SAP PM : Unprocessed future change recs for order number : Error Message 688

Dear Experts
I received the following message when trying to close a PM order.
Unprocessed future change recs for order number  prevent del. flag/c -  Error Message 688
Kindly advise on the steps to be taken to resolve the above error.
Thanking you in advance for your assistance.
Regards
Barry

Hi Barry,
Please find below thread for your reference.
Error message when business completion of a production maintenance order
Unprocessed future change recs for order prevent del. flag/completion
Regards
Terence

Similar Messages

  • Error as unprocessed future change recs for orde in CO02

    Hi,
    I am getting error as below while activating the Set deletion indicator for one of the production order,
    unprocessed future change recs for order u2013 XXXXXXXX prevent del.flag/completion in CO02
    Please note that presently my production order status is * TECO CNF  DLV  PRC  GMPS MACM SETC VCAL*
    I also observe in COGI for the related production order there is an error saying that * In plant XXXX, post to current period 2011 /05* with 261 movement type.
    Please let me know whether if I clear the COGI error I can able to set the deletion indicator successfully or is there any other action is required from my side .Now I have a problem with this production order because the relevant sale order my customer is trying to activate the reason for rejection.
    BR / Kumar.S

    Chetan,
    Which date you are refering it is a document date or posting date?PLease let me know to proceed further.
    BR / Kumar.S

  • Msg #C0688 Unprocessed future change recs

    I am receiving this error when attempting to Complete (business) on a maintenance order.  The log inidicates there are still future change records or error records to be processed.  Where do I find what these are?
    Thanks,
    Julie

    Hi,
    Can be due to errors from goods movements or cost postings as mentioned above.
    Also frequently arises because information from time confirmations are waiting for transfer to HR. A customizing setting (OIOR) causes these records to be created even when this data is not required by HR. See note [712007|https://service.sap.com/sap/support/notes/712007] that explains further and how to resolve the situation.
    -Paul
    Moving to [Enterprise Asset Management (EAM)|Enterprise Asset Management (SAP EAM); forum

  • CORM --- There is still WIP for order u201Cu2013 error

    Dear SAP Experts
    When doing CORM (close process order), the error message u201CThere is still WIP for order u201Cu2013 WIP in financial accounting is still to be cleared.
    For this process order, the WIP is calculated in period 11 2009,The order was final confirmed and final settlement to COPA was done on feb 2010, So we tried to reverse the settlement , the settlement on feb 2010 is getting reversed ,but the WIP in period is not reversing in KO88
    How to reverse the WIP posted in period 11 2009 ,now the period is closed for year 2009. now the order status was in CNF . Please suggest  a solution for this .
    Thaanks
    Partha

    HI,
    WIP-posting for a given period is reversed when the settlement for this period is reversed.
    As this is in an already closed fiscal year there is no way to do so as this will change accounting figures for closed fiscal years.
    What causes the "WIP is not zero for order..." message? This needs to be solved and I doubt that the reversal of the old WIP settlement will help you on this.
    Best regards, Christian

  • I purchased a Student/Teacher addition 2 days ago and still cannot download for order number AD004080514EDAU. It is supposed to be 24 hours but there is still no progress

    I purchased a Student/Teacher addition 2 days ago and still cannot download for order number AD004080514EDAU.
    Adobe promised 24 hours - now 36 so what's happening

    Alicemarie if you are facing difficulties with your order then please contact our support team directly at Contact Customer Care.
    Did you utilize your e-mail address associated with your education organization when making your order?

  • Error in background job for program RSGET_SMSY error message No active job

    Hello!
    I would like to set up the Change Request Management functionality in SAP Solution Manager.
    The only red warning by executing Test-button in Tcode “SOLAR_ADMIN_PROJECT” is:
    <b>Error in background job for program RSGET_SMSY error message No active job found</b>
    Can someone please tell me how to solve this problem?
    (tcodes, technical steps)
    Thank you very much!
    regards
    Thom

    Thank you very much!
    Can you also help me with the warning "Errors occurred during synchronization of the system landscape" in tcode SOLAR_PROJECT_ADMIN" --> System landscape --> Change requests --> "Refresh"?
    The second issue I cannot see any projects in Tcode "/TMWFLOW/CMSCONF"
    according to the SPRO-step "Set Project Assignment of Requests as Mandatory"
    Thank you!
    regards

  • PO order number error in Sales order

    Hai Everybody,
    I have a problem of PO order number error in the sales order.
    While creating Sales order, i am entering the PO order number in SO.
    Though the document is complete, i am getting this error message : "ordering errors; tested ORGID: 7147144007" and unable to proceed further (saving order & delivery).
    Please give me some inputs to solve the issue.
    Thanks in advance
    Jaya

    Thanks for your inputs.
    @Ram : i have created the same senaerio in Quality system though manual entries still i am facing the same problem i dont know how they have created in Production system, how to find out please tell me.
    @Raghu.k : i have checked in VOV8 ( check po number is set blank which means no check ), still i am facing the problem.
    Please suggest further to solve the issue.
    Thanks
    Jaya

  • How to keep the field open for input with error message in report program

    Hi,
      Need a help in solving the below issue.
    "How to keep the field open for input with error message in report program"
    Regards,
    C.Shasiraj.

    Hi...
    you have to use the event:
    <b>AT SELECTION-SCREEN ON <FIELD> EVENT.</b>
    u have to give an error message in this event.
    Consider the following <b>Example:</b>
    <b>PARAMETERS : NUMBER TYPE I.
    AT SELECTION-SCREEN ON NUMBER.
      IF NUMBER = 10.
        MESSAGE 'Number vakue is 10' TYPE 'E'.
      ENDIF.
    START-OF-SELECTION.
      WRITE NUMBER.
    </b>
    in this if u give the value of number = 10, it will not proceed further, if u give some other value other than 10 you will proceed further...
    Execute this program once u will understand....
    also Consider the following links :
    <b>Regarding events:</b>
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/79/34a237d9b511d1950e0000e8353423/frameset.htm
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/79/34a23ad9b511d1950e0000e8353423/frameset.htm
    <b>Regarding messages:</b>
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/c5/aa575426ad11d2954d0000e8353423/frameset.htm
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/c5/aa575426ad11d2954d0000e8353423/frameset.htm
    This is very useful.......
    Reward points if useful....
    Suresh....

  • Call of API for IBase contains errors Message no. CRM_IB050

    Call of API for IBase contains errors
    Message no. CRM_IB050
    Diagnosis
    No import data was entered for one of the function modules (APIs) for Installed Base Management. Therefore, the function cannot be executed.
    System Response
    The system terminates processing.
    Procedure
    If the APIs are called in customer-specific programs, check the call for the APIs and change the call accordingly.
    Can anyone help me in the above issue.
    Regards,
    Mirza Kaleemulla Baig

    Hi Sai,
    This is too late to reply this post, but to let everyone know about the issue I am posting here.
    Start new UI session and put breakpoint at BUPR_EMPLO_DELETE and check parameter IV_X_SAVE everytime, till you get the error message. The parameter IV_X_SAVE should be same/consistent (either ' ' or 'X') in whole Logical Unit of Work. It should not change in between.
    I faced the same kind of problem and found that standard was passing IV_X_SAVE = ' ' and in our custom code we were passing IV_X_SAVE = 'X'. I changed it to IV_X_SAVE = ' ' and my problem got resolved.
    You can try the same. Please post the alternate solution if you find it.
    Best Regards,
    Rahul Koshti

  • Insufficient data for an image error message

    Insufficient data for an image error message on latest version of adobe reader

    Change the zoom settings so you can see the contents of the document. Try reducing the Zoom factor, or click Fit One Full Page To Window. You can make this setting persistent (to avoid changing for every document) in Edit > Preferences > Page Display > Zoom > Fit Page.
    Resave the PDF in Acrobat (you can download trial from http://www.adobe.com/cfusion/tdrc/index.cfm?product=acrobat_pro&loc=us ) as an Optimized PDF, using the Standard PDF Optimizer settings, or as a Reduced File Size PDF.

  • While preparing an AUDIT - (Data changes report) faces an 'Server error' message

    Hi BPC Experts,
    While preparing an AUDIT report- (Data changes report) faces an 'Server error' message.
    But regular users are able to input their data in EPM.
    What could be the reason for this message?
    Regards,
    Rajesh.

    Hi Chuan,
    Attached the Error message here. We use BPC NW10
    Rajesh.

  • I could not install the upgrade for iTunes and Error message said "can't start because MSVCR80.dll is missing" Reinstallling has not helped. Is it Apple's fault?

    I could not install the upgrade for iTunes and Error Message said " Can't start because MSVCR80.dll is missing". Reinstalling has NOT helped. . Is the fault with the Apple iTunes upgrade?

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.

  • How to create a help view for a customized error message

    Hi all,
    Can you guide me how to create a help view for a customized error message, we need to put some suggestions in it so that user can can resolve this issue with this guide. ( the short text is too short to describe all situations via TC:SE91)
    Thanks very much!
    Bruce, Wen

    Hi Bruce,
    Could you brief your concerns again.
    Why don't you maintain long text in message class for long description.
    Regards,
    Ranjith N

  • When downloading the new 10.7 update for itunes, an error message saying that there is an error writing to file, verify that you have access to this file comes up... what is this??

    When downloading the new 10.7 update for itunes, an error message saying that there is an error writing to file, verify that you have access to this file comes up... what is this??

    That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
    XP instructions in the following document: How to perform disk error checking in Windows XP
    Vista instructions in the following document: Check your hard disk for errors
    Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

  • "You do not have enough access privileges for this operation" error message on iTunes startup?

    So I cleaned up my Macbook recently, and now I am fearing that I may have deleted something important.
    Whenever I start up iTunes, I am met with the "You do not have enough access privileges for this operation" error message. I have read forums that advised editing the Get Info page for the iTunes library to allow all users and staff to "Read/Write", but doing this has not eliminated this message.
    Any tracks that were not purchased play normally, but purchased tracks now require additional sign-in that I do not believe was required before. Other than this, iTunes performs normally.
    Did I mess something up permanentliy or is there a way to fix this?

    The problem was that my account wasn't authorized. But when I tried to authorize it, I got an error message saying that the authorization could not be completed. Thankfully, THAT was something that Apple Support had previously addressed.
    See http://support.apple.com/kb/ts1277
    Thanks, Apple.

Maybe you are looking for

  • Battery heating and dying rapidly

    My bb curve 8520 is about a year old.  3 days ago i noticed the battery went from 100% to 0% in a span of some minutes.  i recharged the battery and noticed it kept doing the same thing.  I then replaced the battery thinking it had run its course but

  • I accidently deleted half my music in itunes (600  songs) - and yes, emptied the trash.  It's all on my ipod touch...ANY way to get them back??!!

    HELP!  I bought a new Mac (my first) and used my nano as an external hard drive to transfer my itunes library from my old PC to the new Mac, then re-synced the nano.  However, something happened when I transferred because it duplicated every song.  S

  • Power map- Cannot initialize DirectX

    I am running windows 7 in a VM with MS office 2013. I have installed power map for excel 2013. When I try to launch power map in excel it gives this error "Cannot initialize DirectX. Confirm that you hardware supports DirectX 10 or later and that you

  • Flash 8 vs. Flash 7

    Hello, I just completed a nice little project making use of the FLVPlayback features of Flash 8. I imported video files and encoded them to .flv files and stream them from a server. Works great. However, I just learned that some of my customers run L

  • QST:: How do I embed flash into a hosting C++ app??

    hi there i want to write a windows app that embeds flash. the app will be written in c++ (visual c++), and there needs to be communication (two-way) between the c++ app and the flash movie. is this possible, and how do i do it? does it involve using