SAP CRM 5.0 (PCUI): 'Survey could not be found'
<u>Surveys in CRM 5.0 (PCUI):</u>
I want to use surveys in PCUI. In SAP GUI everything works fine but in PCUI the following error message occurs: 'Survey could not be found' . What additional customizing is necessary to work with surveys in PCUI?
Thanks in advance
Hi,
BSP is selected but what needs to be done additionally to create a survey 'web enabled'.
Thanks in advance.
Regards
André
Similar Messages
-
Error trying to delete CRM trans. Administration header could not be found
We were trying to delete a few transactions (Leads & Opportunities ) from our system using T code: CRMD_ORDER. but got this error message: "Administration header could not be found XXXXXXXXXXX". I tried using the program CRM_ORDER_DELTE, but got the same error message. I tried BAPI: BAPI_LEAD_DELETEMULTI but got the same error message.
I applied the Note: 1087462 and then tried to delete these transactions and still got the same error message. Is there any solution to this problem for CRM 5.0?
Steps for Reconstruction
1. Go to T code: CRMD_ORDER
2. Enter Shift+F5 and enter transaction#: XXXXXXX.
3. In Menu- select "Business Transaction" & "Display/change".
4. Once in change mode go back to Menu and select "Business
Transaction" & "Delete".
5. Click "Yes" on the pop-up.
6. The error msg: "Enter Business partner" should appear - Msg#
CRM_EMAIL320
7. Hit enter, the error msg: "Administration header could not be found
XXXXXXXXXX" appears.Received response from SAP support partner:
Please verify first if the issue is caused by badi implementation
of ORDER_SAVE badi. Please check method prepare and check_before_save.
Maybe inside your implementation the function crm_order_read is called
but that is not possible in case of deleting a document as document is
not available anymore.
If that doesn't work try this one:
Please check to see if you have a badi ORDER_SAVE method
CHANGE_BEFORE_UPDATE. Please deactiviate the ORDER_SAVE Badi and retestthe deletion.
This is how we resovled our issue - hope this helps someone else:
Check using T Code: SE80 to look for a BADI implementation which used BADI: ORDER_SAVE:
SE80-> Package: Z* (look for custom packages) -> Look under enhancements for any BADI Implementations which have used ORDER_SAVE (double click implementation and in the right pane look under Definition name).
Click 'Change' and deactivate this implementaiton. Now try to delete the CRM transaction. The error msg should not pop up now. Once deletion is completed reactivate this implementation.
This is just a work around. The problem lies in the code and the code within the implementation should be debugged and fixed so that this error message does not come up again.
Edited by: Ramesh Nallabelli on Feb 9, 2009 5:18 PM -
The cluster resource could not be found-SAP ECC on Windows Server 2008 MSCS
Hi,
I'm installing SAP ECC 6.0 on Windows server 2008 MSCS Cluster. As mentioned in the guide, i've created a service and added a resource.
I was able to successfully configure the DB installation and cluster configuration. But when I start the ASCS installation, the installation fails when it tries to create system folders with the following error.
Error when sharing file system export (share) saploc : The cluster resource could not be found
I'm using a user with domain admin access and also a member of the local administrators group. I've even tried to install using the domain administrator user but still the problem exists.
Can anyone please let me know where am I going wrong ?
NB: The host on which I'm installing is not a domain controller but it is a member of a domain.
Regards,
Varadharajan MYes Krishna,
I've not created any shared folders manually and I've used the "Use domain of current user" option.
Actually SAPINST has created the usr and sap folder in the SAP drive (say E: drive) which is a clustered disk. The name of that clustered sidk is "Clustered Disk 1". I could able to open up the shared directories available in that SAP virtual host by issuing
<SAPGRP>. I don't know where am I going wrong:( I've also opened a call with a SAP and waiting for their reply.
Regards,
Varadharajan M -
Error message: Header Administration could not be found GUID
Hi,
I am trying to delete service orders by ABAP-program in SAP CRM ver 5.2.
I have tested both CRM_ORDER_DELETE and BAPI_BUSPROCESSND_DELETEMULTI. The problem is if the service order is missing the User Status, sometimes (not always!) both these function modules will crash with following message: (without throwing any exception)
Header Administration could not be found <GUID>
How can I avoid this situation? In case the system cannot delete a certain service order because of some errors on the service order, I would like to catch it as an exception instead of getting a dump.
By the way, I even tried to disable all BAdI implementations of ORDER_SAVE but it did not help.
Thanks and regardsHello Steven,
What exactly is the code in the BADI trying to achieve? May be a code snippet would help us understand the issue better.
Regards
Nisha -
Crystal report error (The table '' could not be found)
Dear Expert,
As I know, the end user who don't want to edit the crystal report design no need to buy crystal report,right?
Using the 'Crystal reports for SAP B1', they already view the report.
But, how about, if I had created one crystal report, and then I want to distribute to end user. When I load the report on user machine that dont have crystal report, the system shown an error (The table '' could not be found).
I think, maybe because of the database location. When I create the report, of course I made connection to my machine as a source of database location. But, how i'm going to change the database location to user machine?
Is it when we login into SAP, did SAP auto detect the new location source? And will auto create connection to the crystal report?
Thanks in advance for any help.Hi ,
We do not create the database connection for the end user. the end user must have the same database connection as it is set up on your machine. The report is looking for the same connection, with the same access into the database.
Best regards,
Jadie -
Error in Broadcaster - An Active RFC Server could not be found
Hi all,
I am trying to broadcast a workbook to my mailbox through Information Broadcasting, i am trying this in BI 7.0 system. In the Broadcasting wizard, I gave my mailid & the other required credentials. But when i click on Schedule, i am getting a Error message "An Active RFC Server could not be found. Error occured during processing of framework class CL_RSRD_PRODUCER_EXCEL, type PROD".
I checked in SU01 & my mailid is already added there. So, where am i missing or is there any settings need to be done for the Broadcaster to work?
Thanks,
MuraliThe precalc server is not needed if you are generating html output, but certainly is mandatory for the Broiacaster to run/distribute BEx Excel Workbooks.
The BW needs access to a Windows computer that has Excel on it. The BW connects to the Precacl and sends it a request it run a BEx wkbk, which the BW then can email to users.
The precalc server is a Windows Service. You can install it locally on your desktop, or it can be installed on a windows server. There is a little config that needs to be done. The How To Troubleshoot Information Broadcasting link in the other resposne will provide all the steps. You should obtain the most current version of the software from SAP.
You'll need a precalc server for each BW system in your landscape that you want to broadcast BEx wkbks from, so if you have Dev and QA systems, you'll need precalcs for them as well. -
TF201072: A user or group could not be found
We are using TFS2010 (for source control only), and until recently
everyone was using VS2010. Our developers just installed VS2012.
When you go to "Pending Changes" in Team Explorer, we are seeing
TF201072: A user or group could not be found. Verify that the
users and groups used in your work item type definition have been added
to Team Foundation Server., twice, at the top. We can still check-in code from VS - seems this error is ignored.
However, we are unable to shelve changes - when you attempt to
shelve, the same error comes up in a popup, and the shelveset is not
saved.
We can shelve using the command prompt (tf shelve), and
can still shelve using VS2010, so it doesn't seem to be a permission
issue. Also, the TFS administrator is not seeing the error message, and
can shelve from VS2012 with no error.
Any thoughts as to what could be causing VS to error out here? We've tried clearing out the TFS cache, creating a new workspace, and gone over every option we could find in Visual Studio.Hi Rudy,
I'd like to know more details about the reproduce steps, and whether you have upgraded your TFS server. If you don't have permission to access the database, then you can ask TFS administrator to grant you corresponding permissions to access the database
you're trying to access.
And you can check whether built-in records were missing in table TFSIntegration..tblsubscription. Refer to the link below for more details:
http://blogs.msdn.com/b/emmamou/archive/2009/03/13/a-case-study-on-tfs-identity-replication.aspx?wa=wsignin1.0&CommentPosted=true#commentmessage
Another option is check if the SID of service account is correct. Replace SID if not, you can refer to this
thread for the steps.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Dboraslib.dll - Error 126 : "The specified module could not be found."
Hi,
After installation XI 3.0 and adapters, the dispatcher(dispwork.exe) is failing to start in a ABAPJ2EE system (web AS 6.40).
The dev_disp trace file shows the following error:
Please do help to resolve this problem.
trc file: "dev_disp", trc level: 1, release: "640"
Mon Aug 09 12:14:43 2004
kernel runs with dp version 124000(ext=101000) (@(#) DPLIB-INT-VERSION-124000-UC)
length of sys_adm_ext is 524 bytes
ERROR => DlLoadLib: LoadLibrary(dboraslib.dll) Error 126 [dlnt.c 237]
Error 126 = "The specified module could not be found."
systemid 560 (PC with Windows NT)
relno 6400
patchlevel 0
patchno 1
intno 0
make: multithreaded, Unicode
pid 2908
***LOG Q00=> DpSapEnvInit, DPStart (00 2908) [dpxxdisp.c 1093]
shared lib "dw_xml.dll" version 1 successfully loaded
shared lib "dw_xtc.dll" version 1 successfully loaded
shared lib "dw_stl.dll" version 1 successfully loaded
shared lib "dw_gui.dll" version 1 successfully loaded
Mon Aug 09 12:14:48 2004
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3878]
MtxInit: -2 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: JAVA is not active
DpShMCreate: sizeof(wp_adm) 10528 (1316)
DpShMCreate: sizeof(tm_adm) 2506872 (12472)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpShMCreate: sizeof(comm_adm) 290000 (580)
DpShMCreate: sizeof(vmc_adm) 0 (372)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: SHM_DP_ADM_KEY (addr: 06440040, size: 2919328)
DpShMCreate: allocated sys_adm at 06440040
DpShMCreate: allocated wp_adm at 06441B58
DpShMCreate: allocated tm_adm_list at 06444478
DpShMCreate: allocated tm_adm at 064444A0
DpShMCreate: allocated wp_ca_adm at 066A8518
DpShMCreate: allocated appc_ca_adm at 066AE2D8
DpShMCreate: allocated comm_adm_list at 066B0218
DpShMCreate: allocated comm_adm at 066B0230
DpShMCreate: allocated vmc_adm_list at 066F6F00
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 066F6F28
DpShMCreate: allocated wall_adm at 066F6F30
MBUF state OFF
Mon Aug 09 12:14:49 2004
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation std
<EsNT> Memory Reset enabled as NT default
<EsNT> EsIUnamFileMapInit: Initialize the memory 614 MB
<ES> 613 blocks reserved for free list.
ES initialized.
Mon Aug 09 12:14:52 2004
J2EE server info
start = TRUE
state = STARTED
pid = 3216
argv[0] = C:\usr\sap\SXI\DVEBMGS00/j2ee/os_libs/jcontrol.exe
argv[1] = C:\usr\sap\SXI\DVEBMGS00/j2ee/os_libs/jcontrol.exe
argv[2] = pf=C:\usr\sap\SXI\SYS\profile\SXI_DVEBMGS00_cgnlpt036
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1352
argv[5] = -DLISTEN_PORT=1353
argv[6] = -DSAPSYSTEM=00
argv[7] = -DSAPSYSTEMNAME=SXI
argv[8] = -DSAPMYNAME=cgnlpt036_SXI_00
argv[9] = -DSAPPROFILE=C:\usr\sap\SXI\SYS\profile\SXI_DVEBMGS00_cgnlpt036
argv[10] = -DFRFC_FALLBACK=ON
argv[11] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 2.0 2.0 3.1.1) [dpxxdisp.c 1455]
***LOG Q0K=> DpMsAttach, mscon ( cgnlpt036) [dpxxdisp.c 9701]
Mon Aug 09 12:14:54 2004
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6400, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1025]
DpMsgAdmin: Set patchno for this platform to 1
Release check o.K.
Mon Aug 09 12:15:33 2004
ERROR => W0 (pid 3224) died [dpxxdisp.c 12152]
ERROR => W1 (pid 3232) died [dpxxdisp.c 12152]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W2 (pid 3240) died [dpxxdisp.c 12152]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W3 (pid 3248) died [dpxxdisp.c 12152]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W4 (pid 3256) died [dpxxdisp.c 12152]
ERROR => W5 (pid 3264) died [dpxxdisp.c 12152]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W6 (pid 3272) died [dpxxdisp.c 12152]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W7 (pid 3280) died [dpxxdisp.c 12152]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
killing W0-3224 (SIGUSR2)
ERROR => DpWpKill(3224, SIGUSR2) failed [dpxxtool.c 2464]
killing W1-3232 (SIGUSR2)
ERROR => DpWpKill(3232, SIGUSR2) failed [dpxxtool.c 2464]
killing W2-3240 (SIGUSR2)
ERROR => DpWpKill(3240, SIGUSR2) failed [dpxxtool.c 2464]
killing W3-3248 (SIGUSR2)
ERROR => DpWpKill(3248, SIGUSR2) failed [dpxxtool.c 2464]
killing W4-3256 (SIGUSR2)
ERROR => DpWpKill(3256, SIGUSR2) failed [dpxxtool.c 2464]
killing W5-3264 (SIGUSR2)
ERROR => DpWpKill(3264, SIGUSR2) failed [dpxxtool.c 2464]
killing W6-3272 (SIGUSR2)
ERROR => DpWpKill(3272, SIGUSR2) failed [dpxxtool.c 2464]
killing W7-3280 (SIGUSR2)
ERROR => DpWpKill(3280, SIGUSR2) failed [dpxxtool.c 2464]
NiWait: sleep (10000 msecs) ...
NiISelect: timeout 10000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:43 2004
NiISelect: TIMEOUT occured (10000 ms)
dump system status
Workprocess Table (long) Mon Aug 09 06:45:43 2004
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 3224 Ended no 1 0 0
1 DIA 3232 Ended no 1 0 0
2 UPD 3240 Ended no 1 0 0
3 ENQ 3248 Ended no 1 0 0
4 BTC 3256 Ended no 1 0 0
5 BTC 3264 Ended no 1 0 0
6 SPO 3272 Ended no 1 0 0
7 UP2 3280 Ended no 1 0 0
Dispatcher Queue Statistics Mon Aug 09 06:45:43 2004
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
3
2000
10
10
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 13
wake_evt_udp_now 0
wake events total 9, udp 6 ( 66%), shm 3 ( 33%)
since last update total 9, udp 6 ( 66%), shm 3 ( 33%)
Dump of tm_adm structure: Mon Aug 09 06:45:43 2004
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Mon Aug 09 06:45:43 2004
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000 msecs) ...
NiISelect: timeout 5000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:48 2004
NiISelect: TIMEOUT occured (5000 ms)
Shutdown server ...
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=3216)
killing process (3216) (SOFT_KILL)
DpIJ2eeShutdown: j2ee state = SHUTDOWN
NiSelClear: removed hdl 3 from selectset
DpDelSocketInfo: del info for socket 3 (type=7)
NiBufClose: clear extensions for hdl 3
NiBufSetStat: bufstat of hdl 3 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 3 / socket 456
NiSelClear: removed hdl 4 from selectset
DpDelSocketInfo: del info for socket 4 (type=9)
NiBufClose: clear extensions for hdl 4
NiBufSetStat: bufstat of hdl 4 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 4 / socket 448
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 5, data complete
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes...
Stop gateway
killing process (3172) (SOFT_KILL)
Stop icman
killing process (3196) (SOFT_KILL)
Terminate gui connections
[DpProcDied] Process lives (PID:3172 HANDLE:472)
waiting for termination of gateway
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:49 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process died (PID:3172 HANDLE:472)
[DpProcDied] Process died (PID:3196 HANDLE:464)
DpHalt: cancel all lcom connections
MPI CancelAll 2 -> 0
MPI DeleteAll 2 -> 0
[DpProcDied] Process lives (PID:3216 HANDLE:440)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:50 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:51 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:52 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:53 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:54 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:56 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:57 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:58 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:59 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:16:00 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:16:01 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:16:02 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:16:03 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:16:04 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:16:05 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:16:06 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process died (PID:3216 HANDLE:440)
NiIMyHostName: hostname = 'cgnlpt036'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 163 bytes
NiBufSend starting
NiIWrite: write 562, 1 packs, MESG_IO, hdl 5, data complete
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 9927]
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 5, data complete
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiSelClear: removed hdl 5 from selectset
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/8
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 19)
MBUF component DOWN
NiBufClose: clear extensions for hdl 5
NiBufSetStat: bufstat of hdl 5 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 5 / socket 368
MsIDetach: detach MS-system
EsCleanup ....
***LOG Q05=> DpHalt, DPStop ( 2908) [dpxxdisp.c 8460]
Good Bye .....Hi,
Thanks for the reply.
dboraslib.dll is properly installed - I checked the registry and physical location of the file.
The problem was : Environment variable "Path" not being set properly for the "oracle jre".
Solution:
After setting the path, the dispatcher started to run properly without any problems.
Path=<Drive>\oracle\ora92\bin;<Drive>\Program files\Oracle\jre\1.3.1\bin; <Drive>\Program files\Oracle\jre\1.1.8\bin
FYI - We are using WIN2K with SP4 and oracle DB 9.2
Regards,
Sridhar -
MIGO-Sales price for material (NL1S ROH1 ) could not be found
Hi Experts
When i doing MIGO , i am getting following Error Message .i.e.,
*Sales price for material (NL1S ROH1 ) could not be found*Message no. M7158
Diagnosis
The sales price valuation is active in the valuation area.
The system could not determine a sales price on the specified posting date for material NL1S ROH1 in unit of entry in plant .
Sales price conditions may not be defined for the material in plant .
Procedure
u2022 If you have a goods receipt for a purchase order or an order, the sales price is taken from the purchase order or the order concerned.
Check the sales price in the purchase order or the order.
u2022 if you have goods movements without a reference, you can specify the sales value (sales price including sales tax) manually.
If the screen does not have the field Sales price, then you have a Customizing error: the sales price valuation was activated in the valuation area, but the field selection of the movement type was not changed accordingly. In this case, contact your system administrator.
u2022 Check the definition of the sales price.
Note that for distribution centers, the sales price of the consumer distribution chain maintained in the distribution center's master data is used.
Proceed
If you post this movement without the sales value, the movement will be valuated with value zero. This can change the average sales price.
Please Advice us ...
Thanks in advance
Regards
Rajesh .PHello,
Please check the following:
-check with SE16 at table T001K whether you have sales pricing active for your valuation area,does your material belong to a very special material type
-Check SAP Note 84480 ,109881
-No sales price exists, no goods movements can be posted for an article subject to value-based inventory management. You must maintain the sales price in all cases.
Please refer the link below:
http://help.sap.com/erp2005_ehp_04/helpdata/en/12/085e95470311d1894a0000e8323352/frameset.htm
hope the information is helpful
regards -
Account 'Contra account: Acquisition value' could not be found in ASKB
Hi SAP experts
1. First we have created new asset with reference old assets in As01
2. After that we have transfer all asset from old to new asset with in the company code in the ABUMN T.code in the month on 01.04.2010
3. After that we have run the deprecation for April, May and Jun. Up to this, there were no problem those periods
(now here we are following first we are running the ASKB and after that we are running AFAB)
4. now we are facing the new issue for July month while running ASKB Like Below
Account 'Contra account: Acquisition value' could not be found for Deprecation area 52
Message no. AU133
Diagnosis: When creating the accounting document, the system could not find account
'Contra account: Acquisition value' for company code 0216.
System Response
Procedure: Enter this account in the account determination for Asset Accounting.
Here in Error log it showing three account determinations 100002,100010 and 100040
5.As per my knowledge we can maintain the G/L account for account determination in the T.code AO90 for deprecation area wise but why the new error massage has come into picture.
Please let me know if you require more information about the issue
Can you any body please give me suggestion based on the issue and
Thanks and Regards
sudharshana vamsiHi Sridevi
Thanks for your suggestions
if i will maintain G/L account for account determination in the T.code AO90 for deprecation area wise, is there any effects for another company codes and balance sheet wise
And also we are running depreciation since 2003, now suddenly it is coming into picture in the month of July. and may i know the reason. Are there any new patches are added in sap
And also if you donu2019t mind can you tell me what are purpose to maintain the Contra G/L account in the AO90.
Thanks and Regards
sudharshana vamsi -
Error AU133 Account 'Contra account: Acquisition value' could not be found
I have this error when running RAPERB2000 program in IDES ECC6.0.
I have checked AO90 and this B/S account (199990) is maintain correctly in area 64 for the account determination.
This is the job log:-
02.12.2010 23:21:41 Errors occurred during the posting run (see the log)
02.12.2010 23:21:41 Company code AA01, depreciation area 64, fiscal year 2010, account group 30000
02.12.2010 23:21:41 Account 'Contra account: Acquisition value' could not be found for area 64
02.12.2010 23:21:41 Company code AA01, depreciation area 64, fiscal year 2010, account group 40000
02.12.2010 23:21:41 Account 'Contra account: Acquisition value' could not be found for area 64
02.12.2010 23:21:41 Company code AA01, depreciation area 64, fiscal year 2010, account group 30000
02.12.2010 23:21:41 Account 'Contra account: Acquisition value' could not be found for area 64
02.12.2010 23:21:41 Document INT-000026 was created successfully for Asset Accounting
02.12.2010 23:21:41 Company code AA01, depreciation area 99, fiscal year 2010, account group 20000
02.12.2010 23:21:41 Document INT-000027 was created successfully for Asset Accounting
02.12.2010 23:21:42 Errors occurred during the posting run (see the log)
Anyone has any idea why this error occur?Hi,
Error AU133, is generally issued from some wrong or missing customizing. The text of the error message indicates in your case that a "Account 'Contra account'" and area 64 is concerned.
1) At first, please double check if in in AO90 (or table T095) the account is maintained for area 64. Do you have not defined a contra account for acquisition value postings in the Asset Accounting Customizing settings (Transaction AO90)?
Further, check in tr. OADB if you have defined "Different Depreciation Area XX". That means area 64 takes the account determination from area xx and perhaps there it is no account defined?
If this is not the reason:
2) Execute report RACKONT1 or transaction OAK4. Account determination should be set following the rules explained in SAP note 7595. Even if some account is not directly used, the account determination has to be completed. If output from RACKONT1 is not error free, it indicates that your customizing is wrong. You might correct it with the help of note 7595.
Furthermore:
3) You have defined the account in Asset Accounting, however, it is not created in the affected company code. Check whether the account is correct and create it for the company code, if necessary.
4) You have entered an asset reconciliation account for the "Contra account: Acquisition value posting" (for example, the same account as for the "Acquisition:Acquis. and production costs" account). This is not permitted.
5) As "Contra account: Acquisition value posting" you entered an asset G/L account. If necessary change the automatic posting indicator in the G/L account master record.
Regards Bernhard -
Account 'Acquisition:Acquis. could not be found for area 01 AU133
To provide for reporting in USD group currency the leading ledger currencies for each company code has been changed from only local currency to also include the group currency (type 30) of USD.
Once the above setting for group currency was made the fixed asset transactions are not posting and the subject error message is occurring. The threads in this forum for this type of issue have been read and all the t-codes have been checked (AO90, AO93, OADB, OAK4, OABW, etc. with no change. The account is defined for the company code as an asset reconciliation account. No SAP Notes were found to be helpful with this either.
Any suggestions other than these are greatly appreciated.hi i have the kinda same problem "Account 'Loss made on asset retirement w/o reven.' could not be found for area 50" my dep. area is derived dep. area called 50 which is difference between 01 gaap and 25 ifrs dep. areas.
in oadb the XSTORE is not flagged, BUHBKT set for 5 and LDGRP_GL is set for IF ledger when i run askb some of the assets issues this error but i have done all the custm. in ao90 what could be the reason for this by the way all of the accounts derived from 01 and all of the accounts set in 01.
Edited by: farukisin on Jan 17, 2012 3:54 PM
problem solved some times the problem could be so tiny so that you cant see,
this is one of them the gl account was not created for the company code
Edited by: farukisin on Jan 19, 2012 3:50 PM -
The definition of the READ RFC to the managed system could not be found. Pl
Hi there,
i try to setup a managed system on our Solution manager for E2E Analysis... but the Setup gave me a sort of errors
The definition of the READ RFC to the managed system could not be found. Please make sure to run the RFC creation assistant in SMSY, as described in setup documentation
and
No RFC Read User (SOLMANSOX001 or SM_SID) was found at ABAP Host=HOST sys=00 client=001 for roles assignment. Please make sure you have run the RFC creation assistant for this system, in SMSY. If a user name different from the default 'SM_<SID>' or 'SOLMAN<SID><CLIENT>' was specified in the SMSY RFC creation assistant, you need to assign by hand the following roles & profiles to the Read RFC User : SAP_SATELLITE_E2E (role), S_AI_SMD_E2E (profile)
So which documentation means the setup where is described how to create the RFC Destinations with SMSY.. Thanks
Regards
Edited by: Bjoern Bayerschmidt on May 17, 2010 5:45 PMHello,
The documentation is located at [Help|http://help.sap.com/saphelp_smehp1/helpdata/en/b3/64c33af662c514e10000000a114084/frameset.htm]
Then navigate Basic Settings > Solution Manager System Landscape > Create Systems > Generate RFC Connections
You can:
Assign an existing RFC destination to a client with Assign and Check RFC Destinations.
Generate RFC destinations for your managed systems
Change existing RFC connections.
Delete RFC destinations.
Resolve RFC Generation Errors
I hope you find this information helpful.
Regards,
Paul -
Webdynpro - Object could not be found in cache, key is null
Folks
I am getting this marvelous exception for which I am not able to find any not in SAP Service Portal as well. Any insights shared will be highly appreciated.
[EXCEPTION]
com.sap.tc.webdynpro.services.sal.util.cache.ResourceNotFoundException: Object could not be found in cache, key is null!... [see details]
EXCEPTION]
com.sap.tc.webdynpro.services.sal.util.cache.ResourceNotFoundException: Object could not be found in cache, key is null!
at com.sap.tc.webdynpro.services.sal.util.cache.WebResourceCache.getResource(WebResourceCache.java:108)
at com.sap.tc.webdynpro.services.sal.util.cache.WebResourceCache.getResource(WebResourceCache.java:134)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.datatransport.DataTransportFactory.getOutputMassDatasource(DataTransportFactory.java:93)
at com.sap.tc.webdynpro.services.sal.datatransport.core.InternalMassDataTransport.getOutputMassDatasource(InternalMassDataTransport.java:50)
at com.sap.tc.webdynpro.progmodel.context.ModifiableBinaryType.parse(ModifiableBinaryType.java:133)
at com.sap.tc.webdynpro.clientserver.data.DataContainer.doParse(DataContainer.java:1434)
at com.sap.tc.webdynpro.clientserver.data.DataContainer.validatePendingUserInput(DataContainer.java:1324)
at com.sap.tc.webdynpro.clientserver.data.DataContainer.validatePendingUserInput(DataContainer.java:681)
at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.validate(ClientComponent.java:715)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doValidate(WindowPhaseModel.java:326)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:120)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:319)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)Is the system 6.40 release ? Have you referred to SAP Note 923694 ?
Search in SAP Notes for 'Importing A Web Dynpro Hot Fix', find the one relevant for your SP level and make sure you have implemented those fixes if you find one for the SP.
Hope this helps
Regards,
Snehal -
Hello Everyone,
We are getting an error while trying to create an Universe via Microsoft -> MS Analysis Services 2014 -> OLEDB for OLAP Provider under Connection in UDT -"DBD: Error while trying to load the transport provider for odbc. Failed to load the library. System error: The specified module could not be found." We have installed BI 4.1 SP05 in our system. As per earlier posts in scn in BO XI 3.x this issue used to be for improper installation of Integration KIT but in our scenarion Integration KIT is within the BO 4.1 package so no seperate installation is required. Moreover I have checked whether all the driver is present under file: "C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\dataAccess\connectionServer\drivers" and seems everything is fine. But still I am getting this error. One important point is we could use IDT because in IDT still we don't have option to connect with 'Microsoft Analysis Services - 2014 (XMLA)' as we are using Microsoft Analysis Services 2014 version.
Kindly help if anyone has faced the same problem with SAP BO 4.1.
Thanks and Best Regards,
GhosalHello Everybody,
The problem is solved now after installing "OLEDB drivers from SQL Server 2012 Feature Pack". We had OLEDB drivers that comes directly from SQL Server but that did not worked out in our case.
Thanks for your support.
Best Regards,
Ghosal
Maybe you are looking for
-
Printed colour is different between two elements both created in pages with the same colour
Hi There, I have been having some issues getting a text colour to match a logo (imported in pdf format) - While trying to discover what was happening I created a sample colour of (HSB 189 / 89 / 73) in pages and saved it in my colours palette to test
-
Hi, Would anybody please help me with this problem. I tried to execute java.exe with the command: java -Djava.library.path=E:\Program Files\Testing TestApp, it threw exception could not find the the path since there is a blank space between Program F
-
What is media management software?
Hi all, I am new to RMAN and I am a bit confuse about media management software that is required to backup to tape. What is it exactly? Is it a backup software like Veritas Backup Exec? Does Oracle provide the media management software on Oracle 9i?
-
Blue Hyperlinks... no!
Well, in the JEditorPane when setting a page url it always displays the links blue even though the page includes html code to display them in another color. How do you get rid of the blue crap?
-
Cisco Aironet 1252 AP Poor range
Hi, I have 6 no. 1252 access point installed in my college on different 6 floor they are configured different channels on respective AP and i have enabled 2.4 and 5 Ghz wireless setings with 5Ghz antena. but still i m not getting full range in fornt