SAP GUI EDITOR issue

Hello Experts,
I am having some issue in the SAP GUI editor.
Whenver I open the SCREEN painter. It opens in line editor with error "EU_SCRP_WN32 : timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'"
My graphic layout editor option is checked.
The Component version is SAP EHP 1 for SAP Solution Manager 7.0
GUI version is 640
My other box whose component version ECC 6.0. There editor is opening in the Graphical format.
kindly help.
Regards,
Hema

Hello,
This is version compatibility issue. You can talk to BASIS administrator and get the lastest SAP GUI installed.
Thanks,
Augustin.

Similar Messages

SAP Gui 730 issue with crobu theme

Hello Frineds, Our developer team is facing some strange issue. They are able using corbu theme in SAP GUI 720. but after the new SAP GUI 730 implementaion, they are not able to use this theme. Checked all the notes etc, but its not clear on themes part. Any one faced this kind of issue or any suggestions. Thanks in advance. Regards Munish

Hi Munish,
Can you raise this in ABAP community ?
Also, to help you further can you drill down to some more relevant information ?
As far as one can understand, it's a rendering problem with SAP GUI 730.
This can also be compatibility issue with your kernel and application.
I would suggested you to check all above options.
Regards,
Divyanshu

SAP GUI Compatibility issue with Windows 2008R2 64 Bit

Hi Gurus
Is anyone experienced connectivity issue with SAP GUI (32bit) on Windows 2008R2 64bit? Except base version of 7.3 every Service Pack failing
to connect, Strange thing was it was working with SP5 in WINDOWS 7 64bit.
Your inputs greatly appreciated.
-giri

Hi Giri
Yes, You can do the normal installation on windows 2008 / 2008 R2 systems. we are using in our environment. is this any error message while installation or SAPGUI execution time?
Refer the SAP Note 66971 - Supported SAP GUI platforms
BR
SS

SAP GUI Memory issues on Windows Terminal Server 2003!!

Hi All
We are currently experiencing serious issues with our terminal servers and SAP GUI. It appears that SAP GUI is consuming a large amount of memory inorder to run, which in term is causing our terminal servers to page more.
I am not sure where to start with this issue so any help would be great!
Thanks
Phil
Loads of points if someone helps me solve this!!!

Citrix won´t help much, it´s "just" a different protocol between the client and the server, Citrix itself will use even more memory.
Why are you sure, that the reason for this is the SAPGUI and not any other Office program?
Let´s calculate:
I´m writing this message on a TS too. My Outlook (2003) consumes ~ 32 MB memory (incl. virtual), I have 4 SAPGUI windows open which consume 64 MB and some telnet sessions (no Word, Excel etc.)
Let say roughly 128 MB all in all.
If you have 2000 users with 20 servers, means, 100 users on one server, that would be 12,8 GB memory - not caclulated other services running on that box (printserver etc.) including the operating system itself.
If your users have Internet Explorer (or other browsers) open too, you will need to add that amount too. 128 MB per user is the minimum.
If users use BEx (or other .NET based BI developer tools), that amount will doubled (at least).
SAP recommends a PC with at least 256 MB memory to run a SAPGUI with acceptable performance, do you have that much per users? How big are your single servers?
Markus

SAP GUI Install Issues on computers using VISTA

Installed SAP GUI many times on Windows XP computers, but having issues on your new VISTA system?
There are two major issues for SAP GUI on VISTA, here is an overview of how to solve them:
1. The unzipping wizard native to VISTA is lousy. Download the WinZip demo (www.winzip.com) or one of many free archiving tools. Make sure to unzip the SAP GUI file WITH FOLDERS. Use Windows Explorer to drill down through the unzipped GUI as shown. Double click SapGuiSetup.exe to start your installation...
2. The saplogon.ini file MUST be placed in the SAP GUI installation folder, not into C:\Windows.
The folder is:
C:\Program Files\SAP\FrontEnd\SAPgui
or for 64bit:
C:\Program Files (x86)\SAP\FrontEnd\SAPgui
Restart SAP GUI to properly display your server list. Contact your Hosting Center if you continue to have issues. Our email is sap at csuchico.edu

Troy -
There is also this link recently which may be of help.
SAPgui 720 PL1 upgrade causing IE 7/8 issues
Running this resolved that users issue.
C:\Program Files\sap\sapsetup\setup\"sapregsv.exe mshtml.tlb"
In your case it may be under the x86 folder since you are 64bit.
C:\Program Files (x86)\sap\sapsetup\setup\"sapregsv.exe mshtml.tlb"
Regards,
Zecher

SAP GUI LOGON ISSUE

Greeting Gurus,
Whilst trying some BASIS general transactions with user logon settings, which I dont remember, now it does not allow me to log on using my SAP user id
I get a message Log on with a dialog user
Could you please explain why I have this problem and whats the solution.
Thanks

Hi Rasig,
the follow link from the sap online help describe the user types and the effects:
[http://help.sap.com/saphelp_nw2004s/helpdata/en/52/67119e439b11d1896f0000e8322d00/frameset.htm]
To change the user type, please see my reply above for the transaction SU01.
Kindly regards,
Stefan

SAP GUI installation issue.

Hi All,
I am trying to install SAP GUI640v16 on my machine (Windows XP).
In the middle of the installation, I'am getting an
error like:
Your computer needs to be restarted due to pending system changes. It is not safe to continue without a reboot.
How do i resolve it?
Thanks in advance.

I have only seen this at the beginning of the installation. You can check the following Registry Key to determine if a restart is required:
<b>HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\UpdateExeVolatile</b>
Value in RegEdit Meaning
0x00000000 (0) No pending restart.
0x00000001 (1) A software update removal is pending a restart.
0x00000002 (2) A software update installation is pending a restart.
'// 0x00000003 (3) Both an installation and a removal are pending a restart.
As Rich mentioned, cancelling the install, Restarting and re-running the installation should fix the problem.
Cheers,
John

SAP GUI 7.20 patch version 4 error: runtime error

Hi Experts,
My developement getting error while running\opeing crystal reports
the error is
Microsoft Visual C++ Runtime Error
Runtime Error !
program M:\spvgui8...
R6030 - CRT not intialized
let me know if any patch is required to opening the crystal report
Edited by: vasu k on May 16, 2011 1:53 PM

Hai,
Please move the thread to SAP GUI forum under Application server.
You will get some expert advise under SAP GUI forum dedicated for SAP GUI related issues.
Thanks.
Regards,
Yoganand.V

Issue in SAP GUI 7.0 for ECC6 (ABAP Editor not working)

Dear SAP Team,
We have installed SAP ECC6.0 EHP4.We have installed SAP GUI 7.0 in our clients machine but in some machines the ABAP Editor i.e Tcode SE38 is not working properly.When our Client selects any transaction for editing the system gets HANG.
We have tried uninstalling & reinstalling the software & the patch but the problem still persists.The configuration of all our client machine are same & we work on Windows XP platform.Please help us in solving our issue as soon as possible.
Thanks & Regards,
Manoj Mhatre.

Dear Manoj
you mean the SAP Gui for windows 7.20 or 7.10?
Please install the latest Sapgui Patch 3 for the Sapgui 720, or the Sapgui
Patch 19 for the Sapgui 7.10.
As workaround, please use the OLD frontend editor.
Best regards,
Sven

SAP GUI with SNC logon and Hummingbird Exceed - SAP GUI window size issue

We have discovered an issue when SAP GUI 7.10 is used to logon via SNC and Hummingbird Exceed is used on the same workstation to logon to a UNIX system either via x-windows or telnet.
When the user logs onto a UNIX system using Hummingbird Exceed, then uses SAP GUI to logon to a SAP system with SNC authentication, the SAP GUI authentication works, but the favourites list is not fully displayed and has to be resized before any of the entries are available.
Has anybody else seen this issue, and do they know if there is a fix available ? We wondered if there might be an issue with fonts or some other sort of conflict between Exceed and SAP GUI, but it is strange that the problem only occurs if SNC authentication is being used, and when userid+password is used to logon to SAP the problem does not occur.
Cheers,
Tim

Hello Tim and Wolfgang,
I was curious too as I found it interesting... so I tested a few combinations, but could not reproduce what Tim has described, at least not before my CPU reached 100% and the applications stopped responding (~2GHz processor, 1GB RAM, 48 kbps connection, latency ~ 2 x width of the Pacific Ocean, but Backend 7.00!).
However I did notice some indications which might be a help (based on 7.00!):
Back in 4.?? there was a problem in that large menus could not be searched(!). Sorry, I don't have access to SAP now, but from memory the note # was 444043 (or very similar) and introduced a form routine for large menus - from a printscreen I still have the message number which led me to the note - 'I476(S#)'.
The system certainly distinguishes between MENU_TYPEs and the above note corrections could be found in several locations relating to the SAP menu 'S', the role menu 'A' etc, but I could only see that for favourites 'F' this is implemented for the menu search (when searching, not when loading).
@ Tim: Ask you customer to create a favourites menu which only has 1 node or max 2 (certainly not more than 4!) and ~ 20 executable objects in it (not more than 30!)? Can they under any conditions achieve the described problem with such a menu?
If not possible to reproduce, then the closest I could guess is a maximum limit of 4 nodes and max 30 objects for a 'F'avourite menu, before it is a minimum candidate for "performance problems" and consideration to be converted to a role ('A'ctivity group) menu instead.
Sorry that I can only help by speculating, because I could not reproduce what you have described.
Hopefully this problem will not happen to me in the New Year, and hope you will solve it for the rest of the year
Cheers,
Julius
Updated memory (not RAM) by: Julius Bussche on Jan 3, 2008 9:07 AM

Username and password issue in SAP GUI logon-Please help

Hello,
Usually I download the tx.sap file from my work system it downloads and opens the main screen directly.( password is disabled for us). Now when I connect from home(home system through VPN) ,i can download tx.sap file from my company's SAP web portal ,but when I open the same through SAP GUI on my system it pops up a password screen- the issue is my employee ID is already populated in the username tab, but when I provide my domain password (i tried all my passwords),it throws an error -you do not require a password, now when i try without a password it shows fill in all required entry fields. Please assist.

If you enter just the username, the network is not sure which "AD Domain" to contact tp authenticate you as a user. So you need to specify the domain name in any of the below 2 formats. Give it a try.
Format 1 - [email protected]
Format 2 - DOMAIN\UserName
Hope this helps.

SAP GUI issue with Portal on Windows Vista

Hello. I am using Windows Vista on my laptop. We use the portal to access our SAP systems. I have SAP GUI 7.1 installed on my machine. When I click my WIN GUI link from inside the portal I get a download file request. I download the file, however I have to click on the WIN GUI link a second time for the GUI to actually open I am using IE 7.0 as well.
Please advise if you know how to resolve this issue.
Thanks,
Stuart

try installing patch 5 for SAPGUI from ftp://ftp.sap.com/pub/sapgui/win/710/patches/

SAP GUI 7.20 RDS Document Direct Issue

We use Document Direct in viewing and modify bills from our various Call Centers. We discovered after deploying SAP GUI 7.20 Patch 2 that in breaks Document Direct. The work around is to uninstall and reinstall. We would prefer not to do this as the Agents can't be off their desktops for that length of time. I would even prefer to export the registry key and reimport it as an option. Anyone else have a solution?

Hello Raymond,
This is documented in the note
1647827 BW 3.5 Addon patchlevel 7 incorrectly contains SAP GUI files
During the creation of the BW 3.5 patch an error occurred that caused
the additional files to be packaged into the patch. The issue has been
analyzed and counter measures have been taken.
Solution
    o If you have not applied patchlevel 7 of BW 3.5 Addon for SAP GUI
       for Windows 7.20, yet: Do not apply it and wait for a subsequent
       patch of BW 3.5 Addon.
    o If you have already applied the patch you have to install
       patchlevel 9 (or a higher patch, if available) of SAP GUI for
       Windows 7.20. This will remove the inconsistency and repair the
       issues mentioned above. The delivery schedule for patchlevel 9 is
       explained in SAP Note 1053737.

Issue with SAP GUI 7.30 launching with users upgrading from 7.10

We started rolling out SAP 7.30 GUI Final 7300.3.7.117 out to people, and we've ran into this error with people who had upgraded from SAP GUI 7.10.
Our environmental variable uses saplogon.ini (SAPLOGON_INI_FILE) and points to c:\windows\saplogon.ini
I don't know why the program is trying to search for saplogontree.xml.
I've tried uninstalling, rebooting, reinstalling. Deleting some of the %appdata% SAP folders.
I need some guidance as people who upgraded from GUI 7.20 do not run into this issue.

This popup would make sense Jason,as the path C:\Windows\SapLogonTree.xml would not be a valid path to this file.
Really, 7.10 should not have been used at all as an upgrade path as this had finished support in 2009
If you have a small number of users with 7.10, it's recommend to remove it via add/remove programs in the OS, then install a clean 7.30 gui.
The environment variable should not point to C:\Windows\ at all since this is a restricted folder in
Windows Vista and higher, and will only cause further trouble later on in the updates
See note http://service.sap.com/sap/support/notes/1409494
Jude

Commenting a Line in ABAP Editor when using SAP GUI for java

Hi,
In ABAP editor we can highlight the line which are to be comment and use cmd+< sign to comment those lines. What will be the command to be used to achieve the same functionality when using SAP GUI for JAVA on an iMac.

Hello Kedar,
please check with SAP GUI for Java 7.20 rev 5 before submitting a bug report.
Also please verify, that cmd-< and cmd-> are not assigned as "Keyboard Shortcuts" in the "Keyboard" control panel of "System Preferences".
Bug reports can be submitted with the [SAP Message Wizard|http://service.sap.com/message], for SAP GUI for Java please use component BC-FES-JAV.
Best regards
Rolf-Martin

SAP GUI EDITOR issue

Similar Messages

Maybe you are looking for