SAP Business One Integration Services Authentication Failed

Dear ,
ALL SAP forum members,
Iam Using SAP Business One 8.81 PL 06, Micorsoft SQL 2008 R2
In SLD B1DI and JDBC, the connections were tested successfully.
Whenever I log into SBO, I am getting "SAP Business One Integration Services Authentication Failed" error message. I did extensive research on all possible SBO documents dating 1 year back especially in B1ic Troubleshooting Document (New and Old) and searched the length of the SBO forums, but I could not a solution.
I uninstalled and reinstalled the B1f package many a time. The integration services we re also restarted many times and the connections were all tested successfully. Firewall, AntiVirus also checked.
In the B1f, in the Monitoring Window, the login is "Ok" but the AuthCheck is "Failed". I checked Authent.Monitor->Authentic Info and I found the following message under Action message "Wrong Usrname and Password".
I debugged and i found again "/com.sap.b1i.vplatform.scenarios.authen/sap.Xcelsius/Authenticate_Check.bfd
But could not understand much of it.
But i could go no further. The experts are requested to suggest their solutions, If any, to me as Iam stuck in this phase for the last 3 week
I hope some experts will guide me over this issue
Thanks and regards
Ashish Gupte

Hi Konstantin Ryahovsky
Thanks for your reply. My problem is solved.
And frankly speaking i dont know how it was solved. I have not uninstall, install ,not even i had restarted the server also.
only change i did in SLD >> Maintainance >>> cfg Runtime >>>> Put server IP address instead of server Name and restarted the services.
Thanks & regards
Ashish Gupte

Similar Messages

Cannot start widget - Ensure that SAP Business One Integration Service and SAP Business One Event Sender Service have been started

Dear Experts .
I'm trying to enable widget for my company db but getting the following error :
Ensure that SAP Business One Integration Service and SAP Business One Event Sender Service have been started; then wait 1 minute and try again
I can connect to the B1iF locally and remotely .
I have the db configured in the SLD and connects successfully .
I have the event sender service and proxy started and configured for the company db.
I can access the Dashboard web portal and login with database sap credentials (but I see nothing there)
I've checked that there are no duplicate entries in the SSLD table for SBO common (note : 1619422)
I've also tried to re-activate the xelcious from the B1iF->control.
My Setup :
I'm runing SBO server, B1iF installed locally and B1iSN installed on a 3rd party server.
I'm using B1iF as even forwarder for B1iSN.
I know this has been discussed many times through out the forum and I've tried most of the stuff other than clean install.
I would appreciate any input before removing B1iF completely and re-installing.
Thanks in advance ,
Nadav.

Hi,
The problem is SAP 8.81 PL04, with PL05 or PL06, it is solutioned.
Thanks,

Error when starting SAP Business One Integration Server Service

Hi all,
I have a very urgent problem when installing B1iSN:
I'm installing B1iSN2007 for a customer (Windows server2008R2, SBO 8.8.1),
and at the beginning of the installation, after instaling the technology, I have an error,
The Tomcat server can't start.
I get the following error:
Windows could not start the SAP Business One Integartion service on Local Computer. For more Information, review the system
event Log.If this is a non-Microsoft service, contact the service vendor, and refer to service-specific error code 0.
In the event viewer I didn't find any more details.
In the tomcat logs (Under SAP Business One Integration\B1iServer\tomcat\logs) I find this:
[2012-01-05 15:12:26] [info] Procrun (2.0.4.0) started
[2012-01-05 15:12:26] [info] Service Tomcat5 name SAP Business One Integration Service
[2012-01-05 15:12:26] [info] Service Tomcat5 installed
[2012-01-05 15:12:26] [info] Procrun finished.
[2012-01-05 15:12:26] [174 javajni.c] [error] The specified module could not be found.
[2012-01-05 15:12:26] [994 prunsrv.c] [error] Failed creating java ..\..\..\jdk1.5.0_xx_sap\jre\bin\server\jvm.dll
[2012-01-05 15:12:26] [1269 prunsrv.c] [error] ServiceStart returned 1
[2012-01-05 15:13:13] [174 javajni.c] [error] The specified module could not be found.
[2012-01-05 15:13:13] [994 prunsrv.c] [error] Failed creating java ..\..\..\jdk1.5.0_xx_sap\jre\bin\server\jvm.dll
[2012-01-05 15:13:13] [1269 prunsrv.c] [error] ServiceStart returned 1
[2012-01-05 15:15:27] [174 javajni.c] [error] The specified module could not be found.
[2012-01-05 15:15:27] [994 prunsrv.c] [error] Failed creating java ..\..\..\jdk1.5.0_xx_sap\jre\bin\server\jvm.dll
[2012-01-05 15:15:27] [1269 prunsrv.c] [error] ServiceStart returned 1
What is the problem? How can I fix it?
Thanks a lot
Chana

Hi Trinidad,
Thanks for your help!!!
1.
I didn't install EventSender and DIProxy yet, I tried first to upload and deploy the zip files, but I couldn't open the Itegration Application Explorer.
2.
The jvm.dll file is in in the folder pointed by the logs: C:\Program Files (x86)\SAP\SAP Business One Integration\jdk1.5.0_xx_sap\jre\bin\server
and it is also in C:\Program Files (x86)\SAP\SAP Business One Integration\jdk1.5.0_xx_sap_64\jre\bin\server
I tried running the file java5w.exe, but I got an error message:
Access is denied
Unable to open the service tomcat5
Thne I managed to open it by "rua as administrator".
the Java Virtual Machine path is points to the java 1.5 version folder.
Is it possible that the reason that the service can't start is related to administrator rigts??
In the properties in the Integration Service (services.msc):
It is set to be run with the local system account.
all other properties looks fine.
in the properties of the tomcat5.exe (and tomcat5w.exe , I tried both)
In the Compatibility tab I tried setting the flag "Run this program in compatibility mode for" to Vista, windows 7, and server 2008
I didn't have the option of Windows XP.
I have also set the Privilege level of: "Run this program as administrator" to true.
But still the service won't start.
What can be the problem?
What else can I check?
Thanks a lot,
Chana

Configuration in SAP Business One integration 8.8 for SAP NetWeaver (B1iS)

hi,
i had schedule the background job (Scheduling Jobs using Tcode, RBDMIDOC) for Master Data Distribution Customer
(DEBMAS).The schedule job show succeed.Then, i go to B1 configuration for B1iSN and define a Business Partner Bizpackage
instance.After that , i go to activate it which under Business Processes --> Process --> Master Data.
How can i know the process was start running because when i go check the Message Log under Monitoring, it;s show nothing ?
Thanks

Hi Elsen,
If you are trying to run B1I and B1iS, they are incompatable on the same machione. That said, I am not clear what type of scenario you are attempting? If the incoming data is in the form of a SBO Object, you can confirm that the action happened on the sending system, also do the same for the reverse on the receiver system.
If the sender system completed the task, then you have setup the inbound criteria or SLD incorrectly therefore not triggering B1i.
I hope this helps you,
Mike

Integrating Java into SAP Business One Via DI Server and the B1WS

Hello Everyone
We are using the B1WS to call the Web Services from our web application. We are able to Generate the WSDL files using the Generator application and now wish to test the connection between our web server and the DI server However I am getting a 404 error from the web service endpoint in the WSDL files (/B1WS/Service.asmx)
I've created a login request from the WSDL which all seems sound, but it's still getting 404 errors when it tries to connect to the endpoint. I've passed the request through tcpmon so I can see the content of it, and the request looks good, but isn't getting any response. Is there any other SAP configuration that needs to be done to publish these services? I have read the Detailed B1WS Word Document and everything seems fine from that standpoint.
In hope, I've made the following configuration changes to the web services application, but am still getting a 404 error:
- Given the ASPNET user and the NETWORK SERIVCE group the required permissions for the SBODI_Server in DCOM configuration.
- Changed the virtual directory home of "B1WS" from
C:\Program Files\SAP\SAP Business One Web Services\B1WS\App_Code to
C:\Program Files\SAP\SAP Business One Web Services\B1WS
This directory has a web.config file, and has the bin files etc, but still seems to be missing a Service.asmx file (this missing , I don't know if that's all that's missing as I don't have any reference application to compare it to as I am using Java.
As usual your help is much appreciated.
Regards
Richard

Hello everyone,
I've had the same problem with the "missing" Service.asmx.
In my case, it helped to activate "Active Server Pages" and "ASP.NET" in the Web Services Configuration in the Internet Services Manager, which were both deactivated by default.
Maybe this can help you along.
Regards,
Andreas
Edited by: Andreas Mantel on Dec 17, 2008 4:51 PM

SAP business one application messaging service

Tried to get mailer working but I am not sure if it s because of SAP business one messaging service is stuck in a starting mode.

Hi,
Yes. Messaging service should started automatically.
I think you need add your object name under Messaging service-->Right click-->Choose properties---Log on tab.. then this service starts automatically.
Thanks & Regards,
Nagarajan

Has some one Integrated File System & SAP Business One using B1iSN?

I have to create a Proof of Concept where, I have to pick up a file from A file System, do some transformation & then call SAP B1 APIs to post documents in SAP Business One.
I am new to B1iSN Technology and was wondering if this is feasible. If Yes, I would appreciate if you can give me some logical steps to follow.
Thanks,
Yogesh

Hi Yogesh,
You find all of the available documentation for B1iP SAP Business One Integration for SAP NetWeaver (B1iSN) [original link is broken] [original link is broken].
Additionally, I can mail you some BFD samples to give you and idea of B1iP coding. If Edward or another SAP employee can send you the IPO samples, that would be ideal, since I believe that they have an implementation of a basic file adapter proto-type.
HTH,
Dhruv

SAP Business One v8.8 (PL12) - Upgrading

Hello Forum
this is my first post so apologies....
I am trying to establish a SAP B1 v8.8 test environment on a 'offline' server. I am encountering 2 issues when installing/upgrading...
Original environment:
         HP ProLiant Server
         5gb RAM
         Windows 2003 R2 Enterprise Server
         (Service Packed and Updated from Windows Update)
Firstly,
    SAP Server Tools / Server / Client will all install using a base of PL05, I can then upgrade this to PL10 (both of which were supplied by our Partner) - I operated on this PL level for a week or so with no trouble what so ever. Later I recieved PL12 on a disc from our Partner and went through the upgrade process from PL10 to PL12.
   This failed showing 'Creatordll.DLL' error straight away when the process started to upgrade the SBO-COMMON database. I could see the Server Tools get upgraded first and then the SBO-Common database getting backed up and as soon as this has completed the error happens. The upgrade then rolls back (Restores) the SBO-Common and then stops advising also that the Server Tools will need a manual restoration.
   MS Visual C++ 2005 Redistributable Package was the only reference that I could find on SDN so I followed the instructions here.
Amended environment:
         HP ProLiant Server
         5gb RAM
         Windows 2008 Enterprise Server
         (Updated from Windows Update)
Secondly,
   When attempting to troubleshoot this problem, the directory "C:\Program Files\SAP\SAP Business One Server " has only the B1_SHR available in Windows Explorer. When I check this against our LIVE environment using SAP B1 2007a the same directory has "B1_SHR \ DI API \ SAP Business One DI API \ B1iServer \ B1iSetup" listed.
When in the PL05 or PL10 environments SAP operates perfectly fine despite the fact that there is no other directories showing here. The base install and upgrade to PL10 completed without error so I had no need to investigate the SAP Business One directory until PL12 failed.
I'm hoping that someone in the Forums can help me out with these issues.
Thanks

Hi Garry,
I would suggest you to download the latest installation package on 8.8 PL10 which is available on the Service Market Place. In order to solve the issue with 'Creatordll.DLL' please follow the steps from the Note [1408662|https://websmp130.sap-ag.de/sap(bD1odSZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1408662]. Issue could be caused due to missing Microsoft ATL security patch.
hope it helps,
Regards,
Ladislav Meszaros
SAP Business One Forum Team

SAP Business One Forum news... - Pre-release of 2005A SP01 for testing

Pre-Release of SAP Business One 2005A SP01 available for SAP partners for testing purposes (only!):
April, 21st: Please note that the SAP Note No. 931019 about "Known issues" regarding SP01 has been updated and has been released.
Please checkout this article about changes, limitations, how to give feedback etc - published in the SAP Business One Developer Area here on SDN!
Here's the direct link to the article:
https://www.sdn.sap.com/irj/sdn/developerareas/businessone?rid=/webcontent/uuid/f3169a1c-0a01-0010-4ebd-abd65b029c71 [original link is broken]
FYI:
- Please note that the 2005A SP01 SDK package includes the SDK samples in C# as well!
- Please note that currently a survey regarding partner feedback on SAP Business One documentation is done in the "SAP Business One Forum" area on Channel Partner Solution Network:
http://cpsn-channel.sap.com/businessoneforum
TechSummit05 TechSummit05 TechSummit05 TechSummit05 TechSummit05
Presntations, Jam Sessions and more...
Go here:
TechSummit 2005 presentations
SDK (basic) E-learning available on SMP and as download package:
SDK (basic!) E-learning avail. on SAP Service Marketpl.(SMP) + as download
Good to remember or know as well:
There's a forum about the new "SAP Business One Integration ...":
Busines One Integration Technology (B1i) forum!!!!
...and (for SAP partners only) there's a forum where you can discuss implementation / sales / ... questions etc.:
Got a question about customization / implementation? Maybe ask it in CPSN!
...and here's the SAP Business One Forum in the "SAP Community" (public to anybody):
Re: Got a question about customization / implementation? Maybe ask it in CPSN!
The "Solution Overview" area in the SMB Portal on SAP Servicemarketplace now provides information on available documents in alphabetical order:
http://service.sap.com/~form/sapnet?_SCENARIO=01100035870000000183&_SHORTKEY=01100035870000654575&_ADDINC=&
Here's a comprehensive post about the SDN "Rules of Engagement":
/thread/117232 [original link is broken]
Forum search tips:
Forum Search Tips
... and last but not least:
Don't forget to check the latest news in the SAP Business One Developer Area:
http://www.sdn.sap.com/irj/sdn/developerareas/businessone
Message was edited by: Frank Moebius

Hi Cristian,
As peter mentioned, Please refer to SDK Online Help=>Content=>Degeloper Guide=>DI Server
In addition, you can the sample code of DI Server here:
<<...
SAPSAP Business One SDKSamplesDI Server>>
As regard to php sample, sorry we don't such sample so far.
Per php, I recommend you to B1WS, a web service wrapper of DI Server for only those 45 services objects. You can download B1WS here: SDK Tools Download:
SAP Business One Tools [original link is broken]
=>SAP Business One Web Services Wrapper Tool
From technical perspective, DI Server is based DCOM technology, I am not sure it is natively supported php. So you may think about wrapping DI server as web server with ASP.net, just like B1WS. php<=>web server<=>DI server
Kind Regards, Yatsea

Cannot connect SAP Business One with iPad

Hey all,
I am new to SAP Business One. And i am exploring SAP Business One Mobile Applicaiton for iPad.
I've tried to follow the step to set up my both SAP Business One and iPad but failed.
The message "Connecting to server" keep loading and after few minutes show me "Tje request timed out (-1001)"
So am I did something wrong? Or miss out something?
Please advice with this problem.
Thank you.
Regards,
Wai Leng

Hey Lisa,
Yes, I've tried what I found in this forum and the Support Portal.
But it's is failed again.
As iPad doesn't really need a mobile phone number, so i just simple key in a number for both SAP B1 and my iPad. Is it any problem?
Another question, I've tested my connection for B1D1, but failed, following is the error message.
com.sap.b1i.adapter.dia.exception.ConnectionFailedException: Connect to Business One failed.
(-107) Unable to connect with the specified username and or password
Anything i miss out?
Thank you.
Regards,
Wai Leng

Installation of SAP Business One client and required administration rights

Dear community,
I would like to kindly ask you for your feedback on the installation of SAP Business One client and its patches on end-user computers.
The pain points I have heard so far are the following:
- The installation of SAP Business One client and its patches has to be started by a user with administrator rights. As far as I know (and please correct me if I am wrong), this is also required in case of installation of any other software.
- End users usually do not have administrator rights and therefore the SAP Business One clients have to be manually upgraded by administrator. This is time consuming (and therefore costly) activity.
We are considering to design a new solution which would overcome the above limitations.
I would like to confirm with you if my understanding is correct:
Question 1:
Is it a common situation that the end-users of SAP Business One client do not have administrator rights and therefore cannot install the patches of SAP Business One client by themselves?
If yes, how do you resolve this currently?
Question 2:
Do you use Microsoft System Center Configuration Manager or Active Directory (or any other 3rd party solution) to automatically distribute software packages and updates to client PCs at your customers?
Question 3:
If the SAP Business One client installation (and its patches) is delivered as MSI package with silent installation capability, would you be able to automate the deployment of B1 client updates to client PC using the abovementioned technologies? Or can you still see some obstacles?
Thank you
Best regards
Jan Ruzarovsky
SAP Business One Product Management

Dear all,
Thank you very much for your comments, very helpful!
@Marco - SAP Business One 8.8 client currently does not support the silent installation / upgrade. However we are currently considering this requirement and we would like to deliver it as soon as possible.
We are currently considering several possible designs. One of them is as follows:
1. A new SAP Business One Updater Service will be installed on each client workstation.
It will be a windows service installed and running under a local system account.
2. The updater service will check regularly if there are any new patches of SAP Business One client or add-ons uploaded to a configured shared directory.
3. If a new patch is found in the shared directory, the updater service will SILENTLY install the new patch (add-ons, SAP Business One) on the client workstation.
The service would be able to install patches even if nobody is logged in.
Questions:
If we consider the above design, there are a few open topics:
1. During the upgrade of the SAP Business One server, the client patches (and SAP add-on patches, partner add-ons) would be placed to a SHARED directory instead of into SBO-Common (as it is implemented currently).
- Does this have any impact on your tools, processes or add-ons?
2. SAP Business One upgrade wizard will put the latest patch of SAP Business One client into a configured shared directory. The shared directory will have to be read-only for everybody in the network to avoid that the valid installation files are replaced by malware or virus infected files
- Can you configure such a shared directory?
From customer perspective, if a new patch is put into the shared directory, the updater service can behave as follows:
1. Manually initiated upgrade of the client
Example: Customer starts the old (not upgraded) SAP Business One client. The client will inform him/her that a new patch has been found and it has to be installed in order to continue working with the client. After customer clicks "Yes", the upgrader service starts the silent installation of the client and informs customer about the progress. Once the upgrade is finished, the upgraded SAP Business One client will be started automatically.
2. Automatic update:
- Update the client automatically (e.g. overnight) if customer is not working with SAP Business One
- If SAP Business One client is running, ask customer if he/she wishes to upgrade the client now or to delay the upgrade by X minutes.
Question: Which of the above two scenarios would you and your customers prefer?
If the upgrade is fully silent, automated and handled by the upgrader service, Is it acceptable for customers to trigger the installation manually and wait till the client is upgraded? Or would they prefer to have the client updated for them e.g. overnight so they can immediately start to work?
Best regards
Jan
Edited by: Jan Ruzarovsky on Sep 29, 2010 9:37 AM

How to Integrate SAP Business One to R/3

Hi guys,
I have one client, this client is having the one head office and two branch offices. in the Head Office SAP R/3 is implemented
Now the Client wants to implement SAP Business One in the branches. and want to integrate SAP Business One to R/3.
i.e; if in the branch office creates Purchase Order then Automatically should create the Sales Order in SAP R/3.
This is the one Scenario. their are lot of scenario's.
Thanks in advance.

Shiva,
Apologies as I am not sure what the question is. If your question is can you integrate SAP Business One with R/3 ... then yes using the SAP Business One Integration for SAP NetWeaver or B1i. You can find more detailed information on B1i on SDN here ...
SAP Business One Integration for SAP NetWeaver (B1iSN) [original link is broken]
HTH,
Eddy

Print layout design - AR invoice - SAP business one 2005B

I designed AR invoiced in this,
1. I have invoiced for one line item,But in print preview the 1st Lineitem get repeated 2 times,Since i fetched taxes like Excise duty,cess & Sales tax in repetetive area ?
2. I fetched taxes like Excise duty,Cess,Sales tax directly from table(INV4),
How i can display Excise duty amount in words?
3. I know the table for customer TNGST & CST #
Which is CRD7,how to fetch the data's with reference to AR Invoice number?
Kindly advise me.
Jeyakanthan

Jeyakanthan,
You have posted your question in the SAP Business One Integration Technology forum. Your question seems to be related to the SAP Business One SDK. You need to post your question in the SAP Business One SDK Discussion Forum.
Thank you,
Eddy

SAP Business One in SAP NetWeaver Portal?

Hi,
We have a customer that will implement SAP Business One for their backoffice.
They want a package solution for their internet and extranet (clients and suppliers). The extranet will access SAP Business One.
We are considering to implement SAP NetWeaver Portal for the extranet.
Do you think this is possible? What about SSO?
Tahnk you all,
Olivier Marques.

Olivier,
I am not sure about the SAP NetWeaver Portal. You may want to ask that question in the NetWeaver Discussion Forum.
With respect to the SAP Business One Integration for SAP NetWeaver product ... this technology is not providing a portal in which to access SAP Business One from a web interface. The SAP Business One Integration for SAP NetWeaver is a technology that seamlessly integrates SAP Business One with mySAP with respect to the integration of transactions and master data flow between the two systems from a headquarters/subsidiary(s) standpoint.
HTH,
Eddy

SAP BUSINESS ONE FOR ANDROID

Hi Experts,
Need the procedure for installing the sap business one integration framework for configuring the SAP business one Android app.
Also kindly share the link for downloading the integration framework setup file.
Regards,
Vinoth

If you have done the setup for the ipad or iphone it is the same.
http://scn.sap.com/community/business-one-integration-technology/blog/2012/09/26/ipad-and-iphone-configuration-setting

SAP Business One Integration Services Authentication Failed

Similar Messages

Maybe you are looking for