SAP Netweaver slim Edition - Installation problem-local host!!!!!!!
Trying to run inst file, it gives me the following error message when I specify the localhost.
<b>ERROR 2006-02-12 09:23:48
<html>The name of this host is <em>E58AEB3F9A6342E</em> which is more than 13 characters long.<p>This is not supported for SAP server installations (see SAP Note 611361).</html></b>
Please share your experiences or knowledge on this issue.
thanks
Welcome to SDN.
Change your computer name to something less than 13 characters.
(mycomputer ->properties->computer name)
Regards
Raja
Similar Messages
-
SAP Netweaver 7.02 installation problem, "Start Instance" not possible??
Hello,
i need help with my "new" Problem during installation of SAP Netweaver, everything is ok until "Phase 21 of 24'" is reached,
here should the instance started, i receive this error:
"An error occurred while processing option SAP NetWeaver 7.0 including Enhancement Package 2 > SAP Application Server ABAP > MaxDB > Central System > Central System( Last error reported by the step :ABAP processes of instance NSP/DVEBMGS00 [ABAP: STARTING] did not start after 10:10 minutes. Giving up.)."
I can see in the SAPmmc that msg_server.exe ist started and is green, but disp+work.exe is yellow and have a status:
"Running but dialog queue stand still."
That all make me confuse, why is there a such big difference in 32 and 64bit installtion?
I have this problem only on windows 7 64bit. on 32bit windows i nave never problems with installation.
Can anyone help me here please?
If need more information i can put here some logfiles?
Thanks for any help
MirsoHere is the next file dew_w0:
trc file: "dev_w0", trc level: 1, release: "720"
* ACTIVE TRACE LEVEL 1
* ACTIVE TRACE COMPONENTS all, MJ
M sysno 00
M sid NSP
M systemid 562 (PC with Windows NT)
M relno 7200
M patchlevel 0
M patchno 46
M intno 20020600
M make multithreaded, Unicode, 64 bit, optimized
M profile \\BIG\sapmnt\NSP\SYS\profile\NSP_DVEBMGS00_BIG
M pid 6896
M
M
M Thu Aug 07 20:23:20 2014
M kernel runs with dp version 125000(ext=118000) (@(#) DPLIB-INT-VERSION-125000-UC)
M length of sys_adm_ext is 588 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workp. 0 6896) [dpxxdisp.c 1314]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is active
M DpIPCInit2: read dp-profile-values from sys_adm_ext
M DpShMCreate: sizeof(wp_adm) 31696 (2264)
M DpShMCreate: sizeof(tm_adm) 5517056 (27448)
M DpShMCreate: sizeof(wp_ca_adm) 64000 (64)
M DpShMCreate: sizeof(appc_ca_adm) 64000 (64)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/584064/584080
M DpShMCreate: sizeof(comm_adm) 584080 (1144)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=512/48/65600/90416/156064
M DpShMCreate: sizeof(slock_adm) 156064 (104)
M DpFileTableSize: max/headSize/ftSize/tableSize=2800/16/268864/268880
M DpShMCreate: sizeof(file_adm) 268880 (80)
M DpShMCreate: sizeof(vmc_adm) 30128 (2152)
M DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: sizeof(j2ee_adm) 3936
M DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000DD90050, size: 6812336)
M DpShMCreate: allocated sys_adm at 000000000DD90060
M DpShMCreate: allocated wp_adm_list at 000000000DD93030
M DpShMCreate: allocated wp_adm at 000000000DD93220
M DpShMCreate: allocated tm_adm_list at 000000000DD9AE00
M DpShMCreate: allocated tm_adm at 000000000DD9AE50
M DpShMCreate: allocated wp_ca_adm at 000000000E2DDD60
M DpShMCreate: allocated appc_ca_adm at 000000000E2ED770
M DpShMCreate: allocated comm_adm at 000000000E2FD180
M DpShMCreate: allocated slock_adm at 000000000E38BB20
M DpShMCreate: allocated file_adm at 000000000E3B1CD0
M DpShMCreate: allocated vmc_adm_list at 000000000E3F3730
M DpShMCreate: allocated vmc_adm at 000000000E3F37E0
M DpShMCreate: allocated gw_adm at 000000000E3FADA0
M DpShMCreate: allocated j2ee_adm at 000000000E3FADE0
M DpShMCreate: allocated ca_info at 000000000E3FBD50
M DpShMCreate: allocated wall_adm at 000000000E3FBD70
M DpCommAttachTable: attached comm table (header=000000000E2FD180/ft=000000000E2FD190)
M DpSesCreateTable: attached session table at 00000000029A0050 (len=161328)
M DpRqQInit: use protect_queue / slots_per_queue 0 / 2001 from sys_adm
M rdisp/queue_size_check_value : -> on,50,30,40,500,50,500,80
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M DpVmcSetActive: set vmc state DP_VMC_ENABLED
M DpVmcSetActive: set vmc state DP_VMC_ACTIVE
M DpVmcInit2: o.k.
M
M Thu Aug 07 20:23:21 2014
M ThStart: taskhandler started
M ThInit: initializing DIA work process W0
M
M Thu Aug 07 20:23:23 2014
M ThInit: running on host BIG
M
M Thu Aug 07 20:23:24 2014
M calling db_connect ...
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' ...
B Library 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' loaded
B Version of 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' is "720.00", patchlevel (0.45)
B New connection 0 created
C
C DBSDBSLIB : version 720.00, patch 0.045 (Make PL 0.46)
C MAXDB shared library (dbsdbslib) patchlevels (last 10)
C (0.045) Unknown primary key (note 1459400)
C (0.039) Define your own command buffersize (note 1340617)
C (0.031) Dbm commands support added (note 1420733)
C (0.027) Count of records for bulk insert optimized (note 1340617)
C (0.021) Connect with special xuser key (note 1390464)
C (0.018) Error handling for external update statistics changed (note 1340617)
C (0.018) Dbsl procedure to update datasource information (note 1340617)
C (0.015) Special describe handling on MaxDB systemtables (note 1382175)
C (0.013) Possibility to disable UPSERT statements (note 1340617)
C (0.013) Check for external update statistics changed (note 1340617)
C
C
C Loading SQLDBC client runtime ...
C
C Thu Aug 07 20:23:25 2014
C SQLDBC Module : C:\sapdb\clients\NSP\pgm\libSQLDBC77.dll
C SQLDBC SDK : SQLDBC.H 7.7.4 BUILD 009-123-173-450
C SQLDBC Runtime : libSQLDBC 7.8.1 BUILD 014-121-233-288
C SQLDBC client runtime is MaxDB 7.8.1.014 CL 233288
C SQLDBC supports new DECIMAL interface : 1
C SQLDBC supports VARIABLE INPUT data : 1
C SQLDBC supports VARIABLE OUTPUT data : 1
C SQLDBC supports Multiple Streams : 1
C SQLDBC supports LOB LOCATOR KEEPALIVE : 1
C SQLDBC supports LOB LOCATOR COPY : 1
C SQLDBC supports BULK SELECT with LOBS : 1
C INFO : SQLOPT= -I 0 -t 0 -S SAPR3
C Try to connect (DEFAULT) on connection 0 ...
C Attach to SAP DB : Kernel 7.8.01 Build 014-121-233-288
C Database release is SAP DB 7.8.01.014
C INFO : Database 'NSP' instance is running on 'minisap'
C DB supports UPSERT SQL syntax : 1
C DB supports new EXPAND syntax : 1
C DB supports LOB locators : 1
C DB uses MVCC support : 0
C DB max. input host variables : 2000
C INFO : SAP DB Packet_Size = 131072
C INFO : SAP DB Min_Reply_Size = 4096
C INFO : SAP DB Comm_Size = 126976
C INFO : DBSL buffer size = 126976
C INFO : SAP DB MaxLocks = 300000
C INFO : Connect to DB as 'SAPNSP'
C Command info enabled
C Now I'm connected to MaxDB
C 00: minisap-NSP, since=20140807202325, ABAP= <unknown> (0)
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX BC HC PRM RCT FRC TIM MAX OPT Date Time DBHost Program
B 000 000 R/3 000000000 ACTIVE NO NO NO YES NO NO 000 255 255 20140807 202324 minisap
C INFO : SAP RELEASE (DB) = 702
M ThInit: db_connect o.k.
M ICT: exclude compression: *.zip,*.rar,*.arj,*.z,*.gz,*.tar,*.lzh,*.cab,*.hqx,*.ace,*.jar,*.ear,*.war,*.css,*.pdf,*.gzip,*.uue,*.bz2,*.iso,*.sda,*.sar,*.gif,*.png,*.swc,*.swf
M vmcj/sgc_options: switch on template cleanup before cloning
M vmcj/sgc_options: switch off delayed session cleanup during shared gc
M ThVmcInitWaitForVm: th_maxWaitForVmTime=30
M ThVmcInitMaxErrCount: th_max_error_count=5
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 0000000014830050, size: 4400000)
M SHM_ROLL_AREA (addr: 000007FEC3B40050, size: 268435456)
M SHM_PAGING_AREA (addr: 0000000014C70050, size: 134217728)
M SHM_ROLL_ADM (addr: 000000001CC80050, size: 2767448)
M SHM_PAGING_ADM (addr: 0000000002E30050, size: 525344)
M ThCreateNoBuffer allocated 548152 bytes for 1000 entries at 0000000002F70050
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 30976 bytes (50 server) at 0000000002B00050
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X ES initialized.
B db_con_shm_ini: WP_ID = 0, WP_CNT = 14, CON_ID = -1
B dbtbxbuf: Buffer TABL (addr: 00000000208D0160, size: 30000000, end: 000000002256C4E0)
B dbtbxbuf: Buffer TABLP (addr: 0000000022570160, size: 10240000, end: 0000000022F34160)
B dbexpbuf: Buffer EIBUF (addr: 0000000022F40170, size: 4194304, end: 0000000023340170)
B dbexpbuf: Buffer ESM (addr: 0000000023350170, size: 4194304, end: 0000000023750170)
B dbexpbuf: Buffer CUA (addr: 0000000023760170, size: 3072000, end: 0000000023A4E170)
B dbexpbuf: Buffer OTR (addr: 0000000023A50170, size: 4194304, end: 0000000023E50170)
I MPI: dynamic quotas disabled.
I MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
M CCMS uses Shared Memory Key 73 for monitoring.
M CCMS: SemInMgt: Semaphore Management initialized by AlAttachShm_Doublestack.
M CCMS: SemInit: Semaphore 38 initialized by AlAttachShm_Doublestack.
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
S *** init spool environment
S TSPEVJOB updates outside critical section: event_update_nocsec = 1
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 00000000133FFCE0
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 000000002D1500D0
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 000000002D150530
S using messages for server info
S size of spec char cache entry: 297032 bytes (timeout 100 sec)
S size of open spool request entry: 2512 bytes
S immediate print option for implicitely closed spool requests is disabled
A ***GENER* Trace switched on ***
A
A ---PXA-------------------------------------------
A PXA INITIALIZATION
A System page size: 4kb, total admin_size: 22076kb, dir_size: 21360kb.
A Attached to PXA (address 000007FED3B70050, size 300000K, 1 fragments of 277924K )
A PXA allocated (address 000007FED3B70050, size 300000K)
A *** WARNING: INTERNAL_KERNEL_VERSION of message server
A unknown yet.
A abap/pxa = shared protect gen_remote
A PXA: checking structure sizes: 752|264|16
A PXA INITIALIZATION FINISHED
A ---PXA-------------------------------------------
A
A ABAP ShmAdm attached (addr=000007FFDF0EE000 leng=20955136 end=000007FFE04EA000)
A >> Shm MMADM area (addr=000007FFDF5E2970 leng=242368 end=000007FFDF61DC30)
A >> Shm MMDAT area (addr=000007FFDF61E000 leng=15511552 end=000007FFE04E9000)
A RFC Destination> destination BIG_NSP_00 host BIG system NSP systnr 0 (BIG_NSP_00)
A RFC Options> H=BIG,S=00,d=2,
A RFC FRFC> fallback activ but this is not a central instance.
A
A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 2
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
B dbtran INFO (init_connection '<DEFAULT>' [ADABAS D:720.00]):
B max_blocking_factor = 10, max_in_blocking_factor = 127,
B min_blocking_factor = 10, min_in_blocking_factor = 127,
B prefer_union_all = 1, prefer_join = 0,
B prefer_fix_blocking = 0, prefer_in_itab_opt = 1,
B convert AVG = 0, alias table FUPD = 0,
B escape_as_literal = 0,
B select * =0x0f, character encoding = STD / <none>:-,
B use_hints = abap->1, dbif->0x1, upto->4294967295
M ThrCreateShObjects allocated 29124 bytes at 0000000002B20050
N SsfSapSecin: putenv(SECUDIR=C:\usr\sap\NSP\DVEBMGS00\sec): ok
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF library is C:\usr\sap\NSP\DVEBMGS00\exe\sapsecu.dll .
N ===...SSF default hash algorithm is SHA1 .
N ===...SSF default symmetric encryption algorithm is DES-CBC .
N ===...SECUDIR="C:\usr\sap\NSP\DVEBMGS00\sec"
N ===...loading of Security Toolkit successfully completed.
N === SAPSECULIB Version 5.4.28M-6
N =================================================
N
N Thu Aug 07 20:23:26 2014
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
M JrfcVmcRegister in process-driver OK
M JrfcVmcRegisterNativesDriver o.k.
W =================================================
W === ipl_Init() called
W ITS Plugin: Path dw_gui
W ITS Plugin: Description ITS Plugin - ITS rendering DLL
W ITS Plugin: sizeof(SAP_UC) 2
W ITS Plugin: Release: 720, [7200.0.46.20020600]
W ITS Plugin: Int.version, [33]
W ITS Plugin: Feature set: [23]
W ===... Calling itsp_Init in external dll ===>
W === ipl_Init() returns 0, ITSPE_OK: OK
W =================================================
N SignInit: successfully obtained handle for Security Context cache
N VSI: WP init in ABAP VM completed with rc=0
E Enqueue Info: rdisp/wp_no_enq=1, rdisp/enqname=<empty>, assume BIG_NSP_00
E Enqueue Info: enque/use_pfclock2 = FALSE
E Enqueue Info: row condense enabled
E Enqueue Info: enque/use_pfclock2 = FALSE
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
M
M Thu Aug 07 20:23:27 2014
M ***LOG Q0I=> NiPConnect2: 127.0.0.1:65000: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3271]
M *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 1/sock 1340
(SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:65000) [nixxi.cpp 3271]
M *** ERROR => IcmConnect: NiConnect to localhost:65000,-1 (rc=-10) [icxxext.c 182]
M *** ERROR => ThPlgConnectToIcm: IcmConnect failed (-10) [thxxplg.c 5120]
M in_ThErrHandle: 1
M *** ERROR => ThStart: connect to icman (step 1, th_errno 2, action 3, level 1) [thxxhead.c 11087]
M
M Info for wp 0
M
M pid = 6896
M severity = 0
M status = 0
M stat = WP_NEW
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M req.req_info =
M req.tid = -1
M req.uid = 4294967295
M req.mode = 255
M req.len = -1
M req.rq_id = 65535
M req.rq_source =
M req.vm = no VM
M last_tid = 0
M last_uid = 0
M last_mode = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M mode_cleaned_counter = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M attachedVm = no VM
M
M ThIErrHandle: current request:
M
M -IN-- sender_id ? tid -1 wp_ca_blk -1 wp_id -1
M -IN-- action - uid -1 appc_ca_blk -1 type -
M -IN-- new_stat NO_CHANGE mode 255 len -1 rq_id -1
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >TrThHookFunc< for event BEFORE_DUMP
M TrThHookFunc: called for WP dump
M ThCallHooks: hook >TrThHookFunc< o.k.
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M ThrSaveSPAFields: save spa fields
M ThrSaveSPAFields: not an update task, no update info saved
M ThrSaveSPAFields: not a batch task, field zttabtckey not saved
M ThCallHooks: hook >ThrSaveSPAFields< o.k.
M ThCallHooks: call hook >ThrBtcCallLgCl< for event BEFORE_DUMP
M ThCallHooks: hook >ThrBtcCallLgCl< o.k.
M ThIErrHandle: entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workp. 0 6896) [dpnttool.c 339]
trc file: "dev_w0", trc level: 1, release: "720"
* ACTIVE TRACE LEVEL 1
* ACTIVE TRACE COMPONENTS all, MJ
M sysno 00
M sid NSP
M systemid 562 (PC with Windows NT)
M relno 7200
M patchlevel 0
M patchno 46
M intno 20020600
M make multithreaded, Unicode, 64 bit, optimized
M profile \\BIG\sapmnt\NSP\SYS\profile\NSP_DVEBMGS00_BIG
M pid 7620
M
M
M Thu Aug 07 20:28:43 2014
M kernel runs with dp version 125000(ext=118000) (@(#) DPLIB-INT-VERSION-125000-UC)
M length of sys_adm_ext is 588 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workp. 0 7620) [dpxxdisp.c 1314]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is active
M DpIPCInit2: read dp-profile-values from sys_adm_ext
M DpShMCreate: sizeof(wp_adm) 31696 (2264)
M DpShMCreate: sizeof(tm_adm) 5517056 (27448)
M DpShMCreate: sizeof(wp_ca_adm) 64000 (64)
M DpShMCreate: sizeof(appc_ca_adm) 64000 (64)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/584064/584080
M DpShMCreate: sizeof(comm_adm) 584080 (1144)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=512/48/65600/90416/156064
M DpShMCreate: sizeof(slock_adm) 156064 (104)
M DpFileTableSize: max/headSize/ftSize/tableSize=2800/16/268864/268880
M DpShMCreate: sizeof(file_adm) 268880 (80)
M DpShMCreate: sizeof(vmc_adm) 30128 (2152)
M DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: sizeof(j2ee_adm) 3936
M DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000DE60050, size: 6812336)
M DpShMCreate: allocated sys_adm at 000000000DE60060
M DpShMCreate: allocated wp_adm_list at 000000000DE63030
M DpShMCreate: allocated wp_adm at 000000000DE63220
M DpShMCreate: allocated tm_adm_list at 000000000DE6AE00
M DpShMCreate: allocated tm_adm at 000000000DE6AE50
M DpShMCreate: allocated wp_ca_adm at 000000000E3ADD60
M DpShMCreate: allocated appc_ca_adm at 000000000E3BD770
M DpShMCreate: allocated comm_adm at 000000000E3CD180
M DpShMCreate: allocated slock_adm at 000000000E45BB20
M DpShMCreate: allocated file_adm at 000000000E481CD0
M DpShMCreate: allocated vmc_adm_list at 000000000E4C3730
M DpShMCreate: allocated vmc_adm at 000000000E4C37E0
M DpShMCreate: allocated gw_adm at 000000000E4CADA0
M DpShMCreate: allocated j2ee_adm at 000000000E4CADE0
M DpShMCreate: allocated ca_info at 000000000E4CBD50
M DpShMCreate: allocated wall_adm at 000000000E4CBD70
M DpCommAttachTable: attached comm table (header=000000000E3CD180/ft=000000000E3CD190)
M DpSesCreateTable: attached session table at 0000000002C50050 (len=161328)
M DpRqQInit: use protect_queue / slots_per_queue 0 / 2001 from sys_adm
M rdisp/queue_size_check_value : -> on,50,30,40,500,50,500,80
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M DpVmcSetActive: set vmc state DP_VMC_ENABLED
M DpVmcSetActive: set vmc state DP_VMC_ACTIVE
M DpVmcInit2: o.k.
M ThStart: taskhandler started
M ThInit: initializing DIA work process W0
M
M Thu Aug 07 20:28:45 2014
M ThInit: running on host BIG
M calling db_connect ...
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' ...
B Library 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' loaded
B Version of 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' is "720.00", patchlevel (0.45)
B New connection 0 created
C
C DBSDBSLIB : version 720.00, patch 0.045 (Make PL 0.46)
C MAXDB shared library (dbsdbslib) patchlevels (last 10)
C (0.045) Unknown primary key (note 1459400)
C (0.039) Define your own command buffersize (note 1340617)
C (0.031) Dbm commands support added (note 1420733)
C (0.027) Count of records for bulk insert optimized (note 1340617)
C (0.021) Connect with special xuser key (note 1390464)
C (0.018) Error handling for external update statistics changed (note 1340617)
C (0.018) Dbsl procedure to update datasource information (note 1340617)
C (0.015) Special describe handling on MaxDB systemtables (note 1382175)
C (0.013) Possibility to disable UPSERT statements (note 1340617)
C (0.013) Check for external update statistics changed (note 1340617)
C
C
C Loading SQLDBC client runtime ...
C SQLDBC Module : C:\sapdb\clients\NSP\pgm\libSQLDBC77.dll
C SQLDBC SDK : SQLDBC.H 7.7.4 BUILD 009-123-173-450
C SQLDBC Runtime : libSQLDBC 7.8.1 BUILD 014-121-233-288
C SQLDBC client runtime is MaxDB 7.8.1.014 CL 233288
C SQLDBC supports new DECIMAL interface : 1
C SQLDBC supports VARIABLE INPUT data : 1
C SQLDBC supports VARIABLE OUTPUT data : 1
C SQLDBC supports Multiple Streams : 1
C SQLDBC supports LOB LOCATOR KEEPALIVE : 1
C SQLDBC supports LOB LOCATOR COPY : 1
C SQLDBC supports BULK SELECT with LOBS : 1
C INFO : SQLOPT= -I 0 -t 0 -S SAPR3
C Try to connect (DEFAULT) on connection 0 ...
C Attach to SAP DB : Kernel 7.8.01 Build 014-121-233-288
C Database release is SAP DB 7.8.01.014
C INFO : Database 'NSP' instance is running on 'minisap'
C
C Thu Aug 07 20:28:46 2014
C DB supports UPSERT SQL syntax : 1
C DB supports new EXPAND syntax : 1
C DB supports LOB locators : 1
C DB uses MVCC support : 0
C DB max. input host variables : 2000
C INFO : SAP DB Packet_Size = 131072
C INFO : SAP DB Min_Reply_Size = 4096
C INFO : SAP DB Comm_Size = 126976
C INFO : DBSL buffer size = 126976
C INFO : SAP DB MaxLocks = 300000
C INFO : Connect to DB as 'SAPNSP'
C Command info enabled
C Now I'm connected to MaxDB
C 00: minisap-NSP, since=20140807202845, ABAP= <unknown> (0)
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX BC HC PRM RCT FRC TIM MAX OPT Date Time DBHost Program
B 000 000 R/3 000000000 ACTIVE NO NO NO YES NO NO 000 255 255 20140807 202845 minisap
C INFO : SAP RELEASE (DB) = 702
M ThInit: db_connect o.k.
M ICT: exclude compression: *.zip,*.rar,*.arj,*.z,*.gz,*.tar,*.lzh,*.cab,*.hqx,*.ace,*.jar,*.ear,*.war,*.css,*.pdf,*.gzip,*.uue,*.bz2,*.iso,*.sda,*.sar,*.gif,*.png,*.swc,*.swf
M vmcj/sgc_options: switch on template cleanup before cloning
M vmcj/sgc_options: switch off delayed session cleanup during shared gc
M ThVmcInitWaitForVm: th_maxWaitForVmTime=30
M ThVmcInitMaxErrCount: th_max_error_count=5
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 0000000014780050, size: 4400000)
M SHM_ROLL_AREA (addr: 000007FEC3B40050, size: 268435456)
M SHM_PAGING_AREA (addr: 0000000014BC0050, size: 134217728)
M SHM_ROLL_ADM (addr: 000000001CBD0050, size: 2767448)
M SHM_PAGING_ADM (addr: 00000000124B0050, size: 525344)
M ThCreateNoBuffer allocated 548152 bytes for 1000 entries at 0000000012540050
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 30976 bytes (50 server) at 0000000002EF0050
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X ES initialized.
B db_con_shm_ini: WP_ID = 0, WP_CNT = 14, CON_ID = -1
B dbtbxbuf: Buffer TABL (addr: 00000000208B0160, size: 30000000, end: 000000002254C4E0)
B dbtbxbuf: Buffer TABLP (addr: 0000000022550160, size: 10240000, end: 0000000022F14160)
B dbexpbuf: Buffer EIBUF (addr: 0000000022F20170, size: 4194304, end: 0000000023320170)
B dbexpbuf: Buffer ESM (addr: 0000000023330170, size: 4194304, end: 0000000023730170)
B dbexpbuf: Buffer CUA (addr: 0000000023740170, size: 3072000, end: 0000000023A2E170)
B dbexpbuf: Buffer OTR (addr: 0000000023A30170, size: 4194304, end: 0000000023E30170)
I MPI: dynamic quotas disabled.
I MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
M CCMS uses Shared Memory Key 73 for monitoring.
M CCMS: SemInMgt: Semaphore Management initialized by AlAttachShm_Doublestack.
M CCMS: SemInit: Semaphore 38 initialized by AlAttachShm_Doublestack.
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
S *** init spool environment
S TSPEVJOB updates outside critical section: event_update_nocsec = 1
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 000000001334FCE0
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 000000002D1B00D0
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 000000002D1B0530
S using messages for server info
S size of spec char cache entry: 297032 bytes (timeout 100 sec)
S size of open spool request entry: 2512 bytes
S immediate print option for implicitely closed spool requests is disabled
A ***GENER* Trace switched on ***
A
A ---PXA-------------------------------------------
A PXA INITIALIZATION
A System page size: 4kb, total admin_size: 22076kb, dir_size: 21360kb.
A Attached to PXA (address 000007FED3B70050, size 300000K, 1 fragments of 277924K )
A PXA allocated (address 000007FED3B70050, size 300000K)
A *** WARNING: INTERNAL_KERNEL_VERSION of message server
A unknown yet.
A abap/pxa = shared protect gen_remote
A PXA: checking structure sizes: 752|264|16
A PXA INITIALIZATION FINISHED
A ---PXA-------------------------------------------
A
A ABAP ShmAdm attached (addr=000007FFDF0EE000 leng=20955136 end=000007FFE04EA000)
A >> Shm MMADM area (addr=000007FFDF5E2970 leng=242368 end=000007FFDF61DC30)
A >> Shm MMDAT area (addr=000007FFDF61E000 leng=15511552 end=000007FFE04E9000)
A RFC Destination> destination BIG_NSP_00 host BIG system NSP systnr 0 (BIG_NSP_00)
A RFC Options> H=BIG,S=00,d=2,
A RFC FRFC> fallback activ but this is not a central instance.
A
A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 2
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
B dbtran INFO (init_connection '<DEFAULT>' [ADABAS D:720.00]):
B max_blocking_factor = 10, max_in_blocking_factor = 127,
B min_blocking_factor = 10, min_in_blocking_factor = 127,
B prefer_union_all = 1, prefer_join = 0,
B prefer_fix_blocking = 0, prefer_in_itab_opt = 1,
B convert AVG = 0, alias table FUPD = 0,
B escape_as_literal = 0,
B select * =0x0f, character encoding = STD / <none>:-,
B use_hints = abap->1, dbif->0x1, upto->4294967295
M ThrCreateShObjects allocated 29124 bytes at 0000000002F20050
N SsfSapSecin: putenv(SECUDIR=C:\usr\sap\NSP\DVEBMGS00\sec): ok
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF library is C:\usr\sap\NSP\DVEBMGS00\exe\sapsecu.dll .
N ===...SSF default hash algorithm is SHA1 .
N ===...SSF default symmetric encryption algorithm is DES-CBC .
N ===...SECUDIR="C:\usr\sap\NSP\DVEBMGS00\sec"
N ===...loading of Security Toolkit successfully completed.
N === SAPSECULIB Version 5.4.28M-6
N =================================================
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
M JrfcVmcRegister in process-driver OK
M JrfcVmcRegisterNativesDriver o.k.
W =================================================
W === ipl_Init() called
W ITS Plugin: Path dw_gui
W ITS Plugin: Description ITS Plugin - ITS rendering DLL
W ITS Plugin: sizeof(SAP_UC) 2
W ITS Plugin: Release: 720, [7200.0.46.20020600]
W ITS Plugin: Int.version, [33]
W ITS Plugin: Feature set: [23]
W ===... Calling itsp_Init in external dll ===>
W PpioRecoverLocks, table: 000007FFE04EDB30
W PpioRecoverLocks, number of file locks 256
W PpioRecoverLocks: file lock set to: 0000000000000000
W PpioRecoverLocks: directory lock set to: 0000000000000000
W PpioRecoverLocks: global lock set to: 0000000000000000
W PpioRecoverLocks() done
W PprcRecoverLocks, table: 000007FFE04EE020
W PprcRecoverLocks: directory lock set to: 0000000000000000
W PprcRecoverLocks() done
W === ipl_Init() returns 0, ITSPE_OK: OK
W =================================================
N SignInit: successfully obtained handle for Security Context cache
N VSI: WP init in ABAP VM completed with rc=0
E Enqueue Info: rdisp/wp_no_enq=1, rdisp/enqname=<empty>, assume BIG_NSP_00
E Enqueue Info: enque/use_pfclock2 = FALSE
E Enqueue Info: row condense enabled
E Enqueue Info: enque/use_pfclock2 = FALSE
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
M
M Thu Aug 07 20:28:47 2014
M ***LOG Q0I=> NiPConnect2: 127.0.0.1:65000: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3271]
M *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 1/sock 1340
(SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:65000) [nixxi.cpp 3271]
M *** ERROR => IcmConnect: NiConnect to localhost:65000,-1 (rc=-10) [icxxext.c 182]
M *** ERROR => ThPlgConnectToIcm: IcmConnect failed (-10) [thxxplg.c 5120]
M in_ThErrHandle: 1
M *** ERROR => ThStart: connect to icman (step 1, th_errno 2, action 3, level 1) [thxxhead.c 11087]
M
M Info for wp 0
M
M pid = 7620
M severity = 0
M status = 0
M stat = WP_NEW
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M req.req_info =
M req.tid = -1
M req.uid = 4294967295
M req.mode = 255
M req.len = -1
M req.rq_id = 65535
M req.rq_source =
M req.vm = no VM
M last_tid = 0
M last_uid = 0
M last_mode = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M mode_cleaned_counter = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M attachedVm = no VM
M
M ThIErrHandle: current request:
M
M -IN-- sender_id ? tid -1 wp_ca_blk -1 wp_id -1
M -IN-- action - uid -1 appc_ca_blk -1 type -
M -IN-- new_stat NO_CHANGE mode 255 len -1 rq_id -1
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >TrThHookFunc< for event BEFORE_DUMP
M TrThHookFunc: called for WP dump
M ThCallHooks: hook >TrThHookFunc< o.k.
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M ThrSaveSPAFields: save spa fields
M ThrSaveSPAFields: not an update task, no update info saved
M ThrSaveSPAFields: not a batch task, field zttabtckey not saved
M ThCallHooks: hook >ThrSaveSPAFields< o.k.
M ThCallHooks: call hook >ThrBtcCallLgCl< for event BEFORE_DUMP
M ThCallHooks: hook >ThrBtcCallLgCl< o.k.
M ThIErrHandle: entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workp. 0 7620) [dpnttool.c 339]
trc file: "dev_w0", trc level: 1, release: "720"
* ACTIVE TRACE LEVEL 1
* ACTIVE TRACE COMPONENTS all, MJ
M sysno 00
M sid NSP
M systemid 562 (PC with Windows NT)
M relno 7200
M patchlevel 0
M patchno 46
M intno 20020600
M make multithreaded, Unicode, 64 bit, optimized
M profile \\BIG\sapmnt\NSP\SYS\profile\NSP_DVEBMGS00_BIG
M pid 7828
M
M
M Thu Aug 07 20:33:43 2014
M kernel runs with dp version 125000(ext=118000) (@(#) DPLIB-INT-VERSION-125000-UC)
M length of sys_adm_ext is 588 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workp. 0 7828) [dpxxdisp.c 1314]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is active
M DpIPCInit2: read dp-profile-values from sys_adm_ext
M DpShMCreate: sizeof(wp_adm) 31696 (2264)
M DpShMCreate: sizeof(tm_adm) 5517056 (27448)
M DpShMCreate: sizeof(wp_ca_adm) 64000 (64)
M DpShMCreate: sizeof(appc_ca_adm) 64000 (64)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/584064/584080
M DpShMCreate: sizeof(comm_adm) 584080 (1144)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=512/48/65600/90416/156064
M DpShMCreate: sizeof(slock_adm) 156064 (104)
M DpFileTableSize: max/headSize/ftSize/tableSize=2800/16/268864/268880
M DpShMCreate: sizeof(file_adm) 268880 (80)
M DpShMCreate: sizeof(vmc_adm) 30128 (2152)
M DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: sizeof(j2ee_adm) 3936
M DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000DD90050, size: 6812336)
M DpShMCreate: allocated sys_adm at 000000000DD90060
M DpShMCreate: allocated wp_adm_list at 000000000DD93030
M DpShMCreate: allocated wp_adm at 000000000DD93220
M DpShMCreate: allocated tm_adm_list at 000000000DD9AE00
M DpShMCreate: allocated tm_adm at 000000000DD9AE50
M DpShMCreate: allocated wp_ca_adm at 000000000E2DDD60
M DpShMCreate: allocated appc_ca_adm at 000000000E2ED770
M DpShMCreate: allocated comm_adm at 000000000E2FD180
M DpShMCreate: allocated slock_adm at 000000000E38BB20
M DpShMCreate: allocated file_adm at 000000000E3B1CD0
M DpShMCreate: allocated vmc_adm_list at 000000000E3F3730
M DpShMCreate: allocated vmc_adm at 000000000E3F37E0
M DpShMCreate: allocated gw_adm at 000000000E3FADA0
M DpShMCreate: allocated j2ee_adm at 000000000E3FADE0
M DpShMCreate: allocated ca_info at 000000000E3FBD50
M DpShMCreate: allocated wall_adm at 000000000E3FBD70
M DpCommAttachTable: attached comm table (header=000000000E2FD180/ft=000000000E2FD190)
M DpSesCreateTable: attached session table at 0000000002990050 (len=161328)
M DpRqQInit: use protect_queue / slots_per_queue 0 / 2001 from sys_adm
M rdisp/queue_size_check_value : -> on,50,30,40,500,50,500,80
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M DpVmcSetActive: set vmc state DP_VMC_ENABLED
M DpVmcSetActive: set vmc state DP_VMC_ACTIVE
M DpVmcInit2: o.k.
M ThStart: taskhandler started
M ThInit: initializing DIA work process W0
M
M Thu Aug 07 20:33:44 2014
M ThInit: running on host BIG
M
M Thu Aug 07 20:33:45 2014
M calling db_connect ...
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' ...
B Library 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' loaded
B Version of 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' is "720.00", patchlevel (0.45)
B New connection 0 created
C
C DBSDBSLIB : version 720.00, patch 0.045 (Make PL 0.46)
C MAXDB shared library (dbsdbslib) patchlevels (last 10)
C (0.045) Unknown primary key (note 1459400)
C (0.039) Define your own command buffersize (note 1340617)
C (0.031) Dbm commands support added (note 1420733)
C (0.027) Count of records for bulk insert optimized (note 1340617)
C (0.021) Connect with special xuser key (note 1390464)
C (0.018) Error handling for external update statistics changed (note 1340617)
C (0.018) Dbsl procedure to update datasource information (note 1340617)
C (0.015) Special describe handling on MaxDB systemtables (note 1382175)
C (0.013) Possibility to disable UPSERT statements (note 1340617)
C (0.013) Check for external update statistics changed (note 1340617)
C
C
C Loading SQLDBC client runtime ...
C SQLDBC Module : C:\sapdb\clients\NSP\pgm\libSQLDBC77.dll
C SQLDBC SDK : SQLDBC.H 7.7.4 BUILD 009-123-173-450
C SQLDBC Runtime : libSQLDBC 7.8.1 BUILD 014-121-233-288
C SQLDBC client runtime is MaxDB 7.8.1.014 CL 233288
C SQLDBC supports new DECIMAL interface : 1
C SQLDBC supports VARIABLE INPUT data : 1
C SQLDBC supports VARIABLE OUTPUT data : 1
C SQLDBC supports Multiple Streams : 1
C SQLDBC supports LOB LOCATOR KEEPALIVE : 1
C SQLDBC supports LOB LOCATOR COPY : 1
C SQLDBC supports BULK SELECT with LOBS : 1
C INFO : SQLOPT= -I 0 -t 0 -S SAPR3
C Try to connect (DEFAULT) on connection 0 ...
C Attach to SAP DB : Kernel 7.8.01 Build 014-121-233-288
C Database release is SAP DB 7.8.01.014
C INFO : Database 'NSP' instance is running on 'minisap'
C DB supports UPSERT SQL syntax : 1
C DB supports new EXPAND syntax : 1
C DB supports LOB locators : 1
C DB uses MVCC support : 0
C DB max. input host variables : 2000
C INFO : SAP DB Packet_Size = 131072
C INFO : SAP DB Min_Reply_Size = 4096
C INFO : SAP DB Comm_Size = 126976
C INFO : DBSL buffer size = 126976
C INFO : SAP DB MaxLocks = 300000
C INFO : Connect to DB as 'SAPNSP'
C Command info enabled
C Now I'm connected to MaxDB
C 00: minisap-NSP, since=20140807203345, ABAP= <unknown> (0)
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX BC HC PRM RCT FRC TIM MAX OPT Date Time DBHost Program
B 000 000 R/3 000000000 ACTIVE NO NO NO YES NO NO 000 255 255 20140807 203345 minisap
C INFO : SAP RELEASE (DB) = 702
M ThInit: db_connect o.k.
M ICT: exclude compression: *.zip,*.rar,*.arj,*.z,*.gz,*.tar,*.lzh,*.cab,*.hqx,*.ace,*.jar,*.ear,*.war,*.css,*.pdf,*.gzip,*.uue,*.bz2,*.iso,*.sda,*.sar,*.gif,*.png,*.swc,*.swf
M vmcj/sgc_options: switch on template cleanup before cloning
M vmcj/sgc_options: switch off delayed session cleanup during shared gc
M ThVmcInitWaitForVm: th_maxWaitForVmTime=30
M ThVmcInitMaxErrCount: th_max_error_count=5
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 0000000014760050, size: 4400000)
M SHM_ROLL_AREA (addr: 000007FEC3B40050, size: 268435456)
M SHM_PAGING_AREA (addr: 0000000014BA0050, size: 134217728)
M SHM_ROLL_ADM (addr: 000000001CBB0050, size: 2767448)
M SHM_PAGING_ADM (addr: 0000000005930050, size: 525344)
M ThCreateNoBuffer allocated 548152 bytes for 1000 entries at 0000000005A60050
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 30976 bytes (50 server) at 0000000002BC0050
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X ES initialized.
B db_con_shm_ini: WP_ID = 0, WP_CNT = 14, CON_ID = -1
B dbtbxbuf: Buffer TABL (addr: 0000000020890160, size: 30000000, end: 000000002252C4E0)
B dbtbxbuf: Buffer TABLP (addr: 0000000022530160, size: 10240000, end: 0000000022EF4160)
B dbexpbuf: Buffer EIBUF (addr: 0000000022F00170, size: 4194304, end: 0000000023300170)
B dbexpbuf: Buffer ESM (addr: 0000000023310170, size: 4194304, end: 0000000023710170)
B dbexpbuf: Buffer CUA (addr: 0000000023720170, size: 3072000, end: 0000000023A0E170)
B dbexpbuf: Buffer OTR (addr: 0000000023A10170, size: 4194304, end: 0000000023E10170)
I MPI: dynamic quotas disabled.
I MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
M CCMS uses Shared Memory Key 73 for monitoring.
M
M Thu Aug 07 20:33:46 2014
M CCMS: SemInMgt: Semaphore Management initialized by AlAttachShm_Doublestack.
M CCMS: SemInit: Semaphore 38 initialized by AlAttachShm_Doublestack.
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
S *** init spool environment
S TSPEVJOB updates outside critical section: event_update_nocsec = 1
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 000000001322FCE0
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 000000002D1900D0
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 000000002D190530
S using messages for server info
S size of spec char cache entry: 297032 bytes (timeout 100 sec)
S size of open spool request entry: 2512 bytes
S immediate print option for implicitely closed spool requests is disabled
A ***GENER* Trace switched on ***
A
A ---PXA-------------------------------------------
A PXA INITIALIZATION
A System page size: 4kb, total admin_size: 22076kb, dir_size: 21360kb.
A Attached to PXA (address 000007FED3B70050, size 300000K, 1 fragments of 277924K )
A PXA allocated (address 000007FED3B70050, size 300000K)
A *** WARNING: INTERNAL_KERNEL_VERSION of message server
A unknown yet.
A abap/pxa = shared protect gen_remote
A PXA: checking structure sizes: 752|264|16
A PXA INITIALIZATION FINISHED
A ---PXA-------------------------------------------
A
A ABAP ShmAdm attached (addr=000007FFDF0EE000 leng=20955136 end=000007FFE04EA000)
A >> Shm MMADM area (addr=000007FFDF5E2970 leng=242368 end=000007FFDF61DC30)
A >> Shm MMDAT area (addr=000007FFDF61E000 leng=15511552 end=000007FFE04E9000)
A RFC Destination> destination BIG_NSP_00 host BIG system NSP systnr 0 (BIG_NSP_00)
A RFC Options> H=BIG,S=00,d=2,
A RFC FRFC> fallback activ but this is not a central instance.
A
A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 2
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
B dbtran INFO (init_connection '<DEFAULT>' [ADABAS D:720.00]):
B max_blocking_factor = 10, max_in_blocking_factor = 127,
B min_blocking_factor = 10, min_in_blocking_factor = 127,
B prefer_union_all = 1, prefer_join = 0,
B prefer_fix_blocking = 0, prefer_in_itab_opt = 1,
B convert AVG = 0, alias table FUPD = 0,
B escape_as_literal = 0,
B select * =0x0f, character encoding = STD / <none>:-,
B use_hints = abap->1, dbif->0x1, upto->4294967295
M ThrCreateShObjects allocated 29124 bytes at 0000000002BE0050
N SsfSapSecin: putenv(SECUDIR=C:\usr\sap\NSP\DVEBMGS00\sec): ok
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF library is C:\usr\sap\NSP\DVEBMGS00\exe\sapsecu.dll .
N ===...SSF default hash algorithm is SHA1 .
N ===...SSF default symmetric encryption algorithm is DES-CBC .
N ===...SECUDIR="C:\usr\sap\NSP\DVEBMGS00\sec"
N ===...loading of Security Toolkit successfully completed.
N === SAPSECULIB Version 5.4.28M-6
N =================================================
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
M JrfcVmcRegister in process-driver OK
M JrfcVmcRegisterNativesDriver o.k.
W =================================================
W === ipl_Init() called
W ITS Plugin: Path dw_gui
W ITS Plugin: Description ITS Plugin - ITS rendering DLL
W ITS Plugin: sizeof(SAP_UC) 2
W ITS Plugin: Release: 720, [7200.0.46.20020600]
W ITS Plugin: Int.version, [33]
W ITS Plugin: Feature set: [23]
W ===... Calling itsp_Init in external dll ===>
W PpioRecoverLocks, table: 000007FFE04EDB30
W PpioRecoverLocks, number of file locks 256
W PpioRecoverLocks: file lock set to: 0000000000000000
W PpioRecoverLocks: directory lock set to: 0000000000000000
W PpioRecoverLocks: global lock set to: 0000000000000000
W PpioRecoverLocks() done
W PprcRecoverLocks, table: 000007FFE04EE020
W PprcRecoverLocks: directory lock set to: 0000000000000000
W PprcRecoverLocks() done
W === ipl_Init() returns 0, ITSPE_OK: OK
W =================================================
N SignInit: successfully obtained handle for Security Context cache
N VSI: WP init in ABAP VM completed with rc=0
E Enqueue Info: rdisp/wp_no_enq=1, rdisp/enqname=<empty>, assume BIG_NSP_00
E Enqueue Info: enque/use_pfclock2 = FALSE
E Enqueue Info: row condense enabled
E Enqueue Info: enque/use_pfclock2 = FALSE
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
M
M Thu Aug 07 20:33:47 2014
M ***LOG Q0I=> NiPConnect2: 127.0.0.1:65000: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3271]
M *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 1/sock 1340
(SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:65000) [nixxi.cpp 3271]
M *** ERROR => IcmConnect: NiConnect to localhost:65000,-1 (rc=-10) [icxxext.c 182]
M *** ERROR => ThPlgConnectToIcm: IcmConnect failed (-10) [thxxplg.c 5120]
M in_ThErrHandle: 1
M *** ERROR => ThStart: connect to icman (step 1, th_errno 2, action 3, level 1) [thxxhead.c 11087]
M
M Info for wp 0
M
M pid = 7828
M severity = 0
M status = 0
M stat = WP_NEW
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M req.req_info =
M req.tid = -1
M req.uid = 4294967295
M req.mode = 255
M req.len = -1
M req.rq_id = 65535
M req.rq_source =
M req.vm = no VM
M last_tid = 0
M last_uid = 0
M last_mode = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M mode_cleaned_counter = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M attachedVm = no VM
M
M ThIErrHandle: current request:
M
M -IN-- sender_id ? tid -1 wp_ca_blk -1 wp_id -1
M -IN-- action - uid -1 appc_ca_blk -1 type -
M -IN-- new_stat NO_CHANGE mode 255 len -1 rq_id -1
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >TrThHookFunc< for event BEFORE_DUMP
M TrThHookFunc: called for WP dump
M ThCallHooks: hook >TrThHookFunc< o.k.
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M ThrSaveSPAFields: save spa fields
M ThrSaveSPAFields: not an update task, no update info saved
M ThrSaveSPAFields: not a batch task, field zttabtckey not saved
M ThCallHooks: hook >ThrSaveSPAFields< o.k.
M ThCallHooks: call hook >ThrBtcCallLgCl< for event BEFORE_DUMP
M ThCallHooks: hook >ThrBtcCallLgCl< o.k.
M ThIErrHandle: entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workp. 0 7828) [dpnttool.c 339]
// END OF FILE
i hope that we can bring my sap to runing?
best regards
mirso -
SAP Netweaver trial version installation problem
Dear friends
I tried to install SAP netwaever tial version on my labtop. I followed the instruction excatly as shown in the website www.sdn.sap.com. the first confusing thing I faced that during installation of MS loopback adapter I found that the network adapter I cfreated dose not contain (internet protocol TCP/IP instead I had internet protocol version 4 TCP/IPv4. however I used it and do IP address as specified. then I continue installation and when I finished I didnt find the following in my start up menu Programs u2013> SAP NW 7.01 ABAP Trial Version u2013> NSP. only a SAP Management Console was installed. Now I tried to uninstall SAP netweaver from my system in order to reinstall again, but I couldn't uninstall completely and each time I tried to reinstall the system keep give me waring massage that SAP already installed. even I used the registery clean tool but still facing the problem.
Please help me to completely uninstall all the SAP component from my system in order to installed it again.
Thanks in advance
Edited by: rizik_Hilan on Nov 6, 2010 8:24 PMDear Faisal
Thanks for your reply I will use the links yo sent to me in yor reply bt first of all I should uninstall all SAP component from my system. each time I run setup from image folder I always get the following massage " the Wizard has detected an already SAP system NSP on this host. Uninstall first." I need a way to remove the remaining SAP . I uninstall every folder I saw in my harddrive related to SAP and also I used registry clean tool bt still I face the problem
For yor help my friends -
SAP Netweaver 7.02 Installation PROBLEM HELP
Hi,
Have the sapservices in the windows service?
The name should follow SAP.
If so, are they started?
Cheers,
ClébioHi there,
I'm also in the process of installing NW 7.02. A few thoughts:
1. What problem warning messages do you get early in the installation process?
2. The German version could be a problem. I also tried at first to instal in Win 7 Pro 64-bit GER (ok it was running with JRE 1.6.x )and gave up. Now I've got a new HDD with a clean new Win 7 Pro SP1 64bit US-EN instal with JRE 1.5_22 and everything is going very smoothly this time.
If everything fails with your Win XP instal and you don't have access to full Windows versions in English you could try downloading an evaluation version of Windows 2008 http://www.microsoft.com/download/en/details.aspx?id=8371
- if your system runs 64bit you can also use the newer 2008 R2 version. They are good for up to 180 days.
Good luck!
Disclaimer: I'm a total noob in SAP Netweaver
Edited by: simon.g on Aug 12, 2011 10:23 PM -
SAP Netweaver Developers Studio Installation Problems?
I am not having success installing the SAP Netweaver Dvelopers Studio.
The wizard asks me for the location of the SDK (SAP DEVELOPER KIT) and I enter exactly where it is. However, it keeps telling me that this is not a valid directory...Perhaps the files became corrupt during download?
Anybody had any experience with installing this product?Hi Tom,
to install NWDS you have to first install the java development kit.
You can download it from
http://java.sun.com/j2se/1.4.2/download.html
Hope this help
Francesco -
FSL 0001 error in SAP NetWeaver '04 SR01 installation
Hi!!!
I have a problem while I'm installing SAP NetWeaver '04 SR01 installation Abap system, central installation.
I hace Oracle 9 and Windows 2003 Server. I'm installing locally. I'm installing from the hard disk (D:) and the drive E is the DVD Drive (but i'm not using it)
The installation give me the following error:
FSL-00001 System call failed. Error 267 (The directory name is invalid.
) in execution of system call 'GetTempFileName' with parameter (E:/), line (328) in file (synxcfsmnt.cpp).Hello,
I have been experiencing the same problem exactly for the last 2 days.
If you did not find any solution yet, here is the solution that worked for me perfectly.
if you are installing from your hard drive, check your cd/dvd drive if there is any cd or dvd in there, if so remove it and re-install the central instance.
YOUR CD/DVD DRIVE SHOULD BE EMPTY, all the way your installation
It should work.
good luck. -
Sneak Preview SAP NetWeaver ABAP Edition
I am trying to install Sneak Preview SAP NetWeaver ABAP Edition. Central Instance Installed sucessfully. But DB instance installation is giving error.
attaching log file as well......Please if u have any idea.
Regards
Tarun
INFO 2006-09-10 00:06:07
Copying file C:/Program Files/sapinst_instdir/NW04SR1/WEBAS_ABAP_ADA_NUC/DB/keydb.xml to: q0w9e9r8t7.1.xml.
INFO 2006-09-10 00:06:07
Copying file C:/Program Files/sapinst_instdir/NW04SR1/WEBAS_ABAP_ADA_NUC/DB/keydb.xml to: q0w9e9r8t7.1.xml.
INFO 2006-09-10 00:06:10
Successfully added privileges 'SeTcbPrivilege SeAssignPrimaryTokenPrivilege SeIncreaseQuotaPrivilege' to account 'INFOTECH3\itp2' on host '.'.
INFO 2006-09-10 00:06:11
File not found: [C:/DOCUME1/itp2/LOCALS1/Temp/sapinst_exe.3644.1157859935/msvcp71.dll].
INFO 2006-09-10 00:06:11
File not found: [C:/DOCUME1/itp2/LOCALS1/Temp/sapinst_exe.3644.1157859935/msvcr71.dll].
INFO 2006-09-10 00:06:11
Copying file C:/Program Files/sapinst_instdir/NW04SR1/WEBAS_ABAP_ADA_NUC/DB/summary.html to: C:/Program Files/sapinst_instdir/NW04SR1/WEBAS_ABAP_ADA_NUC/DB/summary.1.html.
INFO 2006-09-10 00:06:11
Copying file C:/Program Files/sapinst_instdir/NW04SR1/WEBAS_ABAP_ADA_NUC/DB/summary.html to: C:/Program Files/sapinst_instdir/NW04SR1/WEBAS_ABAP_ADA_NUC/DB/summary.1.html.
INFO 2006-09-10 00:06:11
Creating file C:\Program Files\sapinst_instdir\NW04SR1\WEBAS_ABAP_ADA_NUC\DB\summary.1.html.
PHASE 2006-09-10 00:06:11
Prepare the installation program.
INFO 2006-09-10 00:06:31
Host operation t_HostInfo_SHARED processed successfully.
INFO 2006-09-10 00:06:45
The 'saploc' share exists in directory 'C:/usr/sap'. Choosing drive C: as the SAP system drive.
INFO[E] 2006-09-10 00:07:08
Account group="infotech3\SAP_LDAP" does not exist.
INFO[E] 2006-09-10 00:07:12
Account group="ORA_NSP_DBA" does not exist.
INFO[E] 2006-09-10 00:07:17
Account group="ORA_NSP_OPER" does not exist.
INFO[E] 2006-09-10 00:07:26
Account group="infotech3\dbnspctl" does not exist.
INFO 2006-09-10 00:10:29
Removing file C:\Program Files\sapinst_instdir\NW04SR1\WEBAS_ABAP_ADA_NUC\DB\NSP_sapdb_db_parameter.txt.
INFO 2006-09-10 00:10:29
Creating file C:\Program Files\sapinst_instdir\NW04SR1\WEBAS_ABAP_ADA_NUC\DB\NSP_sapdb_db_parameter.txt.
ERROR 2006-09-10 00:10:35
FSL-02015 Node C:/Documents/DATA does not exist.
ERROR 2006-09-10 00:10:35
MSC-01003 ESyException: ESAPinstException: error text undefined
WARNING 2006-09-10 00:10:35
The step fillR3loadPackageTable with step key SAPSYSTEM_DB|ind|ind|ind|ind|ind|0|SAPSYSTEM|ind|ind|ind|ind|ind|0|SAPComponent|ind|ind|ind|ind|ind|0|DatabaseLoad|ind|ind|ind|ind|ind|0|fillR3loadPackageTable was executed with status ERROR.Welcome to SDN
Check out the following thread.
SAP NetWeaver Sneak Preview: Database Instance Installation
Please search the forum before posting.
If your question is answered, reward the helpful answers and mark the thread as answered.
Regards
Raja -
SAP Netweaver 7.3 Installation
Hi Experts,
Am trying to find usefull installation information or guides for NW7.3
I have searched in Market Place.
But ended with lot of confusion at this point, which i have to download for installation.
https://websmp106.sap-ag.de/~form/handler?_APP=00200682500000001943&_EVENT=DISPHIER&HEADER=Y&FUNCTIONBAR=N&EVENT=TREE&NE=NAVIGATE&ENR=01200314690800000134&V=MAINT&TA=ACTUAL&PAGE=SEARCH
Is there is any Trail version avaialble?
Can anyone let us know what all the files i need to download for installation.
Regards,
Eswari AHi Eswari,
You can find the installation guides in the SMP using the links specified below.
https://websmp204.sap-ag.de/instguides
SAP NetWeaver - > SAP NetWeaver 7.3 - > Installation
You should be able to find these medias in Service Marketplace
(http://service.sap.com/swdc) under the following:
> Installations and Upgrades
> Browse our Download Catalog
> SAP NetWeaver and complementary products
> SAP NetWeaver
> SAP NETWEAVER 7.3
And also I would request you to refer the following notes specified
below.
1403832 - Central Note: Upgrade Systems on SAP NetWeaver 7.3
1390477 - Additional info about the upgrade to SAP NetWeaver 7.3
1532805 - Add-On Compatibility of SAP NetWeaver 7.3
1468349 - SAP Business Suite 7 for SAP NetWeaver 7.3 hub systems
1615463 - SAP Business Suite 7i 2010 for SAP NetWeaver 7.3 hub systems
1603103 - SMSY: NetWeaver 7.3 upgrade
Thank You.
Regards,
Deepika -
SAP NetWeaver Developer Studio Installation guide
Hi All,
Could you please provide the SAP NetWeaver Developer Studio Installation guide?
Thanks & Regards
SaraHi Sara,
Go to https://service.sap.com/nw04installation go to the bottom of the page expand <b>dev env</b> and you'll see the <b>Installation Guide - SAP NetWeaver Developer Studio</b>
this should answer your question.
Regards
Juan
Please reward with points if helpful -
Problem with SAP NetWeaver 04 SP16 installation when running Phase 6
Hi,
When I was installing SAP NetWeaver 04 SP16(Full Java Edition),I got this error in phase 6:
ERROR 2006-04-20 03:10:23
MDB-07001 No action defined for actor.
ERROR 2006-04-20 03:10:23
CJS-00030 Assertion failed: in function sapdb_db_create(db_nm, db_host, db_ver) { var
dep_root = sapdb_inst_root(db_nm); var sdb_i = new sdbInstance(); sdb_i.dbName =
db_nm; sdb_i.dbHost = db_host; sdb_i.dbVer = db_ver[0] + "." + db_ver[1];
sdb_i.ctlUser = sapdb_get_db_user("CONTROL", db_nm, db_host); sdb_i.ctlUserPasswd =
sapdb_get_db_user_passwd("CONTROL", db_nm, db_host); var actorObj = new SdbExtActor();
actorObj.setSdbInstance(sdb_i); actorObj.setDbmCmd("DB_CREATE");
actorObj.setExecutable(sapdb_dbmcli_path()); actorObj.setDbRoot(dep_root); var rv =
actorObj.sessionExecute(); ASSERT(arguments.callee, rv == "OK", " SDB: ERROR CREATING
DATABASE INSTANCE! Check the XCMDOUT.LOG FILE"); var creation_ok = false; var i_size
= actorObj.outSize(); for (var i = 0; i < i_size; i++) { var s_line =
actorObj.getOutputLine(i); if (/OK/.test(s_line)) { creation_ok = true;
} } ASSERT(arguments.callee, creation_ok, "SDB: ERROR WHILE DB INSTANCE
CREATION! CHECK THE XCMDOUT.LOG FILE! ");} SDB: ERROR CREATING DATABASE INSTANCE! Check the XCMDOUT.LOG FILE
my installing environment:
OS: windows 2000 server
RAM: 2G
JAVA SDK version: 1.4.2_08
Thanks advance.Hi
Please see this thread of the SDN forum
SP16 Preview: MaxDB Installation fails (Phase 6)
Seems some issues with MAX DB ver 7.6
regards
rajeshkr -
SAP NW Java Slim Edition Installation Error
HI All,
While i'm installing SAP NW Java Slim Edition
I'm getting below error(ERR-24936,ERR_DBNORUN: Database instance is not running).
Could someone help me to fix this issue.
Thanks,
Chandra,
ERROR 2006-08-19 00:06:53
CJS-00030 Assertion failed: in function sapdb_check_schema(dbhost, dbname, db_sch)
{ var r_v = false; var sdbInst = new sdbInstance(); sdbInst.dbName = dbname;
sdbInst.dbHost = dbhost; var sql_statement = "SELECT USERNAME FROM DOMAIN.USERS";
var r_arr = sdb_sql_query(sql_statement, sdbInst); ASSERT(arguments.callee,
r_arr != undefined, "ERROR EXECUTING DBMCLI COMMAND!"); if (r_arr[0] == "false")
{ var err_msg = "ERROR EXECUTING SQL QUERY: ";
for (var i_cnt = 1; i_cnt < r_arr.length; i_cnt++) { err_msg = err_msg + r_arr[i_cnt]; }
ASSERT(arguments.callee, false, err_msg); } else {
var cmp_s = new RegExp("'" + db_sch.toUpperCase() + "'");
for (var i_cnt = 0; i_cnt < r_arr.length; i_cnt++)
{ if (cmp_s.test(r_arr[i_cnt])) { r_v = true; } } } return r_v;}
ERROR EXECUTING SQL QUERY: Error! Connection failed to node Chandu for database
J2E: ERR_USRFAIL: user authorization failed
ERROR 2006-08-19 00:24:55
CJS-00030 Assertion failed: in function sapdb_check_schema(dbhost, dbname, db_sch)
{ var r_v = false; var sdbInst = new sdbInstance(); sdbInst.dbName = dbname;
sdbInst.dbHost = dbhost; var sql_statement = "SELECT USERNAME FROM DOMAIN.USERS";
var r_arr = sdb_sql_query(sql_statement, sdbInst);
ASSERT(arguments.callee, r_arr != undefined, "ERROR EXECUTING DBMCLI COMMAND!");
if (r_arr[0] == "false") { var err_msg = "ERROR EXECUTING SQL QUERY: ";
for (var i_cnt = 1; i_cnt < r_arr.length; i_cnt++) { err_msg = err_msg + r_arr[i_cnt]; }
ASSERT(arguments.callee, false, err_msg); } else
{ var cmp_s = new RegExp("'" + db_sch.toUpperCase() + "'");
for (var i_cnt = 0; i_cnt < r_arr.length; i_cnt++) { if (cmp_s.test(r_arr[i_cnt]))
{ r_v = true; } } } return r_v;}
ERROR EXECUTING SQL QUERY:
ERR-24936,ERR_DBNORUN: Database instance is not runningHi Chandra,
Did you install SAPDB?. Seems like the DB is not installed or is offline, <b>ERROR EXECUTING DBMCLI COMMAND</b> seems like DBMCLI commands are not been recognized.. Did you when through all th pre-installation checks?
Regards
Juan
Please reward with points if helpful -
SAP Netweaver 7.0 installation - serious issue (startsap db n4sadm)
Hi,
We are trying to setup SAP Netweaver 7.0 (Test Drive x-86 edition) on Fedora 12. We have successfully ran the "install.sh" file. The DB2 instance gets installed and we are able to start it as 'db2n4s' user using the 'db2start' command (we could as well stop using db2stop).
But, we are facing issues when we start the db2 instance as prescribed by the SAP Netweaver installation guide for the following command.
n4shost:n4sadm 52> startsap db n4shost
Checking db6 db Database
ABAP Database is not available via R3trans
Starting SAP-Collector Daemon
expand: write error: Broken pipe
expand: write error
* This is Saposcol Version COLL 20.94 700 - v2.00, Intel x86 with Linux, 2007/02/16
* Usage: saposcol -l: Start OS Collector
* saposcol -k: Stop OS Collector
* saposcol -d: OS Collector Dialog Mode
* saposcol -s: OS Collector Status
* Starting collector (create new process)
saposcol on host pwc01 started
Running /usr/sap/N4S/SYS/exe/run/startdb
SQL1042C An unexpected system error occurred. SQLSTATE=58004
Activate database failed
R3trans connect failed
DB startup failed
Details of our DB2 instance
[db2n4s@]$ ./db2licm -l
Product name: "DB2 Enterprise Server Edition"
License type: "CPU"
Expiry date: "Permanent"
Product identifier: "db2ese"
Version information: "9.1"
Annotation: "-3;(_c)"
Features:
DB2 Database Partitioning: "Licensed"
DB2 Performance Optimization ESE: "Not licensed"
DB2 Storage Optimization: "Licensed"
DB2 Advanced Access Control: "Not licensed"
DB2 Geodetic Data Management: "Not licensed"
Homogeneous Federation for DB2: "Licensed"
DB2 Pure XML ESE: "Not licensed"
Thanks,
SriramThanks for your quick reply.
I actually went ahead one step in the problem. Now i am getting the following message when i try to start the sap.
n4shost:n4sadm 55> startsap db n4shost
Warning: Could not found virtuell host in ifconfig list
Checking db6 db Database
ABAP Database is not available via R3trans
Starting SAP-Collector Daemon
expand: write error: Broken pipe
expand: write error
* This is Saposcol Version COLL 20.94 700 - v2.00, Intel x86 with Linux, 2007/02/16
* Usage: saposcol -l: Start OS Collector
* saposcol -k: Stop OS Collector
* saposcol -d: OS Collector Dialog Mode
* saposcol -s: OS Collector Status
* Starting collector (create new process)
saposcol on host pwc01 started
Running /usr/sap/N4S/SYS/exe/run/startdb
11/10/2010 14:17:12 0 0 SQL1063N DB2START processing was successful.
SQL1063N DB2START processing was successful.
Database activated
R3trans connect failed
DB startup failed
Also i did the R3trans -d and have attached the log.
4 ETW000 R3trans version 6.14 (release 700 - 11.04.07 - 14:28:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 10.11.2010 - 14:19:38
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Wed Nov 10 14:19:38 2010 83 0.000083
4 ETW000 [dev trc ,00000] db_con_init called 21 0.000104
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 29 0.000133
4 ETW000 [dev trc ,00000] Loading DB library '/usr/sap/N4S/SYS/exe/run/dbdb6slib.so' ...
4 ETW000 35 0.000168
4 ETW000 [dev trc ,00000] load shared library (/usr/sap/N4S/SYS/exe/run/dbdb6slib.so), hdl 0
4 ETW000 191 0.000359
4 ETW000 [dev trc ,00000] Library '/usr/sap/N4S/SYS/exe/run/dbdb6slib.so' loaded
4 ETW000 21 0.000380
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library /usr/sap/N4S/SYS/exe/run/dbdb6slib.so
4 ETW000 27 0.000407
4 ETW000 [dev trc ,00000] Version of '/usr/sap/N4S/SYS/exe/run/dbdb6slib.so' is "700.08", patchlevel (0.107)
4 ETW000 85 0.000492
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library /usr/sap/N4S/SYS/exe/run/dbdb6slib.so
4 ETW000 24 0.000516
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library /usr/sap/N4S/SYS/exe/run/dbdb6slib.so
4 ETW000 27 0.000543
4 ETW000 [dev trc ,00000] New connection 0 created 18 0.000561
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 27 0.000588
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 20 0.000608
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse:
4 ETW000 21 0.000629
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 25 0.000654
4 ETW000 [dev trc ,00000] DB2 library successfully loaded DB2 library '/db2/db2n4s/sqllib/lib32/libdb2.so' successfully loaded
4 ETW000 7545 0.008199
4 ETW000 [dev trc ,00000] RLIMIT_STACK: current=10485760, max=0 40 0.008239
4 ETW000 [dev trc ,00000] DB6 (DB2 UDB) UNICODE database interface 700.08 [opt]
4 ETW000 23 0.008262
4 ETW000 [dev trc ,00000] DB6 shared library (dbdb6slib) patchlevels 15 0.008277
4 ETW000 [dev trc ,00000] (0.8) DB6: V8.2.2 optguidelines in OPEN SQL (note 150037)
4 ETW000 22 0.008299
4 ETW000 [dev trc ,00000] (0.8) Support of SDBUPDEXCL (note 847616) 14 0.008313
4 ETW000 [dev trc ,00000] (0.9) DB6: use export file for dbdb6slib (note 835135)
4 ETW000 21 0.008334
4 ETW000 [dev trc ,00000] (0.9) DB6: Core in getAndBindSQLDA (note 833183)
4 ETW000 30 0.008364
4 ETW000 [dev trc ,00000] (0.10) DB6: link dbdb6slib.dll on windows with libdb6.obj (note 761159)
4 ETW000 22 0.008386
4 ETW000 [dev trc ,00000] (0.10) DB6: DUPLICATE_KEY on MERGE -> repeat (note 851474)
4 ETW000 21 0.008407
4 ETW000 [dev trc ,00000] (0.15) DB6: wrong CAST for short string ABAP type (note 861905)
4 ETW000 22 0.008429
4 ETW000 [dev trc ,00000] (0.17) DB6: special characters in sidadm passwd (note 865839)
4 ETW000 21 0.008450
4 ETW000 [dev trc ,00000] (0.21) DB6: no SAP_INFO comments (note 873889)
4 ETW000 22 0.008472
4 ETW000 [dev trc ,00000] (0.22) DB6: hints: get correlation names from view texts (note 868888)
4 ETW000 20 0.008492
4 ETW000 [dev trc ,00000] (0.23) DB6: hints: get correlation names from view texts (note 868888)
4 ETW000 22 0.008514
4 ETW000 [dev trc ,00000] (0.26) DB6: DB6_DBSL_CLP_COMMAND STRING_BAD_REF (note 883402)
4 ETW000 22 0.008536
4 ETW000 [dev trc ,00000] (0.27) DB6: activate value compression (note 886231)
4 ETW000 20 0.008556
4 ETW000 [dev trc ,00000] (0.28) DB6: optimization guidelines on views part 2 (note 868888)
4 ETW000 22 0.008578
4 ETW000 [dev trc ,00000] (0.30) DB6: no SQL trace for SQLCancel (note 892111)
4 ETW000 21 0.008599
4 ETW000 [dev trc ,00000] (0.33) DB6: append SAP_TA comment (note 873889)
4 ETW000 22 0.008621
4 ETW000 [dev trc ,00000] (0.34) DB6: activate value compression with quoted names (note 886231)
4 ETW000 21 0.008642
4 ETW000 [dev trc ,00000] (0.36) DB6: Repeat isolated DDL statements after SQL0911 (note 901338)
4 ETW000 22 0.008664
4 ETW000 [dev trc ,00000] (0.41) DB6: add V9 to list of supported DB2 releases (note 912386)
4 ETW000 23 0.008687
4 ETW000 [dev trc ,00000] (0.50) DB6: reread passwords for secondary connections (note 931742)
4 ETW000 22 0.008709
4 ETW000 [dev trc ,00000] (0.52) DB6: double quote table names in optguidelines (note 868888)
4 ETW000 33 0.008742
4 ETW000 [dev trc ,00000] (0.54) DB6: error handling in DBSL CLP (note 940260)
4 ETW000 22 0.008764
4 ETW000 [dev trc ,00000] (0.69) DB6: technical support of DB2 CLI driver (note 962892)
4 ETW000 23 0.008787
4 ETW000 [dev trc ,00000] (0.73) DB6: log table name on TRUNCATE failure (note 970743)
4 ETW000 22 0.008809
4 ETW000 [dev trc ,00000] (0.79) DB6: column type XML in index size calculation (note 982993)
4 ETW000 27 0.008836
4 ETW000 [dev trc ,00000] (0.82) DB6: CAST for SSTRING data types (note 989568)
4 ETW000 21 0.008857
4 ETW000 [dev trc ,00000] (0.86) DB6: long runtimes for R3szchk (note 1000847)
4 ETW000 22 0.008879
4 ETW000 [dev trc ,00000] (0.88) DB6: patch collection Dec 06 (note 1005574)
4 ETW000 22 0.008901
4 ETW000 [dev trc ,00000] (0.96) DB6: patch collection Jan 07 (note 1017852)
4 ETW000 22 0.008923
4 ETW000 [dev trc ,00000] (0.97) DB6: CLP commands with DB2 CLI Driver (note 1024102)
4 ETW000 21 0.008944
4 ETW000 [dev trc ,00000] (0.99) DB6: SUBSTITUTE VALUES with FAE statements (note 1028779)
4 ETW000 21 0.008965
4 ETW000 [dev trc ,00000] (0.107) DB6: patch collection Apr 07 (note 1047194)
4 ETW000 31 0.008996
4 ETW000 [dev trc ,00000] Supported features: 16 0.009012
4 ETW000 [dev trc ,00000] ..retrieving configuration parameters 19 0.009031
4 ETW000 [dev trc ,00000] ..done 70 0.009101
4 ETW000 [dev trc ,00000] Running with UTF-8 Unicode 15 0.009116
4 ETW000 [dev trc ,00000] *** ERROR in DB6Connect[dbdb6.c, 1634] CON = 0 (BEGIN)
4 ETW000 31472 0.040588
4 ETW000 [dev trc ,00000] &+ DbSlConnectDB6( SQLConnect ): [IBM][CLI Driver] SQL30082N Security processing failed with reason "15" ("PROCESSIN
4 ETW000 25 0.040613
4 ETW000 [dev trc ,00000] &+ G FAILURE"). SQLSTATE=08001
4 ETW000 23 0.040636
4 ETW000 [dev trc ,00000] &+
4 ETW000 25 0.040661
4 ETW000 [dev trc ,00000] &+
4 ETW000 24 0.040685
4 ETW000 [dev trc ,00000] &+
4 ETW000 22 0.040707
4 ETW000 [dev trc ,00000] *** ERROR in DB6Connect[dbdb6.c, 1634] (END) 26 0.040733
4 ETW000 [dbdb6.c ,00000] *** ERROR => DbSlConnect to 'N4S' as 'sapn4s' failed
4 ETW000 60 0.040793
2EETW169 no connect possible: "DBMS = DB6 --- DB2DBDFT = 'N4S'"
Thanks,
Sriram -
SAP NetWeaver 04s SP7 installation and DHCP server
Hi All,
I am installing SAP NetWeaver on a machine which I use at work. I am little scared whether this installation might harm my computer or the local corporate network. This machine is connected to the local network (uses DHCP) to get the IP address.
Are there any precautions which I need to take before I start practicing on this platform ?
I read this below point in the installation instructions...
=========================================================
If no DHCP server is available on your network (which dynamically determines the IP address) or your computer is not connected to any network, you need to install the virtual interface adapter MS Loopback Adapter. This is described in detail within the contents of the download package.
=========================================================
Now as my computer is using DHCP (unknown location), if I install SAP NetWeaver 04s SP7, do I need to disconnect my comp from the Network and then install the MS loopback adapter ? or Its ok to ignore the DHCP option as my comp is already using DHCP ?
Thanks and Best Regards
Ayub.Hi Ayub,
U dont need to disconnect ur computer from network. Just install a microsoft loopback adapter and assign it a static ip, and assign that ip and hostname on windows\etc\hosts file. it will installs on loopback adapter and ur local network connection will be as it is.
hope it will help u.
Regards
Subhash -
SAP Netweaver 7 (2004) installation guide
Hi,
I am trying to install SAP Netweaver 7 (2004) in my desktop. But I am
having problems with it. I do not know how to create a DDIC user and its password. At the last phase of installation it is trying to perform a test logon with DDIC user but failing. I am sure with my system hardware requirements. Can anybody give me a solution, or give me a installation guide which can help me to make it through ?
Please help...............Hi,
DDIC is a default user.No need to create it.Its password is the master password that you should have given during the time of installation or you can give the password 19920706 which is defined by SAP.
DDIC is mainly for working Transport Mnagement System(TMS). -
SAP Netweaver 7.01: JSPM Problem
Hi,
I have this system:
SAP netweaver Abap+Java 7.01 SP3
I want to update the Java whit JSPM to sp 06, when i try it give me this error:
Jun 13, 2011 10:57:44 AM [Error]: Cannot stop service for instance -1.
Jun 13, 2011 10:57:44 AM [Error]: Cannot stop service for instance SID_SapOsCol. See STOP_SERVICE_SapOsColnull_01 for details.
Jun 13, 2011 10:57:44 AM [Error]: Cannot stop OS services, SCS instance and J2EE instance.
Jun 13, 2011 10:57:44 AM [Error]: Cannot stop J2EE instance, SCS instance or OS services.
I have tried to make whit configtool in to SAFE mode...
But nothin... have any ideas?STOP_SERVICE_SAPOSCOLNULL_03.OUT:
failure: OpenService, NT ErrorMessage: Access is denied.
The problem are HERE, coz the warnig XML are not important i think, coz the same problem is here if i try deployment whit Single Package metod (select all the package). i stay to become crazy!
SDMLOG
Jun 13, 2011 10:53:24... Warning: Unsupported XML-element reading <fileset>
Jun 13, 2011 10:53:24... Warning: Unsupported XML-element reading <fileset>
Jun 13, 2011 10:53:24... Warning: Unsupported XML-element reading <fileset>
Jun 13, 2011 10:53:24... Warning: Unsupported XML-element reading <fileset>
Jun 13, 2011 10:53:24... Warning: Unsupported XML-element reading <fileset>
Jun 13, 2011 10:53:24... Warning: Unsupported XML-element reading <fileset>
Jun 13, 2011 10:53:24... Warning: Unsupported XML-element reading <fileset>
Jun 13, 2011 10:53:24... Warning: Unsupported XML-element reading <fileset>
Jun 13, 2011 10:53:24... Warning: Unsupported XML-element reading <fileset>
Jun 13, 2011 10:53:24... Warning: Unsupported XML-element reading <fileset>
Jun 13, 2011 10:53:24... Warning: Unsupported XML-element reading <fileset>
Jun 13, 2011 10:53:24... Warning: Unsupported XML-element reading <fileset>
Jun 13, 2011 10:53:24... Info: Ending deployment prerequisites. All items are correct.
Jun 13, 2011 10:53:28... Info: -
Ending validation -
Jun 13, 2011 10:53:28... Info: Delete the files from D:\usr\sap\BJT\JC01\SDM\program\temp
Jun 13, 2011 10:53:28... Info: Close client connection to TSTSAPBIW01V/172.24.64.41, remote port 50699
Jun 13, 2011 10:54:23... Info: ====================================
Jun 13, 2011 10:54:23... Info: JControl is shutting SDM Server down
Jun 13, 2011 10:54:23... Info: ====================================
Jun 13, 2011 10:54:23... Info: Server finished sending back the answer of the ShutdownRequest.
Jun 13, 2011 10:54:23... Info: Shutting dispatcher down
Jun 13, 2011 11:02:54... Info:
Jun 13, 2011 11:02:54... Info: ============================================
Jun 13, 2011 11:02:54... Info: = Starting to execute command 'server' =
Jun 13, 2011 11:02:54... Info: ============================================
Jun 13, 2011 11:02:54... Info: Starting SDM - Software Deployment Manager...
Jun 13, 2011 11:02:55... Info: tc/SL/SDM/SDM/sap.com/SAP AG/7.0103.20081105085605.0000
Jun 13, 2011 11:02:56... Info: SDM operation mode successfully set to: Integrated
Jun 13, 2011 11:02:57... Info: JStartupFramework is requesting to start the SDM Server.
Jun 13, 2011 11:02:57... Info: Start the SDM Server integrated in the JStartupFramework.
Jun 13, 2011 11:02:57... Info: Initializing Network Manager (50117)
Jun 13, 2011 11:02:57... Info: Starting SDM Server listening on port 50118
Jun 13, 2011 11:02:57... Info: SDM started successfully.
Jun 13, 2011 11:04:55... Info: ====================================
Jun 13, 2011 11:04:55... Info: JControl is shutting SDM Server down
Jun 13, 2011 11:04:55... Info: ====================================
Jun 13, 2011 11:04:55... Info: Server finished sending back the answer of the ShutdownRequest.
Jun 13, 2011 11:04:55... Info: Shutting dispatcher down
SDMCL.log
un 13, 2011 10:53:24... Warning: Unsupported XML-element reading <fileset>
Jun 13, 2011 10:53:24... Warning: Unsupported XML-element reading <fileset>
Jun 13, 2011 10:53:24... Warning: Unsupported XML-element reading <fileset>
Jun 13, 2011 10:53:24... Warning: Unsupported XML-element reading <fileset>
Jun 13, 2011 10:53:24... Warning: Unsupported XML-element reading <fileset>
Jun 13, 2011 10:53:24... Warning: Unsupported XML-element reading <fileset>
Jun 13, 2011 10:53:24... Warning: Unsupported XML-element reading <fileset>
Jun 13, 2011 10:53:24... Warning: Unsupported XML-element reading <fileset>
Jun 13, 2011 10:53:24... Warning: Unsupported XML-element reading <fileset>
Jun 13, 2011 10:53:24... Warning: Unsupported XML-element reading <fileset>
Jun 13, 2011 10:53:24... Warning: Unsupported XML-element reading <fileset>
Jun 13, 2011 10:53:24... Warning: Unsupported XML-element reading <fileset>
Jun 13, 2011 10:53:24... Info: Ending deployment prerequisites. All items are correct.
Jun 13, 2011 10:53:28... Info: -
Ending validation -
Edited by: davide lancellotti on Jun 13, 2011 12:06 PM
Maybe you are looking for
-
Changing a variables length for text input in Captivate 6
I am using eLearning CS6 (non-subscription I believe, but no one at my office can confirm) and use a machine where all software is deployed via push from IT. The ability to check for updates has been removed from me. I need to be able to have users e
-
HP Deskject 3050 will not print on my wireless network
Help please. I have been unable to print from the deskjest 3050 on my wirless network.
-
Problems Connecting Apple Bluetooth Devices in Windows using BootCamp
People are having trouble connecting bluetooth devices in windows 7 while using bootcamp. I solved the problem by clicking on bluetooth>ADD A DEVICE once windows has detected the bluetooth device you want to add. Now, right click on the device you ar
-
Error message when migrating Mail.
I've installed Yosemite on a 5 or 6 year old iMac. When I try and open mail it starts to migrate my old data and I get this error message: Your Mail index has been damaged. To repair it quit Mail. Mail will repair the index the next time you open Mai
-
What do you think of reading the "Head First Java" book in preparatino for the SCJP Certification exam? Its written by the same author that wrote "SCJP Sun Certified Programmer for Java 5 Study Guide". So I assume the contents/layout should be simila