SAP IS Retail: Transferring Generic article from one SAP system to another

Hi,
I want to transfer generic article from one SAP IS Retail system to another SAP IS Retail system using ARTMAS idoc using BD10 in sending system. But I could not get article in receiving system in BD11. ARTMAS is not available in BD11.
How can I process this ARTMAS idoc in receiving system?
Thanks and Regards
Richard

How about using RFC with BAPI to pass the info out?
It's easier this way.

Similar Messages

  • Data transfer from one BW system to another

    As there are, at least theoretically, a myriad of ways to push data from one BW system to another, I was wondering if anyone had some key thoughts or experiences to share. I see that OpenHub/InfoSpoke and the Data Mart Interface / Export DataSources seem to be the main methods of choice.
    What are the differences, and what are the key points to consider between these two or other recommended ways (for BW3.5)?
    Thanks in advance,
    Thomas

    Hi,
    In the all the data transfer between SAP systems RFC is the best option.
    Just create a source system for the new BW system and it will work.
    Thanks
    Message was edited by:
            Ajeet Singh

  • How to load from one BW System to another BW System

    Hi Guys,
    I want to load the BW data from  PAX(BW-Production System) to PRX (BW-DCC-System) .Is there any steps to load it from One BW System to another BW System.
    Any doc available to do the loading from One BW System to another BW System.
    Pl mail to [email protected]
    Send me the steps .
    Points will be assigned.
    Thanks,
    Chinna

    Hi Chinna,
    Loading from one BW system 2 another primarily involves loading data from one infocube to another in other BW system.
    U can create export data sources from infocubes ( rt. clk on infocube n then select  ) and then use these datasources to load data into the infocubes of othar system in usual way.
    Try this out.
    Hope it helps,
    Manish

  • Migrating Data from one BW system to another

    Hi Friends,
    I have a task where i need to replicate/migrate objects under specific InfoArea/s from one BW system to another BW system. Please suggest me the ways this can be done. Thanks in advance for all the help.
    Raj

    Hi
    to transfer the data is easy, use flat files or you can export the DS in the source sys and then load it in the target sys (the easiest way).
    to transfer structores look at these:
    Re: Transporting Queries
    I hope it helps.
    Edan

  • Transferring an Employee from one Company Code to Another Company Code

    Dear All,
                       we are implementing the HR Implementation for the group of Hospitals, each hospital being an Individual Legal entity, but there is a requirement, where in there is a possibility that the employee may be transferred from one Hospital to other on a short term basis or on a long term basis, and as long as the Employee stays in that transferred place, his salary is to be paid from that particular Hospital,
    As per my understanding, we have to run the seperation action and then go for a hiring action in the new company,,, but this wouldnt solve the purpose if the employee works for 10 days in a month in one Hospital and the rest in the Other Hospital...
    I have come across various posts on sdn regarding the same issue that it is possible, but i didn't find the end result for this one,I would request you to provide me with your inputs on this one.
    Regards,
    Bharadwaj

    Hi ,, I am aware that we need to execute a transfer action, but how can we transfer an employee from one company code to another???  let me explain you with my scenario here....
    HOSPITAL-1 : XYZ1 ( Company Code)
    HOSPITAL-2 : XYZ2( Company Code)
    Hospital 1 (XYZ1) and 2(XYZ2) belong to the XYZ Group of Companies
    both these hospitals are separate legal entities
    an Employee "A" is working in a Hospital 1 ( XYZ1) from 1st of a month till 10th and from 11th onwards he is working in Hospital2(XYZ2).
    if i want to transfer an employee internally from one Personnel Area to another Personnel area or from one org unit to other org unit then i can do it through transfer actions, but how am i supposed to do a transfer action in between two company codes?

  • Applescript: transferring total appearance from one page item to another

    What is the best way to transfer all the properties of a path item that determine appearance to another path item?
    What if those path items are in separate documents?
    Should I copy and paste?
    what about:
    set item_properties to every property of page item 1 of document 2
    set properties of page item 5 of current document to item_properties
    Specifically, I want to copy the following properties from one path item to another, across documents:
    stroked
    stroke width
    stroke color
    stroke dashes
    stroke cap
    filled
    fill color
    --and any patterns that are used as fill
    blend mode
    opacity
    any help appreciated.
    thanks.
    Ben

    Thanks Mark.
    the main downside to this is it adds another layer of manual work--you would have to make a graphic style by hand from each sample object (because you can't make a new graphic style with a script). I would rather make the script do the work, so that if I have a lot of different sample items to mimic it could be automated.
    The big problem I've encountered with just moving each property over is that when I make my own fill pattern for the sample object, and copy that pattern over as a "fill color", it seems to cause some problem with opening the document, as I found in this other discussion:
    http://forums.adobe.com/thread/542632?tstart=0
    Thanks again,
    Ben

  • Tool to transfer data from one CRM system to another

    Hi,
    We are merging one CRM system into another and need to transfer master data and transactions from one CRM system into the another. What are the options/tools that are available for data migration in CRM 7.0?
    Please share experiences/thoughts if you have moved data into SAP CRM from legacy/other SAP CRM systems.
    Regards
    Dan

    Hi Dan,
    Looking at your post - I decipher that you would be doing download from a lower version of SAP CRM system to SAP CRM 7 if this is the scenario then you have an advantage as you could employ standard SAP CRM middleware which is a powerful application to download master data from older version to new version, or else you could ALE the master data. Now this being the simple part we move on to the harder part of the migration which is transactional data - namely elements such as Number ranges, document flow, relationships, condition data tables .....etc if you are migrating this from lower SAP CRM version here you would have to understand the interlinking with R/3 or ECC6 in any case you would have to do a fresh implementations but on the whole there are some way outs for examples ; But still  let me know how you intend to migrate and what are systems we are talking about.
    With compliments,
    Tarovar.

  • Copy Transferrules from one source system to another

    Hi everybody,
    we're uploading data from nearly 25 sourcesystems (including separate systems and systems with more than one client to extract from) via flat-file. The source-system exports data to a shared file directory and the bw-system reads it from there. Though this results in only <b>one</b> transferrule for all source-systems, it keeps generating problems every time upload is due.
    Somebody had the idea to switch to 'standard' R/3->BW method of data staging, using generic extractors and so on. But this will result in <b>25</b> transferrules which, I'm afraid, have to be set up and maintained seperately. As there's quite some coding in the rules (the transfertructure in fact has 241 fields), flaws are for sure!
    We know the trick of exporting a transferrule, changing the source-system-mapping and re-importing the same transport-request. That can be used to copy to one or two other systems, but not for 25.
    Does anybody know another way to copy a transferrule from one source system to multiple other source systems?
    Looking forward to your answers
    Thanks and Regards
    Robert

    Hi Ralph,
    I don't like that methode. Importing the same transport 15 times, each time changing the source-system mapping and making sure, that source-system gets the changes seems to be a huge source of errors, which will be hard to find.
    What do you think of the following idea to solve the issue a totally different way:
    All transfer-rules directly connected to the source-systems are stripped of all Coding, so there is a plain 1 by 1 transformation including 0logsys.
    The InfoSources attached all lead to one ODS-Object, which has the only purpose to collect the data from the source-system without any transformation. So some fields a filled by a system and other fields maybe not.
    The coding specific for source-systems is moved to transfer- / update-rules from that ODS-Object to the original ODS-Objects / Cubes and the "collecting" ODS-Object is emptied after every loading process.
    This will result in a single point of change. It will be quite a huge program (maybe in startroutine) but it's the one and only point, where changes and corrections have to be made.
    Regards
    Robert

  • Transferring iTunes Metadata from one internal drive to another

    I recently added a new hard drive to my G4 and loaded it with Leopard. My old drive (with Tiger) is still resident in the system. When I used the Migration Assistant to transfer over my data, my iTunes Library transferred just fine, but none of the metadata (playlists, ratings, play counts, bpm) came with it. Everyone keeps telling me just to copy over the whole iTunes folder from one drive to the other, but there are at last count three different iTunes folders on both systems. Could someone please be more specific? Is there not one or two files somewhere that holds this metadata that can be copied from one drive to the other? I had over 50 playlists and had spent HOURS adding bpm info to my library... I'd hate to lose all of that time and effort.
    Thanks!

    Firstly are you intending to keep your Windows installation on the current drive? Is your iTunes data on the same drive?
    If so you don't want to reinstall the iTunes program.
    There are basically two ways of moving iTunes to another drive, method one just moves the iTunes Music folder:
    http://docs.info.apple.com/article.html?artnum=305451
    Method 2 involves moving your iTunes folder so that everything, music and library files is on the other drive:
    Close iTunes.
    Copy the iTunes folder from My Muisc to your chosen location on the other drive.
    Hold down the shift key and start iTunes, when asked to choose a libary, navigate to the iTunes folder in the new location and choose iTunes Library.itl. This assumes all your music is in the iTunes Music folder, there is another step if it isn't.
    Without knowing exactly how you have things set up at the moment and how you want things to be after the move it's hard to choose between the two.
    If you intend to reinstall Windows, of course it is completely different.
    OOps I posted a link to a Mac method, link changed
    Message was edited by: polydorus

  • Transferring of employee from One Company Code to Another company code

    Hi Friends,
    There is already configured SAP HR solution for say 1000 Company code, Now I am implementing for another company code 2000, Client has requirement to transfer employees from 1000 ( company code ) to 2000 ( company code ).
    Country is UAE (Gratuity / Pension legal calculation)
    According to me as company code is an legal entity, We need to resign the emplyee in one company code and hire him in another company code. What you say? OR any best SAP Preactice ?
    Thanks
    Jay

    Hello Jay,
    You need to have different PAs for different company codes and assign those PAs to the respective company codes (check IMG: Enterprise Structure -> Assignment -> Human Resources Management -> Assignment of Personnel Area to Company Code).
    Now you need to run action (transfer or org reassignment) wherein you will change the existing PA (belonging to one company code) to another PA (belonging to different company code). This way the employee master in IT 0001 will show different company code from the date of such action
    Goto PA40, choose Transfer actionChange Info group
    0001 COP
    0006 COP
    0009 COP
    0007 INSS
    0008 COP
    0014 COP
    0015 COP
    0588 COP
    OR
    Perform the action Organizational reassignment in PA40 for that employee and change the personnel area. by changing the personnel area the company code will cahnge automatically
    regards,

  • Transferring library,files from one itunes account to another

    I have two itunes accounts running under the same user. How do I transfer the library and other files from one account to the other?

    I have two itunes accounts running under the same user.
    ??? iTunes accounts don't "run".
    Do you mean you have two iTunes accounts that you purchased songs with?
    You can't transfer them. The account info you purchased them with is embedded into the song file.
    If you are talking about songs in iTunes, just add them to your iTunes.

  • Allowing SSO via Hyperlink from one BO system to another

    Hi all,
    I am looking into a possible scenario where I want to allow users to open a WEBi report which us owned by one BO environment within another BO system.
    In the same way that I can allow a user to open and work with a WEBi report from NW portal via via an Iview and with SSO, I wish to achieve the same thing by allowing a user to click on a hyperlink in a European BO system which opens a report in the APAC BO system.
    Is this possible, and what would be needed in terms of SSO set up?
    We are currently using SAP BW authentication in our BO systems and most data is via BEx/BICS
    Any suggestions gratefully received.

    If you have an opendoc hyperlink that conatins the username you could setup trustedauth using query string.

  • Push data from one BW system to another BW system

    Hi:
    I am aware of the process using export datasources to pull data from one BW (source) system into another BW (receiving) system. But is there a way/process where by the source BW system can push the data to the receiving BW system?  Thx

    Hi:
    If you don't get any better replies, think about Triggering Events from SOurce BW and these events will start the Pull from Target BW.
    E.g., Create P-Chains or ABAP Programs in Source BW. Here, whenever data needs to be pushed, an Event will be triggered in Target BW.
    In target BW, that raised Event will kickoff Process Chains, ec.
    Let me know if you want to ivestigate this option.
    Ram C.

  • Transferring purchased apps from one apple ID to another.

    Hi, i have been sharing an apple ID with my parents for quite some time now. I am now moving out and have had to make my own apple ID to use with my own iPhone and iPad, is there anyway that i can transfer the apps that i purchased on my parents apple ID to my new apple ID? any help would be greatly apprieciated.

    Yes, but you'll need to update them from the original Apple ID, and may need to change the one signed into the iTunes Store to make in-app purchases.
    (92669)

  • Transferring money(balance) from one account/computer to another

    I have purchased itunes cards and applied the money to my account, on different computers. Thus, I have a balance in one computer as well as another.
    Is there a means to lump all of this money/balance into one computer, so that I need not use the other computer to purchase?

    You get one d/l from the iTS - from there you will have to do the transfer via the offered options.
    As long as the other computer is authorized then it will play the content.
    MJ

Maybe you are looking for