SAP netweaver and SAP r/3 system

All,
Could any one explain in simpler term that how Netweaver system is related with R/3 system?

Hi,
Sap netwever architecture has many advanced features when compared to the r/3 architecture, i found these links useful. see if they are of any help to you.
For R/3 Architecture
http://help.sap.com/saphelp_47x200/helpdata/en/6e/1c9eb35c2c11d29bda0000e8a47b2e/frameset.htm
For Netweaver Architecture
http://help.sap.com/saphelp_nw04s/helpdata/en/84/54953fc405330ee10000000a114084/content.htm
Regards
Rakesh.

Similar Messages

  • NetWeaver 2004 Installation without SAP R/3 System

    Hi,
    Can we install Netweaver 2004 without installing the SAP R/3 System ? If so , where can we get that software as trail version and how long will it work ? Does it contains WAS and J2EE Engine ? Can I Configure NWDS with this WAS and J2EE ?
    Can u please guide me ?
    Thanks,
    Suresh..

    sure,you can only install the nw platform without r/3 erp import;you can download it from sap servervice marketplace,without license ,you can use it 30days

  • How to connect SAP R/3- System with SAP NetWeaver Portal (2004s)?

    Hello to all,
    sorry, can someone help me? How can I connect SAP R/3- System with SAP NetWeaver Portal (2004s)?
    Thanks and regards,
    Galyna

    Hi,
    In previous link contain this info
    This describes how to connect an SAP R/3 system to SAP NetWeaver Portal using an iView
    1)      Go to System Administration
    2)      Go to System Configuration
    3)      Go to Portal Content (Right Side Panel), open that folder.
    4)      Right Click on Portal Content, a Panel is displayed select "System (from Template)".
    5)      That will display a new view on right side, now select "SAP system using dedicated application server" from
    the existing templates. (Other templates are possible - for example, load balanced or through a SAProuter connection string).
    For this exercise, we'll use the simplest type.
    6)      Choose next
    7)      Give the System Name and System Id (which are mandatory fields) incase you want to give any brief notes
    about the system then give them in the "Description" field.
    8)      Open the Newly Created System.
    9)      Now when you want to create a New System, you have to fill four Properties they are:
    "Connector" - contains basic connectivty details
    "Internet transaction Server (ITS) - if you wish to use SAPGUI for HTML and/or IACs",
    "Web Application Server" - if you wish to access BSPs and/or Web Dynpro for ABAP and
    "User Management".
    You also need at least one "System Alias" has to be defined from the Display drop down menu.
    Make sure you have set end user access in the Permissions drop down menu to all users who need to access the system
    10)  Select "Connector" property, now fill the required fields such as:
    a)      Application Host (should be fully qualified hostname) - Give the R/3 "Application Name",
    which can be obtained from the SAP Logon Pad (check what R/3 system you are using, right click on it , go to the properties,
    it will open a window which has the Application Server Name.
    b)      Logical System Name - Give the logical name as defined in the backend system
    c)      SAP Client - Check the Client in the backend system and give the appropriate number (3 digits)
    d)      SAP System ID(SID)* - Check the R/3 properties and give the check for System ID
    e)      System Type* - Since we are connecting to R/3, select SAP_R3 system.
    f)       System Number - This is a two digit number that you can find in the SAP Logon Pad
    11)  Select "Internet transaction Server (ITS)" property, now fill the required fields like
    a)      ITS Description à Give some Description
    b)      ITS Host Name - Same as "Application Host" of R/3 (when integrated ITS) and should be attached with the
    port number of ITS Server (to get port number detailed description is given below). ex: hostname : port number
    c)      ITS Path - To get the path along with the port number you have to Log on to R/3 system. Use the
    Transaction Code "SICF", it opens a new window go to:
          default_host -> sap -> bc -> gui -> sap -> its -> webgui -> SAP GUI for HTML -> right click on
    that and click "Test Service'. This will open a new window, on the address bar you will find the "port number", and
    the path something like (/sap/bc/gui/sap/its/webgui). Use the path after the port number.
    d)      ITS Protocol - There are two protocols "http" & "https", select the appropriate protocol which is
    visible when you opened "Test Service" window.
    12)  Select "Web Application Server" property , now fill the required fields like
    a)      Web AS Description -> Give some Description
    b)      Web AS Host Name - same as ITS Host Name
    c)      Web AS Path - usually /sap/bc/bsp/sapd)*    
    Web AS Protocol - should be same as the ITS Protocol.
    13)   Select "User Management" property, now fill the required fields like
    a)      Authentication Ticket Type - Since we are not using SSO leave the field
    empty i.e. put in select mode. (Please note that longer term you will probably want to use SSO)
    b)      Logon Method - Select UIDPW.
    c)      User Mapping Type - In case you have administration rights then you choose "admin" or in case you
    just have user rights then choose "user", better go for "admin/user".
    14)   Since all the required fields are filled appropriately now create a System Alias name, this can be done by following steps:
    a) go to Display -> Select "System Aliases" give some Alias Name, let's call it "SAP_R/3"
    15)  Now that System is created we have to create a iView which will display the given Transaction Code.
    16)  Go To "Content Administration".
    17)  Go To "Portal Content".
    18)  Go to Portal Content (Right Side Panel), open that folder
    19)  Right Click on Portal Content, a Panel is displayed select "New" -> iView
    20)  Select iView template, click next
    21)  Select "SAP Transaction iView" from the list of templates available. Click next.
    22)  Give the iView name and iView ID. Incase you want to give any brief notes about the iView then give it in "Description" field. Click next
    23)   Select "SAP GUI for HTML" radio button. Click next
    24)  Now select the system which you have create "SAP_R/3", give some Transaction Code, say SE12 (Dictionary Display). Click next and Finish.
    25)  Now Preview the iView
    26)  You will see a new Window where in SE12 Dictionary Display window is displayed.
    Regards,
    Senthil K.

  • "Only assign one SAP NetWeaver product version to product system"

    Greetings,
    Somehow, after upgrading my PI system from NW 7.11 to NW 7.4, the SAP-XICONS component was left at the lower version. Everything else was upgraded and SUM didn't complain about this component. The component was present in the stack.xml file and the SCA was available. Yet somehow it was missed.
    Now I am unable to use SUM to update the component. There seems to be no way to get the LMDB to reflect the actual versions of this system and have Maintenance Optimizer function.
    After I assigned everything in the LMDB, the Verification Check says "Only assign one SAP NetWeaver product version to product system". And then MOPZ gives errors such as: "Wrong Netweaver product version found SAP NETWEAVER 7.4" and "Multiple Netweaver Product Version were found".
    However, if I remove the assignment of 7.11, MOPZ is still unable to calculate the queue. It even gives the same errors.
    How can I fix this? Is there some other way to generate the stack or get SUM to upgrade the component?

    The root cause was MOPZ marking the component incorrectly in the stack XML.
    The resolution was to use telnet to 5xx08 to manually deploy the SAP-XICONS archive.

  • SAP NetWeaver and SAP ERP Central Component 6.0 installed or not,how to fin

    Hello Friends,
      I would like to know that in my system whether
    <b>     SAP NetWeaver  and SAP ERP Central Component 6.0</b>
      Installed or not?How to check whether these are installed or not?
    and where can i Find in the system?
    Regards
    Preethi

    Kinldy make  clear cut query before you look for an answer to that!
    To check for the WAS-J2EE Stack installation - kindly use the following link to access your WAS j22 Start page "http://hostname:5XX00" where XX will be the System No. for SAP System.
    Incase if you want to find out that you have a EP installed: goto:-
    "http://hostname:5XX00/irj"
    For XI , you can go to "http://hostname:5XX00/rep"
    Incase the links work properly the software component is installed.
    PREREQUISITE for the above CHECKS:
      1) The system number should be correct.
      2) The Fully qualified domain name should be used for the hostname.
      3) The Software components and the J2EE Stack should be operational.
    (ON the SAP SERVER)On OS level --> you can Go and have a look for the following directories existence --->
      1)  usr/sap/SID/DV*.../j2ee,
      2) usr/sap/SID/DV*.../SDM
    This means that you have atleast the Java Stack installed on your SAP Server.
    Next in the task manager(WINDOWS) / process level(UNIX) you can check if you have process "jlaunch process under the sidadm owner".
    In SAP Frontend-GUI :
    You can login and go to T-Code ST11 and check for the log files
    dev_disp, dev_dispatcher, dev_server0, dev_jcontrol, dev_bootstrapID.......,
    these file will give you info regarding the J2ee stack and its components....
    Hope this helps you...
    Regards,
    Prem

  • Integration of SAP R/3 system with BOXI3.0 and SAP EP

    Hi experts,
         I have a requirement like getting data from SAP R/3 system and make it as Xcelsius Dashboard.
    So i have installed BOXI3.0, SAP Integration Kit, Live Office, Crystal Report and Xcelsius. Then i have followed this blog /people/ingo.hilgefort/blog/2008/09/19/businessobjects-and-sap--configure-sap-authentication . In this blog explined about how to connect BI System but i want to connect SAP R/3 system.
    1. What is purpose of Role import option?
    2. What is the type of role i need to import for connecting R/3 system?
    3. Do i need to create any specific role for this?
    4. How do i integrate Xcelsius dashboard with portal?
    Please help me.
    Regards,
    Kumar.

    Hi Kumar,
    did you follow the installation guide for the SAP Kit and configure all parts of the publishing ?
    if so check all configuration steps to see where it fails.
    you can also look here:
    Install Part #1
    /people/ingo.hilgefort/blog/2008/09/17/businessobjects-and-sap--installation-and-configuration-part-1-of-4
    Install Part #2
    /people/ingo.hilgefort/blog/2008/09/17/businessobjects-and-sap--installation-and-configuration-part-2-of-4
    Install Part #3
    /people/ingo.hilgefort/blog/2008/09/17/businessobjects-and-sap--installation-and-configuration-part-3-of-4
    Install Part #4
    /people/ingo.hilgefort/blog/2008/09/17/businessobjects-and-sap--installation-and-configuration-part-4-of-4
    SAP Authentication
    /people/ingo.hilgefort/blog/2008/09/19/businessobjects-and-sap--configure-sap-authentication
    Publishing part 1
    /people/ingo.hilgefort/blog/2008/09/23/businessobjects-and-sap--publishing-of-crystal-reports-part-1-of-3
    Publishing part 2
    /people/ingo.hilgefort/blog/2008/09/24/businessobjects-and-sap--publishing-of-crystal-reports-part-2-of-3
    Publishing part 3
    /people/ingo.hilgefort/blog/2008/09/24/businessobjects-and-sap--publishing-of-crystal-reports-part-3-of-3
    on the ID : each object receives an ID on BusinessObjects Enterprise. You can look at the documentation and search for the CUID or GUID.
    Ingo

  • What is data archiving and DMS(Data Management System) in SAP

    what is data archiving and DMS(Data Management System) in SAP
    Welcome to SCN. Before posting questions please search for available information here and in the web. Please also read the Rules of Engagement before further posting.
    Edited by: kishan P on Aug 31, 2010 1:06 PM

    Hi,
    Filtering at the IDoc Level
    Identify the filter object (BD59)
    Modify the distribution model
    Segment Filtering
    specify the segments to be filtered (BD56)
    The Reduced IDoc Type
    Analyze the data.
    Reduce the IDoc type (BD53)
    Thanks and regards.

  • IDES and other Clients in one SAP ERP 2005 System

    Hello everybody,
    within a project for my master thesis i have to set up an SAP ERP 2005 System. This system should contain at least three clients. One of them should be the IDES client. Another client should be set up with an existing template. The third client should represent a smal company or at least i should set up some example process from the company (there is no need to map the whole company in the system). These processes should be realized with the SAP standard processes and they should just show how to map easy processes to SAP ERP. Neither the second nor the third client need to run in a productive environment, everything is just for training and testing.
    My main Questions are:
    I've already set up the SAP ERP 2005 System but without IDES. Can I still integrate the IDES Content or do i have to reinstall the whole System with a complete IDES Installation?
    Can I implement the second and third client in the same ERP System (where the IDES client is) or do i need different Systems for it? Even if there is no productive use for the clients we would like to have a Development and a Quality Landscape. Is this possible with the IDES client? Actually I have two fast machines for this purpose - one for quality and one for development.
    I would be very grateful for any hints.
    Thanks a lot.
    Regards,
    Martin

    Hi,
    You can use SAP IDES as Dev and Quailty.There is no diffrence in full sap or IDES .In IDES we have some pree configure Clients and full Ecc we have three client 000,001 and 066.
    So you can use SAP IDES as DEV.
    Your Question :I've already set up the SAP ERP 2005 System but without IDES. Can I still integrate the IDES Content or do i have to reinstall the whole System with a complete IDES Installation?
    Ans : you install diffrent mechine.We do't use any content.Do reinstall
    Thanks
    Pankaj Kalsayan

  • SAP Cloud Application Studio Create Custom Web Service From Custom Business Object and Consume in External System

    Hi Experts,
    I have requirement to create custom business object and create Web Service for that and use in external system (SAP ECC / SAP CRM / Third Party).
    1) Is it possible to create custom object web service and used in external system ?
    2) When we create the Web service from custom business object what the necessary steps(action : Create , Read , Update) require?
    3) Sample Scenario :
    My Custom Business Object
    businessobject Custom_Integration {
      element EP_VAL1 : LANGUAGEINDEPENDENT_MEDIUM_Text;
      element EP_VAL2 : LANGUAGEINDEPENDENT_MEDIUM_Text;
      element IP_RES : LANGUAGEINDEPENDENT_MEDIUM_Text;
    I have created the Web Service using this custom business object.
    3) How i can use this web service in external system? what are the prerequisite steps in external system to consume this service in it?
    Please anyone have idea about this how to do this and how to achieve this using SDK and custom business object.
    Many Thanks
    Mithun

    Hello Mithun,
    Does this section in the documentation help you:
    SAP Cloud Applications Studio Help -> Developers Desktop -> Web Services
    The entry "Task -> Create a Web Service" describes how to create a Web Service on your own BO
    The entry "Task -> Test a Web Service" helps you how you can use it in a foreign tool / application.
    HTH,
       Horst

  • Migrating an SAP 4.7x110 system on W2003 32-bit to a 64-bit host (x86_64)

    We want to migrate an SAP 4.7x110 system on Windows Server 2003 32-bit to a 64-bit host (x86_64). Afterwards we want to upgrade the system to ECC 6.0.
    According to PAM, 4.7x110 is not supported on Windows 64-bit.
    According to note 960769,
    "After the migration to the 64-bit hardware, your SAP system may have a status that is not supported by SAP for productive use (see Note 814834). You may need to upgrade to a new SAP release. In this exceptional circumstance, SAP offers support for the duration of the upgrade.  Note that SAP does not support a longer, more productive use of such a system for the period after the migration and before the upgrade....
    ...We generally recommend to use SQL Server 2005 (64-bit) for the productive use on x86_64. However, the 32-bit operation of SQL Server 2000 on Windows x86_64 64-Bit (supported by Microsoft) is also supported by SAP...
    ...The following table illustrates which OS/DB combination supports each SAP release in the target system.
    Source System   Target System (Kernel, DB Software)     Support Comment
    3.1I   3.1I 32-bit, MSSQL 2000 32-bit    only for upgrade (a,c)
    4.0B   4.0B 32-bit, MSSQL 2000 32-bit    only for upgrade (c)
    4.5B    4.5B 32-bit, MSSQL 2000 32-bit    only for upgrade (c)
    4.6C   4.6D 32-bit, MSSQL 2005 64-bit     productive (b)
    620   640 64-bit,  MSSQL 2005 64-bit    productive (b)
    640   640 64-bit,  MSSQL 2005 64-bit    productive (b)
    700   700 64-bit,  MSSQL 2005 64-bit    productive (b) "
    According to note 814834,
    "SAP supports the x86_64 platform on Windows 2003 Server SP1 x64 for kernel 4.6D and kernel 6.40 and higher. ... For product versions based on kernel 6.40 and higher, only 64-bit operation is supported."
    According to note 905634, about SQL Server 2005 support (where a mention to R3E 4.7 x110 is missing)
    "Supported SAP products based on SAP_BASIS 6.20 and SAP_BASIS 6.40
    Product Windows platforms
    BW 3.10 x86, IA-64
    SCM 4.0 x86, IA-64
    EBP/CRM 4.0 x86, IA-64
    ECC 5.0 SR1 x86, IA-64, x64
    NetWeaver'04 SR1 x86, IA-64, x64
    SCM 4.1 x86, IA-64, x64
    SRM 4.0 SR1 x86, IA-64, x64
    CRM 4.0 SR1 x86, IA-64, x64
    R3E 4.7 x200 SR1 x86, IA-64, x64
    SolMan 3.2 SR1 x86, IA-64, x64 "
    +//////////////////////+//
    According to all this information, may I move our 4.7x110 system onto a Windows Server 2003 SP1 64-bit, SQL Server 2005 64-bit, and after that we would upgrade to ECC 6.0?
    Thanks !!!
    Eva
    Edited by: Eva Verdaguer on Jul 25, 2008 12:41 PM

    Sorry, I forgot posting the SAP answer, which is also "Yes":
    30.07.2008 - 16:19:00 CET - Respuesta by SAP     
    Dear Eva,
    Yes, you can move to the 64 bit platform with SQL Server 2005 according
    to note 960769.
    Information in note 905634 means there is no installation DVD for
    release 47x110 for SQL Server 2005. So it is not possible to do a fresh
    installation of 47x110 except if you follow the workaround of note
    899111 (for x64).
    Best Regards,
    Manuel García Guardiola
    SAP Active Global Support - Netweaver Web Application Server
    ****************************************************************+
    Thanks very much for your message, anyway.
    Regards !!
    Eva

  • How to extract Inventory data from SAP R/3  system

    Hi friends How to extract Inventory data from SAP R/3  system? What are report we may expect from the Inventory?

    Hi,
    Inventory management
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/how%20to%20handle%20inventory%20management%20scenarios.pdf
    How to Handle Inventory Management Scenarios in BW (NW2004)
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
    Loading of Cube
    •• ref.to page 18 in "Upgrade and Migration Aspects for BI in SAP NetWeaver 2004s" paper
    http://www.sapfinug.fi/downloads/2007/bi02/BI_upgrade_migration.pdf
    Non-Cumulative Values / Stock Handling
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/93ed1695-0501-0010-b7a9-d4cc4ef26d31
    Non-Cumulatives
    http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/da1640dc88e769e10000000a155106/frameset.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a62ebe07211d2acb80000e829fbfe/frameset.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a62f8e07211d2acb80000e829fbfe/frameset.htm
    Here you will find all the Inventory Management BI Contents:
    http://help.sap.com/saphelp_nw70/helpdata/en/fb/64073c52619459e10000000a114084/frameset.htm
    2LIS_03_BX- Initial Stock/Material stock
    2LIS_03_BF - Material movements
    2LIS_03_UM - Revaluations/Find the price of the stock
    The first DataSource (2LIS_03_BX) is used to extract an opening stock balance on a
    detailed level (material, plant, storage location and so on). At this moment, the opening
    stock is the operative stock in the source system. "At this moment" is the point in time at
    which the statistical setup ran for DataSource 2LIS_03_BX. (This is because no
    documents are to be posted during this run and so the stock does not change during this
    run, as we will see below). It is not possible to choose a key date freely.
    The second DataSource (2LIS_03_BF) is used to extract the material movements into
    the BW system. This DataSource provides the data as material documents (MCMSEG
    structure).
    The third of the above DataSources (2LIS_03_UM) contains data from valuated
    revaluations in Financial Accounting (document BSEG). This data is required to update
    valuated stock changes for the calculated stock balance in the BW. This information is
    not required in many situations as it is often only the quantities that are of importance.
    This DataSource only describes financial accounting processes, not logistical ones. In
    other words, only the stock value is changed here, no changes are made to the
    quantities. Everything that is subsequently mentioned here about the upload sequence
    and compression regarding DataSource 2LIS_03_BF also applies to this DataSource.
    This means a detailed description is not required for the revaluation DataSource.
    http://help.sap.com/saphelp_bw32/helpdata/en/05/c69480c357354a8846cc61f7b6e085/content.htm
    http://help.sap.com/saphelp_bw33/helpdata/en/ed/16c29a27db6e4d81a015be8673eb80/content.htm
    These are the standard data sources used for Inventory extraction.
    Hope this helps.
    Thanks,
    JituK

  • SAP R/3 System Installation

    Hi,
    I am new to SAP. I would like to learn SAP R/3 system and practice that from my home.
    So what type sap gui should I download in my PC and where can I get that downloads? I need the sap gui with help options too.
    Can I download only IDES?
    What is the system requirements to download the sap gui?
    Thanks & Regards,
    Kalai
    Message was edited by:
            Kalaivani Pachiappan

    Hello Kalai,
    I would propose to download the SAP NetWeaver 7.0 Trial Version ABAP SP12 available at:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/b2918eea-0601-0010-6284-e6cb7eee4399 [original link is broken] [original link is broken]
    You need to download both files, place it in the same folder and extract part1 only using a rar-archive tool.
    This download includes all you need to start: application server, database, sap gui.
    Regards,
    Klaus

  • Integrating SAP into a Systems Analysis course

    Hi,
    I am part of a group putting together a proposal to integrate SAP into our business school courses and join the UA.  The faculty do not have any training in SAP, but we are looking to find out as much as we can about possible course modules for our proposal.
    I was wondering if anyone had suggestions or Best Practices for integrating into SAP into a Systems Analysis course for MIS students (not Computer science students)?  For our proposal we are are looking to develop a timeline for different levels of integration at the first, third and fifth year of our SAP use.  What would be the best materials to integrate into a 15 week semester undergrade course where the emphasis is on the system development lifecyle up to, but not including hands-on system design?
    From scanning the overviews of library materials, it looks as though the following might be possibilities (although as a guest I don't have access to the full materials):
    Using Solution Manager (for the project mgt component of the course)
    Business Process Integration Overview
    Concepts in ERP using Fitter Snacker
    ERP simulation game
    Netweaver workflow exercises
    Any feedback and tips for a starting point would be appreciated.
    Priscilla
    Assistant Profesor of MIS

    Priscilla,
    I have used every one of the resources that you list in your post.  I've used all but Solution Manager in my classes.  I can't say that I see how any of them relate the SDLC.  As noted, ASAP would be relevant, but for an introductory level course (where students have no knowledge of SAP), I don't think that it is something I would recommend. 
    I've been trying to come up with something that would fit with covering the SDLC specifically, and I've not had much success.  One could perhaps do some things with Visual Composer that would illustrate some of the stages of development, but the existing resources aren't really oriented towards that narative.  I'll be interested to see if anyone else posts here with ideas.
    One of the resources you've listed in your postERPsimhas nothing at all to do with development, but if you are looking at integrating SAP as a new resource into business-oriented classes, it is well worth investigating.  I'm not sure how it might match up with your needs, but it is a very excellent vehicle for introducing ERP concepts to students in a very meaningful and interesting way.
    I wish you well in your exploration of resources.  As I can answer other questions, I'm happy to.  I'm sure others around here may do so as well.

  • Export SAP GUI Logon system properites to another laptop

    Hi, SDN Fellows.
    I want to run SAP GUI logon systems in another laptop. After installing a new SAP GUI client. Instead of re-add the logon system properties, is that a way I can export and import from another laptop? Say I have 10 logon system properties (some with application server and some with logon groups), how do I pick the 8 of 10, and export to another SAP GUI in another laptop?
    Thanks,
    Kent

    Hello Kent,
    for SAP GUI for Windows 6.20 or 6.40, please have a look at [SAP note 512040|https://service.sap.com/sap/support/notes/512040], for SAP GUI for Windows 7.10 refer to [SAP note 1035560|https://service.sap.com/sap/support/notes/1035560] and for SAP GUI for Java please read chapter 7 of the manual included in the SAP GUI for Java installation.
    Best regards
    Rolf-Martin

  • Connection from SAP to our systems involving 2 saprouters

    connection from SAP to our systems involving 2 saprouters
    we have 1 saprouter inside a dmz and another for connecting to our systems.
    we are guessing that this is possible
    SAP (sapserv2) -
    SNC----> saprouter1 (DMZ, SNC connection) -
    > saprouter2 (P * * 3200) ---> SAP1, SAP2...
    But how could we do that?
    How can we let SAP know that they need to connect to 2 saprouters instead of 1?
    The "Mantain System Data" in sap service marketplace only lets us introduce 1 saprouter.
    And how should be the saproutettab of the 2 saprouters?
    saprouter1:
    KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 000.00.00.00 *
    P * saprouter2 3299
    saprouter2:
    P * * 3200
    P * * 3600
    is that possible?
    Many thanks !!

    Hi
    As far as my experience goes with this you have to maintain both router information in oss1 tcode
    Also mention second router on the second router tab on the SMP data
    I hope it should work with that as it will automatically create router table

  • Middleware problem -Outbound queue is stuck in SAP R/3 system with message

    Hi Middleware gurus ,
    We are stuck with a serious issue . We are trying to download Business partners from SAP R/3 4.6c system to SAP CRM 5.2 system using CRM Middleware
    Previously we did a successful Initial download of 2 Business partners from SAP R/3 to CRM . Their BP numbers in CRM are 001 and 002 . The Delta load is working fine for the both the BPs which are already downloaded
    Now , the real problem is when we are trying to download a new Business partner . When we set the Filter ( BP no 003 ) in MW adaptor object CUSTOMER_MAIN and start the Initial load again , we see that the Outbound queue is getting stuck with message “STOP” .
    There are two queues generated in SAP R/3 system with names “MASS_CRM_CUSTOME” and “R3AD_CUSTOME” . The status for both the queues is “STOP” and when go for details it mentions “sapsuck ..SAPMSSY1 “ -Message no. SR 053.
    Even we checked the txn SMW01, the Bdocs message is "Recived ( Intermediate state) " for Bdoc type BUPA_MAIN.
    We really don’t as to why the Initial load worked fine with 2 BPs  and later when want to do more BP Initial Load the Outbound queue is getting stuck
    Also , by unlocking the 2nd queue “R3AD_CUSTOME” we are able to release it , but the first queue “MASS_CRM_CUSTOME*” is stuck
    Please help us urgently
    Regards
    Dinesh and Ritvij
    Email : [email protected]
    Mobile -+91=9704933315

    Hi Praveen and other Middleware gurus,
    We checked on this . Actually the RFC is used for connecting to SAP R/3 system.
    We also raised an OSS message on this and found a reply that in transaction CRMM_BUPA_MAP, we can map the required BP . But the SAP support guy recived an error received the error:
    An RFC link is not maintained in the Middleware
    Message no. CRM_BUPA_MAPPING051
    We have set the RFC link , but still the problem continues!!!
    Please help further..
    Regards
    Dinesh and Ritvij

Maybe you are looking for

  • Alert in integration process

    Hi, is it possible to use alert-monitoring in the integration process? Does anybody know if there exist a blog of this theme? Thanks. Regards. Stefan

  • Can I use file names from some folder to specisfly a value of a variable

    so here is the thing I want to do: I've got like 3 variables in my swf file which value tells to the code how many picture there are to load. So I have like var totalPics:Number = 5 in my folder images I have 5 pics, but I want to put 3 more so I wan

  • Stuck on 'Media Pending' PP CC 2014 8.0

    After the first import of all my MXF files into Premiere Pro CC 2014, it's now stuck on 'Media Pending' since I reopened the project. Cleared cache etc to no avail, seems to be a common issue but I haven't came across a solid fix yet, anyone else hav

  • Incomplete migration of Elements 10--help!

    I have Elements 10 on my MacBook.  I am trying to migrate it to my I-mac which has no DVD port.  Migration Ast. does it's thing and says trasfer is complete but when I open Elements on the new computer I get a message saying "Online services cannot b

  • Windows 7 problem connecting to Aironet 1130AG AP

    We currently have Windows XP Pro laptops that are configured to connect  with our Cisco Aironet 1130AG Access Point and everything works fine.  I am  trying to configure new Windows 7 laptops using the same settings we  used for the XP Pro laptops an