Sap console for windows 7 64 bit version

Hi Everyone,
I recently got a laptop which has Windows7(64 bit) installed in it. Please can anyone tell me from where can I download SAPLOGON for the above version.
Thanks,
Shubham

Hi,
SAP GUI 7.20 supports win7 64 bits. Check Note 66971 - Supported SAP GUI platforms:
"Windows 7 64bit edition on x64 (AMD) and Intel EM64T (only "Professional", "Ultimate" and "Enterprise" editions)."
You'll be able to find the download links and more info here: http://www.sdn.sap.com/irj/sdn/sap-gui
Cheers,
Diego.

Similar Messages

ITunes for Windows 7, 64-bit version not connecting to iPod

Hi, everyone! I'm having problems connecting my iPod Touch to iTunes version 11.0.1.12. I'm running Windows 7, 64-bit version on my PC. Whenever I open iTunes with my iPod Touch connected to my PC, iTunes immediately gives me the following error message:
"This iPod cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes, then install the 64-bit version of iTunes."
This confuses me because I already have the 64-bit version for Windows 7 installed on my PC. I've already uninstalled and reinstalled the 64-bit version three times; however, I'm still getting the same error message whenever I connect my iPod Touch and open iTunes.
Any help would be greatly appreciated. Thanks!

now nothing happens when I connect the iPod by USB - it's not even charging.
Do you have a laptop, Nin?
If so, the following document might be of some assistance with that:
[iPod not recognized when connected to Windows laptop over USB|http://support.apple.com/kb/TS1401]
(That issue seems to match your recognition and charging symptoms.)

No LaserJet M1319f software bundle for Windows 7 (64 bit) version.

Does anyone know if HP is going to have the entire software bundle for the HP LaserJet M1319f Multifunction Printer under the Windows 7 (64 bit) version? After updating my software,firmware and drivers for my new Win7-64bit pc I realized there was no software bundle installed. The drivers installed and I can print but no other software. It looks like they have it for the Win7-32bit and I tried to install it just to see if it would work and of course in errored out incompatible. Any information would be appreciated.

Below is a link to the HP site to download the printer software for Win 7x64. You will also notice an option to download a printer firmware update that is available for this model printer.
I hope this helps..
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=3547...
Dave M.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution.
I am an HP employee.

SAP Netweaver Download for windows 7 x64 bit

Hi,
I want to download SAP Netweaver for Windows 7 x64 bit. Can anyone give me a link or if someone has the software and can attach it here.
Thanks in advance.
Regards
Arpit

Hi Arpit,
Goto-> service market place->Click on software downloads->click on Installations and Upgrades-> click on Browse our Download Catalog->SAP NetWeaver and complementary products->SAP NetWeaver->depending on your Netweaver version select it->Installation and Upgrade->Microsoft Windows->Select your Db and download.
Regards,
Chandu

For the 2013 versions of macbook pro should I purchase 32 bit windows or 64 bit version to be able to install it on macbook and use windows with bootcamp?

for the 2013 versions of macbook pro should I purchase 32 bit windows or 64 bit version to be able to install it on macbook and use windows with bootcamp?

Then you might check at any of the other university book stores or software stores or any computer store in town for the 64-bit version.
If you want to use the 32-bit version from the school (you probably get it for free or very cheap) then you could purchase Parallels and run it as a virtual machine concurrently with OS X. There are some caveats:
1. You have to purchase Parallels (there may be an academic discount.) List is $79.95.
2. Your computer needs minimally 4 GBs of RAM, but realistically 8 GBs would be better.
3. Parallels creates a pseudo-drive on your hard drive. It could easily require 50 GBs of disk space.
Accommodating these might be more costly than buying 64-bit Windows 7. And, if you look online you may find them with an academic discount (or may be able to order it through the school.)

Can someone help me with installing the latest version of iTunes for Windows 7 64 bit Home Premium?

Latest version of iTunes for Windows 7 64 bit Home Premium downloads just fine. But, fails to install.
"Unblocked and gave all permissions." Still, no go.
I see by reading the other posts on this forum that I am not alone. Any help?
Frustrated!

Ok...This was very odd. I left the installation program, in what I considered a frozen state on screen. After about 30 mins, to my surprise, It installed! I'm not computer literate, so, I don't know what to say. But, to just WAIT for it to respond! Good Luck!

I want bootcamp windows7 support software for MacBook Air (mid 2011) , if any one has a windows 7 (32 Bit) version

I want bootcamp windows7 support software for MacBook Air (mid 2011) , if any one has a windows 7 (32 Bit) version? Please advise. Thanks in Advance.

Hi Syednz,
If you are looking for the BootCamp Support Software for your MacBook Air, you may find the following articles helpful:
Boot Camp: System requirements for Microsoft Windows operating systems
http://support.apple.com/kb/HT5634
Apple Support: Boot Camp Support Software 4.0.4326
http://support.apple.com/kb/DL1636
Regards,
- Brenden

Need an iCloud version for windows 8 64-bit pc

I'm looking for an iCloud download for windows 8 64-bit pc. Where do I get one?

Here's the apple download page.
https://www.apple.com/uk/icloud/setup/pc.html
Hope this helps.
PJRS

ActiveX problem in windows 7 64 bit version...

I have x64 bit windows 7 version operating system i used my all report as printmode="Activex"
1. http://i41.tinypic.com/k9861g.png
Check this URL.
I just want to know after installed the printconrol.dll, how the printcontrol.dll get registered / also in register
entry.
Let me know the procedure...
2.i hAVE INSTALLED THIS Crystal Reports Basic for Visual Studio 2008 x64 Redistributable Package (64 bit) IN MY
WINDOWS 7 64 BIT VERSION ON MY LOCAL PC WHICH HAS NO INTERNET ACCESSS
FROM THIS LINK
http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap
(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes
%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636
453735364436323635373233443330333033303331333633343335333033303336%7D.do
YOU HAVE SHOWN HOW TO REGSITER FOR vs2010..
regsvr32 "%programfiles(x86)%SAP BusinessObjectsCrystal Reports for .NET Framework 4.0CommonCrystal Reports
2011crystalreportviewersActiveXControls
BUT IM NOT FINDING THE PATH LIKE the above TO REGISTER MY PRINTCONTROL.DLL IN WIN7 64BIT AFTER INSTALLING Crystal
Reports Basic for Visual Studio 2008 x64 Redistributable Package (64 bit)
so would you please tell me how the above location comes for you..? to REGISTER DLL for us we are not getting the
location in my pc.
3. I COPIED PRINCONTROLL.DLL IN D: drive of win 7 64bit THEN I USED rEGSVR32 D:PRINTCONTROL.DLL IT SHOW DLL
REGSITER succesfully on clicking print button in CR toolbar the print dilogues comes get disapper?let me know whats
the problem. I applied the same pocedure on windows xp machine it works fine..
4. I have printcontrol.dll in downloaded prgram file. I just want to register the dll, it is no registering, please
let me know how to register.
thanks lot to Ludek Uher and Don Williams hows support are very good.. I hope i will get all the aboves in details

1) After Installing this software https://smpdl.sap-ag.de/~sapidp/012002523100009351332008E/CRBasicVS2008_redist_x64.zip what i have to do let me know other steps and will active x print control works or i have to do some more things...
2) i asked you above if i have internet in win 7 64 bit pc on clicking print button it shows me this dialogue
http://i41.tinypic.com/k9861g.png
after clicking Install Printcontrol.dll it goes to C:\Windows\Downloaded Program Files so how it register i want to know..?
2 point is my important want....
Thanks for your quick reply
Edited by: Priya_here on Nov 16, 2011 6:14 PM

HP Officejet 4255 driver for Windows 7, 32 bit. Not in pull up list or OS(can't update)

HP Officejet 4255 driver for Windows 7, 32 bit.
Driver is not in pull up list and not in OS(can't update OS basic). Almost all series are listed but 4200 series is missing.
After upgrade to Windows 7, it has become a problem. Some solution should be given.
Can someone help?
Regards,
Raul

Ok, I found in the Net the drive 7uw706ww.zip, which is Version 6.1.4.2, while the updated version is 6.1.10.5 (7UW708WW).
I tried again the GPS, and it wasn't working.
Anyway, before downgrading, I tried to reinstall the new driver, downloading and installing the .exe instead going through System Update.
Result: now GPS is working (same place, same conditions, just 5 minutes later)!
Don't know where the difference is...
600, R52, T61p, X301

HT1349 Trying to install latest iTunes for Windows 7 64-bit. Keep getting this error message "Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services."

Initially iTunes would not run although it had been running quite well up until now. Suddenly received this error on PC start-up "The program can't start because MSVC80.dll is missing from your computer. Try reinstalling the program to fix this problem." Research on Net pointed me to iTunes as the issue. Tried to start iTunes and received that message again. Tried installing latest version of 64-bit iTunes and received the subject message part way through the install: Trying to install latest iTunes for Windows 7 64-bit. Keep getting this error message "Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services."
iTunes has been running great on this PC for years. What's up?
Ron

See Troubleshooting issues with iTunes for Windows updates.
tt2

Cannot install Boot Camp 3.2 upgrade for Windows 7 64 bit

I recently installed Windows 7 64 bit on my macbook. I also installed Boot Camp 3.0.1 after Windows 7 installation, however, WiFi did not work. Therefore, I needed to upgrade to the latest Boot Camp 3.2. However, when I tried to install Boot Camp 3.2 upgrade for Windows 7 74 bit, I got an error message saying that I needed Boot Camp 3.1 installed first. I CANNOT find Boot Camp 3.1 upgrade for Windows 7 64 bit on Apple website at all. Can someone please help me on this? Is there a way to get the complete Boot Camp 3.2 package that can simply be installed on version 3.0.1??

here is the link to bootcamp 3.1 for windows 7 64 bit http://support.apple.com/kb/DL1336 .. and no there is no package that can be applied to the windows side to go from 3.0.1 to 3.2

Having issues installing iTunes 11.1.4 for Windows 7 (64 bit).

Issues installing iTunes 11.1.4 for Windows 7 (64 bit).This install clobbered my previous version of iTunes. Error message is "service Apple Mobile Device failed to start". Cannot start the service manually even though I am the administrator of the machine. There is obviously some conflict that was recently introduced by a Windows update or in the Apple installation. I have tried removing iTunes and the AMDS (the Apple mobile device service) and reinstalling with the same error message.
Thanks for any suggestions you can provide!
Marilyn

Hey there Marylin,
It sounds like you are unable to start iTunes due to this error message even after uninstalling the iTunes application and the Apple Mobile device. I would recommend uninstalling not just those 2 applications but iTunes and ALL its associated applications with the following article:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/ht1923
Thank you for using Apple Support Communities.
Regards,
Sterling

QuickTime 7.7 for windows vista 64 bit will not stream for me,anyone else having problems?

I updated to 7.7 quicktime and itunes 10.4.0.80(latest versions) for windows vista 64 bit .It appears to be working for movies I took with my camera no problem and other various tasks but I cannot get it to stream online videos.I did the test http://seminars.apple.com/seminarsonline/wctest/apple/level2/wctest.html on most of these I can hear audio fine but I get no visual.It will not stream from a place it has always streamed from and others at same place say it works fine for them with the new update.I have uninstalled and reinstalled configured the streaming according to apple I have set it to the default player I have dumped cache and still nothing...help!!!

ok without doing anything the streaming on the test page is suddenly coming up with a different page and the test streaming is working fine but still no streaming for the other place I always stream from...

Drivers for Windows Vista 64-bit on Satellite L300-1AM

When I can get drivers for Windows Vista 64-bit? Or I need to intall 32-bit drivers on my 64-bit Vista operating system?
Please links ;)

[Toshiba - Download Drivers|http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp]
In the Drivers Search Page (the link above) select these filters:
_Product type:_ +Notebook+
_Family:_ +Satellite+
_Product Series:_ +Satellite A Series+ (don't try the L series if you want to find anything useful)
_Operating System:_ +Windows Vista 64 Bit+
_Country:_ +World Wide+ (you have to select this in order to get rid of those multiple country options available for the modem)
_Language:_ +English+ (obviously)
Don't modify any other filter. The results will be about 100 (maybe more, but the site is set to show up to 100 results).
Advices:
1. Download the latest versions only (there's no point in downloading multiple versions of the same driver, yet they will be shown in the search results area)
2. Download what's specific to your laptop only (network - RealTek, both wired and wireless; chipset and graphics - Intel; modem - Toshiba; webcam - Chicony; there's no point in downloading anything from otehr vendors - except maybe the touchpad, but Windows can handle it properly without aditional drivers)
3. Don't download any BIOS or Firmware file; they might not be for your notebook, and installing the wrong ones is a sure path to screwing up your notebook (and losing the warranty); if you need them upgraded, go to the download page for your specific model, Windows XP or Windows Vista 32 Bit drivers (since they are OS independent anyway)
Toshiba utilities (DVD Player, ConfigFree, etc.) should be OK too (again, download the latest version only).
BTW, I own 2 Toshiba notebooks (L300-1AM and L300-1AN; quite similar, the differences are in HDD and CPU only) and I had the same problem: no 64-bit drivers (and the same "support"). Quite strange the idea that Toshiba is testing these 64-bit drivers before releasing them (according to a previous post), since the same drivers, for the very same chipsets - but installed on other models - are available. Windows Vista 64-bit is out on the market for nearly 2 years now, the production of these models has already been stopped (and I assume they have not been produced during one night only :) ), yet they had no time to test the drivers... High-class support from Toshiba!

Sap console for windows 7 64 bit version

Similar Messages

Maybe you are looking for