SAP_HTTPServicePort URLs in SLD for PI are updated by SLD host name itself

We have upgraded our PI 7.0 to 7,1. We have a central SLD. After the upgrade, SAP_HTTPServicePort URLs (in SLD Content maintenance) for the PI are all getting initialized with SLD host name itself.
Example: for port.CIDX.af.pip.<PIPhostname>
URL: http://solman:50100/MessagingSystem/receive/CIDXAdapter/CIDX
solman is my central SLD.
This is happening in our production system only. In Dev/QAS systems, the behavior is normal like
http://PIDHostname:50000/MessagingSystem/receive/CIDXAdapter/CIDX
I have tried to update the URLs manually, but, when the instance is bounced, the SLD is getting refreshed with the erroneous URLs.
I want to know where from the SLD content is refreshed?

There are two ways....
Option 1 : Go to the BS of ur R3 system in Integration Direction. Go to edit mode mode and select Properties -> Adapter Specific attributes - > enter the LS name and save...
Option2 : You can use it from the mapping.... U either hard code/use from source the EDIDC40 section of ur mapping and the in ur IDOC receiver config select the option user
Option ! is the best soln...All the IDOC to that R3 system will go the specified LS...
regards,
Arvind R

Similar Messages

What are all the itunes host names (IPs) about?

I monitor downloads with a tool called matrixstats. I am currently in the process of filtering to remove hits from spam bots, robots and web crawlers from the statistical reports. The itunes IP 17.* is the most aboundant host name recorded. Is the itunes store acting as proxy for podcast subscribers and listeners or are the hits from robots and web crawlers checking for updates to the podcast.
List of filtered IPs:
17.184.84.0
17.184.84.35
17.154.84.36
17.154.84.37
17.154.84.38
17.154.84.39
17.154.84.40
17.154.84.41
17.154.84.42
Does this refer tag refer to a user requesting a podcast download through the itunes store?
iTunes/11.0.2 (Windows; Microsoft Windows 7 x64 Ultimate Edition Service Pack 1 (Build 7601)) AppleWebKit/536.27.1
Is the reference to iTMS one to a robot? If it is do you have its ip address so I can refine my filter.

All this is outside my experience, and I've asked to have your question moved to the iTunes for Windows forum where you are more likely to come across a suitable guru.
However one thing I can tell you is that when someone goes to the iTunes Store page for a podcast and subcribes from there, all it does is set his own copy of iTunes to access the feed - the Store is no longer involved, so subsequent hits on the feed come from the subscriber's computer, not from the iTunes Store; and so the IPs would be those of the domain hosting the feed.
'itms' is the protocol (like http) used in the link from the web page version of an iTunes Store podcast page - where it says 'view in iTunes' - the protocol is associated on Macs with iTunes and so opens the program and calls the Store page for the podcast in question. In Windows you may have to deliberately associate this protocol with iTunes (which of course is not on the computer by default as with Macs).
For any more info I hope someone in the other forum can help you.

How to change host name for SLD

Hi All,
How is possible to change host name of SLD configuration?
I want to change my portal host name used for SLD configuration from aaa.bbb.net to aaa.ccc.net.
How can i do it?
Thanks a lot!
Alex

Hi,
you can change it in System Landscape directory.
Go to the http:yourportal.com:50000/sld
then click on the Landscape and update the new host name.
Raghu

How to change host name for management agent.

Hi,
I 've installed management agent for oracle, it's a part of Oracle Management Framework, but I have to change host name.
I know how to change port number, but I've no idea how to change host name.
Have you got any idea?
Thank you in advance.
Matin

Hi,
you can change it in System Landscape directory.
Go to the http:yourportal.com:50000/sld
then click on the Landscape and update the new host name.
Raghu

Java Web is taking twice the host name while creating URLs

Hi Colleagues,
I am facing a strange issue, refer the below URL,
http://inst50067133.inst50067133.blr3.sap.corp:50000/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=0RSTT_I07_T010_DP4
It takes twice the hostname while creating any URLs. SAPLOCAHOSTFULL is set correctly with the full host name, still it generates like this.
Any one come across like this & any solution is found? Please post me.
Thanks
Isaac

Hi Issac,
Can you explain it in detail, which area you have checked/editted in portal side for resolving this issue.
We are facing the same here, while executing any queries iin Busi. explorer, portal comes with the URL including twice the hostname .
Please advice .
Regards,
Nibu Antony

How can I create a host name site collection when I have a 443 web application already created for App model?

Hi all,
I have a 2013 farm set up with the App model
1 web application for path based site collection using host name
1 web application with SSL (no host name)
1 web application for mysite
My business request is that I need to migrate SSL enabled 2007 content to this farm and use host name site collections. I tried to create one more web application for this without any luck (the 443 IIS folder is already used by another web application).
I thought I bind the previous 443 web application with another IP address should be fine. Seems like the IIS site is taken (https://server name:443) so it will not let me create one more. How can I solve this problem so I can create the web application
to host those host name site collections? Any suggestion is greatly appreciated.
Thanks in advance.
Sally

Hi Trevor,
Thanks again for your quick reply. I try the option 2 right after your post. I use my front end server name for public URL (https://WFEName:443) and it fails again. The error message is:
The directory C:\inetpub\wwwroot\wss\VirtualDirectories\443 is already being used by another IIS Web Site. Choose a different root directory for your new Web application.
After reading more, I saw mix Hosted Name Site collection and Path-based site collection aren't recommended. Unfortunately I already have Path-based site collection created with App model web application
(the web application without host name) in my farm. In my Option 2, that web application without host name is used for App routing. This takes the root folder 443 which will not allow any other web application to use the same name again.
Does that mean we can't create Host Named Site collection in the same farm? Is there any configuration I need to check?
Thanks again.
Sally

Fully Qualified Host Name for XI Repository etc?

Hi everybody!
How do I get XI 3.0 to generate a URL for the IB:Repository and Directory, for example, with a fully qualified host name, instead of just http://sap2:50000/...? I already implemented Note 773830, but it hasn't helped. Any ideas?
Thanks a lot!
Francis Wolf

That is the beauty of XI...
Put an entry in your laptop or desktop pc
with the hostname and FQD...
IP hostname FQD name
Then it should show up...
John

Virtual Host Name for CM

Hi ,
R12.1.3 & 11gR2 DB
I have a qucik question . When We have Virtual Host Name for setting , What Should be the node name for ICM in Concurrent Manager Admin form.
In One of our Instance : For ICM & Other Manager , its Virtual Host Name
For Other : ICM : Physical Host Name & Other Manager Virtual Host Name .
Which is good. We having a issue with ICM on both Nodes , in every minutes is going down and come up automatically.
Regards
Sourabh Gupta

Hi Hussein,
Thanks a lot. I have already review these document.
Is Auto Failover With Virtual Hostnames For Concurrent Processing Servers Supported In 11i Or R12? (Doc ID 456540.1)
Adding an Alias Hostname with Oracle E-Business Suite Release 12 (Doc ID 603883.1)
Concurrent Processing - CONC-SM TNS FAIL In Internal Concurrent Manager (ICM) Log File With Virtual Hosts Configuration [ID 961216.1]
ICM Not Starting: Node Name not Registered [ID 602942.1]
I am curious what should be the node name in concurrent manager Administrator form.
W ether is should be the virtual host name or physical host name.
I have just checked with few people , Some Says ICM node name should be Physical server name & Other CM name can be Virtual name. I am not sure on what basis people are saying.
Few says node name should be the physical host for every CM.
Note Sure what is correct & best configuration.
Regards
Sourabh GUpta

I would like to connect a printer that requires OS 10.6 or newer. My MacBook is currently using OS 10.5.8. In searching for a software update, I am told no updates are needed. How can I upgrade my OS to 10.6 or better?

I would like to connect a printer that requires OS 10.6 or newer. My MacBook is currently using OS 10.5.8. In searching for a software update, I am told no updates are needed (and am given no option for updating my OS). How can I upgrade my OS to 10.6 or newer?

You have to understand the difference between an Update and an Upgrade.
An Update is a free change to add to the base code or as a bug fix within an existing Operating System. Such as the .8 added to OSX 10.5 or the .11 added to OSX 10.4..
An Upgrade is a complete new Operating System that must be purchased. Such as 10.5 Leopard to 10.6 Snow Leopard.
10.5 Leopard was written for Power PC Macs with code added to force it to run on Intel processors.
10.6 Snow Leopard has completely rewritten code and only runs on Intel Macs.
10.7 Lion ($19.99) used some 32 bit which allows it to run on Late 2006 through Early 2008 MacBooks and a lot of 64 bit code.
10.8 Mountain Lion ($19.99) is pure 64 bit, which excludes more systems than Lion did. It can only run on the Late 2008 through Mid 2010 MacBooks. It's not something you can add memory to, for example, as it involves the base architecture.
10.9 Mavericks is pure 64 bit and is a free download from the App store.
The 10.6 Snow Leopard DVD is in the Apple online store. You can get it for $19.99. http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard After you’ve installed that then download the 10.6.8 combo updater to finish it off. http://support.apple.com/kb/DL1399 You will need to be running 10.6.8 to access the App Store to order Lion, Mountain Lion or Mavericks which are downloads only.
System Requirements for 10.6:
Mac computer with an Intel processor
1GB of memory
5GB of available disk space
DVD drive for installation
Some features require a compatible internet service provider: fees may apply.

What are the special conversions for time in update rules?

What are the special conversions for time in update rules?

Hello,
Special conversions for time in update rules are automatically conversion rules.
Example: If the cube contains calendar month and your transfer structure contains date, the date to month is converted automatically.
Assign points if this helps,
Regards,
Jorge Diogo

When I try to open the Iphoto it keeps on asking for the software update but when I click on the software update tab, it says that all updates are up to date. I still cant open the Iphoto, what should I do?

When I try to open the iphoto it keeps on asking for the software update, but when I click on the software update it says that all the software in the computer are up to date. I still cant open the iphoto, what should I do?

How old is your Mac? If it's very recent you need to update via the App Store
If you purchased at the App Store you need to update via the App Store
Otherwise you update via Softare Update
If you have moved iPhoto from the default location (i.e. into a Folder) then the updater won't find it. Move it back.
If you have renamed iPhoto, the updater won't find it. Change it back.
Regards
TD

All my plugins keep crashing after I try to use them. The two main ones I really want working are silverlight and adobe flash player but for some reason Firefox 9.0.1 keeps crashing them. All plugins are updated

All plugins are updated. This has only started happening recently. Plugins seems to launch for a few seconds (no more than 5) and then crash. Chances are that there is more than a problem with just Silverlight and Flash but they are the only two that I really use.

Perform the suggestions mentioned in the following articles:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]]
* [https://support.mozilla.com/en-US/kb/Template:clearCookiesCache/ Clear Cookies & Cache]
Check and tell if its working.

I'm having trouble with my Pages app. Over half of my document are updating, and do not finish. I cannot get to the documents. This has been going for 2 weeks now, they do not update.

I'm having trouble with my Pages app. Over half of my document show that they are updating. I cannot open or delete the documents. Does anyone know a fix for this? Please help.

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430http://support.apple.com/kb/ht1430
Troubleshooting apps purchased from the App Store
http://support.apple.com/kb/TS1702http://support.apple.com/kb/TS1702
 Cheers, Tom

Mr.CEO said that once we are updated to ios7 iPhoto ,iMovie are for free. But when I got to App Store it is paid one

Mr . CEO said that once if we are updated to ios7 then iMovie ,iPhoto are free but when I am in AppStore then those apps are paid once

What Apple said was that you will be offered the iWork's apps for free if you activate a new device after September 1, 2013.

Update version CO 000 for controlling area

Hi Experts,
I need to update the values for CO versión 000 for a new controlling area created in the system. In order to do that I tried to customize in Project System--> Costs --> Create CO Versions. In the tables I choose version 0 but, when accessing sub-menu Controlling Area Settings, I cannot create settings for my new controlling area.
Can someone help on how can we solve this?
Thanks a lot!
Kind regards,
Neil

Hi Neil,
What do you mean by inability to create settings for conrolling area? What is exactly the problem/error message. Just set the conrolling area (OKKS) and access the path you mentioned.
Regards,
Eli

SAP_HTTPServicePort URLs in SLD for PI are updated by SLD host name itself

Similar Messages

Maybe you are looking for