SAP GRC 10 - Field Mapping

Gurus,
we have defined field mapping for User type but when request got closed ....still its provisions user type "dialog" , But i have selected user type as "service" in request .
And also define field mapping  for user type AC custom field with system field name USTYP and table is IS_LOGONDATA  @Governance, Risk and Compliance >Access Control>Maintain Mapping for Actions and Connector Groups.
Please let me if I am missing any configuration for field mapping.
Thanks,
Jagat

Hello Aman,
Thanks for the reply.
As per my knowledge there is no direct way or configuration in GRC10 for provisioning the non-dialog useru2019s , So thatu2019s why we have created Custom field and map this field to Su01 field in SAP.
FYI u2026.We did all the configuration related to field mapping u2026but still by default itu2019s taking user type as dialog. Do you know any SAP Note related field mapping released by SAP for GRC10.
Thanks,
Jagat

Similar Messages

  • SAP GRC 10.1 AMF No data selected when adding duplicate fields from separate tables for configurable data sources

    Hi There,
    In SAP GRC 10.0, our team had an issue where we could not add duplicate fields from separate table (see ERROR: Select Currency/UoM field for the selected analyzed fields). This was resolved by the SAP Note 1904313/ 1904314 (http://service.sap.com/sap/support/notes/1904313).
    We upgraded our system to SAP GRC 10.1 SP05 and could now add the duplicate fields from separate tables. SAP Note 1904313/ 1904314 was part of SAP GRC 10.1 SP03 so it makes sense that we, in a higher version (SP05), would be able to do this.
    The issue now is when we add the duplicate fields from different tables and run the Ad-hoc Query to test if the data source works correctly, the No Data Selected warning persists. This means that the data source provides no data for analysis, which is required to write our business rules.
    Below is an example:
    Basic data source with just one currency reference field EBAN-WAERS.
    When you run the Ad-Hoc Query you receive data.
    Basic data source with second currency reference field EKKO-WAERS.
    When you run the Ad-Hoc Query no data is found.
    Please also make reference to the following thread logged by my colleague (ERROR: Select Currency/UoM field for the selected analyzed fields)
    Any assistance to receive data with duplicate fields from separate tables will be highly appreciated.
    Thanking you in advance.
    Regards
    Gary Khan

    Hi
    following are the  error messages from dump
    hrtText
       There is already a line with the same key.
    hat happened?
       Error in ABAP application program.
       The current ABAP program "SAPLCKMS" had to be terminated because one of the
       statements could not be executed.
       This is probably due to an error in the ABAP program.
    rror analysis
       You wanted to add an entry to table "\FUNCTION-POOL=CKMS\DATA=T_DYN_CKMLCR",
        which you declared
       with a UNIQUE KEY. However, there was already an entry with the
       same key.
       This may have been in an INSERT or MOVE statement, or within a
       SELECT ... INTO statement.
       In particular, you cannot insert more than one initial line into a
       table with a unique key using the INSERT INITIAL LINE... statement.
    rigger Location of Runtime Error
       Program                                 SAPLCKMS
       Include                                 LCKMSF01
       Row                                     226
       Module type                             (FORM)
       Module Name                             DYNAMIC_PERIOD_CLOSING
    Source code where dump ocured
    222
    223           APPEND ht_ckmlpp TO t_add_ckmlpp.
    224           APPEND LINES OF ht_ckmlcr TO t_add_ckmlcr.
    225           INSERT ht_ckmlpp INTO TABLE t_dyn_ckmlpp.
    >>>>           INSERT LINES OF ht_ckmlcr INTO TABLE t_dyn_ckmlcr.
    227         ENDWHILE.
    Also I guess there is problem with material ledger in R/3 side
    I have never worked on material ledger before so dont hav idea of Tcode and tables in SAP R/3 for material ledger.
    Thanks
    Navneet

  • Add Fields in CUP Request - SAP GRC Access Control 5.3

    Dear Friends,
    I am wondering on how to add fields value in CUP (Compliant User Provisioning) SAP GRC AC 5.3.
    Currently i'm leading 9 SAP Security Coordinators in Indonesia and i want to create Performance Metrics on how long the CUP Requests is processed. It needs to enhance the CUP by adding value Delegation of Authority and the record no. of the DOA requests.
    Really appreciate your inputs on how to add fields value in CUP.
    Thank you so much
    -Mesti-
    Edited by: AnnisaPramesti on Jan 2, 2012 5:37 PM

    Hi.
    Check under http://service.sap.com/instguides
    SAP BusinessObjects -> SAP BusinessObjects Governance, Risk, Compliance (GRC) -> Access Control -> SAP GRC Access Control 5.3
    Cheers,
    Diego.

  • Catalog integration in MM (html - SAP-field mapping)

    Hi Experts! When integrating Catalog with MM (ME21N and ME51N), the only customizable entry in the IMG is the call-structure. Anyone who knows the transaction codes  / tables for HTML-SAP-field mapping (OCI) for this scenario ?? (For PM/CS/PS-orders this is available, but I have not managed to find this for MM)...
    brgs ziggy

    to pull Metadata from CMS repository into MM, you will have to configure the CMS Integrator and run that CMS Integrator, this you can do from the CMC
    as Werner mentioned SAP BW Integrator is being added for next MM release
    its not possible to import Metadata from Excel Sheet into MM, you will need a Integrator to do that, MM supports Integrator for CMS, Data Services, RDBMS, and there are few more Integrators that are provided by MITI (it requires a separate license)
    I don't think it will be possible to mimic the impact and lineage

  • SAP Field Mapping to I-Doc INVOIC

    Hi,
    I am looking for a documentation of mapping for I-Doc INOVICE02. Would like to know which SAP Standard fields (VBAP, VBAK) are going to be mapped in which I-Doc Segment, field for INOIVCE (Outbound).
    Does anybody know where I can find this?
    Thanks and best regards
    Isabella

    Hi Isabella
    I've just been through the same exercise, although with a different idoc/tables.
    The best advice I have is that if the segment field name is the same as the table field name, then you've found a match.
    It's a bit hit and miss, I know, but I couldn't find a neater way.
    James

  • LDAP Field Mapping in 4.6C - Using WebAS 6.10+ as an LDAP Gateway

    Dear All,
      We have a need to enable CUP Functionality (we use GRC AC 5.3) for one of our oldest R/3 systems - on 4.6C. All other R/3 backends are on 4.7+ releases, so it's a multiple backend configuration for GRC AC.
      However, LDAP Field Mapping functionality is missing in 4.6C. It was enabled through LDAPMAP in the higher releases only.
      At the same time, I discovered in one SAP HR document a diagram, which shows that indeed 4.7+ can map and post data directly to LDAP, but for 4.6C and below you can use WebAS 6.10+ as an LDAP Gateway. Meaning that 4.6C calls through RFC some functions in the higher release R/3 system to use its functions for Field Mapping and further transfer of user data to the target LDAP server.
      But... I can not find anywhere how to configure 4.7 / 6.0 servers to act as an LDAP Gateway for the older 4.6C server to bypass its limitation - absence of built-in LDAP Field Mapping functionality.
      Advice on how to realise this concept will be highly appreciated.
    Thanks,
    Laziz

    Hi,
    In order to migrate users, groups and password you have to use the command ldapaddent as you did with this sintax:
    # ldapaddent -D "cn=Directory Manager" -w secret -f /etc/group group
    # ldapaddent -D "cn=Directory Manager" -w secret -f /etc/passwd passwd
    # ldapaddent -D "cn=Directory Manager" -w secret -f /etc/shadow shadowNote that you must use passwd instead of people container.
    I suggest you to check this article from BigAdmin http://www.sun.com/bigadmin/features/articles/nis_ldap_part1.jsp
    G.

  • CUP - field mapping from request to SU01 for Accnt No worked only once

    CUP - field mapping from request to SU01 worked only once. I configured the Field Mapping for Account Number with Account Id. First request worked fine in DEV systems, 2nd and 3rd requests failed. Same thing happened in QA systems. Not sure whether the difference in SP on GRC and ECC is causing this. Any help is greatly appreciated.
    We are currentky on GRC 5.3 ABAP stack SP 14.0  
    and
    ECC - SAPK-53315INVIRSANH VIRSANH 530_700: Support Package 0015
    Any help is greatly appreciated.
    Thanks,
    Vish

    Hi Diego,
    Yes, we are on VIRSANH SP15  also VIRSAHR SP13 for SAP_HR . My connector type is SAP HR System, Version ECC 6.0.
    We are on GRC 5.3  Support Pack 14.0 . Our GRC 5.3 installation is running on ABAP stack.
    It is very strange that in QA client, SU01 got updated atleast 3 times with new account number , user group. Tried 4th time, did not work. In DEV client, it worked only once.
    Thanks,
    Vish

  • SAP GRC NF-e 10.0: Erro na interface NFB2B_procNFe_IB (contendo CDATA)

    Olá a todos.
    Poderiam por gentileza me ajudar com a questão abaixo?
    Estou com o seguinte problema na interface NFB2B_procNFe_IB do SAP GRC NF-e 10.0 (Support Package 15):
    Recebemos uma série de XML's de montadoras de automóveis que contém informações adicionais nas tags <infAdProd> e <infCpl>, como por exemplo:
      <infAdProd>VLR. PIS R$ 6,81 VLR. COFINS R$ 31,44<![CDATA[<ID ITEM=005115/><PED=4500159772/> <UM=PC/>]]></infAdProd>
    Porém ao inserir essa mensagem na interface NFB2B_procNFe_IB, a interface interpreta da seguinte forma:
        <infAdProd>VLR. PIS R$ 6,81 VLR. COFINS R$ 31,44
          <![CDATA[
            <ID ITEM=005115/>
            <PED=4500159772/>
            <UM=PC/>]]>
            </infAdProd>
    Sendo assim, ocorre o erro abaixo:
    <nm:ExchangeFaultDataExt xmlns:nm="http://sap.com/xi/NFE/common" xmlns:prx="urn:sap.com:proxy:NED:/1SAI/TAS8DFA2846CCAA9B6570C6:702">
      <faultText>Erro durante a transformação: Fim de elemento '{http://www.portalfiscal.inf.br/nfe}infAdProd' esperado programa: /1SAI/SAS6F90159886715E7C4560 caminho: nfeProc(1)NFe(1)infNFe(1)det(4)infAdProd(3)ID(1)</faultText>
      </nm:ExchangeFaultDataExt>
    Sei que temos algumas opções como:
    1. Alterar o XML no mapping do PI; (Funcionaria com mensagens processadas através do PI, mas não conseguiria inserir um XML manualmente via SE80)
    2. Alterar o XML no ABAP ao executar a classe /XNFE/CL_006NFB2B_PROC_NFE_IB; (Fazer algum replace nesses caracteres "<" e ">" por "&lt;" "&gt;"
    Mas como fazer isso sem danificar a assinatura do XML que já está assinado e autorizado na SEFAZ?
    Existe alguma nota SAP para corrigir esse problema?
    Agradeço desde já a atenção.
    Rodrigo Costa.

    Felipe,
    também tive o mesmo problema do lado do NTB2B_procNFe_OB. Tentei de várias formas transformar o XML para ficar aderente ao cliente, porém o PI sempre alterava o XML (possivelmente devido ao encoding).
    Vi muitos posts sobre o tema, mas ainda quando era o GRC NF-e 1.0, com a assinatura no Java. Para o GRC 10.0 não funciona, pois quando o xml chega no PI, o mesmo já está assinado, portanto não se pode alterar nada.
    A solução foi para nesses casos específicos enviar o xml através do ECC mesmo.
    Mas para o NFB2B_procNFe_IB ainda sem solução.
    Abs.
    Rodrigo.

  • SAP SP necessária para suportar os componentes para o SAP GRC NFE 1.0 no XI

    oi,
    Como estamos atualizando as nossas caixas de XI de SAP XI SAP PI 3.0 para 7,11, verificando o SLD notamos que Nota Fiscal componente de software está disponível. Assim, a pergunta é o que é que os Service Packs do sistema fonte precisa ter, a fim de fornecer todos os componentes necessários para a NF-e?
    temos dois sistemas de fonte da qual enviamos os dados para XI, você pode sugerir o que é o pacote de serviços adequados para apoiar SAP GRC NFE 1.0 no XI
    1> 6,0 SAP ECC, SP, 14
    EHP 2, Nível 2
    PI_Basis = 2005_1_700, Level 14
    ST = PI 2008_1_700 Nível 2
    2> 6,0 SAP ECC, EHP 4
    Muito obrigado

    Ola, vi o seu e-mail mas resolvi responder por aqui!
    Na realidade, se voce for realmente trabalhar com o GRC, dependendo da secretaria da fazenda que voce ira trabalhar aconselhor que voce aplique o sp15 no grc, consule SAP Note 1487119, nessa nota haverao todos os procedimentos necessarios.
    Como haviamos falado anteriormente por e-mail, seria necessario, caso vc realmente queira trabalhar com o GRC a aplicacao de algumas notas tecnicas no proprio GRC.
    1477834     XML Layout Version 2.00: Missing parameters in NF-e BAdI
    1487119     SAPK-10015INSLLNFE: Support Package 15 for SLL-NFE
    1496216     Rejection of NFe because of wrong data type of date fields
    1499921     Problem with validation after implementing SP15
    1498700     Problem on signing NF-e
    1497767     Fill field qTrib for new layout version 2.0
    1500046     Upgrade validation rule for field ID for version 2.0
    1500742     Adjust validation for field NADICAO and NSEQADIC layout 2.00
    1501545     Problems in trying to see a XML in the IE
    1502612     Select the NFe Status Check Service for Incoming B2B message
    1502217     Extend validation rules for <DI>/<adi>, layout 2.00
    Sem mais, precisando me mais ajuda avise

  • Offline Form Issue in SAP GRC System

    Experts:
    I am working on creating a Offline Form for GRC Process Control  in SAP GRC System. I have couple of doubts.
    1. In the Form property, there is a new field call 'Inbound Handler'.    The document which I referred says  that, this 'inbound handler' helps in processing the inbound pdf's which comes thro mail.       In this place we need to select the class developed with 2 methods, 1.Create Instance and 2. Handle PDF.    And the document also talks about creating a separate class and referring it in the exit rules (SO50).     I am not sure whether Inbound Handler is a replacement for Exit Rules (SO50) so something else.  Please Clarify.
    2. While generating the PDF file, as you know we call the series of function modules. I have problem with the FM ' CALL FUNCTION fm_name' . When this FM is executed,  normally it should generate the PDF and XML which will be available in fp_formoutput-pdf and fp_formoutput-xml.  But in this system even when there is no issues with the export parameters, the FM is not able to generate the PDF and XML. Both fp_formoutput-pdf and fp_formoutput-xml are coming as EMPTY. Result of which when the FM 'FP_JOB_OPEN' is called it displays the message 'No Job Started' and exits the program.  This same program works find in ECC 6.0 system. Can anyone thro some light on this?
    TYPES: BEGIN OF st_test,
           one   TYPE string,
           two   TYPE string,
           three TYPE string,
           END OF st_test.
    DATA: it_test TYPE st_test  OCCURS 0.
    DATA: wa_test TYPE st_test.
    DATA: fp_outputparams type sfpoutputparams.
    DATA: fm_name TYPE rs38l_fnam.
    DATA: fp_docparams TYPE sfpdocparams.
    DATA: result TYPE sfpjoboutput.
    DATA: fp_formoutput type fpformoutput.
    SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-b02.
    PARAMETERS: p_taskid TYPE grfntaskplan-taskplan_id DEFAULT 'DF492600B7308BF19F5E00237D624FE0' OBLIGATORY,
                p_email  TYPE ADR6-SMTP_ADDR DEFAULT 'a@b' OBLIGATORY,
                p_tmail  TYPE ADR6-SMTP_ADDR DEFAULT 'a@b'' OBLIGATORY,
                p_form   TYPE fpwbformname   DEFAULT 'ZAOF_TEST',
                p_langu  TYPE spras          NO-DISPLAY DEFAULT 'EN',
                p_countr TYPE land1          NO-DISPLAY DEFAULT 'US',
                p_pages  TYPE fppagecount    NO-DISPLAY DEFAULT 2,
                p_loop   TYPE i              NO-DISPLAY DEFAULT 1.
    SELECTION-SCREEN END OF BLOCK b1.
    INITIALIZATION.
    START-OF-SELECTION.
    wa_test-one = 'One'.
    wa_test-two = 'Two'.
    wa_test-three = 'Three'.
    append  wa_test to it_test.
    END-OF-SELECTION.
    CALL FUNCTION 'FP_FUNCTION_MODULE_NAME'
      EXPORTING
        i_name     = p_form
      IMPORTING
        e_funcname = fm_name.
    fp_outputparams-getpdf = 'X'.
    fp_outputparams-nodialog = 'X'.
    CALL FUNCTION 'FP_JOB_OPEN'
      CHANGING
        ie_outputparams = fp_outputparams
      EXCEPTIONS
        cancel          = 1
        usage_error     = 2
        system_error    = 3
        internal_error  = 4
        OTHERS          = 5.
    IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
          WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
    DO p_loop TIMES.
      fp_docparams-langu   = 'E'. "p_langu.
      fp_docparams-country = 'US'."p_countr.
      fp_docparams-FILLABLE = 'F'.
      fp_docparams-dynamic = 'X'.
      fp_docparams-UPDATE_INTERACTION_CODE = 'X'.
      CALL FUNCTION fm_name
        EXPORTING
          /1bcdwb/docparams  = fp_docparams
          Ztest      = it_test
        IMPORTING
          /1bcdwb/FORMOUTPUT = fp_formoutput
        EXCEPTIONS
          cancel             = 1
          usage_error        = 2
          system_error       = 3
          internal_error     = 4.
    ENDDO.
    CALL FUNCTION 'FP_JOB_CLOSE'
      IMPORTING
        e_result       = result
      EXCEPTIONS
        usage_error    = 1
        system_error   = 2
        internal_error = 3
        OTHERS         = 4.
    IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
          WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
    Thanks in Advance
    Vijai
    Edited by: Thomson VijaiAnand on Apr 21, 2010 11:15 AM

    Hi Thomson 
      I met a similar probleam.
      Could you explain how you get it through?
    Thanks

  • InfoObject to R/3 Field Mapping

    Does anybody know of a list that shows the standard Business Content InfoObjects and what they typically are mapped to in R/3?
    The reason is that I want to use the standard InfoObjects wherever possible without creating new ones unnecessarily.
    As an example of a small part of what I'm looking for, see the list below.
    0CUSTOMER                  KUNNR
    0DOC_NUMBER              VBELN
    0SALESORG                  VKORG
    Also, having something like this for CRM would also be helpful.
    Thanks!

    There really isn't any good BI Content to R3/ECC field mapping available. Using the SAP Help Portal and BI Content are the best ways to assimilate the "tribal knowledge" for this.
    Additionally, a single R3/ECC data element can map to multiple InfoObjects in SAP BW. For example, in your short list of mappings, you have VBELN mapped to 0DOC_NUMBER. This mapping is only good for Sales Orders, because VBELN is also mapped to 0BILL_NUM (Billings) or 0DELIV_NUMB (Delivery). Same for KUNNR, that can map to 0CUSTOMER but can also be mapped to 0BPARTNER (Busness Partner - there are multiple iterations of this based on subject area / application component).

  • Mitigating Control creation and application in SAP GRC 10

    Hi Expert,
    We have SAP GRC Access Control 10 being implemenmted for our client.  While trying to create Mitigating Control, we just realized that Before creating mitigating controls you need to create a Root Org entry, this replaces the Business Units in previous AC versions which is visible only when we activate the GRC-PC Application.
    My queries are:
    1. Is it that Mitigation control can only be created if PC is enable.
    2. What about Licencing if GRC-PC Application is used for Mitigating Control Creation.
    Thanking you i advance.
    Thanks & Regards,
    Abhimanu Kumar Singh

    HI,
    Thank you for the response, I just checked and could find that I can create Mitigating control without PC application. It is just that PC relevant fields are not displayed.
    However can anybody answer as to what happens if I use PC to create Mitigating Control, Do I have to purchase the license for SAP GRC PC or it is ok for shared resources.
    Thanks again.
    Thanks & Regards,
    Abhimanu Kumar Singh

  • R/3 - MDM field Mapping

    Hi All,
    I am looking for latest R/3 and MDM field mapping for Customer, Vendor, material and Product. I already have IDoc to MDM mapping included in SAP business content. But i am looking for R/3 and MDM field mapping. it would be of great help for me if anyone can send me this on my id [email protected]
    Thanks,
    SHiv.
    Points will be rewarded for helpful answers.

    Hi shiv,
    When u unzip the business content for Customer,material,vendor then in the repository u have remote systems which have a list of standard remote systems namely R/'3,Data warehousing..etc.
    Now in the Import Manager select type as <given data format> and the remote system as R/3 since u r importing the data from R/3.
    After doing this you can import the maps and then u will get a list of all maps in a sequencail order .selecting this map will help you to map the R/3 fields to MDM for customer/material/vendor.
    note the mapping has to be done in the given sequence in the list.
    Please award points if u find these blog helpful.
    Thanks and Regards
    Deepankar Pandit

  • Migarting from Approva to SAP GRC AC 5.3

    Hello All,
    One of our client using Approva applications now they are planning to move to SAP GRC Access Controls 5.3, so kindly help me or guide he how I proceed.
    Key doubts u2013
    1-How we upload rules in RAR, because we downloaded the rules from Approva.
    2-Creation of mitigation controls etc.
    It would be great if some share some documents related to above.
    Thanks,
    Jagat

    Hi Jagat,
    Once your GRC system is configured. You have to follow the following steps:
    1. Create system connector
    2. Define Master User Source
    3. Upload text & authorization objects. (Follow the AC53 Configuration guide to download these files from backend)
    4. Now as Frank has suggested you have to convert the downloaded Apporava files to .txt files. There are 9 .txt files you have to create:
    1. Business Process
    BusinessProcessId (CHAR 4)     LANGUAGE  (CHAR 2)     DESCRIPTION LANGUAGE  (CHAR 120)
    *fileds are TAB seperated
    2. Function
    FUNCTION ID (CHAR 8)     LANGUAGE  (CHAR 2)     DESCRIPTION LANGUAGE  (CHAR 120)     FUNCTION SCOPE (CHAR 1 (S:Single System, C: Cross System))
    3. Function-Business Process
    FUNCTION ID (CHAR 8)     BusinessProcessId (CHAR 4)
    4. Function-Action
    FUNCTION ID (CHAR 8)    TRANSACTION(CHAR 20)     STATUS (NUMC 1 (0 or 1))
    5. Function-Permission
    FUNCTION ID (CHAR 8)     T-CODE (CHAR 20)     OBJECT(CHAR 10)     FIELD(CHAR 10)     FROM VALUE(CHAR 40)     TO VALUE(CHAR 40)     SEARCH TYPE(CHAR3 (AND,OR,NOT))       STATUS (NUMC 1 (0 or 1))       
    6. Rule Set
    RuleSetId (CHAR 8)     LANGUAGE  (CHAR 2)     DESCRIPTION (CHAR 132)
    7. Risk ID
    RISKID (CHAR 4)     FUNCTION_1_ID  (CHAR 8)     FUNCTION_2_ID  (CHAR 8)     FUNCTION_3_ID  (CHAR 8)     FUNCTION_4_ID  (CHAR 8)     FUNCTION_5_ID  (CHAR 8)     BusinessProcessId (CHAR 4)       PRIORITYDESCRIPTION (NUMC 1 (0=Medium
    1=High 2=Low 3=Critical))      STATUS (NUMC 1 (0 or 1))        RISKTYPE (CHAR 1 (1=SoD 2=Critical Action 3=Critical Permission))
    8. Risk Description
    RISKID (CHAR 4)       LANGUAGE  (CHAR 2)     RISKDESCRIPTION (CHAR 132)     DETAILDESCRIPTION (CHAR 1000)     CONTROLOBJECTIVE (CHAR 1000)
    9. RISK_RULESET
    RISKID (CHAR 4)       RuleSetId (CHAR 8)
    For more information on templates follow the configuration guide.
    Upload these files and generate the rules.
    Hope with this you will be able to continue.
    Thanks & Regards,
    Jitan

  • Help with Role Attribute config in ERM in SAP GRC AC 5.3

    Hello, 
    I have a doubt.
    We are configuring the Role Attributes of the ERM in SAP GRC AC 5.3.
    Where can I get the Business Process & sub-process of a SAP ECC 5.0, in witch Tcode?
    An in the part of u201CProject/Releaseu201D where can I get this element from SAP ECC 5.0?
    Thank you in advance.
    Best regards.
    Pablo Mortera.

    Pablo,
       You won't be able to get BP, SBP and Project/Release information from any Tcode. Whenever security admin creates a role, they assign the role to a Business process, functional area etc. This information comes from Business.
    Project/Release field is used to identify the project name for which this role is being created/maintained.
    These are role attributes which help in role documenation so business needs to decide about the association.
    Regards,
    Alpesh

Maybe you are looking for