SAP HR load qualifications for job and positions

Hi Everyone.
I have one specific requirement, i have to create program to load qualification for a set of jobs and positions. can some one guide me if there is a function module or a BAPI or a BDC transaction to do it. For example rep RHPEPRFM. any help is greatly appreciated

Hi,
you can use RH_INSERT_INFTY.
Regards,
Amit
Reward all helpful replies.

Similar Messages

Uploads of Jobs and Positions

Hi
So we had a little bit of an issue. We uploaded the jobs and the postiions and went live. However after about a month now the Compensation team wants to redo the jobs and the positions. The system is already live and PA and OM are interconnected.
I want to ask
1) Can we upload this once again - I mean the new jobs and positions
2) What is the impact on the existing Org units jobs postions and persons. these are all we are using at present.
3) What is the impact on the PA side.

Thank you for your reply
We only have PA and OM live at present the payroll is going to be an external system with an interface to SAP.
Yes I agree that the impact will be high but going by the meeting I have been in the past week we will have to rework the existing jobs and positions.
So going by your suggestions should I delete all the objects created for jobs and positions and the relationships first and then upoad the new jobs and positions into the system.
To give you an example
We have manager as jobs - and postion probably as HR manager.
What the business wants to do is have HR manager as the job and the local title used in other countries as the positions.
e.g HRIS manager as the position. I know this is not the ideal way but that is the w=only way we can accomodate all the countries requirements.
Now in IT 0001 there is the relationship between PA and OM. THe SAP position numbers may change for the employee. Could you recommend how do I link up the employees again, or would I need to reload the PA's also.

Actions for Org.Units, Jobs and Positions

Dear All,
I know how to create or copy the available actions for Org Units , Jobs and positions thro' the table T777M and run them through PP03.
Once I do it , when I want to skip some of the relationships it doesnt allow me to , the next page tab is grayed out.
I mean if we have for ex. a position reporting to a position and because he is, say CEO and I want to skip that relationship I am unable to , how to activate the skip or Next page tab ??
Regards
Uday

Hi,
Goto table T77IV click on maintain, Click on New Entries >> Enter the subgroup ( PVOB) PV - Plan Verson and OB is for Object you want to maintain the number ranges for eg : 01C for Job. >> Enter and save the record...
It will take u to the next screen >> Click on maintain intervals >> Click on Add Intervals >> New screen will appear ... enter the details as below :
NO From Number To Number Remarks
01 1 19999999 This is Object range
Note : do not enter anything in "Current Number" & Do not select "Ext"
I hope this will help you....
regards,
Navinkumar

Transaction code to create job and position in LSMW

Hi,
I am looking for transaction codes that can be used in LSMW to Create Job and Position. I have used PPSC, but instead of creating Job and Position, It creates org unit although I pass in the parameter for ObjectType.
I would appreciate if anyone can help me with this problem.
Thank you in advance,
Sunny

Hi,
Check this link
http://help.sap.com/saphelp_46c/helpdata/en/0c/e785d8f8af11d2a61f0060087832f8/frameset.htm
Thanks & Regards,
Judith.

Creating a new job and position prompts customizing request...

Dear All,
        I created a Job and Position through PP01 transaction. I am facing 2 issues while doing so...
1. System prompts for Customizing request when i try to save the new entry.
    What table/settings do i need to maintain for turning of the customizing request promptings.
2. Once i save the entries(after entering some dummy customizing requests), when i check the
    HRP1000 table for the new jobs and positions... The table entry shows 2 records for each Job and
    position. One entry with Plan version '.:' and another with active Plan version '1'.
    I need to have just one entry in HRP1000 table for each job/position with ACTIVE plan version.
   I checked T77S0 table, it has active plan version maintained against the PLOGI-PLOGI entry.
   Please let me know what table i need to maintain to handle my requirement.
Regards
Nanda

Hi Nanda,
When you create new job or position in sandbox system it will not ask for the request number,since you generally dont transport the objects from sandbox to test system.
When you create a new job or position in development system, it will always ask for request number. This is because, in most of the cases, you need to transport the job and position to test system and then to production system.
Without a customizing request you wont be able to transport those changes to next system.
Thanks,
Supriya.

Job and Position Descriptions in ESS

Hi all,
Does anyone know of a way of an employee accessing their Job and Position Descriptions from OM via ESS/MSS?
I can see that ESS is very usefull for dealing with the PA side of an employee, but find it hard to allow access to their own OM data.
Any tips or pointers on the subject would be greatly appreciated.
Kind Regards
John Anderson

Dear jmjakobsen,
We are implementing HR for a public Sector client, here we would like to use Positions as we are also implementing Purchasing. I am looking after the implementation of HRMS.Could you be able to help me on deciding on the Position KFF Structure.
We are using multiple segment position KFF.
My doubt is that if we use a multiple segment Position KFF, then what should be the Job KFF structure. Also, Our employees will be tagged at Departmental level and we are not capturing the multiple work-groups within the department.
How can we achieve the uniqueness of a position?
Will there be substantial work involved in creating unique Positions?
Thanks for the help, in advance
Sachin S.

Can you change the units used for size and position in layout editor?

Hello,
In Aperture 3.4, does anyone know if you can change the units used for size and position in layout editor? The page is set in inches, but the image size and position are given in centimetres and I would prefer to work all in inches to create custom layouts. I can't see any way to change this. If anyone knows how it would be much appreciated. Thanks!

Aperture uses the unit settings defined in the System Preferences. Set the "Measurement Units" in the "Region" tab of the "Language & Text" preferences to "US"; the Aperture will display the Size & Position in inches, if it is the "Book" layout manager you are asking about.
Merry Christmas!
Léonie

I need to use Outlook Express to apply for jobs and I either don't have it but when I try to send an e-mail on Outlook Express, it won't go through and gives me an error report.....I really need to be able to use Outlook Express to apply for jobs. Help!

When I try to apply for job and when I try to e-mail my resume' and Outlook Express comes up to reply to on, I put in my information, etc but when I hit send, it doesn't go through and says? POP and then error report and doesn't go through.

I can't provide a solution with or without the error message, but without an error message, you are making everyone guess at what you see. I have no idea what you see, and I think someone who might be able to help you solve your problem would need to know what that message says. Is "Outlook Express" (Windows Live Mail) your default email processor, if not what is?

Any idea while updating job and position --I am getting the following error

Hi, I am trying to update job and position to the existing employee but getting the following error
Error report:
ORA-20001: The primary key specified is invalid
Cause: The primary key values specified are invalid and do not exist in the schema.
Action: Check the primary key values before attempting to carry out the operation again.
ORA-06512: at "APPS.HR_ASSIGNMENT_API", line 16616
ORA-06512: at line 35
Code which I am using is as below
declare
l_assignment_id number;
l_object_version_number number;
l_special_ceiling_step_id number;
LC_EFFECTIVE_END_DATE DATE;
LC_EFFECTIVE_START_DATE DATE;
LC_DATETRACK_UPDATE_MODE VARCHAR2(100);
LC_GROUP_NAME VARCHAR2(1000);
LC_CONCATENATED_SEGMENTS VARCHAR2(1000);
L_ENTRIES_CHANGED_WARNING VARCHAR2(1000);
LC_GSP_POST_PROCESS_WARNING VARCHAR2(1000):=NULL;
LC_PEOPLE_GROUP_ID NUMBER:=NULL;
LC_OBJECT_VERSION_NUMBER NUMBER:=NULL;
LC_SOFT_CODING_KEYFLEX_ID NUMBER:=NULL;
LC_SPECIAL_CEILING_STEP_ID NUMBER:=NULL;
LC_GRADE_ID NUMBER:=NULL;
LC_OTHER_MANAGER_WARNING BOOLEAN:=NULL;
LC_SPP_DELETE_WARNING BOOLEAN:=NULL;
LC_ORG_NOW_NO_MANAGER_WARNING BOOLEAN:=NULL;
LCTAX_DISTRICT_CHANGED_WARNING BOOLEAN:=NULL;
L_EMP_START_DATE DATE:=NULL;
J_LOCATION_ID NUMBER;
J_PAY_BASIS_ID NUMBER;
J_SEGMENT5 number;
J_SEGMENT3 number;
J_SEGMENT2 number;
J_GRADE_ID number;
J_PAYROLL_ID number;
begin
l_assignment_id := 214;
hr_assignment_api.update_emp_asg_criteria
P_VALIDATE => FALSE
,P_EFFECTIVE_DATE => TRUNC(sysdate)
,P_DATETRACK_UPDATE_MODE => LC_DATETRACK_UPDATE_MODE
,P_ASSIGNMENT_ID => l_assignment_id
,P_GRADE_ID => J_GRADE_ID
,P_POSITION_ID => 5062
,P_JOB_ID => 3063
,P_PAYROLL_ID => J_PAYROLL_ID
,P_LOCATION_ID => 142--J_LOCATION_ID
,P_ORGANIZATION_ID => 81
,P_PAY_BASIS_ID => J_PAY_BASIS_ID
,p_segment5 => J_SEGMENT5
,p_segment2 => J_SEGMENT2
,p_segment3 => J_SEGMENT3
,P_OBJECT_VERSION_NUMBER => LC_OBJECT_VERSION_NUMBER
,P_SPECIAL_CEILING_STEP_ID => LC_SPECIAL_CEILING_STEP_ID
,P_PEOPLE_GROUP_ID => LC_PEOPLE_GROUP_ID
,P_SOFT_CODING_KEYFLEX_ID => LC_SOFT_CODING_KEYFLEX_ID
,P_GROUP_NAME => LC_GROUP_NAME
,P_EFFECTIVE_START_DATE => LC_EFFECTIVE_START_DATE
,P_EFFECTIVE_END_DATE => LC_EFFECTIVE_END_DATE
,P_ORG_NOW_NO_MANAGER_WARNING => LC_ORG_NOW_NO_MANAGER_WARNING
,P_OTHER_MANAGER_WARNING => LC_OTHER_MANAGER_WARNING
,P_SPP_DELETE_WARNING => LC_SPP_DELETE_WARNING
,P_ENTRIES_CHANGED_WARNING => L_ENTRIES_CHANGED_WARNING
,P_TAX_DISTRICT_CHANGED_WARNING => LCTAX_DISTRICT_CHANGED_WARNING
,P_CONCATENATED_SEGMENTS => LC_CONCATENATED_SEGMENTS
,P_GSP_POST_PROCESS_WARNING => LC_GSP_POST_PROCESS_WARNING);
end;
Thanks in advance
Rajini

Please post the details of the application release, database version and OS.
What HRMS patchset you are on?
Please see if these docs help.
Getting "ORA-20001: The primary key specified is invalid" Error Using HR_ASSIGNMENT_API.UPDATE_EMP_ASG_CRITERIA API [ID 737145.1]
Hr_assignment_api.Update_emp_asg_criteria Gives Ora-20001, Ora-06512 [ID 334491.1]
Thanks,
Hussein

How to find out what are the interfaces used for Job and Job Codes

HI All,
I just wanted to know how do we find out what are the interfaces used for Job and Job codes .
Thanks In Advance
Sunny

Hi,
Here is an idea for your request.
Basically you can create a simple query on multiprovider 0TCT_MC01.
Filter: you can use a variable for restriction of time ( calday, or calmonth) since you should be interested for a time period.
Choose following characters into your objects:
InfoProvider ( 0TCTIFPROV ) - you can create a variable for choosing infoprovider before query runs.
*Tp.[Type of BI Application Object] 0TCTBISOTYP = filter this with 'QUERY' or whatever your need is.
*BI Application Object 0TCTBISBOBJ, ( this will give you the name of the queries)
In key figures choose, Count for BI Appl. (0TCTWTCOUNT).
(number for query run)
Create a condition , for top 20.
Hope this helps.
Derya

SAP GUI 7.20 for Windows and problem with Screen Painter

Hello,
I just installed the SAP GUI 7.20 for Windows and it looks good.
But when when I start the Screen Painter for a dynpro I get the following message:
Graphical Layout Editor not available. Continue with alphanumeric editor.
And: EU_SCRP_WN32 Connection broken '..' / CPIC
The SCreen Painter is installed correctly (I can start ist manually from file system) and the RFC destination works.
Any idea?
Regards,
Ole.

Hello,
I've uninstalled all SAP installations, cleaned the registry of Windows XP and deleted all folders with SAP content. Then I've installed the SAP Gui 7.20 again and it works.
And now I will update the Screen Painter with the information from the OSS-Note!
Thank's for your help!
Regards,
Ole.

SAP S/4 HANA for Oil and Gas

Hi All,
When SAP is announcing its road map for SAP S/4 HANA for Oil and Gas strategy. Which functionalities they are keeping from R/3, which they are dropping and which they are adding. How they are planning to simplify this area!!
Cheers

Dear Phillip,
Cloud enabled software can be easily deployed on-premises but not vice versa.
this could probably be the deciding factory, for every customer : - )
no one would want to block their future...
so even for on-premise, its better to start with cloud and go for hybrid model and i believe
if this lock is there.....
then every on-premise solutions will have a cloud solution.....
want to see your argument on, any one thinking, i want only on-premise, and i will not be needing
cloud solutions in near future..... also for hybrid customers, cloud first and then on-premise would be pain area.

SAP Standard Field Attributes for ME21n and ME

Hi,
Can anyone suggest me where i can see all the display,Hidden,Mandatory, optional SAP Standard field attributes for ME21N and ME51N.
I looking for Configuration settings
Thanks
Venki

Hi ,
All i see is Field Label Reqd.entry Opt. entry Display for ME21N and ME51N
I want to see what SAP Standard Fields are Hidden for these T-codes.
I want to use and Non Used Field ( Hidden SAP Field) for new Enhancement instead of creating a custom Tab
Thanks
Venki

Number range for Org.Units, Jobs and position

Hi,
Can someone guide me on how to create number range for Org. Units from say 10000000 (My org unit series should start with 1xxxxxxx), Jobs 20000000 and Positions from 30000000. Step by step would be helpful.
Also any link to any document would be appreciated
Regards
Uday

Hi,
Goto table T77IV click on maintain, Click on New Entries >> Enter the subgroup ( PVOB) PV - Plan Verson and OB is for Object you want to maintain the number ranges for eg : 01C for Job. >> Enter and save the record...
It will take u to the next screen >> Click on maintain intervals >> Click on Add Intervals >> New screen will appear ... enter the details as below :
NO From Number To Number Remarks
01 1 19999999 This is Object range
Note : do not enter anything in "Current Number" & Do not select "Ext"
I hope this will help you....
regards,
Navinkumar

Jobs and positions

Hi All,
What fields are needed for completing Jobs and postions in SAP
Thanks in Advance

hi,
can u explain further on this to know the exact requirement?

SAP HR load qualifications for job and positions

Similar Messages

Maybe you are looking for