SAP ECC 6.0 & BW/BI 7.0 Disk Image
Hi Experts,
I want to practice BI7.0, so I found this SAP ECC 6.0 & BW/BI 7.0 Disk Image
software available on ebay. Has anybody tried out and how does it work. Is it really good the IDES System to work on BI 7.0.
Please advise I am planning to buy it.
Thanks,
Prashant.
Hi,
Thanks for your suggestion, I tried so much to get the IDes system on service.market.place but the website doesnt navigates to this link as all.
The list of software components which are found are only these:\
ARIS for SAP NetWeaver
Job Scheduler (Full Version)
PLM Catia V4
PLM Integration Autocad
PLM Integ. Catia V5
PLM Integration I-DEAS
PLM Integration Inventor
PLM Integ. Pro/E 3.2
PLM Integ. Solid Edge
PLM Integ. Solidworks
PLM Integ. Unigraphics
SAP Best Practices
SAP Core CEE
SAP CProject Suite
SAP CRM
SAP Cryptographic Software
SAP Easy Document Management
SAP ERP
SAP GUI for Windows
SAP HR-CEE
SAP NetWeaver
SAP NetWeaver Rapid Installer
SAP PI
SAP R/3 Enterprise
SAP SCM
SAP SRM
Under this which has BI7.0 is it SAP Netweaver or SAP NetWeaver Rapid Installer
And also when I looked into it there are so many files. But I need the the files to install only BI 7.0. Please help me on this.
Thanks,
Prashant.
Similar Messages
-
Layout 2.00 com mensageria "Z" - Aplicação de Notas no SAP ECC
Olá pessoal,
Estou participando de um projeto para implementar a versão 2.0 do XML em um cliente que não tem a mensageria startard (GRC).
Já levantei as notas necessárias no SAP ECC (estão num total de 42).
A mensageria Z, muito semelhante do Acelerador/GRC pois também foi desenvolvida em uma instância SAP com o PI como integrador, deve trabalhar da mesma forma que o GRC no sentido de permitir o envio das duas versões (1.10 e 2.00) em paralelo através da configuração de Business Place no SAP ECC.
Minha dúvida é a seguinte:
Há algum impacto para as execuções na versão 1.10 se aplicarmos as Notas OSS no SAP ECC num primeiro momento e depois começarmos as adequações na mensageria?
Desde já agradeço,
DanielaOlá Daniela,
Aplicando as SAP notes, a estrutura do FM J_1B_NFE_XML_OUT (que é utilizado outras mensagerias - não SAP) é alterado com a inclusão de novos parâmetros de importação, porém estes são opcionais o que não irá impactar a solução de mensageria não standard.
Lembre-se também de não alterar a versão do XML (IMG: Cross-Application Components, choose General Application Functions --> Nota Fiscal --> CNPJ Business Places --> Define Business Places).
E caso as SAP notes relacionadas aos motivos de contingência estejam sendo aplicadas agora, será necessário que o funcional realize as configurações necessárias (motivos de contingência) conforme descrito na Note 1451966 - NF-e: contingency date, time and reason .
At.
David -
SAP (ECC 6.0) - Erro de rejeição (Engrenagem)
Boa tarde a todos,
Gostaria de compartilhar um cenário de erro ocorrido no ambiente de produção do cliente (pós-GoLive) onde implementamos recentemente Nota Fiscal Eletrônica.
Para um determinado cenário enviado para SEFAZ/SP foi retornado o código de erro 210 (Rejection: Invalid Receiver's IE), esta mensagem foi devidamente atualizada no GRC e no SAP (ECC).
O problema ocorreu justamente quando o usuário optou em ajustar o código de inscrição estadual do respectivo cliente deste cenário e logo após, selecionou o documento "rejeitado" através do monitor do SAP (J1BNFE) e executou a função "Enviar de Novo", a partir deste procedimento (incorreto), o monitor retornou uma sinalização de erro (bandeira vermelha) com a seguinte mensagem: "Enviada ao sistema de envios de mensagens (XI,....), sinalizou o campo status ação com uma "engrenagem", o campo SCS com o valor 0 "zero" e o campo Status Sist. Msgs. com o valor "G" (MS recebido; outro erro).
Conclusão, este processo encontra-se travado no ambiente de produção do cliente, impossibilitando qualquer ação de inutilização ou cancelamento.
Estamos cientes que o procedimento correto deveria ser: solicitar a inutilização deste documento e não enviá-lo novamente a SEFAZ/SP, após concluída a correção da inscrição estadual do respectivo cliente, no entanto, gostaríamos de obter alguma dica ou orientação de como proceder corretamente neste caso afim de corrigir este problema.
Desde já agradeço pela ajuda e gostaria também de parabenizar pelo espaço onde pude verificar que há muita informação útil para todos.
Att,
André TeixeiraOi Henrique,
Sim, o MSSTAT estava preenchido com "A" antes da tentativa de reenvio. Como a nota já havia sido rejeita pela SEFAZ/SP no nosso entendimento o usuário deveria:
1) Requisitar a "inutilização" desta NF-e;
2) Ajustar a IE no cadastro de cliente;
3) Executar novo faturamento para este cenário que automaticamente iria gerar uma nova NF-e para nova aprovação na SEFAZ/SP, seria este o procedimento?
Ao executar Send no menu NF-e apresenta-se a seguinte mensagem:
Novo status de comunicação de sistema "Enviada a sistema de envio de mensagens (XI,...)" não permitido p/SCS "Enviada a sistema de envio de mensagens (XI,...)" anterior
Nº mensagem J1B_NFE007
Vou conversar com usuário sobre a possibilidade de introduzir o status de erro manualmente (SE37).
Grato,
André Teixeira -
SAP ECC error:'Migration Monitor' exits with error code 103.
Hi All,
I am doing SAP ECC installation for windows 32 bit with MAXDB as backend.
I am stuck at the import ABAP.Getting error
ERROR 2008-08-08 16:10:53
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.
1) imort_monitor.java.log-->contains
java version "1.4.2_12"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_12-b03)
Java HotSpot(TM) Client VM (build 1.4.2_12-b03, mixed mode)
Import Monitor jobs: running 1, waiting 0, completed 18, failed 0, total 19.
Loading of 'SAPVIEW' import package: ERROR
Import Monitor jobs: running 0, waiting 0, completed 18, failed 1, total 19.
2)import_monitor.log
ERROR: 2008-08-08 16:10:36 com.sap.inst.migmon.LoadTask run
Loading of 'SAPVIEW' import package is interrupted with R3load error.
Process 'D:\usr\sap\EC6\SYS\exe\uc\NTI386\R3load.exe -i SAPVIEW.cmd -dbcodepage 4103 -l SAPVIEW.log -nolog -c 0' exited with return code 2.
For mode details see 'SAPVIEW.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
INFO: 2008-08-08 16:10:52
All import packages are processed.
WARNING: 2008-08-08 16:10:52
1 error(s) during processing of packages.
INFO: 2008-08-08 16:10:52
Import Monitor is stopped.
3)SAPVIEW.log
error message returned by DbSl:
(IMP) INFO: a failed DROP attempt is not necessarily a problem
(DB) ERROR: DDL statement failed
(CREATE VIEW "Z_T_CO_BW" ( "KOKRS" , "KOSTL" , "VERSN" , "KSTAR" , "WOG001" , "MEG001" ) AS SELECT T0002."KOKRS", T0002."KOSTL", T0001."VERSN", T0001."KSTAR", T0001."WOG001", T0001."MEG001" FROM "COSS" T0001, "CSKS" T0002 WHERE T0002."MANDT" = T0001."MANDT")
DbSlExecute: rc = 103
(SQL error -942)
error message returned by DbSl:
(DB) INFO: disconnected from DB
D:\usr\sap\EC6\SYS\exe\uc\NTI386\R3load.exe: job finished with 3108 error(s)
D:\usr\sap\EC6\SYS\exe\uc\NTI386\R3load.exe: END OF LOG: 20080808174211
Only SAPDB: SAPSID srvice of SAP DB is only up.
No other services of database are up.And i am not able to up the other services also.
Is it required to up the other services?
If not?
Why this error is occuring?
Any help will be appreciated.
Thanks&Regards
Manisha dasHello Manisha,
The one of the possible reasons for this is due to lack of H/W.
Increase your RAM size to atleast 2GB and utilise the same while you are installing ECC in database parameters step..
If the issue is with H/W, then this should fix the issue.
Hope it helps,
Regards,
Satish. -
RFC connection from SAP Data services to SAP ECC
We have data services set up in linux machine. I am trying to set up RFC connection between data services and SAP ECC.
From data management console after creating RFC connection i am getting "RFC_bad_connection" error message. Username , password, system number, hostname and client is working from SAP GUI and has all the authorizations. SAP gateway and service is name is correct.
Did anyone had similar issue and what was the solution. Do we have start the RFC connection from linux data services machine, i didn't see any sh executable to do so.
Thanks in advance for helping to solve the RFC connection issue.
Edited by: gupta sasha az on Dec 19, 2011 7:24 PMI am new to SAP and we have just started work on Data Services.
I wanted to know the complete procedure as in how can I establish a connection between Data Services and ECC.
Thanks for your help and time. -
Sap Ecc 6.0 Installation error in Import Java dump e
Hi Friends,
I got error in Phase 20 of 45:-
ERROR 2015-08-06 17:01:26
CJS-30049 Execution of JLoad tool 'E:\j2sdk1.4.2_12\bin\java.exe -classpath "E:\Program Files\sapinst_instdir\ERP\SYSTEM\ORA\CENTRAL\AS\install\sharedlib\launcher.jar" -showversion -Xmx512m com.sap.engine.offline.OfflineToolStart com.sap.inst.jload.Jload "E:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/install/lib/iaik_jce.jar;E:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/install/sharedlib/jload.jar;E:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/install/sharedlib/antlr.jar;E:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/install/sharedlib/exception.jar;E:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/install/sharedlib/jddi.jar;E:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/install/sharedlib/logging.jar;E:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/install/sharedlib/offlineconfiguration.jar;E:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/install/sharedlib/opensqlsta.jar;E:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/install/sharedlib/tc_sec_secstorefs.jar;H:\usr\sap\ECC\SYS\exe\uc\NTI386\ojdbc14.jar" -sec ECC,jdbc/pool/ECC,
ecc6/sapmnt/ECC/SYS/global/security/data/SecStore.properties,
ecc6/sapmnt/ECC/SYS/global/security/data/SecStore.key -dataDir E:/sap_kol/javacomponent\JAVA_EXPORT\JDMP -job "E:\Program Files\sapinst_instdir\ERP\SYSTEM\ORA\CENTRAL\AS\IMPORT.XML" -log jload.log' aborts with return code 1.<br>SOLUTION: Check 'jload.log' and 'E:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/jload.java.log' for more information.
ERROR 2015-08-06 17:01:26
FCO-00011 The step importJavaDump with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_Jload|ind|ind|ind|ind|9|0|importJavaDump was executed with status ERROR .
INFO 2015-08-06 17:16:48
An error occured and the user decide to stop.\n Current step "|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_Jload|ind|ind|ind|ind|9|0|importJavaDump".
Kindly help me!!
AnuskaHi Markus, Debashis , Uday and Friends,
I am currently Watching Thread.
Plz Help Me.
Regards,
Anuska -
SAP Personas using SSO to connect SAP ECC
Hi,
We configured SAP Screen Personas test landscape.
When I launch the mainapp page, the system is prompting for user credentials.
Then I get "System Selection" screen where the system I have configured (SAP ECC).
When I click on system backend, an new popup ask for user and password (SAP ECC credentials).
We are trying to understand if it is possible configure SSO to access ECC backend.
So, the ECC backend credentials will not be required anymore.
I am not sure if it is possible this configuration.
According SAP note 1684886 - License conditions of SNC Client Encryption, I think this scenario requires additional license.
Any help to resolve this is highly appreciated.
Best Regards,
Leonardo.The project requirement is avoid the user can log in with SAPGUI and run the standard transaction.
So, the user can log in only with SAP personas user/password and run the transaction on backend with a modified screen with the restrictions of authorization roles.
Regards, -
ITS is not working after the Upgrade to SAP ECC 6.0
Hi Folks
ITS is not working as it supposed to be after upgrading to SAP ECC 6.0
When I try to connect thru ITS i m getting HTTP 404 and HTTP 500 Errors
Can some one throw some ideas.
But web AS is running perfectly alright.
Thanks
JayHi Priya,
You need to Implement the following SNOTE's for these changes.
Union Budget 2015: As per Finance Bill 2015, the Government has implemented amendments to existing sections and introduced new sections in the Income Tax Act. Changes have been made in the following topics:
Tax Surcharge Rate
Increase in Conveyance Allowance
Section 80
Sukanya Samriddhi Scheme: The Government has launched this new deposit scheme for the minor girl child. This is a savings scheme that can be opened by the natural (biological) or legal guardian of a girl child aged below 10 years. Related Notes:
2139208 - Union Budget Changes – 2015
2138605 - Sec80C: Sukanya Samriddhi Scheme
Upcoming Developments:
PF Admin Charges Revision
Professional Tax for Mizoram & Nagaland states
Average Rate of Tax
Regards,
Venkat Polisetty -
SAP EarlyWatch Alert in SAP ECC and SAP PI
Hi Experts,
Every week in SAP EarlyWatch Alert report in PI as well as SAP ECC, shows PI consuming highest resource in SAP ECC by the SAPMHTTP.
Example as below:
Initial System
Initial Action
Total Resp. Time in s
% of RFC Load
Avg. Response Time
Avg. CPU Time
Avg. DB Time
Avg. Roll Wait Time
PI
SAPMHTTP
200.261
15,00
600,3
70,4
165,4
1,5
The total response time in SAP ECC by PI system is 200261 secs.
I have checked the interfaces which connects SAP ECC with RFC and calculated the processing time for all messages in PI. But that time is much less than the above total response time.
Can you please help me understand how to validate this with the messages that are getting processed through PI using RFC?
Thanks in Advance.Hello Pascal,
No There is no possibility to get the Diaglog response time and the number of users as similar to a ABAP EWA report in a JAVA EWA report.
This is because of the fact that the checks for both these system types are different.
Regards
Amit -
Using the Open Catalog Interface (OCI) between SAP-ECC 6.0 and SAP-MDM
Hello ASUG Community.
I'm working on an SAP-MDM project where we will configure the OCI interface between SAP-ECC 6.0 and SAP-MDM. The business requirement will be to punch out to SAP-MDM's catalog from SAP-ECC for expensed items (e.g., no material master record exists in SAP-ECC).
The data that will be returned to SAP-ECC will be purchase price info, material group, short text, & our global SAP-MDM item number.
The question I've been trying to design around is "where to store the SAP-MDM item number"?
I've looked into creating a custom filed on EKPO but now feel that a configured text field will be the best solution from an SAP-ECC point of view (less effort on the SAP-ECC side from a development perspective, no need to regenerate the EKPO table, etc.).
The question I'd like to pose to ASUG is.... Does anyone have experience or an opinion to offer using this functionality? It seems that I will have to code in a user exit or BAdi to insure that the SAP-MDM item numbers are returned to the appropriate text field on my POu2019s. Or can this be done using the standard OCI functionality?
I found OSS note 1347656 which references BADI "ME_CATALOG_INTERFACE" but I'm not sure if this right path to go down or if this would be the correct place to code non-conforming OCI mapping requiremetns.
Any insight would be most appreciated.
Thanks. Sincerely,
Rich WortmannI would suggest you create a new field for this as you may require thois going forward for reporting as well. Text fields are difficult to report.
Sorry not sure about the BADI to use. -
CJ20N is not working in SAP ECC 6.0
Hello Everybody.
In my SAP ECC 6.0 I log in SPANISH and launch tcode: CJ2ON - Project Builder and it transaction code does not work my session hangs and the message in the status bar is:
STARTING APLICATION PROJECT BUILDER (English)
Inicio Aplicación Project Builder (Spanish)
For my Customer is a must to use this tcode in Spanish. In English this transacction works fine.
Here the level components:
SAP_BASIS | 700 | 0006 | SAPKB70006 | SAP Basis Component |
SAP_ABA
700
0006
SAPKA70006
Cross-Application Component
PI_BASIS
2005_1_700
0007
SAPKIPYJ77
PI_BASIS 2005_1_700
ST-PI
2005_1_700
0002
SAPKITLQI2
SAP Solution Tools Plug-In
SAP_BW
700
0006
SAPKW70006
SAP NetWeaver BI 7.0
SAP_AP
700
0003
SAPKNA7003
SAP Application Platform
SAP_HR
600
0003
SAPKE60003
Human Resources
SAP_APPL
600
0003
SAPKH60003
Logistics and Accounting
EA-IPPE
400
0003
SAPKGPID03
SAP iPPE
EA-APPL
600
0003
SAPKGPAD03
SAP R/3 Enterprise Add-On PLM, SCM, Financials
EA-DFPS
600
0003
SAPKGPDD03
SAP R/3 Enterprise Defense Forces & Public Securit
EA-HR
600
0003
SAPKGPHD03
SAP R/3 Enterprise Add-On HR
EA-FINSERV
600
0003
SAPKGPFD03
SAP R/3 Enterprise Financial Services
FINBASIS
600
0003
SAPK-60003INFINBASIS
Fin. Basis
EA-PS
600
0003
SAPKGPPD03
SAP R/3 Enterprise Public Services
EA-RETAIL
600
0003
SAPKGPRD03
SAP R/3 Enterprise Retail
EA-GLTRADE
600
0003
SAPKGPGD03
SAP R/3 Enterprise Global Trade
ECC-DIMP
600
0001
SAPK-60001INECCDIMP
DIMP
ERECRUIT
600
0003
SAPK-60003INERECRUIT
E-Recruiting
FI-CA
600
0003
SAPK-60003INFICA
FI-CA
FI-CAX
600
0003
SAPK-60003INFICAX
FI-CA Extended
INSURANCE
600
0003
SAPK-60003ININSURANC
SAP Insurance
IS-CWM
600
0003
SAPK-60003INISCWM
Industry Solution Catch Weight Management
IS-H
600
0003
SAPK-60003INISH
SAP Healthcare
IS-M
600
0003
SAPK-60003INISM
SAP MEDIA
IS-OIL
600
0003
SAPK-60003INISOIL
IS-OIL
IS-PS-CA
600
0003
SAPK-60003INISPSCA
IS-PUBLIC SECTOR CONTRACT ACCOUNTING
IS-UT
600
0003
SAPK-60003INISUT
SAP Utilities/Telecommunication
SEM-BW
600
0003
SAPKGS6003
SEM-BW: Strategic Enterprise Management
LSOFE
600
0003
SAPK-60003INLSOFE
SAP Learning Solution Front-End
| ST-A/PI | 01H_ECC600 | 0000 | - | Application Servicetools for ECC 600
Have you experienced this issue, can you please give your ideas to solve it ?Hello,
SWUF is workflow runtime system administration? Seems it disappeared in 4.6 or 4.7.
Try SWDC_RUNTIME and SWDC_DEFINITION - not sure if they are in ECC6.
Let us know if this is the solution.
regards
Rick Bakker
Hanabi Technology -
How to trigger crystal report from SAP ECC
Hi All,
I hope i m right forum to ask this question.
we want to do label printing from Crystal reports. data will be present in SAP ECC .
So I below issues
1 ) how to connect SAP ECC database with Crystal Reports.
2 ) how to trigger print output in Crystal reports from ECC , lets say I create a Delivery In ECC , the print output will be issued to Crystal report and I should get a print out Immediately ( for printing - printer will be connected to local system and SAP network printer ) .
I have worked with this type of scenario in smarforms , adobeforms. but not with Crystal Reports ...
Regards
Yashpal Gupta.Hi Yashpal,
First thing you need to do is install the Connector on both your work station where you run Crystal Reports as well as the SAP Server where the data is.
So I moved your post to the SAP Integration Kit forum.
Need to know what version of Crystal Reports you are using?
Search of browse here, lots of info on how to...
Thanks
Don -
Hi All,
Please give the more Information on SAP ECC 6.0. I dont know any thing about this but have knowledge on SAP-ABAP, MM, ---etc. Please clarify below Questions
What is it. How it is work at Real Time.
Thanks,
DurgaHello Durga,
Please find the thread in which Nishant has explained very well.
SAP ECC 6.0
Hope this helps
Regards
Arif Mansuri -
How do we map this scenario in SAP ECC
Hi Gurus,
I need a help from you, to get your perspective on how the below mentioned business scenario can be mapped in SAP ECC.
Scenario: The client is engaged in a business of supplying surgical kits to hospitals. The surgical kit is actually a case with two shelve in it. Tray 1 holds the equipments for surgery and the Tray 2 holds the implants for surgery. There are various different kits depending upon different surgeries. Depending upon the need/demand from the hospital appropriate kit is sent to the sales rep, who then delivers the kit to hospital. Now when the kit is supplied to the hospital, the surgeon uses the equipments from Tray 1 to perform the surgery and consumes some of the implants (as needed) from Tray 2. Once the surgery is done, the equipments are cleaned by the hospital and the kit is sent back to the sales rep.
At this point the sales rep need to raise an invoice to the hospital for the implants that were consumed from the Tray 2 and also need to charge for the service for using the equipments. Both the equipments and implants have serial numbers and each kit has a serial number.
Ask from the business
1.They should be able to track which kits are out in the field and should be able to see the inventory within the kit.
2.Should be able to consume the implants from inventory, which have been consumed during surgery and raise an invoice to the hospital for consumed implants.
3.Business should be able to charge for the equipments used
4.They should be able to track the inventory in the kits
5.They should be able to depreciate the equipments in the kits.Hi,
You may please check in this forum
Also, please explore whether [IS-Healthcare|http://help.sap.com/content/documentation/industry/docu_is_health.htm] helps you finding a solution.
Regards,
P Gomatheeswaran -
Loading of transaction data from SAP ECC system failed
Hi!
I successfully connected SAP ECC system to SAP BI system.
The following steps have been executed:
- user ALEREMOTE with max. authorization
- RFC destination
- Distributing Data model
- Generated Partner profile
- Maintaining message types in WE20
Now when I try to load any data from SAP ECC system the loading process in hanging in status "yellow" and never comletes.
[0FI_AR_4|http://www.file-upload.net/view-1447743/0FI_AR_4.jpg.html]
The following steps within Load process are yellow:
Extraction (messages): Missing messages
Missing message: Request received
Missing message: Number of sent records
Missing message: Selection completed
Transfer (IDocs and TRFC): Missing messages or warnings
Request IDoc : Application document posted (is green)
Data Package 1 : arrived in BW ; Processing : 2nd processing step not yet finished
Info IDoc 1 : sent, not arrived ; Data passed to port OK
Info IDoc 2 : sent, not arrived ; Data passed to port OK
Info IDoc 3 : sent, not arrived ; Data passed to port OK
Info IDoc 4 : sent, not arrived ; Data passed to port OK
Subseq. processing (messages) : Missing messages
Missing message: Subseq. processing completed
DataStore Activation (Change Log) : not yet activated
Question:
Can some one give me some technical steps (tcode, report) to solve this problem?
Thank you very much!
HolgerHi!
Many thanks for your answer.
Via BD87 on BW system I detect that all the IDOC's (type: RSRQST) will be received from SAP ECC system.
Via tcode SM58 I could not detect any entries.
However the loading status from yesterday is set to "red".
The errors are:
Extraction (messages): Missing messages
Data Package 1 : arrived in BW ; Processing : 2nd processing step not yet finished
Info IDoc 1 : sent, not arrived ; Data passed to port OK
Info IDoc 2 : sent, not arrived ; Data passed to port OK
Can you investigate my issue again?
Thank you very much!
Maybe you are looking for
-
Report export to excel doesn't work correctly
I've seen this problem is quite common, and some workarounds but none is correct for me. I have a SQL function returning report with several filters (something based on the Issues report of the Issue Tracking Application, APEX example). In my case se
-
HT1751 Why can't iTunes handle a music library on an external drive?
I put all my music files on an external drive and imported them into iTunes. So far so good. The first time you run iTunes while the drive is disconnected - all your songs suddenly have that dreaded exclamation point next to them. Yes, while the driv
-
Got minus one from a read call error in ORACLE 11gr2 RAC
dear all, im facing typical issue in my newly built RAC enviornment (11GR2 on linux 64-bit). its a typical 2-node RAC setup. whenever application server trying to establish connection , im facing below error. Got minus one from a read call error. due
-
Effect of 'No update' for master data texts
Hello all, I am using flexible update - update rules - for master data text. I want to confirm effect of 'No update' in following scenario In the fisrt set of update rules -from first source system -I have mapped both short text and long text Key |
-
Hello people! When I try changing the background of LXDM, display manager, it won't change. I am following this guide: http://ubuntuforums.org/showthread.php?p=11557021. I also made sure the path is right. Thanks, and happy new year!