SAP BW system ID for DEV, QUALITY and PROD

Hi experts,
     I have a scenario where I require automatically, the BW system that I have currently logged on, depending on the system my data resides in.
That is, if I am in the Development system, it should be DEVCLNT123, if Quality it should be QACLNT123, and if Production, it should be PRODCLNT123.
Is there any way this can be achieved across the 3 systems in the BW landscape, generically? If so, how can it be done?
Thanks in advance.

Please be clear while you frame your questions if you expect us to advice :
where I require automatically, the BW system that I have currently logged on, depending on the system my data resides in ??? doesnt make any sense to me
Cheers !
Suyash

Similar Messages

  • In SAP BW landscape we should have separate servers for DEV, QA and PROD

    Hi all,
    In SAP BW system landscape we should have separate servers for DEV, QA and PROD.
    whether one server is enough for DEV and we can use virtual servers to QA & PROD?
    Regards,
    chandu

    Hi chandu,
    In my previous Organisation we got exactly the same landscape for BW as you described.BCS(BAYER COPSCIENCE LTD) operates a BW System Landscape with one centralized  Global Development System and three regional Quality Assurance and Production Systems located in Europe, Asia Pacific and Americas. This Landscape is to ensure consistent data models to be available in all regional systems as well as to minimize development efforts and make use of respective synergies.
    This is perfectly working  for BCS ,and I think, this is the most approriate way of handling of resources.
    Regards
    CSM Reddy

  • One PI system for Dev, QA and Prod..possible?

    Hello Experts,
    I have been told that there will be just one PI system, for development and the same has to be used as QA in IST and for Production...
    I have 4 scenarios , 2 are JDBC to Proxy and 2 are file to proxy..
    Hence, I have to connect to ECC as well for the proxy...
    Is it possible????
    please put  forth ur views on this...
    Regards,
    Teja

    Hi Guys,
    Thank you for ur reply
    I believe this is a temp solution before the real hardware arrives...
    Hence, dev can be ready by then  but the point is that ther is ERP for dev, ERp for QA and ERP for Prod...
    How can i connect the same Pi system to three different erp s??
    as all scenarios have proxy...
    Can u pls throw light on this?
    Regards,
    Teja
    Edited by: Ravindra Teja on Sep 29, 2009 7:42 AM

  • STMS Route configuration in Three system Landscape with DEV,QA and PRD

    Hi
    We have Three system landscape.i.e DEV,Quality and PRD
    Before Somebody  configured the STMS by selecting standard two system land scape ( Dev and QAS)
    We Have Installed Production Server And Added into Existing STMS Configuration
    Now Three Systems Showing, In Import Overviw Screen
    How Can I Create Route Between Three systems
    What I am Asking Is Without Delet Old Roots
    Can i Create it are Not
    regards
    NSN

    Refer these links:
    http://help.sap.com/saphelp_erp2005/helpdata/en/1c/2ddc0901db11d284870000e8a57770/frameset.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/44/b4a0137acc11d1899e0000e829fbbd/frameset.htm
    Regards,
    Ravi

  • Making system settings for measurement documents and measuring point

    What is the significance of making system settings for measurement documents and measuring point in spro?
    Edited by: Pallavi Kakoti on Jul 14, 2011 1:23 PM

    Hi,
    << Moderator message - Cut and paste response from http://www.consolut.com/en/s/sap-ides-access/d/s/doc/YY-OLI0IMRCCUST removed. Plagiarism is not allowed in SCN >>
    Regrds
    Jitender
    Edited by: Rob Burbank on Jun 6, 2011 10:53 AM

  • Do we have a list of SAP certified system integrators for HANA Enterprise Cloud

    I am in a sales cycle and SAP services estimated price for implementation is to expensive and we are pitching HEC.  Do we have a list of SAP certified system integrators for HANA Enterprise Cloud for ERP (Finance and Merchandising for Retail)?

    Yeah, not sure why they took it out of the cloud interface.
    But if you go to http://www.businesscatalyst.com/partnerportal and login with your cloud ID you will have access to all your cloud sites and many other features.

  • What's the best iTunes import setting for highest quality and universality?

    What's the best iTunes import setting for highest quality and universality?

    Highest quality?
    Apple Lossless. (But the files are way big)
    Universality?
    MP3 (choose the bit rate you think sounds best and doesn't take too much space)

  • SAP's Customer Network for R&D and Engineering

    Just want to make the PPM folks aware that SAP started the "Customer Network for R&D and Engineering".
    See also this post in the [PLM Forum|SAP's Customer Network for R&D and Engineering;.If you are interested  to participate in the Network, just drop me a mail with your contact details.
    Regards Renato

    Dear Phillip,
    Cloud enabled software can be easily deployed on-premises but not vice versa.
    this could probably be the deciding factory, for every customer : - )
    no one would want to block their future...
    so even for on-premise, its better to start with cloud and go for hybrid model and i believe
    if this lock is there.....
    then every on-premise solutions will have a cloud solution.....  
    want to see your argument on, any one thinking, i want only on-premise, and i will not be needing
    cloud solutions in near future..... also for hybrid customers, cloud first and then on-premise would be pain area.

  • How to transport a query created in system development to quality and prod?

    Hi All,
    I'd like to know ow to transport a query created in system development to quality and prod?
    Thanks

    Hi,
    Queries are not saved under any transport request.
    We would have to go to transaction sq02 and click on the 'Transport' button ( with truck icon).
    In the screen specify your query name, infoset name, and usergroup name and select the option 'Download'.
    Save the downloaded file on your desktop.
    In your quality or production system, go to SQ02 and click on teh same button,
    select 'Upload' and specify the name of the query, infoset and usergroup which you want to upload.
    Select the downloaded file.
    Select the option 'Overwritting allowed' as applicable.
    Thanks,
    Harini

  • Transporting a query created in system development to quality and prod ...

    Hi All,
    I'd like to know how to transport a query created in system development to quality and prod?
    Thanks

    From the menu on top in SQVI or SQ01 transactions, choose Query -> More functions -> Generate program.  Then choose Query -> More functions -> Display report name.  This report is an ABAP report (just like any other ABAP program).  Please check with an ABAPer if this report can be pushed into a Workbench Transport request, so you could then move it to QA and Prod.

  • When I add pictures into MUSE , do the pictures resize for web quality (And so the page loads fast enough) or do I have to do this using an external software like photoshop, etc. ? Thank You

    When I add pictures into MUSE , do the pictures resize for web quality (And so the page loads fast enough) or do I have to do this using an external software like photoshop, etc. ?
    Also is there any way I can change the contact form email for all of my contact forms at once.
    I have over 100 contact forms and i want to make them reach the same email anyway I can do that without going one by one?

    If you have placed the image in Muse using File > Place and then scaled the image down in Muse while editing, then Muse publishes/exports the scaled down/optimized image in final output. When using as a Fill, the output size depends on the Fitting option you setup in the Fill options.
    As for the contact form email, you would need to specify the email address for each form individually. There is no workflow to edit the same for multiple forms at a time.
    Cheers,
    Vikas

  • Redeeming credit for iTunes store from gift card. system asking for security code and gift card thrown away.

    Redeeming credit from gift card for itunes. System asking for securitity code and gift card is thrown away.

    On the main iTunes store screen, click on Redeem on the right side.
    Put in the card number.
    It will ask to *Create new account* or *Use existing account*.
    If you do not have an account, select *Create new account*.
    You don't have to enter in a CC number. You cna if you want but it's not required.

  • Query Comparison in DEV, QA and PROD

    Hi,
    Is there any way to compare the queries in DEV, QA and PROD to make sure that all the boxes have all the queries (provided we have followed the system landscape like transporting from DEV to all other two).
    If not (this is happenning most of the time, because users are creating queries directly in PROD), we have to compare each and every query against the particular Data target in all the three environment. 
    We want to have a control in such a way that all queries are only created in DEV by the users and we will transport to QA and PROD. Once after making sync between landscape, we will restrict the access to the users to create directly in PROD.
    Please help urgently.
    Thanks,
    David

    Hi,
    Use S_RS_COMP and S_RS_COMP1 for BEx security and specifically for Query use S_QUERY.
    Cheers,
    Kedar
    Message was edited by: Kedar Patil

  • How to set up DEV, TEST and PROD environment?

    We have used BI publisher Enterprise (standalone), Oracle BI Publisher 10.1.3.4.1. Our admin set up DEV, TEST and PROD environment based on the folder. For example, there is DEV folder, TEST folder and PROD folder. Developer is developing reports under DEV folder. Under TEST and PROD folder, there are many sub-folder based on the login user role. Sometimes a report has to be assigned to a multiple sub-folder under PROD. So our admin create symbolic links in the Linux box which BI server is located. That way, if a report is updated, there is no need to update the report in all sub-folder.
    The issue I have is we are not allowed to touch any files under TEST/PROD folder. Only admin will move the report from DEV folder to TEST/PROD folder because those links admin created might be broken. However, as a developer, we still have permission to delete/rename/copy report under those restricted folders. Yesterday one report under PROD has been renamed by a developer. And admin complains because the links he has created not working anymore. Just wonder if admin doesn't allow developers to touch the reports under those folders, is there a way to remove the write permission on those folders? Also do you think this is a good practice to set up DEV, TESDT and PROD environment? Any input will be greatly appreciated.

    We have used BI publisher Enterprise (standalone), Oracle BI Publisher 10.1.3.4.1. Our admin set up DEV, TEST and PROD environment based on the folder. For example, there is DEV folder, TEST folder and PROD folder. Developer is developing reports under DEV folder. Under TEST and PROD folder, there are many sub-folder based on the login user role. Sometimes a report has to be assigned to a multiple sub-folder under PROD. So our admin create symbolic links in the Linux box which BI server is located. That way, if a report is updated, there is no need to update the report in all sub-folder.
    The issue I have is we are not allowed to touch any files under TEST/PROD folder. Only admin will move the report from DEV folder to TEST/PROD folder because those links admin created might be broken. However, as a developer, we still have permission to delete/rename/copy report under those restricted folders. Yesterday one report under PROD has been renamed by a developer. And admin complains because the links he has created not working anymore. Just wonder if admin doesn't allow developers to touch the reports under those folders, is there a way to remove the write permission on those folders? Also do you think this is a good practice to set up DEV, TESDT and PROD environment? Any input will be greatly appreciated.

  • OWB10gR2 : One Repository and Multiple Enviroments(Dev , QA and Prod)

    Hi All,
    In 10gR1 , Runtime repository and Design repository used to be 2 different schemas. Because of this , we can simply have one repository in development and deploy the mappings into QA and Prod.
    In R2 , runtime and design objects are present in a single repository. Do we need to install separate repository for each of the environments(Dev, QA and Prod) or is there a way to manage multiple envs without multiple repositories?
    Thanks in Advance
    Mallee

    Hello Malle,
    We are in a similar situation so our setub looks something like this.
    We have a database which serves the purpose of design repository. Let's call it owbdev.
    We have three target databases (data warehouse). Let's call them whdev, whqa, whprd.
    In the db owbdev we configured an owb user (as owner of the repository) and various other users (as developers).
    In whdev, whqa and whprd we did the same configuration except this time, we called the repository owner in each of these target databases, owbrun. This will be what we call in R2 our control center.
    Then we deploy from owbdev to any of the three targets after having setup the appropriate locations and control center configurations in owbdev.
    If there is a better way to do things I'm open to any and all suggestions.
    Mike

Maybe you are looking for