SAP Netweaver Rapid Installer

I was looking at the SDN main page, and saw the SAP Netweaver Rapid Installer. This looks nice, and I would like to try it, but it isn't available via SAP Service.
Do I have to request the DVD? I work for a SAP Partner but it is always harder to request hard copies...

Hi Joao,
it is always a good idea to let those people know who posted the message. Vera posted her email adress on SDN to give you a feedback channel - and it is not very common that our people give you direct connection - use it.
Regards,
Benny
PS: I let her already know about this question

Similar Messages

  • Installation - [Netweaver Rapid installer 2004s] ERROR - CJS-30150

    Hi,
    Our team had the following issue with the Netweaver Rapid installer 2004s.
    The installer runs fine until the following error pops up during Step 39 of 51 (Preprare to install minimal configuration) under STEP 4 (Execute service) of the rapid installer.   
    ERROR 2006-09-01 20:01:39
    CJS-30150  Java processes of instance KL1/JC01 [Java: UNKNOWN] did not reach state PARTRUNNING after 20:30 minutes. Giving up.
    ERROR 2006-09-01 20:01:39
    FCO-00011  The step startJava with step key |rapidinstaller|ind|ind|ind|ind|0|0|SAP_Software_Features_Configuration|ind|ind|ind|ind|7|0|NW_Call_Offline_CTC|ind|ind|ind|ind|7|0|startJava was executed with status ERROR .
    We are unable to proceed with the installation. The Retry option also fails. The error comes up after about 30 minutes. The status bar displays the following.
    "Starting KL1/JC01 [Java:UNKNOWN] Elapsed Time XX:XX minutes"
    The PC configuration has only 2GB of RAM . It does not have the recommended 3GB of RAM. Could this be the issue or is it some other reason?
    Any advice is greatly appreciated.
    Pradeep.
    Chief Solutions Architect.
    SGIT, Sri Lanka.

    Hi Harsha,
    Please read note "Note 110172 - Windows: Transactions with large storage requirements" which says what i told you. Here is the part of this note.
    Note mentions that there is a solution for windows servers to enable 3 GB per process.
    Memory problems with background programs, Memory Management under Windows, 32-bit Windows
    Reason and Prerequisites
    A maximum of 1.2 - 1.5 GB was previously available for a program in the 2 GB address space under 32-bit Windows. The rest of the address space is either used by Shared Memory buffers, program data and loaded DLLs or is too heavily fragmented.
    Solution
    To enhance or optimally utilize your address space, the following steps are necessary:
          1. Install your Windows operating system again or set it up again.
          The Windows Server operating system family provides a 3 GB address space for each process with a specific boot option. Programs which are to use this 3 GB address space, must be prepared by a flag in program header. To do this, Windows must be installed again, or an already existing Windows version must be set up according to the Microsoft guidelines.
          2. Activate the 3 GB boot option according to Microsoft KB article 283037.
          3. Import the current kernel patch for your SAP system, and note the following details for your SAP system:

  • Netweaver Rapid Installer

    Hi all,
    i have installed the Portal using the netweaver rapid installer and everything went fine, after that i launched the sapinst one more time and this time chose the configuration part the Self Service packages without PSS
    however the installation is stops while it is still taking the parameters with the following error
    Execution of the command "C:\j2sdk1.4.2_12\bin\java.exe -classpath C:/usr/sap/XSS/JC01/j2ee/cluster/server0/apps/sap.com/tclmctcutilbasic_ear/servlet_jsp/ctc/root/WEB-INF/classes com.sap.ctc.util.ConfigMainExt com.sap.ctc.util.Verifying;MAINTAIN_JCO_DESTINATION;NAME=SAP_R3_Financials,CLIENT=,MSGSERVERNAME=,SYSTEMNAME=,USER=,PASSWORD=,LOGONGROUP=PUBLIC,USERTYPE=SSO,SLDHOST=netweaver,SLDPORT=50100,SLDUSER=SLDDSUSER,SLDPASSWORD=des19(80|24|150|247|101|200|181|119|);CHECK netweaver:50100 Administrator XXXXXX" finished with return code 0. Output:
    TYPE=A<BR>STATE=<BR>INFO_SHORT=com.sap.lcr.api.cimclient.LcrException: com.sap.lcr.api.cimclient.LcrException: CIM_ERR_NOT_FOUND: No such instance: SAP_J2EEEngineCluster.CreationClassName="SAP_J2EEEngineCluster",Name="XSS.SystemHome.netweaver"
         at com.sap.lcr.api.cimclient.SimpleResponseAnalyser.raiseExceptionOnError(SimpleResponseAnalyser.java:120)
         at com.sap.lcr.api.cimclient.SimpleResponseAnalyser.getIResult(SimpleResponseAnalyser.java:53)
         at com.sap.lcr.api.cimclient.CIMOMClient.sendImpl(CIMOMClient.java:218)
         at com.sap.lcr.api.cimclient.CIMOMClient.send(CIMOMClient.java:146)
         at com.sap.lcr.api.cimclient.CIMOMClient.getInstance(CIMOMClient.java:572)
         at com.sap.lcr.api.cimclient.CIMClient.getInstance(CIMClient.java:1250)
         at com.sap.lcr.api.sapmodel.SAP_J2EEEngineClusterAccessor.getInstance(SAP_J2EEEngineClusterAccessor.java:92)
         at com.sap.lcr.api.sapmodel.SAP_J2EEEngineClusterAccessor.getInstance(SAP_J2EEEngineClusterAccessor.java:78)
         at com.sap.ctc.util.Verifying.maintainJcoDestinationCheck(Verifying.java:1271)
         at com.sap.ctc.util.Verifying.performCheck(Verifying.java:275)
         at com.sap.ctc.util.ConfigServlet.doGet(ConfigServlet.java:70)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    //     => Error while obtaining JCO connection.
          + com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.getJCOClientConnection(SystemLandscapeFactory.java:149)
          + com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.getJCOClientConnection(SystemLandscapeFactory.java:157)
          + com.sap.tc.webdynpro.services.sal.sl.api.WDSystemLandscape.getJCOClientConnection(WDSystemLandscape.java:41)
          + com.sap.ctc.util.Verifying.maintainJcoDestinationCheck(Verifying.java:1233)
          + com.sap.ctc.util.Verifying.performCheck(Verifying.java:275)
          + com.sap.ctc.util.ConfigServlet.doGet(ConfigServlet.java:70)
          + javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
          + javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
          + com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
          + com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
          + com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
          + com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
          + com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
          + com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
          + com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
          + com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
          + com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
          + com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
          + com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
          + java.security.AccessController.doPrivileged(Native Method)
          + com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
          + com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
         + Checking SLD content ...
          + SLD ping to http://netweaver:50100 OK.
          + Cluster Name:XSS.SystemHome.netweaver
    is there something that should be configured before running the configuration ?
    I also couldnt find any installation guides so could some please share his knowledge.

    Hi,
    You should contact SAP to get the software. Netweaver Rapid Installer is optimized to run on 2 Hardware configurations (SUN for Unix and HP for Win-based).
    (for Sun have a look at http://www.sun.com/third-party/global/sap/solutions/rapidinstaller.html )
    Regards,
    Igor.

  • How can i exend my Sneak Preview SAP NetWeaver 04s installation ?

    Hi,
    My license is valid up to: 26.04.2006. I would like to extend it for a couple of months.
    How can i get a new License Key ? I have been told by [email protected] to ask my question via this forum.
    Thank in advance !
    A+
    Michel R. Osborne,  [email protected]
    Certifié SAP Basis - Spécialiste SAP NetWeaver
    Directeur Associé - DMR Conseil/Fujitsu

    Hi Michel,
    Nice to hear the problem is solved. Also you may close the
    message so as to indicate its solved.
    Please do reward points for replies that help
    Regards
    Srikishan

  • Warning or Error in SAP NetWeaver XI installation..

    I have windows 2003 enterprise edition with SP1
    i have completed installing Central instance
    now when i try to install the DB instance i get the following warning..
    <b>Warning after checking DB instance on "systemname"
    Only enterprise edition is supported in production environment</b>
    as i go ahead with the installation of the database instance i get the following:
    "An error occured during the installtion of the component SAP Net Weaver........"
    I click on the "view log" button
    and this is the error
    "E:/Export/DATA does not exist"
    PLease assist me resolving this error

    Well does it exist?

  • SAP Netweaver 2004s installation Error

    need help, during the installation of NW04s i encountered this error when adjusting nametab process. see details below.
    WARNING 2007-06-23 23:16:27
    Execution of the command "/usr/sap/BIW/SYS/exe/run/dipgntab -rwr40 -srctt DDNTT -srctf DDNTF -dsttt DDNTT -dsttf DDNTF -ttonly TT" finished with return code 255. Output: ERROR in initialization (can't get SVERS-version)ERROR in initialization (can't get SVERS-version)
    ERROR 2007-06-23 23:16:27
    CJS-30023  Process call '/usr/sap/BIW/SYS/exe/run/dipgntab -rwr40 -srctt DDNTT -srctf DDNTF -dsttt DDNTT -dsttf DDNTF -ttonly TT' exits with error code 255. For details see log file(s) dipgntab.log.
    ERROR 2007-06-23 23:16:27
    FCO-00011  The step adjustNametab with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_Postload|ind|ind|ind|ind|10|0|NW_Postload_DB6|ind|ind|ind|ind|5|0|adjustNametab was executed with status ERROR .
    thanks in advance,
    jemill

    Hello,
    We encountered the same issue...
    The solution was stated above...The installation log showed the following error...
    D:\usr\sap\SD1\SYS\exe\uc\NTAMD64\dipgntab -rwr40 -srctt DDNTT -srctf DDNTF -dsttt DDNTT -dsttf DDNTF -ttonly TT" finished with return code -1
    Inside the dipgntab log file the following error was being reportedu2026
    ERROR in initialization (can't get SVERS-version)
    We then went to the command prompt to run the command that was failing manually...we added the-trace 4 tab to the end to enable additional logging.
    D:\usr\sap\SD1\SYS\exe\uc\NTAMD64\dipgntab -rwr40 -srctt DDNTT -srctf DDNTF -dsttt DDNTT -dsttf DDNTF -ttonly TT -trace 4 tab
    In our case, the installation program was looking for the u201Cdbmssslib.dllu201D in the u201CD:\usr\sap\SD1\DVEBMGS00\exeu201D folder. 
    ERROR => DlLoadLib: LoadLibrary(D:\usr\sap\SD1\DVEBMGS00\exe\dbmssslib.dll)
    Error 126 [dlnt.c       241]
            Error 126 = "The specified module could not be found."
    ERROR in initialization (can't get SVERS-version)
    The exe folder did not yet exist.  I then manually created the exe folder and copied the dbmssslib.dll and dbmssslib.pdb from the kernel directory and resumed.
    The installation then completed successfully.

  • SAP Netweaver 7 installation on VMWARE

    Hi,
    I am trying to install SAP NW7 on VMware
    local PC having windows7 , so downloaded VMWARE and installed and creatd  a new vm machine and installed windows 2003.
    connected external HD and create virtual machine in external HD.
    steps:
    installed VMWARE n local m/c
    created VM on exter HD
    installed windows 2003 on VM.
    320 gb configured and partition done..
    now the issue is
    I wanna install SAP NW7 on it , first of all i wanna copy the dump to virtual machine
    how can I copy thre dump to virtual machine and start installation?
    Regards,
    Sai Battula.

    Hi,
    This thread should help:
    http://communities.vmware.com/message/452844
    Prefer the shared folder mechanism for bigger files like dumps etc. Once copied, start the SAPInst to proceed with installation.
    Regards,
    Srikishan

  • SAP netweaver java installation sneak preview

    I am installing java sneak preview with maxdb database trial version and installation continues forever it's been running more than 24 hours and sapinst log does not give any errors I do not know what to do? Can anyone help me. even i do not see any hard disk consumption more that 2 or 3 GB. I have 150 GB hard drive and 2 GB RAM.
    thanks

    hello,
    please check your database site. during import, sapinst must create database objects (tables, indexes) and insert rows to these objects. if your installation continues, also you can see detailed info about newly created database objects. if there is a problem related to database, also there must be an entry for error.
    there is not a specific duration for installation. it depends on your system resources, especially ram of server.
    but, you are right, your  installations' duration is very long.

  • Rapid Installer CD label SAP:RAPID_J2ee-cd:700:j2ee-cd:J2EE-CD:*

    I have downloaded package 51033323 SAP Rapid Installer NW 7.0 SPS14 1 to 8 and ran into the error message particularly the error message showed--Install is looking for the package with CD label SAP:RAPID_J2ee-cd:700:j2ee-cd:J2EE-CD:*.  Is this CD label bundled with the download?
    Documentation indiactes that SAP Netweaver 7.0 Rapid Installer for SPS14 is two DVD's.  The second DVD has ( Java Load with app. 4GB)  What are the equivalent package numbers that should be downloaded.
    Thanks.

    Hi Rashmi, I am having the same problem, did you find a answer for your question?

  • SAP NetWeaver CE 7.2 Installation error in Deploying java component phase

    Dear Experts,
                        I am installing CE7.2 but i am getting error in 37th phase (DEPLOY JAVA COMPONENT). Error message as
    An error occurred while processing option SAP NetWeaver Composition Environment (CE) 7.2
    > Installation Options > Application Server Java > Standard System > Standard System(
    Last error reported by the step :Execution of Deploy Controller Runner tool '/tmp/sapinst_instdir/NW72/INSTALL/NW72/ORA/STD/sapjvm/sapjvm_6/bin/java -
    classpath /tmp/sapinst_instdir/NW72/INSTALL/NW72/ORA/STD/install/lib:
    /usr/sap/CE1/SYS/global/security/lib/tools/iaik_jce.jar:
    /usr/sap/CE1/SYS/global/security/lib/tools/iaik_jsse.jar:
    /usr/sap/CE1/SYS/global/security/lib/tools/iaik_smime.jar:
    /usr/sap/CE1/SYS/global/security/lib/tools/iaik_ssl.jar:
    /usr/sap/CE1/SYS/global/security/lib/tools/w3c_http.jar:
    /usr/sap/CE1/J00/j2ee/j2eeclient/sap.com~tc~exception~impl.jar:
    /usr/sap/CE1/J00/j2ee/j2eeclient/sap.com~tc~je~clientlib~impl.jar:
    /usr/sap/CE1/J00/j2ee/j2eeclient/sap.com~tc~logging~java~impl.jar:
    /tmp/sapinst_instdir/NW72/INSTALL/NW72/ORA/STD/install/lib/tc~je~cl_deploy.jar
    -Xmx256m -Ddc.api.verbose=false
    com.sap.engine.services.dc.api.cmd.Runner
    deploy -l /tmp/sapinst_instdir/NW72/INSTALL/NW72/ORA/STD/deploy.lst -e stop -u lower
    -w safety --lcm bulk -t 14400000 --host sapnce --port 50004' aborts with return code 104.
    Error message is 'undefinedStatus:InitialDescription:. SOLUTION: Check 'undefined' and '' for more information.). You can now:
    Choose Retry to repeat the current step.
    Choose View Log to get more information about the error.
    Stop the option and continue with it later.
    Log files are written to /tmp/sapinst_instdir/NW72/INSTALL/NW72/ORA/STD/.*
    J2EE is running but I checked the cat /home/ce1adm/JdbcCon.log message as ,
    Start: Sun Sep 26 02:23:40 IST 2010
                        OK: connected to CE1 on jdbc/pool/CE1
                        OK: disconnected
                        Stop: Sun Sep 26 02:23:42 IST 2010*
                        sapnce:ce1adm 16>
                              Then I had checked the R3 trans and log file is
    4 ETW000                                                                                32  0.117400
    4 ETW000  [dbsloci.    ,00000]  *** ERROR => CONNECT failed with sql error '1017'                         26  0.117426
    4 ETW000  [dev trc     ,00000]     set_ocica() -> SQL error code 1017                                     21  0.117447
    4 ETW000  [dev trc     ,00000]  -->oci_get_errmsg (con=0, rc=1017)                                        21  0.117468
    4 ETW000  [dev trc     ,00000]     OCIErrorGet -> SQL error code: 1017                                    84  0.117552
    4 ETW000  [dev trc     ,00000]     ORA-01017: invalid username/password; logon denied
    4 ETW000                                                                                30  0.117582
    4 ETW000  [dev trc     ,00000]     DbSlConnect(con=-1) -> orc=0, 99=DBSL_ERR_DB                           23  0.117605
    4 ETW000  [dblink      ,00000]  ***LOG BY2=>sql error 1017   performing CON                               93  0.117698
    4 ETW000  [dblink      ,00000]  ***LOG BY0=>ORA-01017: invalid username/password; logon denied            24  0.117722
    2EETW169 no connect possible: "DBMS = ORACLE                           --- dbs_ora_tnsname = 'CE1'"
                        Please help me in this I strucked in this step for last 1 day.
    Regards,
    Sampath
    Edited by: Matt on Sep 28, 2010 8:54 AM - changed formatting for readability

    Sorry friends, this thread was already answered and closed by some one I have open a new Thread for my issue.
    Hi All,
    I am facing similar issue , My error also similar , Here is the summery of the error,  Please help I got stuck very badly here past 2 days....I have 250 GB free space in the directory were usr/sap  directory.
    An error occurred while processing option SAP NetWeaver 7.3 Developer Edition > Install > Custom Server Installation( Last error reported by the step: Execution of Deploy Controller Runner tool '"C:\Program Files\sapinst_instdir\NW73\INSTALL\DEVSYSTEM\sapjvm\sapjvm_6\bin\java.exe" -classpath "C:/Program Files/sapinst_instdir/NW73/INSTALL/DEVSYSTEM/install/lib;C:/usr/sap/ABC/SYS/global/security/lib/tools/iaik_jce.jar;C:/usr/sap/ABC/SYS/global/security/lib/tools/iaik_jsse.jar;C:/usr/sap/ABC/SYS/global/security/lib/tools/iaik_smime.jar;C:/usr/sap/ABC/SYS/global/security/lib/tools/iaik_ssl.jar;C:/usr/sap/ABC/SYS/global/security/lib/tools/w3c_http.jar;C:/usr/sap/ABC/J00/j2ee/j2eeclient/sap.com~tc~exception~impl.jar;C:/usr/sap/ABC/J00/j2ee/j2eeclient/sap.com~tc~je~clientlib~impl.jar;C:/usr/sap/ABC/J00/j2ee/j2eeclient/sap.com~tc~logging~java~impl.jar;C:/Program Files/sapinst_instdir/NW73/INSTALL/DEVSYSTEM/install/lib/tc~je~cl_deploy.jar" -Xmx256m -Ddc.api.verbose=false com.sap.engine.services.dc.
    Thanks
    Naveen

  • Problem with SAP NetWeaver 04 SP16 installation when running Phase 6

    Hi,
    When I was installing SAP NetWeaver 04 SP16(Full Java Edition),I got this error in phase 6:
    ERROR 2006-04-20 03:10:23
    MDB-07001  No action defined for actor.
    ERROR 2006-04-20 03:10:23
    CJS-00030  Assertion failed: in function sapdb_db_create(db_nm, db_host, db_ver) {    var
    dep_root = sapdb_inst_root(db_nm);    var sdb_i = new sdbInstance();    sdb_i.dbName =
    db_nm;    sdb_i.dbHost = db_host;    sdb_i.dbVer = db_ver[0] + "." + db_ver[1];   
    sdb_i.ctlUser = sapdb_get_db_user("CONTROL", db_nm, db_host);    sdb_i.ctlUserPasswd =
    sapdb_get_db_user_passwd("CONTROL", db_nm, db_host);    var actorObj = new SdbExtActor();  
    actorObj.setSdbInstance(sdb_i);    actorObj.setDbmCmd("DB_CREATE");   
    actorObj.setExecutable(sapdb_dbmcli_path());    actorObj.setDbRoot(dep_root);    var rv =
    actorObj.sessionExecute();    ASSERT(arguments.callee, rv == "OK", " SDB: ERROR CREATING
    DATABASE INSTANCE! Check the XCMDOUT.LOG FILE");    var creation_ok = false;    var i_size
    = actorObj.outSize();    for (var i = 0; i < i_size; i++) {        var s_line =
    actorObj.getOutputLine(i);        if (/OK/.test(s_line)) {            creation_ok = true;  
         }    }    ASSERT(arguments.callee, creation_ok, "SDB: ERROR WHILE DB INSTANCE
    CREATION! CHECK THE XCMDOUT.LOG FILE! ");} SDB: ERROR CREATING DATABASE INSTANCE! Check the XCMDOUT.LOG FILE
    my installing environment:
    OS: windows 2000 server
    RAM: 2G
    JAVA SDK version: 1.4.2_08
    Thanks advance.

    Hi
    Please see this thread of the SDN forum
    SP16 Preview: MaxDB Installation fails (Phase 6)
    Seems some issues with MAX DB ver 7.6
    regards
    rajeshkr

  • Problems with installation SAP Netweaver ABAP 7.0

    Hello, can someone give me an adice on installing SAP NetWeaver ABAP 7.0 trial version, please?
    After installing the application server and SAP management konsole and stopping the application server following message pops up. The same message pops up after installing SAP GUI and starting the application server again.
    Can this be caused by bad installation of MS Loopback Adapter on my Windows Vista?
    ===================================================
    ============== Stopping System NSP ================
    ===================================================
    ========= Stopping ABAP instance ====
    23.05.2009 15:28:06
    Stop
    OK
    23.05.2009 15:28:16
    StopWait
    OK
    ========= Stopping database instance ...
    The MaxDB Database Stopper, Version 7.7.04.23
    Copyright 2000-2008 by SAP AG
    Error! Connection failed to node (local) for database NSP:
    -24700,ERR_DBMSRV_NOSTART: Could not start DBM server.
    -24701,ERR_EXHNDLR: Could not initialize exception handler.
    -24748,ERR_FILEOPEN: Error opening file C:sapdbdatawrkdbmsrv_DATART-PC.err
    -24826,ERR_NIERROR: Can not open file 'C:sapdbdatawrkdbmsrv_DATART-PC.err'.
    (System error 5; Přístup byl odepřen.)
    Error: Error while calling dbmcli
    "C:sapdbprogramspgmdbmcli"  -d NSP -u , db_offline -nc
    ============== Stop database failed !
    Pokračujte stisknutím libovolné klávesy.
    Please see how I installed MS Loopback Adapter:
    Download the DevCon compressed file, and then extract the files:
    a. Visit the following Microsoft Web site for download: DevCon
    b. Save the Devcon.exe file to a folder on your computer, and then open the folder.
    c. Double-click Devcon.exe.
    d. In the Unzip to path box, type the folder where you want to unzip the files, and then click Unzip.
    e. Click OK, and then Close to complete the unzip process.
    2. Install the Microsoft Loopback Adapter:
    a. At a command prompt, change directory to the folder where you extracted the DevCon files.
    b. Change directory to the i386 folder.
    c. Type devcon.exe install %windir%inf
    etloop.inf *msloop, and then press ENTER. You see output that is similar to the following:
    Device node created. Install is complete when drivers are updated...
    Updating drivers for *msloop from C:WINDOWSinf
    etloop.inf.
    Drivers updated successfully.
    Can someone help?
    Thanks a lot.
    Milan

    Hi Milan,
    I´m sorry but i think i´m not able to help you so much. I´ve just installed SAP in my Laptop but with XP-Professinal. At first i had some troubles too and at the end i had to reinstall it to make it run properly so i think i cannot help you very much. Sorry.
    Despite this, take a look at the detailed instructions of how to set up MS Loopback Adapter when you execute the file start of the SAP installation. You can check if the MS Loopback adaptor is working or not. And do not forget to search messages in relation with errors (-24700,ERR_DBMSRV_NOSTART, etc...)
    Maybe it´s a silly question but it´s really stopped the database ? when you open the SAP Console the server and the database are in grey ?
    Joaquin Casas Baca-Castex

  • Error in Java deployment step of SAP Netweaver installation

    Hi Team,
    We are installing SAP Netweaver 7.4 SR2.
    We are using How to install SAP NetWeaver Application Server Java guide.
    We have completed all steps upto step 27 without much hiccups, but during Java deploy stage, we are getting errors related to port 50004.
    We have restarted the machine and continued the installation .but are still getting the error.
    We have checked the heap size -- Its value is 1024mb.
    Do not know what is wrong with this.
    We have assigned 4 GB Ram and Paging  is also set as per requirement. Previously we had used 3.5 GB RAM
    Attaching the log files:
    In deploy_api.0 log file we are getting lots of messages as:
    Mar 20, 2015 4:09:29 PM  Error:
    Mar 20, 2015 4:09:29 PM  Error: com.sap.ASJ.dpl_api.001260 Cannot connect[ ConnectionException ].Reason: [ERROR CODE DPL.DCAPI.1144] Could not establish connection to AS Java on [SMDDev:50004]. No alive connection. Check state of the server. Check if the host and port specified are correct and AS Java is up and running.
    Mar 20, 2015 4:09:29 PM  Info: com.sap.ASJ.dpl_api.001263 Destroy command:[deploy]
    Mar 20, 2015 4:31:55 PM  Info: com.sap.ASJ.dpl_api.001257 Log file is [C:\Program Files\sapinst_instdir\NW740SR2\MSS\INSTALL\STD\log\dc_log\deploy_api.0.log]
    Mar 20, 2015 4:31:55 PM  Info: com.sap.ASJ.dpl_api.001258 Trace file is [C:\Program Files\sapinst_instdir\NW740SR2\MSS\INSTALL\STD\log\dc_log\deploy_api.0.trc]
    Mar 20, 2015 4:31:55 PM  Info: com.sap.ASJ.dpl_api.001259 Init command:[deploy]
    Mar 20, 2015 4:32:07 PM  Error: com.sap.ASJ.dpl_api.001224 Could not establish connection to AS Java on [SMDDev:50004]. Cannot establish connection with any of the available profiles:
    url=SMDDev:50004 protocol=p4 (None); Reason: com.sap.engine.services.rmi_p4.P4IOException: Cannot open connection to host: 172.16.35.110 and port: 50004
    Check if server is started, access point for the protocol is available, and IP/Host name is accessible on network.. Check if the host and port specified are correct and AS Java is up and running.
    Mar 20, 2015 4:32:08 PM  Error:
    Mar 20, 2015 4:32:08 PM  Error: com.sap.ASJ.dpl_api.001260 Cannot connect[ ConnectionException ].Reason: [ERROR CODE DPL.DCAPI.1144] Could not establish connection to AS Java on [SMDDev:50004]. Cannot establish connection with any of the available profiles:
    url=SMDDev:50004 protocol=p4 (None); Reason: com.sap.engine.services.rmi_p4.P4IOException: Cannot open connection to host: 172.16.35.110 and port: 50004
    Check if server is started, access point for the protocol is available, and IP/Host name is accessible on network.. Check if the host and port specified are correct and AS Java is up and running.
    Mar 20, 2015 4:32:08 PM  Info: com.sap.ASJ.dpl_api.001263 Destroy command:[deploy]

    Hi Suraj,
    Hope you are doing good.
    Nice to hear from you again. It looks like P4 connection is affected:
    1)
    Review note 1158626 and adjust the P4 port configuration accordingly. You will need to check whether the P4 port is available. Note 1925352 will help you to check this (you can use the sapcontrol command or others mentioned to check whether host: 172.16.35.110 and port: 50004 is available or not).
    2)
    Make sure that there are no invalid profile files. Kindly move the profile files that are old to some other location.
    3)
    Also, please verify that you don't have any non-deterministic names in the etc/hosts file, per SAP note:
    1134222 - Cannot access AS Java via P4 connection
    Hope this helps.
    Kind Regards,
    Hemanth
    SAP AGS

  • Problem in Installation of SAP Netweaver CE 7.1 SP3

    Hi,
    I am trying to install SAP Netweaver CE 7.1 SP3 on Windows XP Professional. All the steps are executed sucessfully till Step 26 where it gives an error when it tries to
    "Creating SAP start service of instance CE1 SCS01"
    It says that the "Service didn't come up in 40 seconds" and if you retry the installation is terminated in 1 min with the error :
    Selfextractor error
    iaextract.c:888: child has signaled an exec error. Keeping directory C:/DOCUME1/I047488/LOCALS1/Temp/sapinst_exe.2620.1195815840
    In the SAP MMC only one server can be seen with the processes;
    msg_server.exe
    enserver.exe
    gwrd.exe
    All these processes are running in green.
    Please reply ASAP.
    The last part of the sapinstdev_log is :
    TRACE      2007-11-23 16:56:02.317
    NWInstance.getSAPLocExeDir() done: C:/usr/sap/CE1/SYS/exe/uc/NTI386
    TRACE      2007-11-23 16:56:02.317
    NWInstanceInstall.createServiceWindows(): going to run <C:\usr\sap\CE1
    \SYS\exe\uc\NTI386\sapstartsrv.exe -stdin> with input <-r -q -p C:\usr\sap\CE1\SYS\profile\CE1_SCS01_AGRD50051628A -s CE1 -n 01 -U "NT Authority\LocalService" -P "XXXXXX" -e SAP_ALL\I047488>
    TRACE      2007-11-23 16:56:02.317
    lognode: undefined, append: false
    INFO       2007-11-23 16:56:02.348 [synxcpath.cpp:815]
               CSyPath::createFile() lib=syslib module=syslib
    Creating file C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\sapstartsrv.exe.log.
    TRACE      2007-11-23 16:56:02.348 [synxcchapp.cpp:264]
               CSyChildApplicationImpl::doStart() lib=syslib module=syslib
    Going to call CreateProcess/CreateProcessAsUser for 'C:\usr\sap\CE1\SYS\exe\uc\NTI386\sapstartsrv.exe' now.
    TRACE      2007-11-23 16:56:02.348 [synxcchapp.cpp:560]
               CSyChildApplicationImpl::doStart() lib=syslib module=syslib
    Trying to start C:\usr\sap\CE1\SYS\exe\uc\NTI386\sapstartsrv.exe using CreateProcess(NULL, <command line for executable C:\usr\sap\CE1\SYS\exe\uc\NTI386\sapstartsrv.exe, NULL, NULL, TRUE, 0x420, NULL, NULL, &StartupInfo, &ProcessInfo)
    TRACE      2007-11-23 16:56:02.535 [synxcchapp.cpp:638]
               CSyChildApplicationImpl::doStart() lib=syslib module=syslib
    A child process has been started. Pid = 2480. Executable name: C:\usr\sap\CE1\SYS\exe\uc\NTI386\sapstartsrv.exe
    INFO       2007-11-23 16:56:02.535
               CJSlibModule::writeInfo_impl()
    Output of C:\usr\sap\CE1\SYS\exe\uc\NTI386\sapstartsrv.exe -stdin is written to the logfile sapstartsrv.exe.log.
    TRACE      2007-11-23 16:56:45.170 [synxcpipe.cpp:195]
               CSyStdOutErrPipe::onUnderflow(void * buf, int maxBytes, int timeout)
               lib=syslib module=syslib
    Syslib info about system call. OS message 109 (The pipe has been ended.
    ) after execution of system call 'ReadFile' with parameter ((read end of child process output pipe)), line (403) in file (synxcpipe.cpp).
    WARNING    2007-11-23 16:56:45.170
               CJSlibModule::writeWarning_impl()
    Execution of the command "C:\usr\sap\CE1\SYS\exe\uc\NTI386\sapstartsrv.exe -stdin" finished with return code -1. Output:
    Service not started within 40 seconds.
    TRACE      2007-11-23 16:56:45.170
    NWInstance.getSAPLocExeDir()
    TRACE      2007-11-23 16:56:45.170
    NWInstance.getProfiles()
    TRACE      2007-11-23 16:56:45.170
    NWInstance.getProfiles(): profiles object exists
    TRACE      2007-11-23 16:56:45.170
    NWInstance.getProfiles() done
    TRACE      2007-11-23 16:56:45.170
    NWProfiles(CE1.SCS01).getProfile()
    TRACE      2007-11-23 16:56:45.170
    NWProfiles(CE1.SCS01)._getProfile(INSTANCE)
    TRACE      2007-11-23 16:56:45.170
    NWProfiles(CE1.SCS01).getPersistentDefaultProfile()
    TRACE      2007-11-23 16:56:45.170
    NW.getPersistentDefaultProfile()
    TRACE      2007-11-23 16:56:45.186
    NW.isUnicode(true)
    TRACE      2007-11-23 16:56:45.186
    NW.isUnicode() done: true
    TRACE      2007-11-23 16:56:45.186
    NW.getPersistentDefaultProfile() done
    TRACE      2007-11-23 16:56:45.186
    NWProfiles(CE1.SCS01).getPersistentDefaultProfile() done
    TRACE      2007-11-23 16:56:45.201
    NWProfiles(CE1.SCS01)._getPersistentProfile(INSTANCE)
    TRACE      2007-11-23 16:56:45.217
    NWProfiles(CE1.SCS01).getPersistentDefaultProfile()
    TRACE      2007-11-23 16:56:45.217
    NW.getPersistentDefaultProfile()
    TRACE      2007-11-23 16:56:45.232
    NW.isUnicode(true)
    TRACE      2007-11-23 16:56:45.232
    NW.isUnicode() done: true
    TRACE      2007-11-23 16:56:45.232
    NW.getPersistentDefaultProfile() done
    TRACE      2007-11-23 16:56:45.232
    NWProfiles(CE1.SCS01).getPersistentDefaultProfile() done
    TRACE      2007-11-23 16:56:45.232
    NWProfiles(CE1.SCS01)._getPersistentProfile(INSTANCE) done
    TRACE      2007-11-23 16:56:45.264
    NWInstance.isAlwaysUnicode()
    TRACE      2007-11-23 16:56:45.264
    NWInstance.isAlwaysUnicode(SCS)
    TRACE      2007-11-23 16:56:45.264
    NWInstance.isAlwaysUnicode() done: true
    TRACE      2007-11-23 16:56:45.264
    NWInstance.isAlwaysUnicode() done: true
    TRACE      2007-11-23 16:56:45.264
    NWProfiles(CE1.SCS01)._getProfile(INSTANCE) done
    TRACE      2007-11-23 16:56:45.264
    NWProfiles(CE1.SCS01).getProfile() done
    TRACE      2007-11-23 16:56:45.326
    NWInstance.getSAPLocExeDir() done: C:/usr/sap/CE1/SYS/exe/uc/NTI386
    WARNING[E] 2007-11-23 16:56:45.326
               CJSlibModule::writeError_impl()
    MOS-01011  'C:/usr/sap/CE1/SYS/exe/uc/NTI386/sapstartsrv.exe' returned with '-1'.
    TRACE      2007-11-23 16:56:45.326 [iaxxejsbas.hpp:408]
               handleException<ESAPinstJSError>()
    Converting exception into JS Exception EJSException.
    TRACE      2007-11-23 16:56:45.326
    Function setMessageIdOfExceptionMessage: osmod.applicationReturn
    WARNING[E] 2007-11-23 16:56:45.326
               CJSlibModule::writeError_impl()
    MOS-01011  'C:/usr/sap/CE1/SYS/exe/uc/NTI386/sapstartsrv.exe' returned with '-1'.
    TRACE      2007-11-23 16:56:45.326 [iaxxejsbas.hpp:483]
               EJS_Base::dispatchFunctionCall()
    JS Callback has thrown unknown exception. Rethrowing.
    ERROR      2007-11-23 16:56:45.357 [sixxcstepexecute.cpp:891]
    FCO-00011  The step createService with step key |CE_DevSystem_App|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_Instance|ind|ind|ind|ind|1|0|createService was executed with status ERROR .
    TRACE      2007-11-23 16:56:45.373 [iaxxgenimp.cpp:761]
                CGuiEngineImp::showMessageBox
    <html> <head> </head> <body> <p> An error occurred while processing service SAP NetWeaver CE Developer Edition > SAP NetWeaver CE Development System. You may now </p> <ul> <li> choose <i>Retry</i> to repeat the current step. </li> <li> choose <i>View Log</i> to get more information about the error. </li> <li> stop the task and continue with it later. </li> </ul> <p> Log files are written to C:\Program Files/sapinst_instdir/CE71_DEV_ADA/INSTALL. </p> </body></html>
    TRACE      2007-11-23 16:56:45.373 [iaxxgenimp.cpp:1257]
               CGuiEngineImp::acceptAnswerForBlockingRequest
    waiting for an answer from gui

    Hi All,
    I faced the same problem on WinXP Pro SP2, SP3 and on Win2k3Server although all the installation requirements are fulfilled. I have the same problem with SP5  downloaded from SDN which was released recently.
    I could install successfully SP1(Trial Version) from a DVD that came with the book "Developer's Guide to SAP NetWeaver Composite Environment". This was packaged using "Install Anywhere".
    So, I think it is a problem with SAPInst. Could anyone help to solve this problem?
    Your suggestion is highly appreciated.
    Thanks & Regards - Tarini P Mohanty

  • Error is coming at the time of Installation of SAP Netweaver 04's sp7

    Hi All,
    An Error is coming at the time of Installation of SAP Netweaver 04's sp7
    Error: Unable to create an account for <SystemName> for <SAP Service sid>
    can anyone suggest me regarding this.
    Regards
    Phanikumar

    Hi
    Thanks for ur suggestion,
    I got the solution to this error.
    The main reason is at the time of Intsalling Netweaver on windows 2003 server with Administrator rights, as per the Installtion manual we have to follow the windows password policy must and should and give the same for the Master Password while installing, then we won't get error.
    Thanks & Regards
    phanikumar

Maybe you are looking for