SAP LSO - Profile matchup -Qualification hyperlink error

Dear Experts,
In my profile matchups and Qualification, when I click the highlighted Qualifications , I get an error like
"Error COMMUNICATION_FAILURE. Possible cause: error during communication with the back-end system. Try to display the requested page again. If the problem persists, inform your system administrator. "
Previously , It was working fine,
Can anybody please suggest what might be the possibility of this error?
Regards
Rizwan S

Hi Per,
perhaps transaction S_AHR_61015532 (Report RHXPEP01) is the solution for you.
Regards
Bernd

Similar Messages

Link between Qualification Profile QP & Qualification Q

Dear Experts,
Can anyone , tell me what is the relationship between Qualification Profile QP & Qualification Q?
In Profile Matchup & Qualification profile application ,I am getting an error like
" communication failure between backend".
I doubt the link between QP & Q or QP & QK is missing.
Regards
Rizwan S

Hi,
there is a relation between QP and Q => A031
as far as I know there is no relation between QP and Q
Please male sure that this relation is maintained between QP and Q.
BR
Martin Hastik

Profile matchup report?

Does anyone know if there is a SAP standard Profile matchup report showing multiple persons qualification gaps at once, without comparing each person with all the specified positions? I only want the report to match the person(s) against his/hers own position, not all of them at once.
Thanks!
//Per

Hi Suresh,
Thanks, but I've already tried this function module, the problem is however that it compares all persons with all positions in the result. I only want the result to display the match or gap between each person and his/hers OWN qualification profile and position.
Do you know if there is any way to get this function module to deliver that kind of result?
Br
Per

Custom error messages when booking traing in SAP LSO

In SAP LSO i implemented the BADI IF_EX_LSO_CHECK_BOOKING~CHECK_BOOKING in the code i throw error message in the object ct_message_tab of type DCMESSAGE.
When the error is presented within the portal two things are not the way i want it.
1. The error message can be up to 50 characters per message so i need to append more line to ct_message_tab, each line is presented with the read error symbol prior to the line. i want multiple lines with only one error symbol
2. I:001:000 Voor deze training hebben we aanvullende persoonsgegevens van je nodig.
I:002:000 Geef hiervoor je akkoord op de disclaimer bij "Informatie" in dit leerportaal.
I:003:000 Heb je vragen hierover? De cursusaanbieder beantwoordt ze graag.
the message are presented with the message number and message id, I only want to display the the msgv1 to msgv3.
Hope anyone got a clue.
Finaly the next problem, when pre-booking a course only a SAP pre defined error is shown, so the custom ct_message_tab is not visible on this screen.
I use following code three times because of maximum length of 50 characters per message line
      IF sy-subrc EQ 0 AND lv_disclaimer IS INITIAL.
        lw_message_tab-msgid = '001'.
        lw_message_tab-msgty = 'E'.
     lw_message_tab-msgno = '1'.
        lw_message_tab-msgv1 = 'Voor deze training hebben we aanvullende'.
        lw_message_tab-msgv2 = 'persoonsgegevens van je nodig.'.
        lw_message_tab-msgv3 = ''.
        lw_message_tab-msgv4 = ''.
        APPEND lw_message_tab TO ct_message_tab.
        lw_message_tab-msgid = '002'.
        lw_message_tab-msgty = 'E'.
     lw_message_tab-msgno = '1'.
        lw_message_tab-msgv1 = 'Geef hiervoor je akkoord op de disclaimer'.
        lw_message_tab-msgv2 = 'bij "Informatie" in dit leerportaal.'.
        lw_message_tab-msgv3 = ''.
        lw_message_tab-msgv4 = ''.
        APPEND lw_message_tab TO ct_message_tab.
Edited by: Richard van Veen on Apr 21, 2010 9:13 AM

Hi,
it is urgent can any one help on this.
Thanks,
Sridhar Reddy.G

Help! SAP-LSO - LSO-AE "A Read-Write Error Occurred when checking in the Object"

Using version 14 of LSO-AE
WBT publishes fine
Error occurs during check-in to Master Repository
It seems to be a 3rd party WBT created by the NTSB, so I only have the SCORM 1.2 package, no source files unfortunately.
Thanks in advance for any advice that is offered!

Figured it out. Not that this forum helped! But here is the answer should anyone else have a similar problem on check-in. The standard setting for the LSO Repository is 100MB. Trying to check in anything larger than this, caused the above error. Increasing the configuration setting fixed the issue and allowed successful course check in without the above error.

Problem in importing SAP Exchange profile (BASIS settings) - Urgent

Hi,
I am currently facing problem in importing SAP Exchange profiles manually.
When i enter into http://<J2EE_host>:<J2EE_port>/exchangeProfile with username as PISUPER, the page is getting loaded but
<b>1.</b>it shows a error message stating, Name or password is incorrect
<b>2</b>. When i ignore that error and proceed with the connections tab to edit the server settings, i cannot set the password for PILDUSER. It again says, Name or Password is incorrect..
What could be the reason for these errors. Please help me... This is very urgent....
Thanks in advance,
Rose

Thanks for your response guys. I checked for PISUPER and PILDSUPER in SU01 and checked for lock but it shows an error message saying User doesnot exist.
Kindly let me know how to procced on in this case.
Thanks and Regards,
Rose.

Is there a way set the object type defaults in the Profile Matchup (PEPM)?

Our users would like to have the Profile Matchup (PEPM) default the object type to P (Qualifications profile of Person) and S (Requirements profile of Position). Currently launching PEPM defaults to U (user) and S (position). Is there a way to change the default value from U to P using a PID? or some other method?
Thanks in advance,
- Lora

Hi Lora,
I can't think of a way without changing the program behind it.
Regards,
Priya.

Profile Matchup With Own Position

Hello All,
I am working on upgrade from EP 5.0 to EP 7.0
In this i am working on profile match up .In EP 5.0 standard ITS service MY_PROFILEMATC is used ,this calls report RHPD_MY_PROFILEMATCHUP and Profile Matchup screen opens .It basically shows the same screen as it comes from transaction pepm.
Now i want the same to be exposed through web in EP 7.0 without using ITS .Is there any way or any BSP application with which we can achieve this.
Thanks ,
Pratyush

Well for that you have to make some configuration under homepage framework...
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b0e3a488-cdc2-2b10-209b-e01a0ed934b4?quicklink=index&overridelayout=true
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e05d564f-6e1c-2d10-42b2-9e21a211950d?quicklink=index&overridelayout=true
You will find a service with name EMPLOYEE_CAREER_SKILLSENHPROFILE_13
Associate it with Skills Sub-area EMPLOYEE_CAREER_SUBSKILLS_2005 / EMPLOYEE_CAREER_SUBSKILLS
Edited by: Saurabh Agarwal on Jul 13, 2011 4:55 PM

PROFILE MATCHUP

Dear Friends,
I am not clear on where and how to do profile match up? Please help me find a solution to this problem. Also, I want to know what is the use of Jobs and Tasks and how are they related?
Regards,
AXE

Hi axe,
For profile matchup you can use the transaction PEPM, wherin you can match the person qualifications with the requirements against position, jobs and task.
Each of these contains required qualifications which are needed to be matched against one personnel aggignment's qualification.
Try looking out in PEPM, with a existing pernr.
Rgds,
Swapnil

Profile Matchup - Compare Jobs

Hi Experts,
My customer has the following requirement: They want to implement something like Profile Matchup but between 2 Jobs. I know we can compare for example a Person (P) with a Position (S) or Job (C), but not Job (C) with Job (C). Is there any stabdard way that this can be applied?
Thanks in advance

Hi
In order to find out Qualification Deficits and/or generating training proposals we perform profile match up b/w object types P, US etc... to S, C etc...
What is the business requirement to compare JOBS? can you please expalin?
Best Regards
Reddy

MSS - Profile Matchup Fake TeamViewer Problem

Hi,
I have to make some changes to the Profile Matchup component. To deploy and run It requires a team views which is part of the Profile Matchup development component. The component has a Application called TestProfileMatchupApp. When I run and deploy I get this exception
com.sap.pcuigp.xssfpm.java.FPMRuntimeException: No instance id defined for VAC com.sap.xss.hr.tmv.vac.VTeamViewerComp.
     at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:111)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.getPropertyValue(FPMComponent.java:1003)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPMProxy.getPropertyValue(FPMComponent.java:1141)
     at com.sap.xss.hr.tmv.vac.VTeamViewerComp.onBeforeOutput(VTeamViewerComp.java:234)
     at com.sap.xss.hr.tmv.vac.wdp.InternalVTeamViewerComp.onBeforeOutput(InternalVTeamViewerComp.java:208)
     at com.sap.xss.hr.tmv.vac.VTeamViewerCompInterface.onBeforeOutput(VTeamViewerCompInterface.java:144)
     at com.sap.xss.hr.tmv.vac.wdp.InternalVTeamViewerCompInterface.onBeforeOutput(InternalVTeamViewerCompInterface.java:136)
     at com.sap.xss.hr.tmv.vac.wdp.InternalVTeamViewerCompInterface$External.onBeforeOutput(InternalVTeamViewerCompInterface.java:212)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.callOnBeforeOutput(FPMComponent.java:602)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:568)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.doEventLoop(FPMComponent.java:437)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.wdDoInit(FPMComponent.java:195)
     at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdDoInit(InternalFPMComponent.java:110)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
     at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:429)
and so on
Any ideas?
Thanks Preston Sampson

Hi,
Faced this problem before and found out that its a authorization issue more than anything else..
Did u try
Note 844639 - MSS Authorizations and roles for WD services in ERP 2005
Before this note ...
Use the report contained in Note 785345 to copy the authorization-check
indicator and authorization default values for the services from the SAP
tables (USOBX, USOBT) to the customer tables (USOBX_C, USOBT_C), so that
you can use these in Transaction SU24.
Let me know if it works after this. MSS has all these peculiar auth problems.
Cheers!!
Ashutosh

Need Expert Advise on Profile Matchup in HCM

Dear all, we may be familiar with profile matchup using Employees (P) versus potential Position (S).
I have 2 requirements;
1. to do a matchup at the department level (or based on a group of employees instead of single). Is this possible via standard or customising is required ?
2. Calculating deficiency and output as figures. for example, if i have a score of 2 for language English proficiency and the ideal scale is 5, i want the system to say that my score is 2/5 = 0.4 (40%) in a nice formatted display.
Are both achievable? For your kind advice.

Peter whatever you mentioned in your query can be achieved a few pointers on how this sis possible:
1. your qualifications catalogue and the design of the same determines how you achieve your results.
2. make sure your config for 'scales' against qualification are correct.
3. make sure the assignment of the qualifications to different agents --> position/person/jobs et al is done according to the business process requirements.
4. profile match-up std reports in ecc may not give you a beautiful user-friendly interface to report on however once you got your data and config correctly, I dont see why you cannot go ahead and build a couple of good reports for business critical processes.
cheers

Training Proposal Update- Profile Matchup

Hi Experts,
Whenever we run a Profile Matchup we can also generate the training proposal for an employee.and we can directly book him for a business event .
A training Proposal Icon should be generated to book an employee for a business event.
When i tried to run a profile match i could get the qualification deficit of an employee but the training icon for training proposal was not generated.
Can anybody tell me wat could be the reason for this.Is there any swtich or any thing that i have to activate or maintain.
Please reply
Regards,
Smitha

Hi Dilek,
We are not implementing TEM. but the training proposal symbol should be generated when i run a profile matchup
Regards,
Smitha

SAP PI 7.1 - Runtime Workbench Error - "Service Unavailable"

Hi there,
We have just installed SAP PI 7.1 on an iSeries 6.1 server, all seems to be successfully installed except that the runtime workbench will not start. It seems to be that the runtime workbench service was not deployed successfully during the install.
The error when trying to launch the Runtime Workbench is:
Application cannot be started!
Details: com.sap.engine.services.deploy.exceptions.ServerDeploymentException: [ERROR CODE DPL.DS.5004] Cannot create application loader for application sap.com/com.sap.xi.rwb.
     at com.sap.engine.services.deploy.server.utils.LoadContextUtils.defineSharedApplicationLoader(LoadContextUtils.java:100)
     at com.sap.engine.services.deploy.server.DeployServiceImpl.bindLoader(DeployServiceImpl.java:1780)
     at com.sap.engine.services.deploy.server.application.StartTransaction.prepareCommon(StartTransaction.java:216)
     at com.sap.engine.services.deploy.server.application.StartTransaction.prepare(StartTransaction.java:179)
     at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:419)
     at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesImpl(ParallelAdapter.java:495)
     at com.sap.engine.services.deploy.server.application.StartTransaction.makeAllPhasesImpl(StartTransaction.java:554)
     at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:248)
     at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesAndWait(ParallelAdapter.java:389)
     at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3387)
     at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3373)
     at com.sap.engine.services.deploy.server.DeployCommunicatorImpl.startApplicationAndWait(DeployCommunicatorImpl.java:749)
     at com.sap.engine.services.servlets_jsp.server.deploy.impl.ApplicationManager.start(ApplicationManager.java:180)
     at com.sap.engine.services.servlets_jsp.server.deploy.impl.ApplicationManager.analyseAppStatusMode(ApplicationManager.java:288)
     at com.sap.engine.services.servlets_jsp.server.DeployContext.startLazyApplication(DeployContext.java:334)
     at com.sap.engine.services.servlets_jsp.filters.ApplicationSelector.process(ApplicationSelector.java:86)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
     at com.sap.engine.services.httpserver.filters.WebContainerInvoker.process(WebContainerInvoker.java:67)
     at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
     at com.sap.engine.services.httpserver.filters.ResponseLogWriter.process(ResponseLogWriter.java:60)
     at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
     at com.sap.engine.services.httpserver.filters.DefineHostFilter.process(DefineHostFilter.java:27)
     at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
     at com.sap.engine.services.httpserver.filters.MonitoringFilter.process(MonitoringFilter.java:29)
     at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
     at com.sap.engine.services.httpserver.server.Processor.chainedRequest(Processor.java:309)
     at com.sap.engine.services.httpserver.server.Processor$FCAProcessorThread.run(Processor.java:222)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:152)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:247)
Caused by: java.lang.IllegalStateException: [ERROR CODE DPL.DS.6102] The sap.com/com.sap.xi.rwb class loader is not null, but sap.com/com.sap.xi.rwbcom.sap.engine.boot.loader.ResourceMultiParentClassLoader722bac67alive for the LoadContext, which is wrong /nHint: The reason could be leaking class loaders.You can also check, whether above in the stack trace, there is a call to unregister the loader.
     at com.sap.engine.services.deploy.server.utils.LoadContextUtils.ensureLoaderNameAndUnregisteredLoader(LoadContextUtils.java:52)
     at com.sap.engine.services.deploy.server.utils.LoadContextUtils.defineSharedApplicationLoader(LoadContextUtils.java:72)
     ... 34 more
Has anybody had this error before? Or how easy is it to manually re-deploy the service again?
Thanks for the help
Lynton

I have just seen this on the forum as well which is exactly the same question that I have....
RWB application cannot be started after PI 7.1 installation
I will try it now and will let you know
Lynton
Edited by: Lynton Grice on Aug 18, 2009 12:29 PM

SAP NetWeaver 2004s ABAP Trial Version - error code = 200

Hi all,
installation of SAP NetWeaver 2004s ABAP Trial Version
which was attached to the book ABAP-Objects ends again and again with
ProductException: (error code = 200; message="Java error"; exception = java.lang.Exception)
Attached you find information about
   1) Host-file
   2) Network connections
   4) Error - Log
It seems that the      [#    [#]
echo                7/tcp
echo                7/udp
discard
           9/tcp    sink null
discard             9/udp    sink null
systat             11/tcp    users
     #Active users
systat             11/tcp    users                  #Active users
daytime            13/tcp
daytime
           13/udp
qotd               17/tcp    quote                  #Quote of the day
qotd               17/udp    quote
              #Quote of the day
chargen            19/tcp    ttytst source          #Character generator
chargen
4) == E R R OR L O G ================================================
(Jan 1, 2007 1:07:15 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err,
an error occurred and product installation failed. Look at the log file D:SAPNSPlog.txt for details.
(Jan 1, 2007 1:07:15 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err,
ProductException: (error code = 200; message="Java error"; exception = java.lang.Exception)
STACK_TRACE: 15
ProductException: (error code = 200; message="Java error"; exception = java.lang.Exception)
     at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.execute(StepWrapperInstallFiles.java:254)
     at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllSteps(StepWrapperInstallFiles.java:224)
     at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllInstallationSteps(StepWrapperInstallFiles.java:177)
     at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.install(StepWrapperInstallFiles.java:268)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
     at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
(Jan 1, 2007 1:12:17 PM), Install, com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct, err,
An error occurred and product uninstallation failed. Look at the log file D:SAPNSPlog.txt for details.
(Jan 1, 2007 1:12:17 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err,
ProductException: (error code = 200; message="Java error"; exception = java.lang.Exception)
STACK_TRACE: 15
ProductException: (error code = 200; message="Java error"; exception = java.lang.Exception)
     at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.execute(StepWrapperInstallFiles.java:254)
     at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllSteps(StepWrapperInstallFiles.java:224)
     at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllUninstallationSteps(StepWrapperInstallFiles.java:192)
     at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.uninstall(StepWrapperInstallFiles.java:313)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.uninstallProductAction(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.processActionsFailed(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
     at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source
== Remark to threads ========================
Thread a)
"I found it is very useful to have a clean system" => not applicable to me
Thread b)
deals with removing relics of previous installations => hints considered but error still appears
Thread c)
not applicable to me

Hi all
I've read your entrys.
Saw that the solution is missing.
It can be found in the manuals:
1. Download the "Registry Clean Tool for SAP NetWeaver 2004s ABAP" and use it.
2. Download the latest Version of "SAP NetWeaver 2004s ABAP" and un-rar it.
3. Install the "Microsoft Loopback Adapter" an activate it.
4. Retry to install.
Summary:
So the error 200 was caused for the first time from trying an installation without a Loopback Adapter, and after that from trying to re-install without cleaning the registry.
Now its working fine.
Thomas

SAP LSO - Profile matchup -Qualification hyperlink error

Similar Messages

Maybe you are looking for