SAP Netweaver ABAP 7.01 Trail Version

I've installed the SAP Netweaver ABAP 7.01 Trail Version successfully on my system Window Server 2003. But i m facing problem when i m statring Application Server ,the message is displaying Service name is Invalid.Can anybody help me.

Hi
Have you logged on with SIDadm ? check the logs for exact problem
Regards
Uday

Similar Messages

Where to get license key for SAP Netweaver ABAP 7.01 trail version?

Hi All,
I installed SAP Netweaver ABAP 7.01 trail version on my PC but I don't know where to get the license key and how to install it. Please guide me.

Hi
Refer the following link for installation of license key.
https://cw.sdn.sap.com/cw/docs/DOC-111105
/people/mario.herger/blog/2010/01/20/new-community-developer-license-is-available
Regards
Vinodh

SAP NetWeaver ABAP 7.02 Trial Version - CPRXRPM

Hello Experts,
I have installed the "SAP NetWeaver ABAP 7.02 Trial Version" from SDN downloads and as you know it comes with SAP_ABA, SAP_Basis, PI_Basis, SAP_BW components.
I still need CPRXRPM component. is it possible to add the CPRXRPM component to the above mentioned trail version?
Please advice, also have any one done this before?
Thanks in advance for your time,
regards,
K

Hello Florian thanks for your quickest response. I would like to emphasize that I have installed the "SAP NetWeaver ABAP 7.02 Trial Version" from SDN downloads it comes with SAP_ABA, SAP_Basis, PI_Basis, SAP_BW components.
I still need CPRXRPM component. is it possible to add the CPRXRPM component to the above mentioned trail version? Please confirm.
Also have any one done this before?
regards,
K

Uanble to Download SAP NetWeaver ABAP 7.02 Trial Version

I tried to download SAP NetWeaver ABAP 7.02 Trial Version but Iam getting a message
"Unfortunately there was a technical issue completing your download request. Please try again later."
I tried to download the same again after 8 hours but Iam receiving the same messge not only for ABAP 7.02 Trial Version but for all the SAP Main Releases.
Please help me resolve the issue!!!

Hello Florian thanks for your quickest response. I would like to emphasize that I have installed the "SAP NetWeaver ABAP 7.02 Trial Version" from SDN downloads it comes with SAP_ABA, SAP_Basis, PI_Basis, SAP_BW components.
I still need CPRXRPM component. is it possible to add the CPRXRPM component to the above mentioned trail version? Please confirm.
Also have any one done this before?
regards,
K

Unable to renew the SAP NetWeaver ABAP 7.02 Trial Version license

Greetings,
My license for SAP NetWeaver ABAP 7.02 Trial Version has expired and I was trying to renew the license the other day. I was able to install the new license but, unfortunately, I were not able to delete the old licence not activate the new one.
I logged on with user: SAP* to install the new license and it was installed successfully. When I do try to delete the old one the system gives this error message: " Only the administrator is allowed to delete licenses. When the valid system license has expired, only the user SAP* can log on to the system. in this case, it would be dangerous to delete a license.
This is why the user SAP* is never allowed to delete a license."
Anybody can assist me with the license renewal please ?!
TIA

My problem is solved ,, thanx whoever looked at it :).
the solution was that I downloaded and NSP license key but for an other version of the product.
Thanx.

How can i add FICO module to the SAP Netweaver ABAP 7.02 trial version

Dear Brothers
I am a new learner of SAP and interested in learning FICO. As part of that I installed SAP Netweaver ABAP trial version and after the installation I had problem in Logging in but it was solved lately. Now I face an other challenge which I may share with u guys. After logging in I wanna start with a new company code creation for FICO but I cant find the Enterprise Structure for in SAP Reference IMG. Only I see the following structure
SAP Customizing Implementation Guide
     Activate Business functions
     SAP Net weaver
     Cross-Application Components
     Financial Supply Chain Management
     Integration with Other my Sap.com components
I expanded the tree structure but could not find the Enterprise Structure> Definition> Financial Accounting--> Define Company
So is this because of missing FICO module if so how can I install that module for I can learn myself @ home. Kindly help me to fix this prob and hope to hear from the SAP experts around the world.
W8ng for a reply have a gr8 day a head
Thnx
Cherian

My problem is solved ,, thanx whoever looked at it :).
the solution was that I downloaded and NSP license key but for an other version of the product.
Thanx.

Steps to setting up BI in SAP Netweaver abap 7.0 trial version

Hi all,
I meet some difficulties to setting up BI in SAP Netweaver 7.0 trial version
I do those steps:
- loggin to client 000 with user DDIC pwd minisap
- Change client active to 001 with transaction SE16
- Enter table name RSADMINA
- Enter BW in the CUSTOMZID field and click Execute (press F8)
- Select the table row BW and click change (press F6)
- Enter 1 for the BWMANDT and click save
- Run SU01
- create new user NWUSER
- initial pwd for the NWUSER sap2009
- create grant (SAP_ALL, SAP_NEW)
- save
- log off on the system
- login to client 001 with new created user NWUSER
- I can't loggin --> name or password is incorrect (repeat logon)
Wich step i missed?
Please help me, i need to pratice some tuto on BI platform
Thanks and bests regards
Souad

Hi all,
I arrived to active BI platform in sapnetweaver trial version 7.01, i follow this steps.
1/You need to login to 001 client as SAP* password minisap
2/Create your own user in SU01 transaction and log in with your own user.
3/Then run Administration workbench of BW (RSA1) and create and assign of logical system to your client,
4/replicate DataSources form its own BW system.
It's easy and simple.
Trial version had a limit, when i tried to create a transformation between a datasource an InfoObject i meet some trouble. Log message suggest to install frontend of sap netweaver to resolve this trouble.
This topic is close
Thanks Uday
Kinds Regards.
Souad

How to Register as a Developer on SAP NetWeaver ABAP 7.02 Trial Version

Hi Everyone,
I was following a tutorial on ABAP and this centred on "Hello World" application. I got a message that I haven't been registered as a Developer on the system and that I need some code from OSS. I have tried checking here for any clues but it seemed none existed. Can't SAP be a bit more simplified like MS? It really requires lots of effort to get the right help and even at that, helps are not easily come by. I really which someone would point me in the right direction this time.
Thank you.

plz can u answer me to solve my problem... i download SAP Netweaver 7.02 and install it ...... when log on to SAP i can not make any think ..... SAP tell me You are not registered as a developer ... please register in the online service system (OSS). in the OSS you will receive an access key.
i log on by
DDIC and BCUSER
and i have the same problem
PLZ tell me how can registered my self as a developer on sap to get access key ..?

Connecting SAP Netweaver ABAP Trial Version from 2 Laptops

Hi All,
I have a scenario where in I have installed SAP NetWeaver ABAP Trial 7.1 version on one Laptop. All the Presentation and application server are also installed on the same laptop and everything is working fine. Here NetWeaver is installed on Windows Vista.
Now, I would like to connect to SAP NetWeaver from another Laptop. In the other laptop i have Windows XP installed. I will install the SAP Front end and will supply all the application server details.
Is this approach proper or do i need to do something more to it?
It would be great if someone can provide some more information on this. I checked the Forum for this but as of now i couldn't find much resources or discussion on this.
Thanks and Regards,
Samantak.

Hi Martin,
yes. It's true the SAP is still a client Server Application, but is SAP NW AS ABAP Trial version also supports - multiple systems?
If yes how does it do this? What are all the configuration settings required?
I have checked the SAP GUI for the main laptop where my NW AS is installed and found that the application server is configured as localhost. If there is no proper address of the application server then how to connect it with the system from another laptop?
Hope you got my point. But thanks for answering.
Waiting to hear more from you soon
Thanks,
Samantak.

Problems with installation SAP Netweaver ABAP 7.0

Hello, can someone give me an adice on installing SAP NetWeaver ABAP 7.0 trial version, please?
After installing the application server and SAP management konsole and stopping the application server following message pops up. The same message pops up after installing SAP GUI and starting the application server again.
Can this be caused by bad installation of MS Loopback Adapter on my Windows Vista?
===================================================
============== Stopping System NSP ================
===================================================
========= Stopping ABAP instance ====
23.05.2009 15:28:06
Stop
OK
23.05.2009 15:28:16
StopWait
OK
========= Stopping database instance ...
The MaxDB Database Stopper, Version 7.7.04.23
Copyright 2000-2008 by SAP AG
Error! Connection failed to node (local) for database NSP:
-24700,ERR_DBMSRV_NOSTART: Could not start DBM server.
-24701,ERR_EXHNDLR: Could not initialize exception handler.
-24748,ERR_FILEOPEN: Error opening file C:sapdbdatawrkdbmsrv_DATART-PC.err
-24826,ERR_NIERROR: Can not open file 'C:sapdbdatawrkdbmsrv_DATART-PC.err'.
(System error 5; Přístup byl odepřen.)
Error: Error while calling dbmcli
"C:sapdbprogramspgmdbmcli" -d NSP -u , db_offline -nc
============== Stop database failed !
Pokračujte stisknutím libovolné klávesy.
Please see how I installed MS Loopback Adapter:
Download the DevCon compressed file, and then extract the files:
a. Visit the following Microsoft Web site for download: DevCon
b. Save the Devcon.exe file to a folder on your computer, and then open the folder.
c. Double-click Devcon.exe.
d. In the Unzip to path box, type the folder where you want to unzip the files, and then click Unzip.
e. Click OK, and then Close to complete the unzip process.
2. Install the Microsoft Loopback Adapter:
a. At a command prompt, change directory to the folder where you extracted the DevCon files.
b. Change directory to the i386 folder.
c. Type devcon.exe install %windir%inf
etloop.inf *msloop, and then press ENTER. You see output that is similar to the following:
Device node created. Install is complete when drivers are updated...
Updating drivers for *msloop from C:WINDOWSinf
etloop.inf.
Drivers updated successfully.
Can someone help?
Thanks a lot.
Milan

Hi Milan,
I´m sorry but i think i´m not able to help you so much. I´ve just installed SAP in my Laptop but with XP-Professinal. At first i had some troubles too and at the end i had to reinstall it to make it run properly so i think i cannot help you very much. Sorry.
Despite this, take a look at the detailed instructions of how to set up MS Loopback Adapter when you execute the file start of the SAP installation. You can check if the MS Loopback adaptor is working or not. And do not forget to search messages in relation with errors (-24700,ERR_DBMSRV_NOSTART, etc...)
Maybe it´s a silly question but it´s really stopped the database ? when you open the SAP Console the server and the database are in grey ?
Joaquin Casas Baca-Castex

Netweaver ABAP 7.01 trial version

Hi folks,
I am new to Netweaver and trying to install Netweaver ABAP 7.01 trail version on my laptop. I have downloaded SAPNW7.01ABAPTrial.part1.rar AND SAPNW7.01ABAPTrial.part12.rar. As per the instructions trying to extract part1 ra.r file, it is not responding. The files show up in an unrecogniszable format. Am I missing something here?
How can I correct it and install successfully?
Thanks in advance,
VG

Hello,
Please use winrar to extract. You can download trial version from http://www.rarlab.com
Hope this helps.
Manoj
Edited by: Manoj Chintawar on Feb 12, 2009 5:20 PM

Logical system for client 001 for SAP NETWEAVER ABAP TRIAL VERSION for BI

Hi,
I have installed SAP NETWEAVER ABAP TRIAL VERSION for BI. In that I have to create logical system for client 001. I have taken a list of available clients from the abap R3 side. Here is a list of it.
Clients View
Cl. Name City Crcy
000 SAP AG Konzern Walldorf EUR
001 Auslieferungsmandant R11 Kundstadt USD
066 Test EarlyWatch Profiles Walldorf EUR
I cannot get inside the BW side for it asks me to create a logical system for client 001. What to do?
Kindly help me.
Kannan

hi,
? First log on to SAP R/3 server connections Go to SCC4 in R/3 & in Scc4 BW server. A screen opens in that logical name of the system would be opened in both (R/3 & BW).
? Take notepad in it save .R/3 & BW logical names go to R/3 & click SM59 to create R/3 connections click then a screen opens gives BW logical name in RFC Destination option & give connection. type 3 & give some description & then press enter.
? You will get another screen under it then at target host gives BW server name we will get it from BW logon change ID, IP address option & give the system no. The system no go to logon pad just drag it then you will see the name.
? Then click on log on securities go to log on give BW server details like No, client user Password. Then save it then click test connection tab if there are errors then it gives yellow color if they are no error the whole thing come as white.
? Then click on the Remote Logon then we go to BW server give RFC SM59 & click create. Then give the server name which is at the bottom right corner give it then give the no, name, password in logon Security save it & test connection & then remote logon.
? R/3 - B W - R/3
? Logical connection source system connection is used to transfer the data from R/3 to BW. Go to BW system& click RSA1 go to source system option go to top to the source systems right click on it. Then click create then a screens opens then.
? PC ?Flat file , DB ? Database
? Select the option manual then a screen appears RFC Destination, Logical source name then click OK then it goes to opens other screen save it test connection then remote login then it go back to the then a screen opens then click only activate.
? BW ? RS1 ? SOURCE SYSTEM ? CREATE MANUAL AUTOMATIC CELL
? R/3 ? Test connections login ? back ? replicate method ? active data R/3 Source system you will able to.
hope it helps u
Ramesh

SAP NetWeaver ABAP Trial 7.02 Win 64-bit Version (SP7)

i am using windows 7 can i able to install this
SAP NetWeaver ABAP Trial 7.02 Win 64-bit Version (SP7)
in my system ?
Moderator message : Moved from "ABAP General" to Trials, Previews & Other downloads.
Edited by: Vinod Kumar on Sep 14, 2011 3:34 PM

i am using windows 7 can i able to install this
SAP NetWeaver ABAP Trial 7.02 Win 64-bit Version (SP7)
in my system ?
Moderator message : Moved from "ABAP General" to Trials, Previews & Other downloads.
Edited by: Vinod Kumar on Sep 14, 2011 3:34 PM

Install Trial BO like SAP Netweaver ABAP Trial version

Hello, i would like to know if it´s possible to install some trial Version of BO in orther to install it in my laptop like i´ve just done with the SAP Netweaver ABAP Trial Version 701 (With SAP-BW 70).
I know that that there are some links to download BO software but i really don´t know where to start and if there is any problem with the installation on my laptop with MaxDB ans SAP server installed... basically i have installed SAP with BW in my laptop and it´s working ok. Wich software may i install and wich are the requirements if i want to practice with BO ?
I´ve just downloaded BO from the following link but it´s the correct one ?
http://www.businessobjects.com/forms/datasave.asp?id=701600000008kgy
Besides this i´ve just found another one
https://www.sdn.sap.com/irj/boc/business-objects-for-sap?rid=/webcontent/uuid/806c9894-42a5-2b10-648a-d900489b76da
Wich one i have to install ? it´s the same ? it works with OS XP-Pro ? anything else to install ?
Thanks in advance,
Best regards,
Joaquin Casas

Hi,
this should get you started:
Install Part #1
/people/ingo.hilgefort/blog/2008/09/17/businessobjects-and-sap--installation-and-configuration-part-1-of-4
Install Part #2
/people/ingo.hilgefort/blog/2008/09/17/businessobjects-and-sap--installation-and-configuration-part-2-of-4
Install Part #3
/people/ingo.hilgefort/blog/2008/09/17/businessobjects-and-sap--installation-and-configuration-part-3-of-4
Install Part #4
/people/ingo.hilgefort/blog/2008/09/17/businessobjects-and-sap--installation-and-configuration-part-4-of-4
SAP Authentication
/people/ingo.hilgefort/blog/2008/09/19/businessobjects-and-sap--configure-sap-authentication
Publishing part 1
/people/ingo.hilgefort/blog/2008/09/23/businessobjects-and-sap--publishing-of-crystal-reports-part-1-of-3
Publishing part 2
/people/ingo.hilgefort/blog/2008/09/24/businessobjects-and-sap--publishing-of-crystal-reports-part-2-of-3
Publishing part 3
/people/ingo.hilgefort/blog/2008/09/24/businessobjects-and-sap--publishing-of-crystal-reports-part-3-of-3
XC, CR and LO Part 1 of 4
/people/ingo.hilgefort/blog/2008/10/03/businessobjects-and-sap-part-1-of-4--creating-a-xcelsius-dashboard-on-top-of-sap-bi
XC, CR and LO Part 2 of 4
/people/ingo.hilgefort/blog/2008/10/07/businessobjects-and-sap-part-2-of-4--creating-a-xcelsius-dashboard-on-top-of-sap-bi
XC, CR and LO Part 3 of 4
/people/ingo.hilgefort/blog/2008/10/07/businessobjects-and-sap-part-3-of-4--creating-a-xcelsius-dashboard-on-top-of-sap-bi
XC, CR and LO Part 4 of 4
/people/ingo.hilgefort/blog/2008/10/10/businessobjects-and-sap-part-4-of-4--creating-a-xcelsius-dashboard-on-top-of-sap-bi
Technical Material
/people/ingo.hilgefort/blog/2008/11/19/businessobjects-integration-with-sap-netweaver-bi--technical-material
In regards to the supported platforms look at http://service.sap.com/bosap-support
Ingo

SAP Netweaver ABAP Trial Version password expired

Hi All,
I just got an installer for the SAP NetWeaver ABAP Trial Version and I was able to install the Trial version. However, my license have already expired. So what I did was is to renew the license. But my problem right now is that I can't logon using BCUSER. I'm getting "Logon not possible (error in license check".
During the time when I renew the license, i didn't encounter any errors or problems.
Could anybody tell me what I'm doing wrong?
How can I have BCUSER up and running since I need this account to practice ABAP?
I tried deleting the old license using SAP* user because I don't think it is possible to do using that user.
Thanks
James

I have had a similar issue but the above remedy did not fix my problem. I had successfully installed the trial version and used it until the license expired. After downloading a new license, I installed it using SAP*. The installation was successful however, when trying to login using BCUSER I am still getting that same error.
Under slicense, user sap*, I have the following:
NSP TEMPLICENSE NetWeaver_ADA 26.10.2008 25.01.2009 Perm DEMOSYSTEM 000000000311079138 Valid
Sorry for the sloppy cut&paste but you can see that the install appears to be valid.
Is my only recourse to uninstall and reinstall the trial version? Also, is there some way for me to backup any of the work I have done in SE80 before wiping the install?
Thanks in advance,
Rob

SAP Netweaver ABAP 7.01 Trail Version

Similar Messages

Maybe you are looking for