Sap pi b2b add-on

Hello
We are currently planning on getting on SAP PI B2B ADD-ON. Currently we generate the EDI formatted file using file content conversion in the receiver file adapter. It is a very laborious task.
Does getting the B2B ADD-ON eliminate the file content conversion to produce the EDI file format ? Also how much time would cost would be saved if we got the b2b ADD-ON? Is there anyone who is doing file content conversion to generate the edi file format ? What are your thoughts?
Thanks!

Hi ,
Go through below link.
The SAP PI B2B add-on EDI capabilities unveiled
Regards
Venkat

Similar Messages

  • B2B add on for PGP encryption in SAP PI 7.11

    Hi Folks,
    I see that we can implement PGP encrytption in PI 7.11 SP08, Can anyone please provide me with the B2B add on install link from SAP market place which can enable SFTP adapter and PGP encryption.

    Hi Kalyan
    OSS note 1695521 provides the details of the download location. Below is a snippet of the note.
    You can download the PI secure connectivity add on 1.0 at http://service.sap.com/swdc > Installation and Upgrades > Browse our Download Catalog > SAP NetWeaver and complementary products > PI SFTP PGP ADDON > PI SFTP PGP ADDON 1.0
    You can download SP1,corresponding patches for SP0 and SP1 of PI secure connectivity add on 1.0 at http://service.sap.com/swdc > Support Package and Patches > Browse our Download Catalog > SAP NetWeaver and complementary products > PI SFTP PGP ADDON > PI SFTP PGP ADDON 1.0-->Choose the component Type
    Rgds
    Eng Swee

  • B2B add on issue

    Hi All , currently we hare installing single stack SAP PO .We are  running very  very late .
    As per client commitment we must install the B2B add on tool in decentralised engine . We are facing the following issue .
    Can not start
    com.sap.aii.adapter.ediseparator.app ( 622677 / 2014 )
    This is related to issue we are facing after the B2B addon support pack upgrade, I have updated the SAP
    message with the required information and waiting for SAP's response.
    We got an unofficial input from one of my friends in SAP that this feature is not possible in decentralised engine. I wish to know , has any one done it in decentralised engine , to be more precise , IS IT POSSIBLE ?
    Thanks and Regards,
    Arnab Mondal.

    Hi Arnab,
    Follow this thread: Error While Upgrading B2B AddOn to SP02
    Seems like they face a similar problem.
    Kind regards,
    Dimitri

  • Need information on how to integrate bank interfaces for 820,824 transaction using B2B add on

    HI All,
    Can anyone share some knowledge on how to integrate 820,824 transactions using PI B2B add on .
    I have downloaded B2B mapping kit and B2B toolkit into IR and uploaded SCA files into PI server.
    But I can not see any mappings provided for 820/824 by SAP in B2B mapping kit.
    Please share your comments.
    Regards,
    Dinesh

    Hi Dimitri,
    I am looking for 820,824 for ANSIX12 format.
    And i guess SAP has provided example mappings only for 810,830 and 850.
    I am unable to see the example mappings provided by sap for 820/824 in B2B mapping toolkit.
    Is there any way or place to find the example mappings for these formats?
    Regards,
    DInesh Male

  • Reg XML to Plain Conversion using B2B add on

    Hi All,
    This is an outbound scenario where the  message is sent to AS2 receiver channel and the output is Plain file. I have added all the module parameters
    and the content type as application/plain. While testing I am facing the error,
    Exception caught by adapter framework: XML-Parser error occured while parsing: Cannot initialize XML to plain handlerCan not find a matching configuration for sender party "", service , receiver party ,service , namespace , action  in table B2B_PLA_CTRL_IF.
    Can anyone help me on this issue.
    Cheers,
    Neethu

    Hi Neethu,
    Did you import the content? See How to install the new B2B add-on , see step 5.1
    You need to do this for the message type you want to exchange ((EDI, ansi X.12, ...).
    Also, please do step 5.2. I guess this is not the case.
    Kind regards,
    Dimitri

  • Classifier mapping to read Sender & Receiver  Identification Number from XML. How to handle in B2B Add on

    In current See burger tool, We have this functionality to read Sender and Receiver Identification number from the XML. Is there any way in b2b add on to do this.

    Hi,
    The classifier within the Seeburger context is being used to call your parent mapping, in case you want to dynamically determine your mapping, based on data in the UNB/UNH segment.
    Within the B2B add-on, there is no need to.
    Only use module localejbs/EdifactConverterModule in case you want to convert to or from EDI.
    You have a specific requirement or do you want to test something out?
    Kind regards,
    Dimitri

  • B2B add-on

    Hi,
    We all know that B2B scenario involves Party to Party  communication as the systems involved
    in message exchange are in different landscapes.We also checkbox for sender uses virtual receiver
    while creating receiver determination.
    We have one B2B scenario where (EDI to IDoc-XML)  parties are not  used.
    Does B2B add on eliminates the need for party to party comunication?
    Regards,
    Mayank Yadav

    Thanks All for Help,
    Actually in my scenario B2B add on was installed and Parties were not used.
    So I got confused why Party is nt used here since its a B2B.
    Now I got a clear idea about B2B addon- it converts EDI to  EDI-XML
    just like Seeburger BIC mapping Designer does for Seeburger AS2 adapter.
    Morever Party was not used here(in my B2B scenario where B2B add on was installed;business component is used instead of Business system) because 1 sender and 1 receiver system is there. 
    Party will be used only when we have multiple external sender/receiver systems across the landscape so that they can be identified with globally valid IDs.

  • In which tables sap does not add partitions to partitioned tablespaces

    Hi Team,
    I would like  to know in which tables sap does not add partitions to partitioned tablespaces in a BW 7.00 system on aix db2. any idea?
    DB2 version is 8.1.5
    Thanks,
    Asad
    Message was edited by: Asad S Zafer

    The documentation you quote says
    Local and global indexes associated with the range-partitioned table remain usable.When you added a partition, the indexes remained usable, just as it said they would:
    when checked for the status of the indexes, I can still see them as USABLE.so I'm not sure what the issue is.
    btw I'm not sure what you mean by
    creating a table and adding local and global partition using the ALTER CommandDid you mean the ALTER TABLE command? What are "local and global partitions" and how did you add them?

  • Microsoft Excel slowing down and other problems when SAP BPC EPM Add-in is installed

    Hello,
    Our client is having some problems with Microsoft Excel (MS Office 2013) since the SAP BPC EPM Add-in was installed in their computers.
    They are suffering from Microsoft Excel slowing down, even when not connected to SAP BPC (10.0 NW version).
    For example, when opening two or more excel archives, not connected to SAP BPC, Microsoft Excel crashes and is restarted with errors.
    Have you experienced something similar in other installations?
    Thank you very much, and kind regards,

    In relation to the previous post , we have to emphasize that we have installed in ours PC's:
    MS Office 2010  14.0.7116.5000  32 bit,
    EPM add-on version 10.0  SP20  (10.0.0.8993).
    and our customer have installed in theirs PC's:
    MS Office 2013 15.0.4675.1001 32-bit.
    EPM add-on version 10.0 SP19 patch 1 .NET 3.5 compilation 936.
    Thank you very much

  • Dynamic filename in receiver AS2 adapter in B2B Add-on

    Hello Experts,
    Can you please let me know how we can put dynamic filename in the receiver AS2 adapter for B2B Addon on SAP 7.4.
    Thanks
    Saurabh

    Hi Ryan / Experts,
    Let me explain you in more detail.
    In the receiver AS2 Communication channel, if I keep the Filename field as blank as shown below, then in the Mendelson inbox folder, a file is generated with the name "ASJAVA_DX5" which is my business component name.
    If I fill the filname field for example with "CONTRL", then in the Mendelson inbox folder, a file is generated with the name "CONTRL".
    This is my requirement because, suppose i trigger this interface "first time", a file with static name (ASJAVA_DX5/CONTRL ) would be generated in the inbox folder. If I trigger this interface "second time", since the file already exists with same name, it is not overwritten and I cannot check the output of 2nd trigger . Contents are not overwritten.
    To solve this problem + as a general requirement, I wish to have this name to be dynamic, atleast with date+timestamp.
    Can you please help.

  • SAP B1 2007 Add-On Removal Problem

    I am using SAP B1 2007 on Windows Vista.  I've been testing our Add-On module.  When running our installer, an error occurred, which left the Add-On in an unusable state, since the installation had not finished.  When I attempted to removed our Add-On, it does not go away.  It remains in the Company Add-On list, even after I select 'Remove Add-On' and perform the 'Update'.
    I am now stuck.  I have no way to remove our Add-On and no way to re-install it since B1 thinks it's already installed.
    Is there anyway out of this trap besides scrubbing my B1 install and starting over?
    Mark

    hello Mark,
    Try to see add/remove programs, to check whether the addon is still listed or exists there.
    Actually, you must restart SAP B1 client after remove the addon at the first time.
    Another solution is to restart license server and then remove the addon again. Do not remove addon from add/remove program.
    Rgds,

  • How to generate xml-file for SAP Fiori (UI add-on) with Solution Manager 7.0.1?

    Hello Guru,
    could you please help with my issue with Fiori Installation.
    We want to install SAP Fiori Front-End (GW+UI) on the Sandbox system with SAP Netweaver 7.3.1. (SP14)
    Gateway component (SAP GW CORE 200 SP10) was installed without any problems.
    But I need to install UI-add-on (NW UI Extensions v1.0) and when I try to install it via SAINT, transaction said me that I need to generate xml-file for it (as in General notes for UI add-on mentioned).
    But I have Solution Manager 7.0.1 and in MOPZ for this version I do not have option  "install Add-on" as it written in Guide for ui add-on installation.
    Could you please help me with advice how to generate xml-file for UI add-on installation on SolMan v.7.0.1?
    If where is no way, but only to upgrade Solution Manager, maybe somebody could give me xml-file for your system (for NW 731) and I will change it to my needs, I will be very grateful!
    Thanks in advance for any help!!!
    Bets regards,
    Natalia.

    Hello Guru,
    could you please help with my issue with Fiori Installation.
    We want to install SAP Fiori Front-End (GW+UI) on the Sandbox system with SAP Netweaver 7.3.1. (SP14)
    Gateway component (SAP GW CORE 200 SP10) was installed without any problems.
    But I need to install UI-add-on (NW UI Extensions v1.0) and when I try to install it via SAINT, transaction said me that I need to generate xml-file for it (as in General notes for UI add-on mentioned).
    But I have Solution Manager 7.0.1 and in MOPZ for this version I do not have option  "install Add-on" as it written in Guide for ui add-on installation.
    Could you please help me with advice how to generate xml-file for UI add-on installation on SolMan v.7.0.1?
    If where is no way, but only to upgrade Solution Manager, maybe somebody could give me xml-file for your system (for NW 731) and I will change it to my needs, I will be very grateful!
    Thanks in advance for any help!!!
    Bets regards,
    Natalia.

  • B2B Add on (Edi separator) IDOC AAE Receiver Error

    Hi
    We are getting an error, Transmitting the message to endpoint <local> using connection EDISeparator_http://sap.com/xi/XI/EDISeparator failed, due to: com.sap.engine.interfaces.messaging.api.exception.ConfigException: No sender agreement configured that matches the message's header fields (sender party: "xxxx", sender service: "", interface: "xxxx", receiver party: "", receiver service: "xxxx") when using IDOC_AAE Receiver adapter with ICO, scenarion works fine with standard IDOC adapter on integration engine
    We have 7.31 dual stack with B2B addon sp03
    We are using control records from mapping (reciver idoc adapter >advanced>control record in IDOC XML> all options selected)

    Hi,
    Yes, I filled the information on EDI separator channel, however this works fine with standard idco reciever adapter on integration engine, the issue is when I use ICO with Idoc_aae reciever adapter
    you mean to say I have to use (.*) filling all sender edispeartor channel information mandatorily
    what if I have to use the information to filter the message type from a multiple message type EDI file
    Again this works absolutely fine with idco adapter on IE

  • Can't start SAP after Java add-in installation

    Hi,
    We have migrated our BW 3.1C system to BI 7.0 (Win2003, Oracle 10.2, non-unicode). Everything was OK with the Abap system upgrade. Now we are making a BI Java installation over the BI 7.0 Abap system (Java add-in installation). We have made the first step, SCS instance installation and now the SAP BI 7.0 abap system doesn't startup.
    The workprocess fail to connect to Oracle and don't startup:
    M Fri Dec 07 22:47:00 2007
    M  calling db_connect ...
    C  dbs/ora/array_buf_size = 650000
    C  Prepending F:\usr\sap\BWK\SYS\exe\run to Path.
    C  Oracle Client Version: '10.2.0.1.0'
    C  *** ERROR => OCI-call 'OCIEnvCreate' failed: rc = -1
    [dboci.c      2159]
    C  *** ERROR => OCI-call 'OCIErrorGet' failed: rc = -2
    [dboci.c      1986]
    B  ***LOG BY2=> sql error -1     performing CON [dbsh#2 @ 1204] [dbsh    1204 ]
    B  ***LOG BY0=> Cannot get Oracle error text. [dbsh#2 @ 1204] [dbsh    1204 ]
    B  ***LOG BY2=> sql error -1     performing CON [dblink#3 @ 431] [dblink  0431 ]
    B  ***LOG BY0=> Cannot get Oracle error text. [dblink#3 @ 431] [dblink  0431 ]
    M  ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c   1411]
    M  in_ThErrHandle: 1
    M  *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   10169]
    Any idea about how to solve the problem?
    Thanks in advance!

    Hi,
    ORA_NLS33 is not set as environment variable. We uninstalled the J2EE so now everything should be non-unicode and SAP should startup but we continue with the same error.
    Some more info...
    DW log info when everything was ok:
    M  calling db_connect ...
    C  dbs/ora/array_buf_size = 650000
    C  CLIENT_ORACLE_HOME is not set as environment variable or
    C  DIR_CLIENT_ORAHOME is not set as profile parameter.
    C    assuming using instant client with unspecified location.
    C  Oracle Client Version: '10.2.0.1.0'
    C  Client NLS settings: AMERICAN_AMERICA.WE8DEC
    C  Logon as OPS$-user to get SAPBWT's password
    C  Connecting as /@BWK on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
    C  Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
    C    0 WE8DEC                                                    1   048D7FA8   0BD02454   0BD01CDC
    C  Attaching to DB Server BWK (con_hdl=0,svchp=0BD01C28,svrhp=0BD04A24)
    C  Starting user session (con_hdl=0,svchp=0BD01C28,srvhp=0BD04A24,usrhp=0BD25D68)
    C 
    C Thu Dec 06 18:00:20 2007
    C  Now '/@BWK' is connected (con_hdl 0, nls_hdl 0).
    Actual DW log with the errors:
    M  calling db_connect ...
    C  dbs/ora/array_buf_size = 650000
    C  CLIENT_ORACLE_HOME is not set as environment variable or
    C  DIR_CLIENT_ORAHOME is not set as profile parameter.
    C    assuming using instant client with unspecified location.
    C  Oracle Client Version: '10.2.0.1.0'
    C  *** ERROR => OCI-call 'OCIEnvCreate' failed: rc = -1
    [dboci.c      2159]
    C  *** ERROR => OCI-call 'OCIErrorGet' failed: rc = -2
    [dboci.c      1986]
    B  ***LOG BY2=> sql error -1     performing CON [dbsh#2 @ 1204] [dbsh    1204 ]
    B  ***LOG BY0=> Cannot get Oracle error text. [dbsh#2 @ 1204] [dbsh    1204 ]
    B  ***LOG BY2=> sql error -1     performing CON [dblink#3 @ 431] [dblink  0431 ]
    B  ***LOG BY0=> Cannot get Oracle error text. [dblink#3 @ 431] [dblink  0431 ]
    M  ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c   1411]
    M  in_ThErrHandle: 1
    M  *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   10169]
    There is no "C  Nls CharacterSet..." line, the problem must be something regarding NLS charactersets, non-unicode/unicode issues...
    But we don't know how to solve the problem.
    Any idea?
    Thanks again,
    Jon

  • B2B Add on -  Party configuration using B2B - AS2 Aadapter

    Can anyone help me  to configure Party using B2B AS2 Adapter .
    I tried configuring the channel using Party passing the Sender ID . Getting this error.
    Cannot get channel binding: com.sap.aii.af.service.cpa.CPAObjectNotFoundException: Couldn't retrieve binding for the given channelId: Binding:CID=67140c68525433f4a8468af588477d5e;

    Hi Mithali,
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/cdded790-0201-0010-6db8-beb9bb2b2660?QuickLink=index&…
    Under Sender Agency; put <your Business Service / System / Comm. Comp name>; example XID_112 or whatever
    Under Sender Schema; put ALE#KU; if your Partner type of Sender is KU in WE20
    This combination will derive the sender Party.
    Similarly you can put the receiver boxes if you want to de-normalise and derive the receive party name.
    Let me know if it helps; else can help you more!!
    Thanks
    Saurabh

Maybe you are looking for