SAP Client to the SAP Server: internal Error (-1102)[Message 131-183]

Hi,
We are using Windows 2008 Server R2, SQL 2008 Standard, SAP B1 8.81 PL08.
When we trying to connect SAP Client to the SAP Server. There has internal Error (-1102) occurred. We can view the database on client, but we always get the same error message after enter the User ID and Password. We have checked the native client and it is installed and also opened the following ports: 1433, 30000, 30001. We have tried to open all of firewall, but itu2019s no use.
When I set a computer in to the engine room and set the network connection, this one can connect SAP Client to the SAP Server.
But when client connect to server by VPN, the IP address will not in the same section. Then We tried to set the IP address has the same network section with the server, but it's still disable.
I set a computer for SAP Server without firewall, complex network, virtual IP and no router in my office. And use a SAP Client which is in different network domain to connect to SAP Server by internet, not VPN, but the SAP Client still canu2019t connect to SAP Server. I get the same internal Error (-1102).
It can not only ping to SAP Server IP, but telnet to the port 1433, 30000, 30001, 445.
When I use a pc with server tools, it can connect to the SAP Server by the localhost license. But if I use a computer only install client and assign the server license. The latter one always got the error.
How could we solve this problem? Is there has another setting I am missing which might be blocking the connection?
Thanks in advance.

Hi,
We are using VPN and using Terminal Licensing or Remote Desktop Conneciton.
The idea here is VPN will connect you to the network and when you are connected to the network
dont use the direct LAN IP connection use the Terminal Licensing to connect.
Again both are needed VPN and Terminal Licensing. VPN for the connection and if successfully connected
use or connect from Terminal Licensing or Remote Desktop connections.
Thanks.
Clint

Similar Messages

Unable to select multiple with holding tax codes. -"This entry already exists in the following tables '' (ACPR) (ODBC -2035) [Message 131-183]"

Unable to select multiple with holding tax codes.
This entry already exists in the following tables '' (ACPR) (ODBC -2035) [Message 131-183]

Hi,
Actually this is an application error in 2007 A and there is no version/PL to fix this issue.
Refer SAP note 1260874 - Cannot add a new BP with ITW tax code
Thanks & Regards,
Nagarajan

Getting Internal Error (-1101) occured (message 131-183) on SAP B1 Journal Entry.

Hi,
Im inputting data on journal entry module on SAP B1 when the message showed up, my computer is running on windows 8. (is it an OS problem?) Is there anyway that i could get rid of this error.
Thanks and Regards,
Christian

Hi Christian,
Please check below link.
https://helpdesk.coresystems.ch/entries/20781833-Internal-error-131-occurred-131-183-FAQ-10062-
SAP B1 client system we got error Internal Erro... | SCN
Internal error (-1101) occurred [Message 131-183]
Internal error (-1101) occured [Message 131-183]
Hope this help
Regards::::
Atul Chakraborty

Com.sap.aii.utilxi.misc.api.UnexpectedException: Internal Error: An unexpec

Hello Friends,
When I want to access message monitoring, I am facing given below error.
com.sap.aii.utilxi.misc.api.UnexpectedException: Internal Error: An unexpected error occurred (java.lang.NullPointerException: null)
Kindly suggest for that.
Regards,
Narendra

Hi Narendra,
Please check if your XI/PI components are in the same SP level.
Generally this error could means that.
For example, if you have PI 7.10.5, all of your XI/PI components
should be 7.10.5, which 5 is the SP level.
Regards,
Caio Cagnani

Deploying SAPUI5 applications on SAP Gateway as the application server

Hi,
We are just trying to ramp up on Fiori architecture and utilizing SAP netweaver gateway in combination with SAPUI5 to build new generation user interfaces.
Most of the demos and tutorials I see involve utilizing the SAP netweaver gateway as the oData services provider with the UI components hosted on a separate web server like Apache. Looking at Fiori apps, it looks like they utilize the SAP gateway as the web server itself, without having the need of a separate web server.
Are there some instructions and guidelines for porting a SAPUI5 UI application (UI components) on to the SAP Netweaver gateway, similar to how Fiori does?
thanks,
Nitin

Hi Neeta,
You would need to consider additional factors to make that decision. Primary of which is what is the landscape being used by your customer. You have to consider things like how the users will access the app? What would be the security and authentication mechanism? Would you need reverse proxies or load balancing? Does the customer already have an existing infrastructure for web based applications which you should plug into?
First off, I will assume you have a NW Gateway system in place for the services that are being used by the SAPUI5 app. If that is the case, then you can certainly deploy the UI app on the same server. The process described in the blog above would end up creating a BSP application, which can then be captured in a transport and moved to QA/Production.
On the other hand, if your customer has already has an existing infrastructure for hosting and serving up Web based applications, you may want to leverage that existing infrastructure instead.
You can get in touch with me if you would like to discuss further.
thanks,
Nitin

SAP ECC to the SAP SNC

Hi Experts,
I have a scenario like SAP ECC TO THE SAP SNC (ASYNC). IN THE SXMB_MONI IT IS SHOWING BLACK FLAG AND IN THE OUTBOUND STATUS IT WAS NOT SHOWING ANY FLAG.
AND ALSO IN ACK STATUS IT WAS SHOWING LIKE ( @8Q\QStill awaiting acknowledgment @) THERE WAS NOT ERROR MESSAGE ALSO .
PLEASE HELP ME TO RESOLVE THIS .

Hi,
> I have a scenario like SAP ECC TO THE SAP SNC (ASYNC). IN THE SXMB_MONI IT IS SHOWING BLACK FLAG AND IN THE OUTBOUND STATUS IT WAS NOT SHOWING ANY FLAG.
For BPM Scenarios it shows the flag in Outbound status but for notmal scenarios it doesn't show.
> AND ALSO IN ACK STATUS IT WAS SHOWING LIKE ( @8Q\QStill awaiting acknowledgment @) THERE WAS NOT ERROR MESSAGE ALSO .
I think it is for Idoc scenario. By default Idoc scenario expects the acknowledgement from receiver (once idoc sends from sender it expects ack message from receiver), if you don't want acks then you have to do below settings.
Go to SE38--> execute "IDX_NOALE" report --> provide sender port and client --> Then you will get some options, here you will select Do not request Acknowledgements.
Regards,
Venkata Ramesh

Outlook is unable to connect to the proxy server. (Error code 0)

Hello,
I have just commenced a Exchange 2007 SP3 to Exchange 2013 SP1 migration following the following guide: http://blogs.technet.com/b/meamcs/archive/2013/07/25/part-1-step-by-step-exchange-2007-to-2013-migration.aspx
As per the above guide, my 2007 environment is now known as legacy.company.com and my 2013, webmail.company.com.
I'm using the same certificate on both boxes and it has the names autodiscover.company.com, webmail.company.com and legacy.company.com. All that seems to be working fine.
OWA is functioning perfectly, hitting https://webmail.company.com will pass the user off to https://legacy.company.com if the mailbox is on 2007. Alongside this, Outlook also has no issues connecting to 2007 mailboxes with the client proxy settings
being reconfigured to https://legacy.company.com automatically.
My problem comes when a mailbox is migrated to 2013. OWA functions fine and presents the mailbox but Outlook is unable to connect, presenting the error:
There is a problem with the proxy server's security certificate.
The name on the security certificate is invalid or does not match the name of the target site webmail.company.com.
Outlook is unable to connect to the proxy server. (Error Code 0)
If I modify the Outlook client's settings and disable "Only connect to proxy servers that have this principal name in their certificate: msstd:webmail.company.com", Outlook connects and functions fine.
I'm at a loss and have tried everything I can think and find on google. Any suggestions would be greatly appreciated.

Hi,
Please refer to the following article :
http://support.microsoft.com/kb/923575
Cause:
This issue may occur if one or more of the following conditions are true:
The connection to the server requires a certification authority (CA).
You have not trusted the certification authority at the root.
The certificate may be invalid or revoked.
The certificate does not match the name of the site.
A third-party add-in is preventing access.
Solution:
To examine the certificate, follow these steps:
In Microsoft Internet Explorer, connect to the RPC server or to the secure server. For example, type
https://www.<var>server_name</var>.com/rpc in the Address bar of the Web browser, and then press ENTER.
Note The <var>server_name</var> placeholder references the RPC server name or the secure server name.
Double-click the padlock icon that is located in the lower-right corner of the Web browser.
Click the Details tab.
Note the information in the following fields:
Valid to
The Valid to field indicates the date until which the certificate is valid.
Subject
The data in the Subject field should match the site name.
Hope this helps!
Thanks.
Niko Cheng
TechNet Community Support

Outlook is unable to connect to the proxy server.(Error Code 10) when users opened Outlook 2010

Hi All
Exchange Server - 2013 CU2 (Windows 2012 Standard)
AD Server - 2003 R2 SP2
exchange-svr01.domain.com - internal name
mail.company.net - external name
When users opened Outlook 2010, they will encountered
"There is a problem with the proxy server's security certificate. The name on the security certificate is invalid or does not match the name of the target site exchange-svr01.domain.com.
Outlook is unable to connect to the proxy server.(Error Code 10)"
I also used the Microsoft Remote Connectivity Analyzer to test RPC/HTTP connectivity.
The RPC/HTTP test completed successfully.
    Validating the certificate name.
    Certificate name validation failed.
     Host name company.net doesn't match any name found on the server certificate CN=AMAZONA-U59HG9G.
Testing SSL mutual authentication with the RPC proxy server.
    The test passed with some warnings encountered.
The certificate common name company.net doesn't match the mutual authentication string provided mail.company.net; however, a match was found in the subject alternative name extension.
please help.

Hi PS CL
[PS] C:\Windows\system32>Get-OutlookAnywhere
RunspaceId                         : c457e8aa-a0f3-4a0f-aa02-9eff24d02821
ServerName                         : exchange-svr01
SSLOffloading                      : True
ExternalHostname                   : mail.company.net
InternalHostname                   : exchange-svr01.domain.com
ExternalClientAuthenticationMethod : Negotiate
InternalClientAuthenticationMethod : Ntlm
IISAuthenticationMethods           : {Basic, Ntlm, Negotiate}
XropUrl                            :
ExternalClientsRequireSsl          : True
InternalClientsRequireSsl          : True
MetabasePath                       : IIS://exchange-svr01.domain.COM/W3SVC/1/ROOT/Rpc
Path                               : C:\Program Files\Microsoft\Exchange Server\V15\FrontEnd\HttpProxy\rpc
ExtendedProtectionTokenChecking    : None
ExtendedProtectionFlags            : {}
ExtendedProtectionSPNList          : {}
AdminDisplayVersion                : Version 15.0 (Build 712.22)
Server                             : exchange-svr01
AdminDisplayName                   :
ExchangeVersion                    : 0.20 (15.0.0.0)
Name                               : Rpc (Default Web Site)
DistinguishedName                  : CN=Rpc (Default Web
                                     Site),CN=HTTP,CN=Protocols,CN=exchange-svr01,CN=Servers,CN=Exchange
Administrative
                                     Group (FYDIBOHF23SPDLT),CN=Administrative
Groups,CN=domain,CN=Microsoft
                                     Exchange,CN=Services,CN=Configuration,DC=domain,DC=COM
Identity                           : exchange-svr01\Rpc (Default Web Site)
Guid                               : 33c3cb74-e490-487d-844c-4072334089a1
ObjectCategory                     : domain.COM/Configuration/Schema/ms-Exch-Rpc-Http-Virtual-Directory
ObjectClass                        : {top, msExchVirtualDirectory, msExchRpcHttpVirtualDirectory}
WhenChanged                        : 8/17/2013 10:14:55 AM
WhenCreated                        : 6/25/2013 1:47:50 PM
WhenChangedUTC                     : 8/17/2013 2:14:55 AM
WhenCreatedUTC                     : 6/25/2013 5:47:50 AM
OrganizationId                     :
OriginatingServer                  : ADserver.domain.COM
IsValid                            : True
ObjectState                        : Changed

Server Internal Error 500

Hi!! I have problems, when I execute http://localhost:7501/tools, and the login is administrator.My Error is:Server Internal Error 500 Thanks.

Hi!!
I include my weblogic.log
Thanks for you help !!!
"Michael Girdley" <----> escribió en el mensaje
news:3a96e5cc$[email protected]..
>
>
You should check the server log and console to see what's happening.
Michael Girdley
BEA Systems
Learning WebLogic? http://learnweblogic.com
"Erika Astorga" <[email protected]> wrote in message
news:3a944274$[email protected]..
Hi!! I have problems, when I execute http://localhost:7501/tools, and
the
login is administrator.My Error is:Server Internal Error 500 Thanks.
[error.txt]

Failed to set Subscriptions on the WSUS Server. Error:(-2147467259)Unspecified error

Recently restored SCCM 2012 SP1 from Sever 2008 R2, to Server 2012 R2. I had Updates Publisher installed on old 2008 Server with Firefox and Chrome imported into Configuration Manager. Since I have upgraded I am no longer able to sync updates with Microsoft.
WCM.log says:
Category Product:44048288-2aac-b2b5-3730-fc020622ea05 (Firefox) not found on WSUS
Category Product:cc5cb1bb-6b87-94ae-f96a-f758195112a7 (Chrome) not found on WSUS
Subscription contains categories unknown to WSUS.
Failed to set Subscriptions on the WSUS Server. Error:(-2147467259)Unspecified error
STATMSG: ID=6603 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_CONFIGURATION_MANAGER" SYS=wdlsccmpri.aarcorp.com SITE=AAR PID=2788 TID=4668 GMTDATE=Mon Feb 17 18:22:43.654 2014 ISTR0="wdlsccmpri.aarcorp.com" ISTR1=""
ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=
I have gone to deselect these products from syncing in Administration> Site > Configure Site Components >Software Update Point Products Tab. They are not there. Any help on getting SCCM to sync updates would be greatly appreciated.

PROBLEM
=========
Unable to sync after moving the Primary site server to different OS.
CAUSE
=======
Issues with the product and classification setup in the SUP after the restore.
RESOLUTION
===========
Ran below query to check if we have reference to Firefox and Chrome categories in the database.
QUERY:
select CategoryInstance_UniqueID, CategoryInstanceName
from fn_ListUpdateCategoryInstances(9) cat
where cat.AllowSubscription=1 and cat.IsSubscribed=1 and cat.IsParentSubscribed=0
order by cat.CategoryInstance_UniqueID
RESULT: [Along with other products we found Chrome and Firefox]
Product:44048288-2aac-b2b5-3730-fc020622ea05 Firefox
Product:cc5cb1bb-6b87-94ae-f96a-f758195112a7 Chrome
Ran Select Query
select * from CI_CategoryInstances where categoryinstanceid in
(select categoryinstanceid from CI_LocalizedCategoryInstances where LocaleID = 9 and CategoryInstanceName = 'Firefox'or
CategoryInstanceName = 'Chrome')
RESULT:
CategoryInstanceID CategoryInstance_UniqueID CategoryTypeName DateLastModified SourceSite ParentCategoryInstanceID IsDeleted rowversion
16777523 Product:cc5cb1bb-6b87-94ae-f96a-f758195112a7 Product 2013-11-27 21:05:23.000 AAR 16777522 0 0x0000000006B08673
16777549 Product:44048288-2aac-b2b5-3730-fc020622ea05 Product 2013-11-27 21:05:23.000 AAR 16777536 0 0x0000000006B08676
Ran Select Query
select * from CI_LocalizedCategoryInstances where LocaleID = 9 and CategoryInstanceName = 'Firefox'or
CategoryInstanceName = 'Chrome'
RESULT:
CategoryInstanceID LocaleID CategoryInstanceName rowversion
16777523 9 Chrome 0x0000000006B08674
16777549 9 Firefox 0x0000000006B08677
We did find Chrome and Firefox items in the database.
We need to delete these items in the database.
We used below queries to delete the reference from the database.
delete from CI_CategoryInstances where categoryinstanceid in
(select categoryinstanceid from CI_LocalizedCategoryInstances where LocaleID = 9 and CategoryInstanceName = 'Firefox'or
CategoryInstanceName = 'Chrome')
delete from CI_LocalizedCategoryInstances where LocaleID = 9 and CategoryInstanceName = 'Firefox'or
CategoryInstanceName = 'Chrome'
After deleting performed Scheduled Sync. Was successful

Outlook is unable to connect to the proxy server.(Error Code 10)

Hi,
I had problems with RPC proxy, I was trying to setup cutover migration.
So I read somewhere that i need to change the certprincipalname with Set-Outlookprovider.
But after this change my outlook was not working anymore
The settings before the change were:
Name Server CertPrincipalName TTL
EXCH
1
EXPR
1
WEB
1
So I set this back to the original (above) but this didn't helped...
Outlook 2013 and Exchange 2013
There is a problem with the proxy server's security certificate. The name on the security certificate is invalid or does not match the name of the target site mail.abc-company.com.
Outlook is unable to connect to the proxy server.(Error Code 10)

Hi,
Please make sure the mail.abc-company.com is included in your Exchange certificate which has been assigned with IIS service.
If possible, please run the following command for double check:
Get-ExchangeCertificate | FL
For Autodiscover service, please run
Test E-mail AutoConfiguration to check if the connection is successful in Log tab and confirm the other services URL can use proper namespace in Results tab for request access.
If the Autodiscover service fails, please create a SRV record with mail.abc-company.com for Autodiscover service to have a try:
http://support2.microsoft.com/kb/940881/en-us
Regards,
Winnie Liang
TechNet Community Support

Unable to connect the crm client with the IPC server

Hi,
I am unable to connect with one CRM client with the IPC server.
my Dispatcher and all the IPC servers are working all.
Plz helpme out.
With thanks and Regards,
Yusuf.

Hi Muhammed,
Check in the file dispatcher.properties if the RFC names are correctly maintained.
Regards,
Patricia
PS Your post was in the wrong forum. I moved it to the correct one where the chance of an answer is much higher.
Hope you understand and good luck.
Regards,
Patricia
SDN Moderator

Two clients in the same server--Script??

Hi Folks,
1.I have two clients in the same server say 100(used for dev) 120(used only for testing).I had developed a script in 100 which I want to test it in 120.Now how to move this script in 100 to 120.
2.How to use includes in scripts and what is the usage?
Thanks,
K.Kiran.

<b>INCLUDE: </b>Include other texts
With the command INCLUDE, you can include the contents of another text into your text. The text to be included exists separately from yours and is only copied at the time of the output formatting.With the INCLUDE command, you always get the most current version of the required text, since this is only read and inserted during the output formatting.
Syntax:
/: INCLUDE name [OBJECT o] [ID i] [LANGUAGE l] [PARAGRAPH p] [NEW-PARAGRAPH np]
The name of the text to be inserted must be specified and can have up to a maximum of 70 characters. If the text name contains blanks, then you must put it in quotes as a literal. It can also be specified via a symbol. All further parameters of the INCLUDE command are optional. If they are missing, SAPscript uses default values for them which are based on the respective call environment.
Examples:
/: INCLUDE MYTEXT
The text MYTEXT is included in the language of the calling text.
/: INCLUDE MYTEXT LANGUAGE E PARAGRAPH A1
The text with the name MYTEXT and the language E is included, regardless of in which language the calling text is created. The paragraph format A1 is valid as the standard paragraph for this call.
Optional specifications:
LANGUAGE If a language is not specified, the language of the calling text or the layout set is set for the text to be included. If a language is specified, the text is always loaded in this language, regardless of the language of the calling text.
PARAGRAPH The text to be included is formatted with the style allocated to it. With this parameter, the standard paragraph of this style can be redefined for the current call. All * paragraphs of the inserted text are then formatted with the paragraph specified here.
NEW-PARAGRAPH The first line of the included text has this format flag, provided it is not a command or comment line. If the optional entry PARAGRAPH (see above) is empty, all * paragraphs of the included text are formatted with the paragraph np specified with
NEW-PARAGRAPH.
OBJECT To specify a text completely, you must make further specifications regarding the text object. There are different rules and restrictions for this which depend on the object type of the calling text: All texts can be included in a layout set. If no object is entered here, TEXT is used (standard texts).With a documentation text (object DOKU), you can only include documentation texts. This object is assumed even if no object is specified in this environment. Only hypertext or documentation text can be included into a hypertext (object DSYS). If the OBJECT specification is missing, DSYS is set as a default value.
Only standard text (object TEXT), documentation text or hypertext can be included in any other type of text. The default object is TEXT if nothing is entered.
ID The text ID, which allows further text types within an object, is a further part of the text key. If the ID is not entered, the default Include ID from table TTXID is used for the calling text. If the specification is not in this table, the text ID of the calling text is used.
The ID together with the object are now the basis of a further consistency check:
All text IDs are allowed for a layout set.
Only documentation texts with the text IDs TX (general texts), UO (authorization objects), and documentation texts which have the same text ID as the calling documentation text may be included in documentation texts.
All DSYS texts may be included in DSYS texts, regardless of their ID. Documentation texts to be inserted may only have IDs TX and UO.
Standard texts with all the allowed text IDs, DSYS texts with all IDs, and documentation texts with Ids TX and UO may be included in the other types of texts.
Regards,
Santosh

Finally determined what causes an "Internal Error Occurred" message in FW

I use Fireworks for creating wireframes. One FW png file may contain many layers
with each layer representing a web page. The intention is to create the png file, and then to export it to a PDF file so that developers can use it to view the pages and to understand page navigation. I learned this technique by watching Jim Babbage's excellent video on using Fireworks for wireframing.
I create hotspots in the FW png file on one layer and use that to point to another layer that represents another web page. The purpose is to show a kind of flow or extra info for the developers. I've been struggling for over a year with an error that would pop up now and then when attempting to save the png file. The error would show "Internal Error Occurred" and I had no idea why this was occurring. I tried multiple things to get rid of the error and recently I finally discovered what was causing it.
It turns out that if you create a FW png file with layers, and you insert a hotspot that points to one of those layers, and then later when editing the FW png file you decide to delete a layer that is being referenced via a hotspot in a different layer, this error will occur. It doesn't occur every time you attempt to save the png file, but it will occur if you save the png file (no error shown), then export to a pdf file, then (as required by FW) attempt to save the png file again. That's when you will see the error for sure.
The cause is a hotspot link that points to a layer that no longer exists. This is most often caused by creating hotspots that point to the layer, then later deciding to delete that layer but you don't go back and remove any hotspot links to the deleted layer. For some reason, FW will let you attempt to save the file and may or many not show the dreaded "Internal Error Occurred" pop-up message. If you were able to save your png file and didn't see the error show up, and then you decide to export the png file to a PDF file, FW requires you to save the png file after the export option completes. It's when you attempt to save it at this time that it will show up for sure if your hotspot points to a deleted layer. The error message won't go away either.
It's kind of a pain if you have a bunch of layers with a bunch of hotspot links, but you will have to click on each hotspot and determine if it points to a layer that exists in the current png file. If that layer doesn't exist, you will have to point to a layer that does exist, or delete the hotspot to get rid of the "Internal Error Occurred" message.
Hope this helps,
Stevebo

After doing further testing, I've noticed that the error can't be reproduced every time a hotspot points to a nonexistent layer. BUT, every time I've encountered the "internal error occurred" message when saving a png file with hotspots and multiple layers, I have found one or more hotspots pointing to layers that no longer exist. Once pointing the hotspot(s) to a layer that does exist, or simply removing the hotspot(s), the "internal error occurred" message goes away.
So in my encounters with this error, finding the hotspot(s) that point to layer(s) that have been removed fixes the problem. The problem is that it doesn't always occur, just sometimes. It may have to do with the number of png files that may be open and the number of layers that exist, or once the error begins showing up. Just not sure, but I am sure of what I need to do to make the error go away in my case (remove hotspots that point to nonexistent layers). So far it's fixed the problem every time.
It would be interesting to see if others encounter this same error and if there is one or more hotspots pointing to deleted layers. It may be that the error message is simply a "catch-all" for errors that can't be determined and this just happens to be one scenario.
steve

What does this mean? The mail server responded: Too many messages. Please check the message and try again.

I use BT yahoo mail with Thunderbird 24.6.0 in the last few days i've started getting this message when sending messages:
An error occurred while sending mail. The mail server responded: Too many messages. Please check the message and try again.
Now sometimes the messages are sent anyway and sometimes not. If I re-send sometimes it works and sometimes not. I've contacted BT 'tech support' who tell me there is nothing wrong with them or their servers and as webmail works ok they won't help. I strongly suspect it IS a BT issue, Any clues to fix this?

The message means BT are lying basically. I have just spent the best part of an hour on chasing what limits BT place on mail sending... the internet contains a void.
The closest thing I can locate is a BT rep here https://community.bt.com/t5/Email/E-Mail-message-limit/m-p/1045228/highlight/true#M17523 refusing to identify what limits they impose but advising their switch to critical path has more stringent controls. AFAIK Critical path is ca mail software solution sold by OpenWave Messaging http://owmessaging.com/
So your paying for a totally undefined service. Congratulations!

SAP Client to the SAP Server: internal Error (-1102)[Message 131-183]

Similar Messages

Maybe you are looking for