SAP connector for CAD Integration with Unigraphics (NX)

Hi Experts,
Could you please guide me on where can I download CAD Integration connector for Unigraphics (NX).
Thanks in advance.
Kind regards,
Neil

Thank you very much for the useful link Martin. Anyway, there are some things that I cannot find for NX Unigraphics integration:
In the wiki you can find
You can download the CAD-Integration-Software from http://service.sap.com/swdc and then goto
Installations and Upgrades > Supplementary Components for Cross Industry Solutions > Life-Cycle Data Management > SAP PLM Integrations > select the desired integration
But that path does not exist in SAP download software page.
Also, in the availability matrix I can find integration with several systems (catia, solid edge, autocad...) but not unigraphics.
Could you please provide some more information on the topic?
Thanks a lot.
Neil

Similar Messages

  • Plz send step by step process  for Outlook integration with SAP

    Hi Basis experts
    Plz send step by step process  for Outlookexpress  integration with SAP.
    plz send if anybody have at the earliest.
    advance Thanks& regards to all
    Supriya

    Dear Supriya,
    If it is in SAP then please go through the below mentioed site
    http://www.duet.com/
    please tell me where in you want to integrate?
    Outlook Configuration with SAP-EP is a PPT file.
    please mail me your id i will send it accross.

  • KPRO for CAD Integration

    Hello All.
    Just wanted to cross check this from you. We have CAD Integrated with SAP.
    1. We have Dev Box, Q Box and P Box. I would need a KPRO on 3 different boxes. Am I correct ? Also do I have to change setting in SPRO in Dev, Q, and P to point to the respective correct Box - how do I do this.
    2. Also in Q-Box we have 2 different clients EQ50 and EQ100. Am I correct to say we will use the same EQ box and Partition it for EQ50 and EQ100, so that when I work in EQ50 the files can be saved in Partition in KPRO for EQ50 and when I work in EQ100, the files can be saved in different Partition. How to make this partition in KPRO and also how do I change SPRO config for KPRO for EQ50 and EQ100, to point to correct partition.
    Thanks,
    Sachin

    Thank you very much for the useful link Martin. Anyway, there are some things that I cannot find for NX Unigraphics integration:
    In the wiki you can find
    You can download the CAD-Integration-Software from http://service.sap.com/swdc and then goto
    Installations and Upgrades > Supplementary Components for Cross Industry Solutions > Life-Cycle Data Management > SAP PLM Integrations > select the desired integration
    But that path does not exist in SAP download software page.
    Also, in the availability matrix I can find integration with several systems (catia, solid edge, autocad...) but not unigraphics.
    Could you please provide some more information on the topic?
    Thanks a lot.
    Neil

  • Best practices for apps integration with third party systems ?

    Hi all
    I would like to know if there is any document from oracle or from your own regarding best practices for apps integration with third party systems.
    For example, in particular, let's say we need customization in a given module(ex:payables) need to provide data to a third party system, consider following:
    outbound interface:
    1)should third party system should be given with direct access to oracle database to access a particular payments data information table/view to look for data ?
    2) should oracle create a file to third party system, so that it can read and do what it need to do?
    inbound:
    1) should third party should directly login and insert data into tables which holds response data?
    2) again, should third party create file and oralce apps will pick up for further processing?
    again, there could be lot of company specific scenarios like it has to be real time or not... etc...
    How does companies make sure third party systems are not directly dipping into other systems (oracle apps/others), so that it will follow certain integration best practices.
    how does enterprise architectute will play a role in this? can we apply SOA standards? should use request/reply using Tibco etc?
    Many oracle apps implementations customizations are more or less directly interacting with third party systems by including code to login into respective third party systems and vice versa.
    Let me your know if you have done differently and that would help oracle apps community.
    thanks
    rrb.

    you want to send idoc to third party system (NONSAP).
    what kind of system is it? can it handle http requests
    or
    can it handle webservice?
    which version of R/3 you are using?
    what is the mechanism the receiving system has, to receive data?
    Regards
    Raja

  • LDAP  connector for Customer masters With SAP..........

    Hi Experts ,
    Our requirement is we have certain applications which are integrated
    with SAP Portal.
    For these applications Data sources are maintained in two different
    LDAPS.
    One LDAP (enterprise directory) is for USER data and the other LDAP for
    Customer  data(in this senario customer  data is nothing but business
    partner role oragnization).
      MY task is to build an interface for Customer data with LDAP sync.
    So here the question is, Can we use SAP standard LDAP connectors to
    make connectivity to the enterprise directory(LDAP)and push business
    partners data from CRM to the enterprise directory.
    In Standard SAP system which are standard LDAP connectors support
    this functionality?
    Please advice me and also let me know if we have any SAP notes for this
    senario.
    Best Regards
    Prasad

    Thank you very much for the useful link Martin. Anyway, there are some things that I cannot find for NX Unigraphics integration:
    In the wiki you can find
    You can download the CAD-Integration-Software from http://service.sap.com/swdc and then goto
    Installations and Upgrades > Supplementary Components for Cross Industry Solutions > Life-Cycle Data Management > SAP PLM Integrations > select the desired integration
    But that path does not exist in SAP download software page.
    Also, in the availability matrix I can find integration with several systems (catia, solid edge, autocad...) but not unigraphics.
    Could you please provide some more information on the topic?
    Thanks a lot.
    Neil

  • CAD integration with sap

    could any CAD integration experts give me some integration capability documents? i'm new to this area, just want to know the integration points between the cad and sap...for example: I've read some material, it saids that when the CAD design is near to complete, the material used in CAD will be transferred to SAPu2026
    The question is: how the CAD material is integrated with SAP  material master data? is this two different set of material master data? thanks in advance!

    Hi,
    It is not required to use interface only when the design is completed in CAD..these interfaces are bulit in such a way it will support complete CAD document life cycle ...
    http://wiki.sdn.sap.com/wiki/display/PLM/CADIntegrationin+PLM
    Thanks,
    Suresh HP

  • Brief discussion on SAP XI and its' Integration with SAP MDM.

    Hi,
    I have never worked on SAP XI.
    I am discussing it on brief, please give your valuable replies.
    SAP XI consists of System Landascape Directory(SLD).
    SLD Consists of Business System and Techinical System.
    Technical System contains all information about the software
    component. The Business System consists of Inbound and Outbound Business
    System which are used as logical names for data transfer.
    There is communication Channel for Receiver and Sender Business System and n agreement
    is signed between Sender and Receiver.
    Outbound Interface defined for Business System Outbound and Techical System associated
    with the Business System,
    Inbound Interface defined for Business System Inbound and Techical System associated
    with the Business System.
    In SAP NetWeaver XI Integration Directory, we have defined the Integration Scenarios,
    Actions, Interface Objects, Mapping Objects, Adapters Objects.
    Mapping Object defines the Structure and Value Mapping.
    Adapter Objects defines the Adapter program which implements RFC Adapter, FTP Adapter logic.
    FTP Adapter is used for XI-MDM Communication.
    RFC Adapter is used for XI-ECC Communication.
    Integration Repository: Both Outbound and Inbound Interfaces are Mapped with Value mapping and
    Structure Mapping inside Integration Repository.
    The File Adapter takes the File from the Outbound port of MDM System
    and sends it as IDOC to Receiver Business System.
    Value Mapping must be done between Sender and Receiver interfaces.
    Value Mapping is done by XSLT or Java based program.
    SAP NetWeaver XI Integration Server at runtime:
    Message Split, Interface Determination, Receiver Identifaction, Mapping, Techincal Routing
    and Call Adapter Proccess are done.
    In SAP XI 3.0 and MDM 5.5:
    Step 1: Create busines system as service.
    Step 2: Create communication channel for each business service. If the system can communicate
    through different channels, then create all possible channel types if necessary.
    Step 3: Create receiver agreement between the systems.
    Step 4: Interface determination:
    - Here you see for the first time the software component mentioned;
    there are some special requirements regarding this software component in relation to the customizing ID mapping.
    - To modify this software component, the customer needs to copy the SAP standard delivered software component
    into its own namespace. The customer is able to modify to create archives
    for the customized ID mapping.
    Receiver determination.
    Configure an FTP Server on the MDS.
    Create a send folder for outbound messages using outbound port(s) for
    remote systems(s).
    Create receive folder inbound messages using inbound port(s) for remote systems.
    This ia all about concept of SAP XI Infractsture and its' Integration with SAP MDM 5.5.
    Regards
    Kaushik Banerjee

    Hi Kaushik,
    You must be aware of File types that MDM Import Manager can Import i.e. we have XML, Excel etc. Now there are two transactions to extract data from R3
    1. MDMGX -
             - For lookup table extraction
             - Output in XML format which MDM can import without using XI.
              - FTP can be configured to put the file in the desired folder which will be then picked by Import Server.
    2. MDM_CLNT_EXTR -
              - For Main table records.
              - Output is in Idoc format which MDM doesn't understand hence we need XI in between which converts Idoc file received from R3 into XML which can then be imported using Import Manager or Import Server. For this we need to implement XI Scenario that consists of Source System, Receiver System, Type of Data etc.
    Just a basic understanding...
    Regards,
    Jitesh Talreja

  • SAP B1 8.8 integration with Crystal report

    Hi Experts,
    Is there different Installer for SAP B1 8.8 version.
    I installed crystal report for SAP B1, but I am getting following error
    " External connection to database failed. SAP Crystal add on may not function properly. Please rerun the Account setup with Superuser login"
    I am login as Super User & When i am trying to open Account Setup , i am getting following error -
    " Item - Could not commit action because the item is currently in focus. [ 66000-23]
    could you please suggest, possible solution
    tks,
    Sb1

    Hi Sb1,
    There is no external addon and installer for Crystal report integration with SBO 8.8. Just install SBO8.8 and CR2008 is using for only designing the reports. SAP already incorporated all the related integration in SBO 8.8 version.
    Thanks
    Sachin

  • Documents Needed for cFolder integration with SRM50

    Hello SRM Experts,
    I am in need of some info about the cFolder integration with the SRM system. Can anybody help me by sending some documents regarding the same. my email id is [email protected]
    Our system is SRM50 SP11.
    Thanks & Best Regards
    Raj

    Hi,
    Do you have cFolders on the same server as SRM ?
    Foll are the settings reqd:
    --.define a LS for cFolders( you have to duplicate SRM LS if it is on the same server)
    -->define an RFC destination for this system (even if same as SRM)
    -->define a backend system of type cFolders in SRM SPRO
    -->activate SICF cFolders service (with external alias)
    Normally the collaboration area should be displayed in document tab.
    See these related links;
    http://help.sap.com/saphelp_srm50/helpdata/en/c1/c3fe3930a34b2ae10000000a114084/frameset.htm
    http://help.sap.com/saphelp_ppm400/helpdata/en/e7/1fc30727cd4ddeb7f6351416ebf591/frameset.htm
    BR,
    Disha.
    Pls reward points for useful answers.

  • SAP MM- SRV Mgmt integration with Fleet management-Config Required

    Hi friends,
    My client is asking us to implement SAP fleet managent integration with SAP MM service management.kindly help me by providing config details also.
    Regards,
    William

    Hi,
    Read the below sap help
    http://help.sap.com/saphelp_470/helpdata/en/e3/0aeb1802e211d39eeb0000e8323350/frameset.htm
    Kapil

  • Shared Services Framework for HR - Integration with SAP ERP - SAP Library

    To add a comment, please log in or register on the top of this page and choose Reply. Please write your comment in English.
    You can also go back to the SAP help page.

    Is there any training for the SAP HR SSF in SAP Education in London for July/Aug 2014

  • SAP ISU(EpH 4) integration with MDUS using SAP PI 7.0

    Hello Everyone,
    As I am newbie to all this, I have been doing R&D to achieve the Integration between our SAP ISU and MDUS. Here is what I have already done.
    Establish the link between SAP ECC and SAP PI Server (Ports, RFCs, etc.)URL: Connection Settings between ECC and PI system - Process Integration - SCN Wiki
    SFW5: Switched the Utilities Component On
    SPRO: Define Advance meter capabilities and Activation Groups
    Imported the AMI related components IS-UT 604 to the IR
    Defined Landscape, Technical and Business Systems
    Here are the challenges I am facing and where I need your help.
    How do I configure a scenario (e.g. Remote Disconnect) in PI, I will be very happy for step by step instructions
    How do I configure that If I Disconnect the Device in ISU, a service call is generated in ISU which will flow from ECC -> PI Server -> MDUS and how do we test it?
    How do I check if the call has reached PI Server? I mean there must be some logging like ABC Application requested for XYZ Service.
    Your help is much appreciated. It is much like connecting the pieces yet unknown to me. Feel free to share if there is any guide or handbook available for a sample AMI Integration Scenario.
    Regards,
    Adil Khalil

    Hi Adil,
    Firstly download the Enterprise Services for SAP PI  from the service market place, released for the Ehp eg Ehp6 of your back end  ISU system.
    go to the below link
    https://websmp205.sap-ag.de/swdc
    Download all the (ES)content related to utilities  XI CONTENT-IS-UT  and load this in your PI system. Once you have these ESR in PI, you will be able to connect your SAP ISU system with the help of a proxy.
    Regards,
    Iqbal

  • SAP XI 2 BI Integration with ECC 6.0

    Dear all,
    we are planning to do XI integration between ECC 6.0 to BI
    1) How to Get the BI Standard data from ECC 6.0?
    2)We are planning to integrate Standard BI reports with ECC 6 0 through XI.
    Please sugget the scenario for integration between ECC 6.0 to BI through SAP XI.
    Thanks In Advance.
    Mahesh

    Hi Mahesh,
    Please go thru these links
    To push data from BW to XI, please check
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/g-i/how%20to%20push%20data%20into%20bw%20from%20xi.pdf
    To send data from XI to BW please check
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/g-i/integrate%20bw%20via%20xi.pdf
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40574601-ec97-2910-3cba-a0fdc10f4dce
    XI-BI Integration unsing RFC
    Pushing data from BI to XI using RFC Adapter
    https://forums.sdn.sap.com/click.jspa?searchID=17734474&messageID=5878682
    Thanks,
    Shweta

  • SAP IDM  7.0 integration with third party system

    Hi Experts,
    I know SAP IDM  7.0 can integrate with third party systems and create user ids on most of the third party systems.
    But I need to know regarding If it is possible to integrate with following systems
    1) Microsoft Exchange 2007 (  I know till exchange 2003 SAP  IDM support )
    2)  Microsoft  Active directory 2008 ( I know till Actice directory 2003)
    3) EMC  Documentum 6.5
    4)  ARIS 7.1.0
    5)  BlackBoard, Release 9.0
    6) Oracle 10g  ( Is it possible to create users at oracle level ? or at what level ? )
    7)  Sun Solaris Sparc  ( Is it possible to create users at  OS level )
    If you have information how on this please share. I know that  provisioning framework will have templates for most of the target systems. I want to know if they are available for above systems on SAP IDM 7.0 or if not have we can connect to them?

    Hi Matthew
    Your expertise in SAP IDM is indeed a great help!!
    >Can't see why not, it's all done via SQL commands. I've done similar things with MSSQL
    You mean that there will be oracle 10g drivers/oledb connectors in SAP IDM and in through SQL commands like "create user alfredo identified by alfredos_secret; " we can create user  in oracle database ?. As you said this should be possible.  What about creating user( user management ) in oracle 10g application  like dba or scot  and assigning the privileges in oracle application?
    >might need to do via UNIX scripts, but it can be done
    You mean that Unix scripts will be defined in SAP IDM and SAP IDM will execute these scripts in the Sun Solaris Sparc ?. It should be possible as you said. By the way how we will be able connect to Sun Solaris sparc ?  Is it via  the option "file " under the "Repositories" with repositories wizard  and later executing the file from SAP IDM ?
    Thank you once again for your expert answers on third party systems.

  • Need help for XI integration with MQ Series

    Hi,
    We are integrating XI with MQ Series for connceting Mainfrmaes.
    Third party adapters are available (iWAY,Software AG) without using these adapters, Are there any ways available?
    I need some ref documents.
    We are using JMS Adapter in XI for connecting MQ Series.
    Khaja

    Khaja ,
    XI as a product is shipped with the out-of-box adapter for JMS with which you can easily connect to WebSpehere MQSeries / SonicMQ. It gives you almost all the required facilties of setting JMS headers etc also.
    1. You would need to install MQSeries driver library onto XI server. Refer the How-To Guide on service marketplace for this.
    2. If your MQ is JMS enabled then you can use the XI JMS MQ interface(can select this option in adapter conf.) else go for NON-JMS.
    Navigate to the appropriate sections of help.sap.com and you will find all the relevant information
    http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
    --Amol

Maybe you are looking for