SAP BW 3.5 with ECC 5.0 Installation Instructions Needed

All BW Experts,
I would like to install the trial version of SAP BW 3.5 and IDES (ECC 5.0) on my Windows 2003 Server. I would really appreciate if anyone can send me the installation instructions to my email id: [email protected] . I will assign maximum points to the email that best helps me make a smooth installation, so please don't forget to include any additional tips/tricks/workarounds I may need to know to avoid common bottlenecks/issues during installation. Appreciate your help in advance.
PS: I am still a SAP student so I do not have access to the SAP Service Marketplace, so please don't ask me to look in there for the instructions.
Thanks
Kumar P.
Added note at bottom in response to the first suggestion.
Message was edited by: Kumar P

Hi Kumar,
You Can dowload The Instalation Documents from
https://websmp107.sap-ag.de/nw04installation
Thanks,
-Vijay

Similar Messages

SAP BW 3.5 w/ ECC 5.0 Installation Instructions

Hi BW Experts!
I would like to install the trial version of SAP BW 3.5 and IDES (ECC 5.0) on my Windows 2003 Server. I would really appreciate if anyone can send me the installation instructions to my email id: [email protected] . I will assign maximum points to the email that best helps me make a smooth installation, so please don't forget to include any additional tips/tricks/workarounds I may need to know to avoid common bottlenecks/issues during installation.
Appreciate your help in advance.
PS: I am still a SAP student so I do not have access to the SAP Service Marketplace, so please don't ask me to look in there for the instructions as I don't have access to it.
Thanks
Kumar P.

Are there any issues/drawbacks with this combination?
What are the exceptions to this?
Thanks in advance,
-Reji Thomas.

SAP SRM 7.0 with ECC EHP 4 components to execute scenario

Hi All,
I am new to SAP SRM 7.0.Could you please let me know that what are all the components needs to be in place to execute the technical scenarios and business scenarios.I had an hands on experience on SAP SRM 5.0 with ECC 6.0 backend.
Some where i read that there are lot of configuration changes when we integrate SRM 7 with ECC EHP 4.Do we need to have PI 7 for executing Centralized contract and plan driven procurement scenario?Please guide me to have some exposure towards higher version.Thank you in advance.
Best Regards,
praveen

Hello,
You can refer the INSTALLATION AND UPGRADE INFORMATION , Master guides etc maintained at the below mentioned location which will answer all your query's here.
Goto URL http://service.sap.com/srm-inst and then navigate to SAP SRM --> SAP SRM Server 7.0 .
Best Regards,
Rahul

SAP Cloud For Customer With ECC Integration Material Replication Content Error

Hi Experts,
When i replicate the Material from ECC to Cloud With Sale Org Data if getting error as shown below.
When we are replicate the Material without Sales Org Data its working but when we pass the data with Sales Org it gives error .
Errors reported by application: "Activation not permitted; cross-process category missing", "Error while processing inbound third party communication"
and the Payload for this error attached in the file
Kindly anyone have idea about this error share your inputs.
Many Thanks
Mithun

Hello Mithun,
The reason for this error is in the definition of the Material in the Cloud:
For the Sales data it is required that a product category is assigned to the Material.
This product category must belong to a product category hierarch with the category code "Cross-Process".
This is not required for the basic data i.e. without the Sales data.
Therefore you can transfer the Material data w/o Sales data and no error occurs.
HTH,
Horst

Is there any link with SAP IS-distribution management with RE_FX

Hi All,
My client is using SAP IS-Distribution management with Ecc 6.0 .How ever classic real estate and RE sales appears in the system under accounting part.
Is it possible to use flexible real estate managament in this scenario.
Client is looking for Flexible Real Estate Managment .
If it is please give me some inputs.
Regards,
Mohan

Hi I have solved my issue ..
Mohan

SAP XI 2 BI Integration with ECC 6.0

Dear all,
we are planning to do XI integration between ECC 6.0 to BI
1) How to Get the BI Standard data from ECC 6.0?
2)We are planning to integrate Standard BI reports with ECC 6 0 through XI.
Please sugget the scenario for integration between ECC 6.0 to BI through SAP XI.
Thanks In Advance.
Mahesh

Hi Mahesh,
Please go thru these links
To push data from BW to XI, please check
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/g-i/how%20to%20push%20data%20into%20bw%20from%20xi.pdf
To send data from XI to BW please check
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/g-i/integrate%20bw%20via%20xi.pdf
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40574601-ec97-2910-3cba-a0fdc10f4dce
XI-BI Integration unsing RFC
Pushing data from BI to XI using RFC Adapter
https://forums.sdn.sap.com/click.jspa?searchID=17734474&messageID=5878682
Thanks,
Shweta

How to integrate SAP TM8.0 with ECC 6.0

Hi Experts,
Could any one please suggest is there configuration/integration document available to integrate TM8.0 with ECC 6.0 using PI 7.1.
I haven't found any documentation as of now. If there is no document ready can someone suggest what is the approach in the integration and configuration to be done in ECC 6.0, PI 7.1 and TM8.0.
We have TM8.0 installed and content is available in PI 7.1.
Thanks,
Chinna

please confirm, i am no XI expert
In you integration directory.
Create a configuration scenario for this integration scenario Invoiceintegration
Follow steps in the link
http://help.sap.com/saphelp_erp2004/helpdata/EN/c4/b9863f365e4117e10000000a114084/frameset.htm
From the menu open the integration configurator. it open the integration scenario . then you have assign business system etc.
then finally generate.

SAP Lumira 1.17 Connectivity with ECC 6 giving error

Hi Expert,
We're on SAP Lumira 1.17 and I'm getting attached error when I'm connecting with EC 6 via Query with SQL. I've attached the error log. Can you someone please look into this , how can I resolve this error to connect with ECC.
I'm trying

Hi Antoine,
Thanks for response.
Are you able to connect to this ECC system using either:
- a SAP tool like SAP logon
Yes, I can.
- a BI tool like information design tool (if you have access to it)
Yes, I can access. I can also connect UNX universe which is built on ECC with Webi as well. It's only in Lumira which is not working.
-Can you try from SAP Lumira changing the language used?
Yes, I tried to change different language (US and UK both) but not working.
-As the base error from your log file raised from ECC is
This error log is generated from Lumira only.
Thanks,
Pawan

Upgrade from SAP 4.7 EE to ECC 6 while working with CRM 4.0

Hi All,
Presently we are using R/3 version 4.7 EE with CRM 4.0 and now we are planning to upgrade R/3 4.7 to ECC.6.0. My question is, are there any problems working on CRM 4.0 with ECC 6.0 and what are the limitation we face when we work on CRM 4.0 with ECC 6.0 ?. Please provide some inputs on this ASAP.
Thanks in advance,
J M.

Hi,
There is no problem to work on CRM 4.0 with ECC 6.0.
I am using from long time CRM 4.0 with ECC6.0
BR,
Darshan..

How is the integration with ECC in SRM 7.0??

Hi,
Working with SRM 5.0 or 5.5 the use of XI for integration with ECC is not mandatory because when we send any document from ECC to SRM like requisitions (to convert them in shopping cards) or when we send any document from SRM to ECC like shopping cards, PO´s, contracts, we only use the RFC´s and the abap programs.
Is the same behavior with SRM 7.0?????
Could the integration from SRM 7 with ECC 6 work with RFC´S without XI or for this vertions is XI mandatory?????
Thanks

SRM70 is closely integrated with XI for transferring docs between ECC and SRM. SAP introduces eSOA tech nology with SRM70 and hence all documents like PR from ECC to SRM, Central Contract from SRM to ECC, PO creation (Classic), etc uses this techn ology.
Thanks,
Jagadish

Install SAP ERP 6.0 with EHP7 - Inst Master ???

Hi All,
I've downloaded all necessary files need for EHP7 FOR SAP ERP 6.0 IDES Version.
The downloaded files are listed below.
NW 7.0 Presentation - 7.30 Compilation 3
NW 7.0 Presentation - Adobe LiveCycle Designer 9.0
RDBMS MSSQLSRV 2012 SP01 CU7 1/8
RDBMS MSSQLSRV 2012 SP01 CU7 2/8
RDBMS MSSQLSRV 2012 SP01 CU7 3/8
RDBMS MSSQLSRV 2012 SP01 CU7 4/8
RDBMS MSSQLSRV 2012 SP01 CU7 5/8
RDBMS MSSQLSRV 2012 SP01 CU7 6/8
RDBMS MSSQLSRV 2012 SP01 CU7 7/8
RDBMS MSSQLSRV 2012 SP01 CU7 8/8
SAP Kernel 7.41 Windows Server on x64 64bit
IDES SAP ERP 6.0 EHP7 Inst. Export 1/14
IDES SAP ERP 6.0 EHP7 Inst. Export 2/14
IDES SAP ERP 6.0 EHP7 Inst. Export 3/14
IDES SAP ERP 6.0 EHP7 Inst. Export 4/14
IDES SAP ERP 6.0 EHP7 Inst. Export 5/14
IDES SAP ERP 6.0 EHP7 Inst. Export 6/14
IDES SAP ERP 6.0 EHP7 Inst. Export 7/14
IDES SAP ERP 6.0 EHP7 Inst. Export 8/14
IDES SAP ERP 6.0 EHP7 Inst. Export 9/14
IDES SAP ERP 6.0 EHP7 Inst. Export 10/14
IDES SAP ERP 6.0 EHP7 Inst. Export 11/14
IDES SAP ERP 6.0 EHP7 Inst. Export 12/14
IDES SAP ERP 6.0 EHP7 Inst. Export 13/14
IDES SAP ERP 6.0 EHP7 Inst. Export 14/14
I don't find Inst.Master which is required to start up the installation. Where to download it and what specific version I need to download for EHP7 for SAP ERP 6.0 IDES ?
Are there any JAVA COMPONENTS that I need to download before starting installation like Java Component BS2005SR3 or Java Component NW 7.0 SR3 ?? and SAP ERP 6.0 SR3 Components for EHP3 do we have similar components for EHP7 ?
Can anyone tell me what type of collation I need to select when installing the MSSQL Server 2012 and which Operating system is best suitable for SAP IDES 6.0 with EHP7 on MSSQL Server 2012 ?
I have JAVA from Oracle version 1.4.2 and policy file or whcih version of JAVA is suitable for installation ? Is it possible to do the install with latest JRE available ?
Will appreciate rewards for best support.
Regards,
Gowri Shankar

Hi Tomas,
Good day, as per you advice. I manage to go thru the IDES installation but its stuck on 19 of 34 (Import ABAP) with error code 2.
Below are the text written in ECC Message Box.
An error occurred while processing option SAP Business Suite 7i 2013 Support Release 1 > EHP7 for SAP ERP 6.0 ABAP Support Release 1 > Oracle > SAP Systems > Application Server ABAP > Standard System > Standard System( Last error reported by the step: Process call 'D:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe -testconnect' exits with error code 2. For details see log file(s) R3load.exe.log.). You can now:
Choose Retry
to repeat the current step.
Choose Log Files
to get more information about the error.
Stop the option and continue later.
Log files are written to C:\Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP.
Below are the logs from R3load.exe:-
sapparam: sapargv(argc, argv) has not been called!
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
D:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20141006062234
D:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/741_REL/src/R3ld/R3load/R3ldmain.c#6 $ SAP
D:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe: version R7.40/V1.8 [UNICODE]
Compiled Nov 23 2013 13:31:32
-------------------- Start of patch information ------------------------
patchinfo (patches.h): (0.009) Support for SUM/ZDM and DMO (note 1778564)
DBSL patchinfo (patches.h): (0.011) DBSL error corrections in 7.41: (4) LOBs (note 1928526)
--------------------- End of patch information -------------------------
process id 4612
DbSl Trace: Connect via SAPUSER not supported for kernel >= 740.
(DB) ERROR: db_connect rc = 256
DbSl Trace: Connect via SAPUSER not supported for kernel >= 740.
(DB) ERROR: DbSlErrorMsg rc = 29
D:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
D:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20141006062234
I've created new thread for this issue at Error in SAP installation in phase 19 of 34 - Import ABAP
Looking forward for your reply.
Regards,
Jay
-96-
Message was edited by: Jay Jay

RFC & Excel VBA with ECC 6.0

I use a routine like this to post movements in R/3 (This is an example for MB1A Transaction) based on information posted on a excel spreadsheet + VBA and seudo-code created with SM35 transaction
Public Sub updateRFC_BDC()
'Set sheet specific variables / constants
j = 0
startRow = 3
colStatus = 1
colMsg = 1
' Cell information on the excel spreadsheet
colMKPF_BLDAT = 2
colMKPF_BUDAT = 3
colMKPF_OIB_BLTIME = 4
colRM07M_BWARTWA = 5
colRM07M_WERKS = 6
colRM07M_LGORT = 7
colXFULL = 8
colRM07M_WVERS3 = 9
colMSEG_MATNR = 10
colMSEG_ERFMG = 11
colMSEG_ERFME = 12
colMSEG_WERKS = 13
colMSEG_LGORT = 14
colMSEG_CHARG = 15
colMSEG_OIHANTYP = 16
colOIB_A08_TDICH = 17
colOIB_A08_TDICHEH = 18
colOIB_A08_MTTMP = 19
colOIB_A08_MTTEH = 20
colOIB_A08_TSTMP = 21
colOIB_A08_TSTEH = 22
colOIB_A08_MCF = 23
colDKACB_FMORE = 24
colCOBL_PRCTR = 25
i = 0
'Set debug mode
If CheckBox1.Value = True Then
   DEBUG_MODE = True
Else
   DEBUG_MODE = False
End If
'Reset status column
Range(Cells(startRow, colMsg), Cells(60000, colMsg)).Value = ""
'Login to SAP, if it fails, notify user and exit sub
updateStatus "Logging into SAP...", colStatus, 1
If Not login2SAP Then
   MsgBox "Login to SAP failed. Remote Function Call NOT performed.", vbInformation, "Login Failed"
   updateStatus "", colStatus, 1
   Exit Sub
End If
'While the next row is not empty loop through BDC
While Trim(Cells(startRow + i, 2).Value) <> ""
   firstTime = True
   updateStatus "Processing Row " & (startRow + i), colStatus, 1
   ' Retrieve the Function object (the Connection object must be set up before Function objects can be created):
   Set RfcCallTransaction = Functions.Add("RFC_CALL_TRANSACTION")
   'Set the export parameters
   RfcCallTransaction.exports("TRANCODE") = "MB1A                                                                                "
   RfcCallTransaction.exports("UPDMODE") = "S"
   Set BdcTable = RfcCallTransaction.Tables("BDCTABLE")
   'Highlight current row so user knows what is happening
   Cells(startRow + i, 2).Select
   'Screen SAPMM07M BDC code
   add_BDCData BdcTable, "SAPMM07M", "0400", "X", "", ""
   add_BDCData BdcTable, "", "", "", "BDC_CURSOR", "RM07M-LGORT"
   testForBlank_AddToBDC "MKPF-BLDAT", Cells(startRow + i, colMKPF_BLDAT).Value
   testForBlank_AddToBDC "MKPF-BUDAT", Cells(startRow + i, colMKPF_BUDAT).Value
   testForBlank_AddToBDC "MKPF-OIB_BLTIME", Cells(startRow + i, colMKPF_OIB_BLTIME).Value
   testForBlank_AddToBDC "RM07M-BWARTWA", Cells(startRow + i, colRM07M_BWARTWA).Value
   testForBlank_AddToBDC "RM07M-WERKS", Cells(startRow + i, colRM07M_WERKS).Value
   testForBlank_AddToBDC "RM07M-LGORT", Cells(startRow + i, colRM07M_LGORT).Value
   testForBlank_AddToBDC "XFULL", Cells(startRow + i, colXFULL).Value
   testForBlank_AddToBDC "RM07M-WVERS3", Cells(startRow + i, colRM07M_WVERS3).Value
   add_BDCData BdcTable, "", "", "", "BDC_OKCODE", "=NPE"
   'Screen SAPMM07M BDC code
   add_BDCData BdcTable, "SAPMM07M", "0410", "X", "", ""
   add_BDCData BdcTable, "", "", "", "BDC_CURSOR", "MSEG-OIHANTYP"
   testForBlank_AddToBDC "MSEG-MATNR", Cells(startRow + i, colMSEG_MATNR).Value
   testForBlank_AddToBDC "MSEG-ERFMG", Cells(startRow + i, colMSEG_ERFMG).Value
   testForBlank_AddToBDC "MSEG-ERFME", Cells(startRow + i, colMSEG_ERFME).Value
   testForBlank_AddToBDC "MSEG-WERKS", Cells(startRow + i, colMSEG_WERKS).Value
   testForBlank_AddToBDC "MSEG-LGORT", Cells(startRow + i, colMSEG_LGORT).Value
   testForBlank_AddToBDC "MSEG-CHARG", Cells(startRow + i, colMSEG_CHARG).Value
   testForBlank_AddToBDC "MSEG-OIHANTYP", Cells(startRow + i, colMSEG_OIHANTYP).Value
   add_BDCData BdcTable, "", "", "", "BDC_SUBSCR", "SAPMM07M                                2400BLOCK1"
   add_BDCData BdcTable, "", "", "", "BDC_SUBSCR", "SAPMM07M                                2400BLOCK2"
   add_BDCData BdcTable, "", "", "", "BDC_OKCODE", "/00"
   'Screen SAPLOIB_QCI BDC code
   add_BDCData BdcTable, "SAPLOIB_QCI", "0500", "X", "", ""
   add_BDCData BdcTable, "", "", "", "BDC_CURSOR", "OIB_A08-TDICH"
   testForBlank_AddToBDC "OIB_A08-TDICH", Cells(startRow + i, colOIB_A08_TDICH).Value
   testForBlank_AddToBDC "OIB_A08-TDICHEH", Cells(startRow + i, colOIB_A08_TDICHEH).Value
   testForBlank_AddToBDC "OIB_A08-MTTMP", Cells(startRow + i, colOIB_A08_MTTMP).Value
   testForBlank_AddToBDC "OIB_A08-MTTEH", Cells(startRow + i, colOIB_A08_MTTEH).Value
   testForBlank_AddToBDC "OIB_A08-TSTMP", Cells(startRow + i, colOIB_A08_TSTMP).Value
   testForBlank_AddToBDC "OIB_A08-TSTEH", Cells(startRow + i, colOIB_A08_TSTEH).Value
   testForBlank_AddToBDC "OIB_A08-MCF", Cells(startRow + i, colOIB_A08_MCF).Value
   add_BDCData BdcTable, "", "", "", "BDC_OKCODE", "=CONT"
   'Screen SAPMM07M BDC code
   add_BDCData BdcTable, "SAPMM07M", "0410", "X", "", ""
   add_BDCData BdcTable, "", "", "", "BDC_SUBSCR", "SAPLKACB                                0001BLOCK"
   testForBlank_AddToBDC "DKACB-FMORE", Cells(startRow + i, colDKACB_FMORE).Value
   'Screen SAPLKACB BDC code
   add_BDCData BdcTable, "SAPLKACB", "0002", "X", "", ""
   add_BDCData BdcTable, "", "", "", "BDC_CURSOR", "COBL-AUFNR"
   testForBlank_AddToBDC "COBL-PRCTR", Cells(startRow + i, colCOBL_PRCTR).Value
   add_BDCData BdcTable, "", "", "", "BDC_SUBSCR", "SAPLKACB                                9999BLOCK1"
   add_BDCData BdcTable, "", "", "", "BDC_OKCODE", "=ENTE"
   'Screen SAPMM07M BDC code
   add_BDCData BdcTable, "SAPMM07M", "0410", "X", "", ""
   add_BDCData BdcTable, "", "", "", "BDC_CURSOR", "MSEG-ERFMG"
   testForBlank_AddToBDC "MSEG-ERFMG", Cells(startRow + i, colMSEG_ERFMG).Value
   add_BDCData BdcTable, "", "", "", "BDC_SUBSCR", "SAPMM07M                                2400BLOCK1"
   add_BDCData BdcTable, "", "", "", "BDC_SUBSCR", "SAPMM07M                                2400BLOCK2"
   add_BDCData BdcTable, "", "", "", "BDC_SUBSCR", "SAPLKACB                                0001BLOCK"
   testForBlank_AddToBDC "DKACB-FMORE", Cells(startRow + i, colDKACB_FMORE).Value
   add_BDCData BdcTable, "", "", "", "BDC_OKCODE", "=BU"
   'Screen SAPLKACB BDC code
   add_BDCData BdcTable, "SAPLKACB", "0002", "X", "", ""
   add_BDCData BdcTable, "", "", "", "BDC_CURSOR", "COBL-AUFNR"
   testForBlank_AddToBDC "COBL-PRCTR", Cells(startRow + i, colCOBL_PRCTR).Value
   add_BDCData BdcTable, "", "", "", "BDC_SUBSCR", "SAPLKACB                                9999BLOCK1"
   add_BDCData BdcTable, "", "", "", "BDC_OKCODE", "=ENTE"
   add_BDCData BdcTable, "TCDEMB1A                                                                                ", "", "", "", ""
   firstTime = False
   ' Call the function (if the result is false, then display a message):
   If RfcCallTransaction.CALL = True Then
       Set Messages = RfcCallTransaction.imports("MESSG")
       If DEBUG_MODE Then
           printBDCTable (startRow + i)
       End If
       Cells(startRow + i, colMsg).Value = Messages.Value("MSGTX")
   Else
       MsgBox " Call Failed! error: " + RfcCallTransaction.Exception
       updateStatus "Error!", colStatus, 1
   End If
   i = i + 1
   j = 0
   Messages.Value("MSGTX") = ""
Wend
logOffSAP
If DEBUG_MODE Then
    MsgBox "BDC file written to : " & DEBUG_FILE
End If
updateStatus "Processing Done. Logged off of SAP", colStatus, 1
End Sub
Now I'm trying to use this routine for ECC 6.0, but it looks like the export parameter changed and it is not working.
Could you please help me to debug this routine to make it work with ECC 6.0
Thanks

Dear Javier Cantini,
Welcome to SCN.
Post your queries in relevant forum. Your query is technical in nature and should be posted in ABAP forums. Moving your thread to ABAP, General forum.
Regards,
Naveen

List of modules with ECC 6.0

I am looking for information on different module and engine in SAP from licensing perspective , like Netweaver comes wih ECC 6.0. What about Open Hub ? Can anyone kindly provide list of module and what comes with what and how it is set up?

Licensing is what your contract states. Just because Netweaver comes with ECC 6.0 that does not mean you are licensed to use netweaver components like enterprise portal, MDM, BI etc. ECC 6.0 requires only web application server to run and perhaps other basis components, but other pieces of Netweaver are not automatically available to you. Look at something like this to help you with modules of SAP ECC 6 http://help.sap.com/saphelp_erp60_sp/helpdata/en/80/ea89395eb58c4f9d0c3e837cf0909d/frameset.htm
Click on logistics and modules are listed
Mike

Reconcile Inventory BI Content Queries with ECC

Hi Folks,
I have a question regarding reconciling Inventory Management BI Content reports based on cube 0IC_C03 with ECC.
We implemented IM in BI, and now try to reconcile the queries with ECC. Specifically, I have one query, 0IC_C03_Q0008 - Stock in Transit.
We ran the report by Plant, in BI, it only showed one material with #, but people from ECC side use T-Code MB5T in ECC and saw many materials with Stock in Transit for that Plant; and for the material showed on BI report, the # doesn't match between BI and ECC.
What is the right way to reconcile the report with ECC? is there any other report/Tcode in ECC we can use?
Any insight ideas would be much appreciated!
Thanks,
Freda

Hi Freda,
For me, it is the typical nightmare to try to reconcile the cube to your ECC transactions since the cube summarizes and doesn't include your material documents.
So, to make it a bit easier to match MB5T or MB51, add an ODS with a material document and Material item key and all of the fields and key figures necessary for reconciliation (I usually look at the datasource's delivered fields and add whatever sounds reasonable to look at). To fill records in this ODS, only fill them from 2LIS_03_BF, because BX and UM do not contain material documents.
While I was writting this, I think I realize what is happening in your situation. If memory serves me correctly, MB5T is Cross-Company SIT, which is not part of the 2LIS_03* datasources. They only account for Intra-Company (Plant-to-Plant within the same company code) SIT. For that, there is a White Paper you can have an ABAP'er implement for you.
Here are two good documents you should read and be familiar with:
How to .... Report on Cross Company Stock in Transit: https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/92c0aa90-0201-0010-17b1-bf5b11c71257
How to .... Handle Inventory Management Scenarios in BW: https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
Also, when comparing my cube data to ECC/R/3, I use transaction MMBE in the ECC to identify stock quantities and stock in transit (SIT).
Brian

New Extractors GL with ECC 6.0

All,
Currently we have ECC 5.0 system and we have 0FI_GL_10 extractor providing us the reports based on P&L and Balance Sheet. The major issue with it is that it brings in 51 times the number of records because we have 16 periods and 3 currencies.
We are planning on upgrading ECC system in near future. We want to have our GL base reports coming out of the new extractors. I have heard that the new extractors make it much better with ECC 6.0. We have our blance sheet and Detailed P&L reports coming out of current extractor.
Can anyone who has implemented new extractor help on explaining which new extractor can best replace this functionality?
Thanks in advance.

Hi,
Go through the links
http://help.sap.com/saphelp_nw70/helpdata/en/e2/f16940c3c7bf49e10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_erp60_sp/helpdata/en/29/830e405c538f5ce10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/e6/f16940c3c7bf49e10000000a1550b0/frameset.htm
Re: New GL cubes 0FIGL_V10, 0FIGL_V11
Note 1070629 - FAQs: New General Ledger Migration
Cost Elements:Cost Element ( KSTAR ) should be available in the extract structure ( FAGL_EXTSTRUCT_LEAD ) of 0FI_GL_10.Append the structure to get cost element, activate , uncheck the hidden tab.
Features of the Extractor
Extraction method: F1 (function module (complete interface))
Extractor: FAGL_GET_TT_DATA_LEAD
Extraction structure: FAGL_EXTSTRUCT_LEAD
If you include your own fields in the totals table of the new General Ledger using transaction FAGL_GINS, these fields are not included in the extraction automatically. You first have to include them under the same name in an APPEND to extraction structure FAGL_EXTSTRUCT_LEAD. The fields of the APPEND structure are then filled automatically.
Santosh

SAP BW 3.5 with ECC 5.0 Installation Instructions Needed

Similar Messages

Maybe you are looking for