SAP Personnel Development - Qualification Inheritance

In implementing our Personnel Development module, we have qualifications related to tasks. Tasks are related to an org unit, job, or position. When running report for qualification gaps, the report generated did not consider the qualification inheritance from Task to org unit, and position thus causing a big qualification deficit. What is needed to allow the deficit report to  take into consideration qualifications related to tasks which are related to positions or org units...
Thanks for your assistance
chen

Hi,
what relationship (i.e. subtype)  have you created between Q and T? Same question for T to O ans S?
I've used the same set-up (Q to T and T to S or O) before and had no issues with the 'deficit' - report? I'm 100% sure that we didn't change the report so it seems it must be something else.
Wilfred.

Similar Messages

  • HR, Personnel Development -- Qualifications: I need to extract text

    Hi,
    I am using standard content ( DataSource: 0HR_PA_PD_1 and InfoCube: 0PAPD_C01 ) to extract Qualifications data from ERP. The extraction and the report work fine so far. But what I would prefer rather then having a NUMC Type on the Qualifications attribute - is the text for the attribute 'QUALIFICATION'. When I checked the DS I could not find such a field for the that.
    Question:
    How am I able to extract the Qualifications text? I don't want the qualification number (here of type numc) to appear in the report. Do I have to enhance the standard DS in terms of adding a new field (with the according fieldtype) and mapping in FM accordingly?
    Any help is welcome!!!
    Thanks!
    BR,
    Erdal

    Hi BI C,
    thanks for the information! I have just done what you adviced - but in my case in 0QUALIFICTN_TEXT I have following fields: LANGU, KEY1, DATETO, DATEFROM, TXTSH, TXTMD wheres in the InfoCube I have a lot more, of course. The point is that only KEY1 is mapped to 0QUALIFICTN. What about the other fields in the DS? E.g. how can I map field TXTSH? Hope this isn't too stupid of a question.
    Btw: I did an extraction the way it was and I had no data in the cube though. Perhaps it is because the mapping is not accomplished yet.
    Thanks a lot in advance!
    BR,
    Erdal

  • Personnel Development- Qualification transfer

    Hi Gurus,
    Good Day!
    I require the automatic transfer of Qualification(skills) should be there (PD) after each appraisal and training so that employer or the senior came to know his competencies for next growth (career plan).
    What  configurations are required for this in PA and PD module please explain me in detail.
    Awaiting for an early response.
    Thanks in advance.
    Regards,
    Neeta

    Hi,
    Good Day!
    Thanks for reply but again i want to ask that how qualification will transfer from Appraisal to his skill matrix(qualification) as i have already assigned a follow up processing -> RHPA_APP_PROCESS_FINAL_QUALI -> to each appraisal model?
    When I make relations between Qualification and Business event then it will transfer automatically but my question is that how I will do the follow up activity for this?
    Can u tell me the steps using Tcodes? Actually I am new to PD and TEM sub modules so i want detail description on this.
    It would be appreciable if anybody can provide me a configuration document for this in Indian senerio.
    Regards,
    Neeta

  • Message types for SAP HR Personnel Development and LMS modules

    Hi Friends,
    I had a requirement to create ALE's for SAP HR LMS module and Personnel Development module.
    So, what are the message types and IDoc s are availble. Earlier replies could be appreciated.
    Thanks,
    Pavan.

    Hi Nayani,
    The Message type is HRMD_A for HCM to HCM with basic types HRMD_A01 to HRMD_A07(HRMD_A07 is the latest).
    From HCM to Non Hr/CRM/SRM  is HRMD_ABA.
    Br/Manas

  • CAREER  PLANNING IN PERSONNEL DEVELOPMENT

    Hello Everyone,
    1)In career planning, u create a career using the following path,
    HUMAN RESOURCES -> PERSONNEL MANAGEMENT-> PERSONNEL DEVELOPMENT -> SETTINGS -> CURRENT SETTINGS -> EDIT CAREERS.
    Here in EDIT CAREERS i have created a new career ,e.g. "SAP career", which can be included in the CAREER PLANNING as one of the planning criteria that is additional career. I have included  potential, preferences, qualifications,designations and  additional careers as my planning criteria.
    Is this the career() for which we plan an object(in my case PERSON) or do we plan the person to just any position or job created..???
    2)  Also in CAREER PLANNING, we can see the person's(object) qualifications, potentials, preferences, careers, dislikes and designations.
    Under designation, jobs and positions appear.
    Are these the job and position the object(Person) is holding before Career planning is done or is he going to hold them after career planning is done???
    In that case what is the use of additional careers??
    am really confused.
    Plz do help
    Thanks,
    Pooja Dev

    Hi
    There will be multiple places that you might need to update the program. But I would suggest that you should try with updating the evaluation path QUALDATA with your new Z object.

  • Personnel Development [APPAISALS}

    PLEASE SUGGEST THE STEPS INVOLVED IN CONFIGURING PERSONNEL DEVELOPMENT; SPECIALLY PERFORMANCE APPRAISALS. I HAVE ALREADY CREATED A QUALIFICATION CATALOGUE AND AN APPRAISAL CATALOGUE BUT WHEN I RUN 'APPCREATE' IT ONLY SHOWS ONE LINE IN THE PERFORMANCE APPRAISAL SCREEN. WHERE ARE THE QUALIFICATIONS I HAD CREATED? THEY ARE AVAILABLE IN PROFILE DISPLAY (PPPD) BUT NOT IN "APPCREATE". I NEED TO RATE THE EMPLOYEE IN APPRAISAL ON THE BASIS OF THESE QUALIFICATIONS. PLEASE HELP. THANKS IN ADVANCE.

    Kumar,
    Welcome to SDN.
    You can get the full infomation from SAP market place,
    Re: OSA - Appraisal template
    Rgds,
    Jothi.P
    P.S : Do award points for helpful answers.This is the SDN way of saying Thanks.

  • HR-Personnel Development-Proficiency Level Using Info Type:24

    Hi !
    I am working on Personnel Development of HR Module on SAP 4.70 .
    I am Developing an Z Report in which I wish to display service Order with all the details & Employee assigned within it .
    I am unable to display employee with their Proficiency level.
    Proficiency level of employee is maintained via Transaction 'PA30' &
    Info Type 24 .
    Can anybody tell me how can I fetch the Proficiency Level of Person (PERNR Field ) .
    Is there any Function Module is there OR It's storing in any table?
    Regards
    Sachin S M

    Hello Sachin,
    Employee proficiency is store in IT 0024, which is table PA0024 technically. To read this you can do select statement on table PA0024 or using function module HR_READ_INFOTYPE

  • Personnel Development or Talent Management

    Hi Experts,
    When we talk of Personnel Development in EHp 6.0 does it refer to Talent management as qualifications, appraisals also available in Talent management.
    Does it mean that PD is nomore a separate submodule & if we go with Talent Managemnt then we have have the employee devlopment also.
    So no need of going with PD , Dev activity can be achieved through Talent,is it so?
    Please guide.

    Hi Martin,
    Thanks you very much for the assistance.
    The client wants employee development:
    Short Term & Long Term Dev Plan for Employees.
    Track & Monitor the progress of employee.
    Profile Matchup against positions to determine skills & knowledge of the employee.
    Training plans to adress the individual dev needs.
    These are few of the needs, but i dont think we have all these available in Talent.
    Please guide.

  • Personnel Development

    Hi,
    Can pls check with the Requirment i sent wheather these Business Process i prepared is correct or not if not pls do some changes and send me
    Business Process of Personnel Development
    If you want to use all the functions in the Personnel Development component, you also need to
    have implemented the Organizational Management component.
    Appraisals:.
    1.Prepare the appraisal.
    2.Holding the appraisal.
    3.Completion the appraisal.
    4.Approval Process
    5.Perform follow-up activities for the appraisal.
    6.Appraisal Procedure
    7.Appraisal Type
    8.Form of appraisal
    9.Appraisal Criteria
    Succession Planning
    In Succession Planning to find people to fill unoccupied positions.
    1. Obtain information on potential successors.
    2. To obtain further information on the potential successors, you might need to carry out a
    personnel appraisal.
    3. Once you have carried out these personnel appraisals and have the information you
    need, establish a procedure for selecting potential successors.
    4. If you need to make organizational arrangements, arrange a time and place, and invite
    the persons involved.
    5. Select potential successors on the basis of the selection procedure you defined.
    6. Once you have selected potential successors, evaluate them.
    7. On the basis of the evaluations of the potential successors, decide who the successor(s)
    for the position in question is/are to be
    1 Maintain qualifications catalog
    2 Maintain organizational structure
    3. Maintain development plans
    4 Maintain career plans
    5. Maintain own qualifications
    6. Maintain employee profiles
    7. Maintain requirements profiles
    8.Identify deficiencies in qualifications
    9 Identify further development needs
    Career Planning
    In Career Planning, you can identify possible career goals and draw up career plans for employees
    1. Obtain information on the employee whose career you want to plan.
    2. If necessary, find out about any predefined careers.
    3. Find out about any relevant company-specific conditions.
    4. Obtain information on the target posts (jobs, positions) within your company.
    5. On the basis of the information at your disposal, define possible target posts for the
    employee. If you wish, define possible careers.
    6. Decide whether the possible target positions are suitable for the employee.
    7. On the basis of this decision, draw up a career plan for the employee.

    Hi Sneha,
    Good One,
    Regards,
    Kapil

  • Need help in personnel development

    Could some one explain me what are the personnel development infotypes (PD).

    Please post your question here
    SAP ERP Human Capital Management (SAP ERP HCM)
    Thanks,
    Prasath N

  • Personnel Development (PD)

    Hi all SAPGURUS ,
    Can anyone tell me what is the use of Personnel Development component in SAP HR and if any one have any documentation please forward it to me Its very Urgent ..thanks for your for your effort of sending and Really appreciate if some one send documentation or Detail procedure of customising PD in SAPHR
    my email id is                [email protected]
    Regards
    Sameer

    Hi,
    Here is everything you want to know about PD.
    <a href="http://help.sap.com/saphelp_erp2005vp/helpdata/en/cd/dae8a24ab011d18a0f0000e816ae6e/frameset.htm">PD</a>
    <a href="http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAPD/PAPD.pdf">PD1</a>
    <a href="http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAXX/PYINT_INFOTYP_PD.pdf">Infotype in PD</a>
    regards,
    Amit
    Reward all helpful replies.

  • Deploy Personnel Development EHP4 in ESS/MSS EHP5

    Dear Experts,
    We have a customer that is using Personnel Development Module in EHP4 - SAP Netweaver Portal.
    Recently, they have decided to implement ESS/MSS in EHP5 using Netweaver Business Client (NWBC).
    Since the ESS/MSS will be deployed in NWBC which is portal agnostic, I wonder if it is possible to deploy an access to the personnel development model in EHP4 from this platform? Or is it necessary to have a separate access to SAP Portal to enter in the Personnel Development Model?
    Can you help us regarding this issue?
    Thanks in advance for your help
    Best regards
    Joao Santos

    Hello Luke,
    Yes, I mean talent management. The appraisal forms are in the flexible template in SAP Portal.
    Thanks in advance for your help
    Best regards
    Joao

  • Personnel Development - IT0024 and IT0025

    Hi
    I Have a basic doubt about IT0024 - Qualifications and IT0025 - Appraisals in Personnel Development.
    We are currently implementing Basic Recruitment, PA, PD, OM, TEM and other submodules of HCM.
    My queries are
    1. After acitivation of swithces PLOGI-APPRA and PLOGI-QUALI, i see tabs in both IT0024 and IT0025 similar. Do we have to use both of them or just anyone of them would serve the purpose.
    2. Is IT0024 created for Recruitment module?
    Regards
    Srinivasa Naidu

    Hi Srinivasa,
    IT0024 and IT0025 are legacy infotypes.
    That is, before new personnel development module was introduced qualifications and appraisels were maintained in separate systems and consequently infotypes.
    Now, however, both qualifications and appraisals along with development plans, requirements, so on all are maintained via PPPM - Profiles. So they are both in the same system and now residing totally on PD side.
    They are not Personnel Administration infotypes anymore.
    However, as there may an old habit, and to provide a way to access profiles via PA20/30 transaction IT0024 and IT0025 screens still remain both directed to the employee profile (also accesses via PPPM)
    Hope its clear.
    Regards,
    Dilek

  • Blue Print- Personnel Development

    Hello Guys,
    I was looking if any one could forward me a sample blue print in Personnel Development.Thanks.-Ravi.
    My E-mail : [email protected]

    Check the link -
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAPD/PAPD.pdf
    Regards,
    Amit
    Reward all helpful replies.

  • MSS: Personnel Development

    Hi Guys,
    i'm having some doubts here. I have created a new FPM based view using webdynpro which extends the standard 'Personnel Development' application. When i deploy my new application, all works fine. I get the correct result. The problem is when i create the webdynpro iview for my application. Somehow or rather, i'm getting the error message below when i tried to 'preview' my webdynpro iview:-
    com.sap.pcuigp.xssfpm.java.FPMRuntimeException: No property defined with ID com.sap.xss.hr.eeprofile.photo.ImageClass.
         at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:111)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.getPropertyValue(FPMComponent.java:1024)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPMProxy.getPropertyValue(FPMComponent.java:1141)
         at com.sap.xss.hr.eeprofile.photo.vac.VPhotoComp.onInit(VPhotoComp.java:234)
         at com.sap.xss.hr.eeprofile.photo.vac.wdp.InternalVPhotoComp.onInit(InternalVPhotoComp.java:186)
         at com.sap.xss.hr.eeprofile.photo.vac.VPhotoCompInterface.onInit(VPhotoCompInterface.java:162)
         at com.sap.xss.hr.eeprofile.photo.vac.wdp.InternalVPhotoCompInterface.onInit(InternalVPhotoCompInterface.java:144)
         at com.sap.xss.hr.eeprofile.photo.vac.wdp.InternalVPhotoCompInterface$External.onInit
    can anyone shed some light here? Thanks

    Hi Srikanth,
    I've a custom webdynpro application based on FPM and would like to add Employee Search iview and my webdynpro iview to a page. Could you please give me the steps to go about it?
    What I have:
    Custom webdynpro application
    Custom FPM Application with one perspective and two FPM Views (a. Team Viewer b. Custom FPM View for my webdynpro applicaiton)
    Please answer this as well:
    For the base configuration ID of custom webdynpro app, which pcd path should I give? Is it the custom FPM application with two views in it OR path to the FPM application with a single view which is my webdynpro component
    Thanks,
    Rajit

Maybe you are looking for