, and Crystal reporting on the following SAP sources:
    1. SAP BW   (Infoset, BW Query, BW MDX and ODS)
    2. SAP R3 / mySAP ERP  (transparent tables, pool tables, cluster tables, views, ABAP functions and ABAP data clusters)
    & Also web portal integration to:
    3. SAP Enterprise Portal  (SAP's Knowledge Management - Repository Framework Interface, iViews etc)
    So..  if you can consolidate your planning data into a cube datatarget, you might be in with a chance!
    I hope this helps.
    Regards,
    Henry

  • Crystal Reports 2008 - SAP B1 Integration

    Hi
    I had received the CD from SAP which contained Crystal Reports 2008 Basic for B1.  The installation went very ok and i am able to Launch Crystal reports 2008 from outside SAP B1.  (Program File, Business One, Crystal 2008)
    However, i do not see the SAPCrystalSetup.exe either in the CD i received or on the portal to download anywhere. (Which is used for integrating SAP B1 and Crystal report).  This utility according to the technical tips for installation mentioned in https://websmp103.sap-ag.de/~sapidp/011000358700000727712008E.htm will enable SAP B1 menu with Crystal reports integration sub menu options
    Can any body help
    regards
    Manian

    Hello Manian,
    I recommend to post this query to the [Integration Kits - SAP|BusinessObjects Integration Kits; forum.
    This forum is dedicated to topics related to the BusinessObjects Integration Kit for SAP.
    It is monitored by qualified technicians and you will get a faster response there.
    Also, all SAP Kit queries remain in one place and thus can be easily searched in one place.
    Thanks a lot,
    Falk

  • Any updates on when BOE will support a MS SP2010 integration kit?

    My question is when will the SP2010 integration kit be in general release to customers?
    Will this be something that can be downloaded in 2011?
    Any unofficial guesses as to year and quarter of release of the SP2010 integration kit?
    I heard at teched 2010 the SP2010 integration kit would come out around BOE 4.2.   I would expect we need to be on a 64 bit BOE 4.x to integrate.  Just wondering if the kit maybe release before 4.2.
    Thanks in advance.

    I will close and move this off to the correct area.  I have been pleased with the SAP NW integration kit.  I felt it easy to maintain through the KM iView.  I would only hope the SP integration kits work as well.  Going to install SP2007 kit.  Do you have an opinion on the SP2007 integration kit?
                 Thank you
                                    Eric Barfield  -- Lockheed Martin

  • Error after uninstalling the SAP Integration Kit XI 3.0 on Unix

    Hi all,
    I have uninstalled the SAP Integration Kit XI 3.0 on a single solaris server installation. Uninstall was done exactly as instructed in the manual and everything looked ok.
    Now when I try to go to the login page of CMC or InfoView I get an error:
    type Status report
    message /PartnerPlatformService/service/app/logon.do
    description The requested resource (/PartnerPlatformService/service/app/logon.do) is not available.
    Is the login page trying to look for the SAP authentication page that was removed ?
    Is there some configuration still remaining somewhere that needs to be removed so I get the old login page back ?
    Thanks for ideas, Timo

    Thanks for pointing to the right direction. I changed the tomcat webapps web.xml file parameter and it was enought to start working again.
       <context-param>
            <param-name>config.logon.service.context</param-name>
            <param-value>/PlatformServices</param-value>
        </context-param>

  • Error while Importing Integration kit  Transport Requets into SAP ECC 5.0

    HI ,
    1.  AT BO side -> I can see the many roles, but under 'role import tab'  in CMC  when i add any 'role' and click on update button,
         system showing an  error as below .
       "Failed while trying to get user list using class CSecRfcRemoteUsersActGrp in method CSecSAPR3Binding::GetUsersInternal(). Error code: 3. Description: Syntax error in program /CRYSTAL/SAPLSECURITY .. "
    2. After successfull installation of integration kit on windows 2008 server, i have imported the transport request into SAP ECC    
       5.0 When i  imported open sql connectivity transport request, i got error mesage . The error message number is 8 and it came
      for Generation of programs and screens. i have installed sap gui 710 ( verion : 7100.1.0.1027).
      I also transported remaining transport request (infoset, row level, cluster definition, security functions) but all these request
      contain similar error. Now when i try to login into sap  its going dump.Is there any possibility of reverting back the transport
      requests.
      Pls help me to fix these issues.
    Edited by: sheshikanth reddy on Apr 14, 2010 2:15 AM

    Hi ingo,
    Now i can able to transport successfully after following the order.
    Thank you very much
    Edited by: sheshikanth reddy on Apr 14, 2010 11:46 PM
    Earlier i have imported non unicode request numbers into sap unicode system.
    tats why i got error.
    Now i have imported unicode request number to unicode sap system with sequence.
    Edited by: sheshikanth reddy on Apr 15, 2010 12:19 AM

  • Error while updating SAP Integration Kit XI 3.1 to SP3

    Dear All,
    I have updated BusinessObjects Enterprise XI 3.1 and Integration Kits for SAP XI 3.1 to SP3.
    The update of BusinessObjects Enterprise XI 3.1 was fine. While updating IK for SAP, the installation shown the following error
    sapweb_rri.dll failed to register.
    sapweb_parameter.dll failed to register
    Then I completed the installation by 'Ignore' ing the above installer informations.
    Now I am getting the following error
    "Account information not recognized: Plugin Manager error: Unable to locate the requested plugin secSAPR3 on the server. (FWB 00006)"
    Before the update, the setup was working fine.
    Does this ignored error caused the problem?
    Please help me to resolve the issue.
    Thanks and Regards,
    Yuvaraj

    Thank you.
    I have the following questions, for this full installation of IK SP3,
    I have imported transports from IK XI 3.1 for R/3 and BO connection in R/3.
    Does the transport that comes with IK SP3 is modified?
    And also some reports are developed based on the datas from R/3.
    Does this complete uninstallation of IK affects the existing contents?
    Regards,
    Yuvaraj.

  • SAP Integration kit for BO XIR2 with Crystal XI for BI 7.0 Front end

    Hello Team,
    We are in a little fix.
    We have BOE XIR2, Crystal XI and working with old version of BI front-end 3.5.
    We are upgrading to BI 7.0 frontend, but I am not able to trace out the SAP Integration kit for combination of BOE XIR2, Crystal XI and BI7.0.
    Is such a thing available, If yes can someone send a link to that.
    Regards
    Lalan Kanade

    Hi,
    Thanks for the quick reply
    I could trace this document.  "BusinessObjects Enterprise XI Release 2 SP3 for Windows"
    I checked in "Supported Data Sources for Crystal Rep" section, extract below
    SAP BW Server 3.0b SAP GUI 620 or 640
    SAP BW Server 3.1c SAP GUI 620 or 640
    SAP BW Server 3.5 SAP GUI 640.
    But we are using BW Server 7.0 with GUI 7.1 and that working fine even with BOXIR2 and Crystal XI with Old Front End for BI 3.X.
    But when we are testing with BOXIR2 and Crystal XI with BI New Front End 7.0 its missing components from the query output.
    So the SAP Integration kIt seems old & we need a new Kit which would work with BI New Front End 7.0.
    Any suggestions on that
    Regards
    Lalan

  • BOE XI 3.1 + SAP Integration Kit on AIX 5.3 with WebSphere 6.1 (SOLVED)

    Hi everybody!
    On a recent installation I encountered a problem with SAP Integration Kit using BW Query with prompts; I want to share with you what I did to solve this problem:
    First of all, the environment:
    IBM Server with AIX 5.3
    BO Repository on DB2 9.5
    Application Server IBM WebSphere 6.1
    BOE XI R3.1
    Crystal Reports 2008 SP1
    After installing and configuring everything on the system, I encountered some problem launching in InfoView reports created with Crystal Reports 2008 based on BW query with SAP Prompts.
    The error that I recieved everytime was:
    com.sap.mw.JCO.$Function
    What I did to solve this was:
    1) Configure the absolute complete classpath inside the Application Server (path/sapjco.jar)
    2) Put the sapjco.jar version 2.18 at 32bit (unix version) that you can download at  https://websmp108.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000463654&
    Hope this helping you
    Bye
    Andrea

    Dear Gurus,
    The issue I am facing is described exactly in the document "Upgrading to CR 2008 V1 / SP1" by Blair Wheadon.
    The problem occurs when installing CR2008v1 and BOE 3.1 on the same machine.
    The solution is to download and install SP1.
    Unfortunately for me, I have downloaded SP1 but the installation is not going well.
    Message prompts that installation files are corrupt and that I should download again.
    I have downloaded twice. And tried several times.
    So I guess it might be due to the platform.
    But why wasn;'t the message displayed after BOE3.1 installation was completed?
    Do you guys have an idea?
    Alice

  • Error while installing SAP integration kit 3.1

    Hi,
    I installed SAP integration kit 3.1 on one server and it is working fine but when i am installing same installable on another server it is giving error as "Installation ended prematuarly because of an error". I dont know how to debug the error. Please help me.
    Thamnks in advance

    Hi Sonali,
    had a similar problem on a Windows/Tomcat system. The installation was crashing before trying to deploy the .jar files. If you are facing the problem in a similar environment please make sure that you have copied the librfc32.dll and the sapjco.jar files in the correct directories. Especially for sapjco.jar doublecheck the path you have copied the file into.
    Regards,
    Stratos

  • Error when installing the Integration Kit for SAP

    Hello,
    When installing the integration Kit I get the following error:
    The installation of BO XI Integration for SAP Solutions cannot continue because WACS has been installed with BO Enterprise.
    i have seen in BO-SAp Integration Kit Installation Error that I have to had selected the point Install Tomcat application server option, but I was not asked to.
    I'm following the blog BusinessObjects and SAP - Part 1 of 4, and my installation screens are similar but not equal. for example, I fon't have the installation type new, but the quickk type. And I cannot select the database, too.
    Of course the screen asking about the Web Application server with the option of installing the tomcat application server doesn't appear.
    What have I done wrong?
    What is the solution? Reinstalling everything but doing what?
    Thanks and regards,
    Ana.

    Hi Ingo,
    Yes, it is BO Edge.
    I have deinstalled the BO Edge sw and now I have installed it again. This time I have selected the export installation type and I have select the TOMCAT. The installation has finished successfully, but when installing the SAP integration Kit, I have the same problem. The message about the WACS already installed appears again.
    What else can I do?
    Thanks and regards,
    Ana.

  • Crystal Developer XI without Sap integration kits cant see released Queries

    Hi All!
    When I'm used MS Excel, I can see released SAP BW Queries via SAP OLE DB access. But when I'm used Crystal Developer XI (without Sap integration kits), I can’t see released SAP BW Queries via SAP OLE DB access.
    What's a problem here?
    WBR Artem

    Hi,
    you missing the SAP integration Kit. To conenct to SAP BW you need the SAP Integration Kit installed.
    ingo

  • Default language settings in SAP Integration Kit?

    Hi everybody,
    I've the following problem:
    If I create a report with the SAP Integration Kit (create new report from a query) I get a prompt where I can type in (System Number, User, Password and LANGUAGE). If I now choose as language u201CEnglishu201D and create a report, save it and open it in crystal again, everything is still fine. But if I go to refresh the report, I get a prompt where I can choose the SAP BW and type in the System Number, User and Password but not the LANGUAGE. After the refresh the names of the fields are still in English but the data is now in German (or just the technical names, depends on the language settings in the query).
    For me it looks like that the language settings of the refresh are by default in crystal is set to German, but the software is English. I didnu2019t find any way to change the default language to English or save it in the report.
    I already tried to change the language/regional/keyboard settings of my machine and also tried to change the language in the crystal formula field u201Clanguagecode%u201D.
    But even if I could have a unique change in some system settings, it really will not help me, because I have some queries in German and some in English, depending on the actual BW system.
    If the SAP Integration Kit gives me the possibility to choose the language during the creation of the report it should then remember the choice!?
    Thank you for your help

    Post your question to the Business Object Integration Kits forum

  • How to import the transports from the SAP Integration Kit into SAP system

    Hi expert,
    I read the forum "Re: Integration with SAP R/3 to realise i have not done the import of transport but i don't quite understand the statement give by "Sebastian Li".
    "Unpack the SAP Integration Kit zip-file. It contains a transport-folder. Here you'll find a short manual which files you should import.
    Copy the needed files on your sap-system in the correct folders:
    - usr\sap\trans\cofiles
    - usr\sap\trans\data
    Use the transaction STMS.
    Also take care of the sequence of importing. See the manual for details."
    Can some one explain it in more details to me. I have unzip the SAP Integration Kit n in the transport folder got 2 more folder "ansi" and "unicode_compatible". How do i know which 1 to use? Where i should copy this files to?
    Please advice.
    thank you

    Hi Rajesh,
    check this : logon failed. you do not have the necessary rights to design reports
    @Sri

Maybe you are looking for

  • VAT issue in Intercompany billing

    Dear All, My case, sending stocks from country DE to AT, DE plant belongs to NL company code. while in F2 invoice its picking ship to country is AT correctly, but when we do Intercomapny billing system picks ship to as AT customer but country SIS tax

  • Does Apple still sell MacBook Pro non-Retina display?

    I would like to know if Apple still sell a MacBook Pro with non-Retina display

  • Need advice about H.264 and Apple ProRes 422.

    When exporting a "master file" I can encode the video as H.264 or Apple ProRes 422 (etc). The H.264 is more compressed but still in 1080p? Does this mean that I do not have to compress the file with "Compressor"? What is the advantage of using ProRes

  • Sum of all the values in a field

    I have a report which needs to sum all the values of KONV-KBETR where KONV-kinak NE 'A'. How do i write the code. Can anyone help me in wrting the code.. This value i have to finally display in my internal table as one value.

  • No business key column is identified on existing dimension - Slow chg dimension

    Hi, I m working to insert/update my Dimension table (in datamart) using SSIS "Kimball Method SCD component " tool. I have different columns as PK in source and identity column as PK in Dimension table. I also have Unique Index on the columns in dimen