SAP PI problem: User credentials are invalid or user is denied access

Hi!
I am about to configure SAP PI.
Therefore I have run post installation wizard step PI_00 and get the following errors:
Error: Not able to load Function SWF_XI_BPM_AUTO_CUSTOMIZE
(cause:Name or password is incorrect (repeat logon)).
Step: Execute SWF_XI_BPM_AUTO_CUSTOMIZE
Error: User credentials are invalid or user is denied access
Step: Add Installed Product2
Questions:
How can I identify which user/password makes problems here?
P.S.
My further problems are:
2) It is not possible to work with XI tools, such as:
Integration Directory, Integration Repository, Runtime Workbench
When I try to execute some action in these tools I get the following error:
Cannot connect to Repository
Error during communication with System Landscape Directory: User credentials are invalid or user is denied access.
2) When I try to access the NetWeaver configuration wizard (http://localhost:50000/nwa)
I get the followign warnig:
System Landscape Directory is not available
Only local systems can be maintened
Thank you very much
Thom

Hi,
Check the similar discussion  Error in PI postinstallation wizard
Wrong password PISUPER in PI_00 wizard
Thanks!
Edited by: Sudhir Tiwari on Nov 26, 2008 10:29 AM

Similar Messages

  • Administrator profile credentials are invalid

    Now I'm using the 10g version and the pointed document, now
    an error goes off on step 2 of 6 "Source System Information" (probably that
    is
    why i was having problems before).
    The error says "Administrator profile credentials are invalid" when I input
    tsbelcorp.tsnetglobal.com (the machine itself) and password xxxx.
    What could be the culprit?
    I will slowly recheck al pre-requisites and other steps
    Thanks in advance
    Kay

    Hi,
    I have the same problem as you. I use 10g migration tool, I want to migrate from exchange2k to ocs. I create an administrator profile, and when I start migration tool, and fill profile password (which is correct I`m sure of it), it gives me an error Administrator profile credentials are invalid.
    Did you resolv your problem, or still you have it?
    Could you help me if it is resolved?
    Thanks, Timea.

  • Error in Application log SCOM mgmt server 25934 Credentials are null for user

    Hi,   We recently started getting errors like the one shown below on one of our SCOM management servers.
    Any thoughts on what might be causing this and why this shows on a scom server.   There is no VMM stuff installed on this SCOM server.
    Thanks in advance.
    System
    Provider
    [ Name]
    Microsoft.SystemCenter.VirtualMachineManager.2012.Report.VMUsageCollection
    EventID
    25934
    [ Qualifiers]
    0
    Level
    2
    Task
    0
    Keywords
    0x80000000000000
    TimeCreated
    [ SystemTime]
    2014-01-28T18:08:24.000000000Z
    EventRecordID
    287618
    Channel
    Application
    Computer
    XXXX
    Security
    EventData
    Credentials are null for user:
    Thanks Lance

    Hi,
    If agent is installed on the VMM server, it will collect the information and send it to SCOM server. The event indicates the SCOM agent tried to access the registry key that was included in the User Profile but failed.
    Please specify a local account or domain account as the SCOM action account for a test.
    Niki Han
    TechNet Community Support

  • MDT user credentials error: Invalid credentials: The network path was not found

    I have DELL E5400 and DELL Optiplex 760 pc. In the before, DELL630 is working with my MDT service, but now, DELL E5400 and DELL Optiplex 760 not working with my MDT.
    When PE loaded and go to User Credentials interface, I input the user name and password(I confirm the user name and password is correct), it will display error message "Invalid credentials: The network path was not found". I checked that the network driver is correct.
    After search some information in the website, someone said that maybe the network initializing timeout issue, so I according to Tim Quan guide to add following to startnet.cmd
    wpeutil InitializeNetwork
    ping localhost
    wpeinit
    Then I update the deploy location in MDT and then re-loaded it again, but unlucky, I still meet the same issue. I tried to use ipconfig /all command to check the network status, I couldn't find out local network connection. I click "Cancel" to check the error message, it will display"A connection to the deployment share could not be made. The deployment will not proceed. DHCP lease was not obtained for any networking device!Possible cause: check physical connection".
    It seems that PE not loaded network driver successfully, but it is very strange that the network driver is correct.
    Have someone can help me?
    Thanks a lot

    Hi,
    Are you deploying Windows Vista 32bit or 64bit? Please obtain he latest network card drivers from the following sites:
    Dell Latitude E5400:
    http://support.dell.com/support/downloads/driverslist.aspx?c=us&cs=19&l=en&s=dhs&ServiceTag=&SystemID=LAT_E5400&os=WLH&osl=en&catid=&impid=
    Dell OptiPlex 760:
    http://support.dell.com/support/downloads/driverslist.aspx?c=us&cs=19&l=en&s=dhs&ServiceTag=&SystemID=PLX_760&os=WLH&osl=en&catid=&impid=
    Please make sure you add the correct network driver to deployment point.
    Additional Information:
    http://www.techtalkz.com/windows-deployment/501217-deployment-share-connection-issue-since-mdt-2008-waik-1-1-a.html
    http://www.deploymentforum.com/Community/Forums/tabid/124/forumid/16/postid/737/view/topic/Default.aspx
    Hope it helps.
    Tim Quan - MSFT

  • Windows XP SP3 cached domain user credentials are not updating after password change over VPN

    We have a bunch of sales people who stay on the road indefinitely, using Windows XP SP3 domain joined laptops.  
    When they change their domain user password, while connected through the VPN, the cached credentials are not updating locally on their laptops.  This causes issues at their next Windows login, where they have to use their prior password to gain access
    to the OS.  Then when they connect through the VPN client, they have to use their new password.  We have already tried Microsoft KB 829652 (which was rolled up with SP3 anyways).
    I have found several work arounds, but I would like to attack the root cause.

    You have to recache the credentials if you change the password. You may have to get the user to log in locally. Then connect to VPN. Once connected to vpn, have them do a run as on any program...I usually use notepad or internet explorer (this will
    cache their credentials with the updated password.).

  • How the user credentials are transported using BusinessObjects SDK

    Hi, I would like to know in detail how the user credentials is passed with the java call (logon). Are they encrypted during the transport? Which mechanism (protocol, technology) does the sdk use to provide security for the user credentials?
    Thanks

    The BusinessObjects Enterprise SDK communicates with BusinessObjects Enterprise servers using a proprietary CORBA framework via TCP/IP. 
    This is so inter-server and server-client communication can be done transparently from the perspective of the API whether all services are on one or multiple machines.
    You can configure BusinessObjects Enterprise services to use SSL through this communication.  How you would do so is described in the Admin Guide.
    You'd configure the SDK as you would the servers in as described in the Admin Guide.
    For the BusinessObjects Enterprise Java SDK, that means specifying the four Java System Properties (as you would for Java InfoView) to point to the SSL configuration files.
    That takes care of the connection from the SDK to Enterprise.
    Set-up of secure communication from web browser to web app using the SDK is a separate matter.
    By the way, the BusinessObjects Enterprise SDK is fully tested an supported only when used in a web application.  Desktop and standalone apps using the Enterprise SDK are untested.
    Sincerely,
    Ted Ueda

  • How the user credentials are transported using OBIEE webservice

    Hi, we're trying to using the OBIEE web service api to interface with OBIEE, and would like to know in detail how the user credentials being passed with the web services request?. Which mechanism (protocol, technology) do this WebService use to provide security for the user credentials?
    Thanks.

    The Oracle BI Web Services API is a SOAP-based API therefore all the information is sent via HTTP requests containing XML messages. By default OBIEE will run the Presentation Services Web App server in non-secure mode. Therefore all the user credentials will be basically sent in clear text and will be subject to "a man in the middle" attack. It is possible to setup the Presentation Services to run in securely using HTTPS but I am unsure if the API will work over HTTPS.

  • LDAP users that are not Windows users

    Hello,
    I would like to use Active Directory as a directory service for internal intranet sites, etc.
    I have users that do not need access to a Windows desktop as they are connecting to the sites via kiosk/mobile devices.
    Can I set up a user that can be validated through LDAP but would not be able to access a Windows desktop through the normal Windows logon screen ?
    Chris.

    Hi Chris,
    If you want to restrict some users in Active Directory can only logon through mobiles/devices rather than computers, you can configure
    Deny log on locally and Deny log on through Terminal Services through Group Policy.
    More information for you:
    User Rights
    http://technet.microsoft.com/en-us/library/dd349804(v=WS.10).aspx
    Best Regards,
    Amy

  • Propagating user credentials to Web Services in WebLogic 6.1

    Hi All,
    Does anybody provide me some information about propagating client
    credentials to the Web Service. Agree with documentation I have tried as in
    code below, but it doesn't work. On a server i still have a guest user.
    Thanks in advance for any help.
    Properties h = new Properties();
    h.put(Context.INITIAL_CONTEXT_FACTORY,
    "weblogic.soap.http.SoapInitialContextFactory");
    h.put("weblogic.soap.wsdl.interface",
    RaServices.class.getName() );
    h.put(Context.SECURITY_AUTHENTICATION,"simple");
    h.put(Context.SECURITY_PRINCIPAL,"user");
    h.put(Context.SECURITY_CREDENTIALS,"password");
    Context context = new InitialContext(h);

    Hi Jerzy,
    Were you actually able to achieve what you wanted? I'm not exactly sure, because
    you said "it began to work", but you also said I "wasted much of your time". If
    you still are not satisfied, I'm sure the folks in our tech support area can help
    you.
    Regards,
    Mike Wooten
    "Jerzy Nawrot" <[email protected]> wrote:
    Hi Mike,
    Thank you for comprehensive explanation how to resolve my problem. I
    have
    done all work exactly
    as you wrote and then it began to work, both for static and dynamic
    client.
    As is written in WebLogic documentation
    I only restricted access to the stateless session bean that implements
    my
    Web Service, not the SOAP servlet.
    It seams that in this case user credentials are not propagated from servlet
    to ejb.
    Thanks once again you wasted much time for me.
    Regards ,
    Jerzy Nawrot
    "Michael Wooten" <[email protected]> wrote in message
    news:[email protected]...
    Hi Jerzy,
    This does indeed work, because I just verified it. Let's go througheverything
    to make sure you have all the pieces.
    1. You need client code that looks something like
    proxy.setUserName(userName);
    proxy.setPassword(password);
    where "userName" has been assigned the value of the user and "password"is
    a clear-text
    representation of their password.
    2. You need to use the Admin console to add the user to the system.I add
    mlwooten
    as a user, and employees as a group. Then I put mlwooten in the employeesgroup.
    3. The web.xml file for your web service should contain lines similarto
    this:
    <security-constraint>
    <web-resource-collection>
    <web-resource-name>PhoneBookService</web-resource-name>
    <url-pattern>/examples/webservices/security/PhoneBookService</url-pattern>
    </web-resource-collection>
    <auth-constraint>
    <role-name>AuthorizedUsers</role-name>
    </auth-constraint>
    <user-data-constraint>
    <transport-guarantee>NONE</transport-guarantee>
    </user-data-constraint>
    </security-constraint>
    <login-config>
    <auth-method>BASIC</auth-method>
    </login-config>
    <security-role>
    <role-name>AuthorizedUsers</role-name>
    </security-role>
    4. The weblogic.xml for your web service should look something like:
    <weblogic-web-app>
    <security-role-assignment>
    <role-name>AuthorizedUsers</role-name>
    <principal-name>employees</principal-name>
    </security-role-assignment>
    <reference-descriptor>
    <ejb-reference-description>
    <ejb-ref-name>examples.webservices.security.PhoneBookService</ejb-ref-name>
    <jndi-name>examples.webservices.security.PhoneBookService</jndi-name>
    </ejb-reference-description>
    </reference-descriptor>
    </weblogic-web-app>
    6. That's all I did to get it to work.
    NOTE: wsgen does not add the stuff in 4 and 5, above. You must addit
    manually.
    Regards,
    Mike Wooten
    "Jerzy Nawrot" <[email protected]> wrote:
    Hi Michael,
    Thanks for your advice.
    The way you have proposed I've tested earlier and unfortunately this
    method
    does'nt work properly too.
    It seams that session bean used as a Web Service knows nothing about
    user
    credentials passed from a client aplication.
    Maybe, there is a bug in servlet
    weblogic.soap.server.servlet.StatelessBeanAdapter wchich does'nt
    propagate
    credentials to a session bean implementing a Web Service, or some
    configuration tasks are required on the WebLogic Web Server Components
    Jerzy Nawrot
    "Michael Wooten" <[email protected]> wrote in message
    news:[email protected]...
    Hi Jerzy,
    You must do this through the WebServiceProxy object. The methods
    you
    want
    are:
    setUserName(String userName);
    setPassword(String password);
    The internals of WebServiceProxy will Base64 encode the password
    before
    it
    invokes
    the target web service.
    Regards,
    Mike Wooten
    "Jerzy Nawrot" <[email protected]> wrote:
    Hi All,
    Does anybody provide me some information about propagating client
    credentials to the Web Service. Agree with documentation I have
    tried
    as in
    code below, but it doesn't work. On a server i still have a guestuser.
    Thanks in advance for any help.
    Properties h = new Properties();
    h.put(Context.INITIAL_CONTEXT_FACTORY,
    "weblogic.soap.http.SoapInitialContextFactory");
    h.put("weblogic.soap.wsdl.interface",
    RaServices.class.getName() );
    h.put(Context.SECURITY_AUTHENTICATION,"simple");
    h.put(Context.SECURITY_PRINCIPAL,"user");
    h.put(Context.SECURITY_CREDENTIALS,"password");
    Context context = new InitialContext(h);

  • RC0: RS Installation Problem - The credentials you provided for Reporting Services service are invalid. To continue ...

    Hi
    When installing 2008 RC0 I get the following error message:
    "The credentials you provided for Reporting Services service are invalid. To continue, provide a valid account and password for the Reporting Services service.
    Error code: 0x84B40000"
    During the installation process it never prompted for the credentials to be used for the Reporting Services service (i.e. the Reporting Services service did not appear under the "Service Accounts" tab during the Server Configuration stage of the installation. The other services did appear). In the "Ready to Install" stage the Account under Reporting Services, Service Configuration is given as "udefined". Everything else installed without a problem.
    Any help would be appreciated.
    Thanks.
    Egmont

    I had a same and similar issue.
    I finish the installation by providing SQL Agnt and SQL Service by NT AUTHORITY\NETWORK SERVICE and blank password. Once complete the installation I changed the Service Account by services.msc to SQL SA account.
    Reason: Service account is not granted for Log on as Service.
    Solution: Grant the SA to Log on as Service.
    Abu
    Bad Idea When you first install Microsoft SQL Server to run under a Microsoft Windows NT account, SQL Server sets for that Windows NT account various Windows user rights and permissions on certain files, folders, and registry keys. If you later change the startup
    account for SQL Server (the MSSQLServer service) and the SQL Server Agent service by using SQL Server Enterprise Manager (SEM) or SQL Server Configuration Manager (SSCM), SEM automatically assigns all the required permissions and Windows user rights to the
    new startup account for you so that you do not have to do anything else. We recommend that you use this is the approach to change the service account.
    http://support.microsoft.com/kb/283811

  • SOAP SAP user credentials

    Hi
    we have an INBOUND SAP PROXY in PI 7.11 calling our SAP BACKEND. We want our partner to call this ws in PI. What user credentials must the user in PI have in order to complete the SOAP call?
    thx in advance
    Cheers
    Edited by: bohamo on Dec 13, 2010 3:21 PM

    HI,
        Your question is not fully clear. Looks like you are planning to do Soap to proxy i.e  webservice to proxy.
    To provide end users to access your web service, you can go with many options.
    a) User credentials login and password.  Talk to basis to create one user for accessing the web service. Something very similar to end user profile.
    b) certificate authentication.  We can generate a certificate and maintain in the Netweaver side. Provide that information to the client.
    To know more about user credentials or certificate authentication please use the below link.
    http://help.sap.com/saphelp_nwpi711/helpdata/en/48/3555240bea31c3e10000000a42189d/content.htm
    Thanks
    Baskar

  • Can I validate input parameters and throw a message to user that parameters are invalid?

    Post Author: ak004
    CA Forum: General
    Hi,
    I have a report that accepts input parameters. Can I do a front end validation for these parameters and throw a message to the user that the parameters are invalid? Will this work fin if I deply it in infoview?
    Thanks

    I think I posted this on the wrong forum, I will repost this in the proper forum

  • User Forms are not displaying in SAP B1 2005

    Hi,
    I have created an application using SAP B1 2004. All user forms are displaying properly in SAP B1 2004. But when I am trying to run the same application in SAP B1 2005, It is unable to display some of the User Forms.
    Can any body help me for the same?
    Thanks.
    Archana.

    Hi Archana,
    Are you using some special items in your form?
    You say the form is not displayed, do you have a return error or exception when trying to open it in debug mode?
    In Debug mode please pay attention to the VS.NET configuration, you have in Debug Menu -> Exceptions to configure all types of exception to throw into the debugger. Sometimes the COM exception are not thrown and your code just jumps after the error to the end of your method...
    Have you tried to open the xml of your form with the ScreenPainter to see if everything is correct in there?
    Hope it helps
    Trinidad.

  • Problems loading user business areas

    Hi,
    I connect ok with a user/password to the desktop edition, but the list box with the business areas are empty. I already grant access rights to three business areas in the administration edition.
    But the same operation in another PC works fine. Connects well and later shows the three business areas.
    It's a local problem inside this right PC. From this PC, the connection with the administrator user shows me all the BAs.
    May be a bug? What's happen?
    Thanks.

    trananhdung wrote:
    Yes, I have a problem loading BlackBerry User Tools CD on Vista Operating System!
    Hi and Welcome to the Forums!
    Well, "a problem"...perhaps you could be a little less vague so that we don't have to guess? Perhaps you could scroll up through this thread, read all the posts, try the solutions already provided, and let us know exactly what is going on. That way, we can avoid guessing.
    Thanks!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • AppleTV MLB.TV Invalid User Credentials Question

    I am trying to log in to my mlb.tv account on appleTV and I'm getting an Invalid User Credentials message with a "identification error on identity point of type fingerprint" submessage.
    I went to the support forums on mlb.com and the moderator there was of no help and told me to go to apple.  Does anyone here know what "identification error on identity point of type fingerprint" means?
    My software is up to date (5.2) and I also have not had any issues logging in on my iPhone or iPad.

    I was able to resolve this by going to Settings > General > Reset > Reset All Settings
    I had to log back in to all my services, which was a bit of a pain, but MLB is working again.  Go Rockies.

Maybe you are looking for

  • Does anyone know why the Filter Gallery is not appearing in Photoshop CC since I updated to Creative Cloud 2014

    Hi. I am not an experienced user of Photoshop however I have always been able to access the Filter Gallery to add filters to my images. Today I went in to PS CC to work on an image and found the Filter Gallery selection greyed out - so you can't clic

  • Still msg tone Error exists in ios 5.1.1

    i have noticed aftr more thn around 8 to 10 days of extensive use, the msg tone gets kinda repeat itself in a line thrice for just one message.. thn the only thing which helps is a restart.. hav anybody knows about this error ??? "fyi : i do know how

  • Mandatory UDF for A/P Invoice

    Hi Experts, I have created a UDF U_BillNo in the header lever of marketing documents and kept it as a mandatory field. We need to enter the bill no for A/P Invoices at the time of posting. What i want is the person cannot post the invoice untill the

  • RMI Exceptions

    Hello, I am new to java RMI, I have written a simple program, I can run Server without problems, but when I try to run Client I get these exceptions: Exception in thread "main" java.security.AccessControlException: access denied (java.net.SocketPermi

  • How to show time as well as date in Finder for file Date Modified

    Completely mystified... Folder is only showing the mm/dd/yy modified for any file not modified Today (which then says Today and the time). Why on Earth would the Date AND TIME not show for all files? I can't seem to find any option to do this. Defini