SAP EHP1 for Solution Manager 7.0 - Post Install Procedure

Hello Folks:
I completed Sol Manager 7.0 EHP1 installation on Win 2008 R2 with MS SQL in a sandbox environment. This is the first time I ever installed SAP on my own and i am in the process of performing post installation steps from Installation Guide.
In the install guide, there is no mention of creating a new client ex: 100. Could you please, provide a list of tasks that generally needed to perform after the installation is completed and before doing any configuration in Solution manager.
I have some very basic idea on the Basis but while going thru Installation Guide I am not sure if there any steps that generally need to perform to complete the installation.  My goal is to complete the Sol Mgr installation first and then start preparing for ECC 6.0 Installation.
Thanks a lot in Advance.

Hi,
First - the basic post installation steps are:
1. sick t-code need to execute
2. se06 --> Perform Post-Installation Actions
3. RZ10 --> Utilities --> Import profiles --> Of active servers
4. execute sgen T-code --> This will take some time
5. setup STMS
6. create client (If custom required)
7. Take backup of the system
For the solution manager client you could use the default created '001' client.
Next you need to run the solman_setup template which 'sets up' the SolMan for usage.
Follow config guide at: https://service.sap.com/~sapidb/011000358700000308502009E.PDF
For installing the ECC system, only a install key(from SMSY) is to be generated from SolMan. But if you want to use the SolMan effectively, suggest you to run the entire solman_setup.
Regards,
Srikishan

Similar Messages

  • Post Installation steps for Solution Manager 4.0

    Hi Experts,
    Please can you guide me if there are Post Installation steps for Solution Manager 4.0!If so can you explain me.I have successfully installed the SolMan 4.0.
    Thanks & Regards
    Sunil

    Hi
    In installtion guide you can find  the information you needed also check
    Visit for step by step details of Standard Configuration of Basic Settings
    www.service.sap.com/rkt-solman->select solution Manager 7.0>technical Role-->Technolagy
    &system administartion just drill out there you can find lot of simulator how to install and
    configure solution manager
    https://websmp109.sap-ag.de/~sapidb/011000358700000424922008E.sim
    https://websmp109.sap-ag.de/~sapidb/011000358700000525622007E.sim
    and for Maintenance optimizer setup
    https://websmp109.sap-ag.de/~sapidb/011000358700000086852008E.sim
    https://websmp109.sap-ag.de/~sapidb/011000358700000086862008E.sim
    Let me know if needed more information
    Regards
    Uday

  • Pagefile for SAP Erp2005 and Solution Manager 4.0

    Hi all,
    I've installed SAP ERP2005 and Solution Manager 4.0 on the same server with Windows 2003 Standard 32bit.
    The RAM on this server is 3325MB.
    How many paging file I must configure???
    At the moment I configured the pagefile size as defined in the installation guide:
    1 RAM + 8GB that is 12285MB.
    Is it correct????
    For both instance I set the PHYS_MEM parameter to 2328 (70% of the RAM)...is it correct??
    P.S. How to calculate the [BE] parameters??
    [BE] = maximum possible number of user calculated from the size of physical main memory
    Thanks in advanced
    Moreno

    I agree with Yaroslav,
    you should NOT set those values:
    em/initial_size_MB  |----    [PM]  |----    [PM]   |Mbyte     |
    |---    em/max_size_MB  |---    20000  |---   100000   |Mbyte     |
    |  em/address_space_MB  |-----    512  |-----   4096   |Mbyte     |
    |----  ztta/roll_first  |-------    1  |-------    1   |Byte      |
    |---    ztta/roll_area  |---  2000000  |---  3000000   |Byte      |
    |  ztta/roll_extension  |  2000000000  |  2000000000   |Byte      |
    |    abap/heap_area_dia  |  2000000000  |           2000000000   |Byte     |
    | abap/heap_area_nondia  |  2000000000  |           0  |Byte      |
    |  abap/heap_area_total  |  2000000000  |[PM]*1048576   |Byte      |
    |-    rdisp/ROLL_MAXFS  |  [BE] * 100   |  [BE] * 100   |8KB Block |
    |---    rdisp/ROLL_SHM  |  [BE] * 100   |  [BE] * 100   |8KB Block |
    |---    rdisp/PG_MAXFS  |---    32768  |---    32768   |8KB Block |
    |-----    rdisp/PG_SHM  | 
    so... that [BE] value is not to be used.

  • What are installations material for Solution Manager 7.0 EHP 1

    hi friends,
    we plan to do installing Solution Manager 7.0 ehp1,
    can any help me to get the path for installation media for Solution Manager 7.0 EHP 1 in service market place.
    thanks..

    https://service.sap.com/swdc
    ->  SAP Installations and Upgrades
    -> Installations and Upgrades - Entry by Application Group
    -> SAP Technology Components
    -> SAP SOLUTION MANAGER
    -> SAP SOLUTION MANAGER 7.0 EHP 1
    -> Installation and Upgrade
    Also check https://service.sap.com/instguides for the install guide and SAP Note 1276022 - SAP Solution Manager 7.0 EHP1
    Installation.
    Nelis

  • How to monitor all SAP Server through solution Manager?

    Dear Friends,
    How to monitor all SAP Server through solution Manager?
    Is it possible if yes then how? Please forward configuration and transaction also.
    Please help me as early as possible..
    Thanks,
    Regards,
    Sachin

    Hi sachin,
    You can monitor your sattilite systems through solution manager.
    If you want to monitor systems in solution manager means you need to configure those systems in solution manager.
    Before including the systems in solution manager we need to create a solution using tcode <b>DSWP</b>.
    After that you can include the systems using tcode <b>SMSY</b>.
    For configuring the systems we have lot of phases its very difficult to explain here.
    Try to login to<b> service.sap.com</b> and <b>help.sap.com</b> find the helpfull guides.
    i hope it will help you.
    any issues post it.
    kiran kumar.v

  • Wily Introscope Version for Solution Manager 7 SPS 17

    Hi
    We have a solution manager 4 (now 7) running on an ABAP stack only, this was recently upgraded from Solution Manager 3.2 which was installed 3 years ago as ABAP stack only, this server was never powerful enough to have the Java stack added and the project did not require it.
    I am now looking to migrate this ABAP Solution Manager 7 to a new server, using ABAP & JAVA so I can make use of Solution Managaer tools like Diagnostics, RCA, WILY etc.
    On a sandpit copy I have migrated the ABAP instance to a more powerful server and added the Java Instance from the Solution Manager 4 Installation Master, so I now have a dual stack SM 4, I have patched this to SP17.
    I am looking to install Wily Introscope for monitoring, I have read Note 797147 - Wily Introscope Installation for SAP Customers, where it says you should always use the latest version of Wily, which is 8.0.2, but looking at the note, the downloads for Introscope Enterprise Manager and Introscope Workstation are from SAP SOLUTION MANAGER 7.0 EHP 1, but I am not running Solution Manager on EHP1, I am on SP Stack 17.
    Looking in the SWDC there are downloads in  SAP SOLUTION MANAGER 7.0 -> Entry by Component -> Solution Manager JAVA Stack -> WILY INTROSCOPE ENTPR MGR 8
    Is this what I should be using for my SP Stack 17, or should I use the EHP1 version?
    Also, setting up the Solution Manager Diagnostics, is there a setup PDF for Solution Manager 7 SP17 ? I cannot find a setup guide for this release, most are for EHP1, I would rather not have to implement EHP1 as part of this migration !
    Thanks for any help.
    Paul.

    Hi Bhudev
    Thanks for the reply, I presumed it was the Wily introscope 8 without the EHP1 I required.
    As for installation guide, I have think you have misunderstood my question, I already have the wily installation guide from the note location, I wanted to know if there is any Solution Manager Diagnostics setup guides for SP17 ?
    When I use transaction SOLMAN_WORKCENNTER --> System Monitoring --> Solution Manager Diagnostics --> Diagnostics System --> Diagnostics Setup --> Setup Wizard
    the first 2 (of 23) setups are failing :
    SSO The value of profile parameter login/accept_sso2_ticket could not be checked
    BI Cannot invoke CCMSBISETUP on host localhost
    Warning :
    User(BI) Role SAP_BI_E2E does not exist
    Then it says :
    To complete the Diagnostics Setup, you should perform the following operations as documented in Diagnostics Setup Guide
    I cannot find this Diagnostics Setup Guide for SP17 ?
    The installation guides are mainly for EHP1, media library under sap-ag.de/diagnostics does not show this setup guide, Master Installation guide does not mention it, so was wondering if anyone could point me in the right direction for this guide ?
    Thanks,
    Paul.

  • Looking for Solution manager SMI310_04 material

    Can anyone please send me the solution manager material SMI310_04. I really appreaciate your help on this. I have an assignment at my work place to configure the SM.

    Hi Ram,
    If u r looking for Installation guides they are availoable at the following location.
    https://websmp108.sap-ag.de/solutionmanager
    Elese if u r looking for some scenario setup like service desk and CM, i hope its a small big fight.
    But i suggest you check out the RKT roadmap as i am sure they would be hepful in ur activity.
    http://service.sap.com/rkt --> Solution manager
    If u have any specific requets other than this do post out so that i can help in any possible views formmy side.
    If this info is helpful, please award points.
    Bet Regards
    Sri

  • ERROR while CREATING RFC FOR SOLUTION MANAGER DIAGNOSTICS

    Dear all,
    Hi,
    I am configuring solution manager 7.0.
    In SPRO>basic setting >operation>solution manager diagnostics > create RFC for solution manager diagnostics i am getting this error
    program WEBADMIN not registerred.
    can any one tell me how to register this program in sap gateway.
    best regards
    azeem

    Hi Azeem,
    Just before creating the rfc connection do this step.
    Set-Up Solution Manager Connection to Solution Manager Diagn
    Use
    Check the connection to function Solution Manager Diagnostics.
    Default Settings
    The function Solution Manager Diagnostics is installed on the Java instance of the Solution Manager system by default.
    Activities
    If the default values are correct, save the settings.
    To run the Solution Manager Diagnostics in another system, enter the required data and save.
    Also check that your java is active.
    Regards
    Ashok

  • Problem in installation of Business Content for Solution Manager

    Hi all,
    I have a problem while trying to install the Business Content for Solution Manager. In detail, I cannot install/ see the Process chains. I am not much familiar with Business content installation, so maybe I missed and /or some step.
    Following the instructions from SAP IMG (SPRO/ SAP IMG / Solution Manager / Configuration / Scenario-specific settings / Solution monitoring / BI Reporting / BI Client) , I activated the Datasource 0SM_SMG_ROOT , performed all the steps and installed all the relevant Business Objects  (Infoobjects, Datasources, Infocubes, Infopackages, etc.). All the objects seen from transaction RSA1 seem correctly installed and activated.
    The last step is the installation/activation of the Process chains. This step is executed, but the installation job terminates with messages like  “Infopackage 0SM_XXXX does not exist in D version; activation not possible”. It seems like Process chains are looking for some Infopackage, and these are not present. They are not present indeed, and I don’t know why. The result is that no Process chain is visible from transaction RSPC.
    Am I missing some step, or doing a wrong/ incomplete procedure ?
    Thanks a lot

    HI Saravanan,
                  For Solman Service Desk, the following objects are used :
    Cube : 0CSRV_C01
    DSO  : 0CRM_PROH
    DataSource  :  0CRM_SRV_PROCESS_H
    And apart from this there are some MD datasources, for BPARTNER, USER STATUS, CATEGORY etc.
    Regards
    Mahesh Kumar

  • Process for applying for Solution Manager Key?

    I have to install a NW2004s system in a AIX Machine.
    I understand that i need a solution manager key for installation. We dont have solution Manager installed in our Landscape. But i came to know that i can request for a solution manager key from SAP
    Please let me know the website, process for applying for Solution Manager key

    Balaji,
    This is interesting, SAP is pushing customers to have solution Manager installed with features like Solution Manager Key, Maintainance Optimizer etc. It will get difficult for customers who do not have solution Manager running on their site.
    You will have to create support message under the component XX-SER-SMKEY and request for solution manager key, provide them all the details of your system.
    Cheers,
    Nisch

  • Third-party tools  for solution manager

    Hi all,
    Im new for solution manager a i just  want to know whats SM tools and whats the third-party tools integrate and interface with SAP Solution Manager and if will be more third party tools??  ( Whats the add on tools SM have??)
    regards
    Tim

    Hi Murali Narayanan   
    If you wan to achieve monitoring from technical perspective, the way that was introduced by shivjansi might be the option.
    If you want to check the entry of specific table in stand alone MSSQL to ensure the business process that use MSSQL
    stand alone DB, you can use BPMon remote DB monitoring that enables monitoring of non ABAP/ non SAP that supported
    by netweaver like MSSQL, Oracle, DB2.
    By using this function, you can monitor the entry of your stand alone SQL server.
    For example, stand alone SQL Server has some table that contains some error,
    or there is  application table and in one row that it indicates error or  completeness.
    Now if you want to check these error document or incomplete document  in the DB,
    you can use BPMon remote DB monitor.
    By monitoring this, you can ensure whether there is issue in your business or not.
    You can find out how to setup from following link.
    http://service.sap.com/bpm
    ->technical detail ->Setup Guide for non-ABAP/non-SAP
    P14 (The monitoring object u201CGeneric Table Entry Counter for remote DBu201D (NATABCNX) )
    is related description.
    (In the document, it also introduce some other way using web service).
    Also in same link, you can find out other document like how to setup BPMon.
    Also there is some blog about table entry counter. it is for SAP ABAP system.
    But the function is more or less same for remote DB.
    So you can also check following blog to have more understandable image.
    /people/volker.vongloeden/blog/2010/07/16/create-your-own-customer-specific-key-figure-for-business-process-monitoring-within-5-minutes
    Best Regards
    Keiji

  • Language Import for Solution manager

    Hello All,
    I have a simple query regarding solution manager 7.0 language import using SMLT.
    I have a requirement where my Poland users need to use solution manager in polish language.
    The problem I am facing is that I am not able to find POLISH language import on service market place.
    Could some one please help me find the polish language import for solution manager 7.0.
    Eagerly awaiting your reply.
    Regards,
    Gurudath Pai

    Dear customer
    Polish isn't a supported language. Check service.sap.com/pam
    Chinese       Released       16.12.2005       Released       16.12.2005              
    English       Released       16.12.2005       Released       16.12.2005              
    French       Released       16.12.2005       Released       16.12.2005              
    German       Released       16.12.2005       Released       16.12.2005              
    Hebrew       Released       16.12.2005       Released       16.12.2005              Comment
    Japanese Released       16.12.2005       Released       16.12.2005              
    Korean       Released       16.12.2005       Released       16.12.2005              
    Portuguese Released       16.12.2005       Released       16.12.2005              
    Russian       Released       16.12.2005       Released       16.12.2005              
    Spanish       Released       16.12.2005       Released       16.12.2005

  • HTTP Connection for Solution manager

    Dear Experts,
    SAP support team asked to create a http connection for solution manager for service check.We already created a R/3 connection for solution manager.why they are asking for HTTP connection? Really they required HTTP connection ?,Is they are any problem with this type of connections.What are the transaction codes which are not run in SAP GUI. Please clarify my doubts.
    Thanks and regards,
    Patan Thavaheer.

    Hi Patan,
    Solution Manager transaction codes open in http browser. You can check the behaviour yourself by making a login to solution manager and execute transaction code solman_setup.
    For SAP support to open http browser within remote support, they need to have http connection opened along with HTTP url maintained.
    Refer to the SAP help link above for the procedure.
    Hope this helps.
    Regards,
    Deepak Kori

  • CRM Content for Solution Manager

    Does anyone have an idea where i can find the CRM 7.0 Content for Solution Manager?
    I tried looking under: Downloads - SAP Software Distribution Center as well as Release and Upgrade Info with no luck.
    Please help.
    Kind Regards
    Felix

    >
    felix chabeli wrote:
    > Does anyone have an idea where i can find the CRM 7.0 Content for Solution Manager?
    >
    > I tried looking under: Downloads - SAP Software Distribution Center as well as Release and Upgrade Info with no luck.
    Do you want to implement CRM 7.0 with the help (project, Business Blueprint, Configuration) of a SAP Solution Manager system?
    If yes, you can browse through the [Available implementation content|https://implementationcontent.sap.com/bpr]
    The content is shipped via add-on ST-PI and its support packages.
    Relevant transactions: SOLAR_PROJECT_ADMIN, SOLAR01, SOLAR02
    Regards,
    Ruediger

  • Proocess flow for solution manager

    hi friends,
    could you please provide pictorial representation for solution manager tool in  sap(used in support project)
    would be appriciated,
    Regards,
    divya

    Evaluation?
    If you are a licensed SAP customer you can get SolMan for no cost.
    Markus

Maybe you are looking for

  • Printing report to direct print 9i

    Hi, I am able to direct print the reports on web using normal parameters...i.e. desname, destype and desformat. When it prints successfully, it gives us a message in a separate browser window "The report has been successfully printed out" And we don'

  • [JS][CS3] Script deployment question

    Hi everyone, I am currently writing scripts in a corporate environment (~30 users), and I'm contemplating the easiest and most efficient way of deploying the scripts. We have a couple of scripts already with the users that are located locally on thei

  • RETURNING CLAUSE ERROR

    Hi All, I was trying to use RETURNING CLAUSE into pl/sql process but it gives error as :- "1 error has occurred * ORA-06550: line 12, column 13: PL/SQL: ORA-00933: SQL command not properly ended ORA-06550: line 6, column 3: PL/SQL: SQL Statement igno

  • Best fit curve (gaussian)

    I am having an issue implementing the gaussian best fit line on the data in the attached vi. How can i get this done? Will appreciate any help! -FredFred Attachments: best fitvi.vi ‏58 KB

  • OBIEE Avg Issue on Grand Total

    Hello Experts, I'm having an issue while calculating the grand total for the AVG measure.This is the scenario 1)I have the show count for  the top three tiles for the rolling 13 weeks and only for the weekends and for a particular group of theaters.I