SAP report for movement type and material type

Hi!
I would like to use a standard SAP report to give me a list of all the movement types (much like MB51) but instead of material I would like to select on Material type e.g. ROH. The result should for example be a list of the movement types 501 on material type ROH.
It is urgent, if you could help me I would be very greatful!
Sincerely
Anders Öhrling

Thanks for your answer!
I have managed to join the two tables and created a report that will work, except that the amounts in local currency that is given by movement type 201 is not negative (as in MB51). I need all movement types that generate a debit must be shown as a negative value. Wo when I summarize all the movement types I end up with the value of 101 minus 201.
Is that possible without ABAP programming?
Sincerely Anders Öhrling

Similar Messages

Report to transport vendors for a plant and material type

Hi Guys ..
Is there any report fwhere is can download all the vendors for a particular Plant and type of material.
Thanks for your support

Hello Vivek,
I have checked these tables but my issue is to get the list of Material numbers in the table along with a field for Class type.
So this does not happen in these tables.
However thank you for the tables given
Regards
Mahesh

Not getting the Link between GEIL and material type: procured material not

Hi Friends,
Some material corresponding to certain G/L Account numbers are not appearing. From Fagll03 I can check the G/L Account number, but how shall be able to get the corresponding table field which holds the material or to check whether that G/L Account number has been properly linked to the material.
Please suggest what to do. Is this a problem of programming ? or ...
Thanks,
Saheli

Hi Saheli,
Link b/n GL accounts and Material is in this way.
Material is created based on material type and material type is connected to Valuation class via Account category reference.
Now that for each valuation class corresponding GL accounts are defined in customizing.
you can check the same in Tcode# OBYC.
To check the posting to Inventory account during GR, select BSX (Inventory posting) and check whether the corresponding valuation class has got the assignment with GL accounts or not.
Hope this help you out.
BR,
Krishna

Standard SAP report for variance analysis of SD and MM

Dear All,
I want the standard SAP report for the vendors and customer varaiance analysis for the posting done in MM and SD with the GL balance in FI .It should be same as the report we get from the transaction code MB5L.
Thanks in advance
Meruta

HI,
The 1AB library contains reports for variance analyses. This is an important report for Cost Center Accounting (CO-OM-CCA) supplied in the SAP R/3 System. Additional information for report can be found in the documentation for the reports. Choose Extras->Documentation from the report itself.
Hope I had been able to help you out. Please assign points.
Rgds
Manish

Issue to make mandatory field(SELD/BBD and Date of manufactor)in migo for particular Material type and material Number starting with'1' series.

Hi friend,
i have issue regarding mandatory self life field (SELD/BBD and Date of manufactor)in migo for Batch Tab for particular Material start with '1' Series and material type.
i want to make mandatory above field during GR from migo..any one let me know exit or badi for that to full fill this goal..
Regard's,
shaikh Khalid.

Hi Shaikh
First of all Thread is not closed seconldy as a good practice if you have resolved your issue kindly document it here so that it may help someone in future
Nabheet

How to get classification for a given material and material type in MM

Hello Friends,
One of my developer colleagues is struggling to find out : how to get classification for a given material and material type in MM?
He is looking for probable table and table fields to Select from.
I would appreciate seriously any help in this regard.
~Yours Sincerely

Hi
Below given the flow and table details for a given class and class type.
- Table KLAH --> This contains the "Internal class no" [ for the given Class & Class type ]
- Table KSML --> This contains the " internal character numbers " [ nothing but characteristics attached to the class ] , which can be fetched with the above fetched internal class no
- Table AUSP --> This table contains the objects ( material ) attached to the internal characters of that class
- Table CABNT --> This table contains the "Description" for the internal character numbers.
- award points if this is ok

How to keep Industry sector and Material Type in Display for Tcode MM01

How to keep Industry sector and Material Type in Display for Tcode MM01( create material Initial screen)
Thanks,

Hi
Yes, your requirement is possible using screen variant
1. use tcode SHD0
2. give transaction as MM01
3. goto screen variant tab - assign some name - enter program name and screen name
(from mm01 - F1 help)
4. goto transaction variant tab - assign some name - assign already defined screen variant name
5. goto standad variant tab - transaction variant name already fetched automatically - click on active button (it was placed after transaction variant name
Raju

BAPIs for populating Industry Sector and Material Type dropdowns

Hi all,
I have a requirement to create WebDynpro appliation,
which is the replica of MM01 Transaction page.
In the first page i want to populate Industry sector
values and Material Type values in 2 dropdowns.
Can anyone please tell me what are the BAPIs i need to
call and how to find the required BAPIs?
Thanks

You can use the function module RFC_READ_TABLE. The tables that you need to read are T137 for industry sector and T134 for material type.
Regards,
Rich Heilman

Filtering R/3 Material Groups and Material Types

Hi,
I am trying to filter the Material groups and material types during master data upload from R/3 to SRM 4.0
I am tried doing the following:
1. In Txn R2AR2, i set up the request for DNL_CUST_PROD1 for MARA-MATKL(Material Group) & MARA-MTART(Material Type)and then run the Txn R3AR4 with DNL_CUST_PROD1. The replication was successful, but it pulled in all the R/3 backend material groups and material types.
Now i deleted the replicated material types and Material groups in SRM using SRM Std reports and this too was successful.
2. Now i tried another method - In Txn R3AC3, i selected the Object DNL_CUST_PROD1 and i added table MARA and set up the filter requirements for MARA-MTART(Material Types) and MARA-MATKL(Material Groups), i synchronized the filters and then when i selected the object DNL_CUST_PROD1 in Txn R3AS for initial upload, even this is pulling in all the material types and material groups from R/3 without filtering
Can anyone please let me know the exact procedure to filter out the R/3 Material types and material groups during initial upload of this data into SRM 4.0
Thanks

Hi,
Before starting the INitial load for MATERIAL,for filetr settings ,Go in tcode R3AC1.
There select the Object name as MATERIAL and click on the "filter settings" tab.
There in OBJECT FILTER SETTINGS
Enter the relevant filter criteria:
e.g. If you wnat to filter on Material type(MARA-MTART):
The input will be as follows:
Table /Structure :MARA
Field :MTART
OP :EQ Equality (= Low)
Low: "Material type name"
Incl/EXcl: Inclusive defined
And then click on the button "FILTER SYNC".
The filter settings are complete for the Material download.
HTH,
BR,
Disha.
Pls reward points for helpful answers.

Combination of plant SUNP and material type finished product does not exist

HI i am suneel
my issue is combination of plant SUNP and material type finished product does not exist when i posting to material in t.code
MB!C after entering materiel and qty in the selection screen i pressed enter on that time this massage is happening
Thanks
with regards
suneel

Hi lakshmi pathi ,
Sorry for the inconvenience i am new for this sap sd and also this community . Actually yesterday and today i got lot of solutions from this community .really i feel very happy with this and i continuous searching for my issues and i got so many solutions. these are also i searched but i dint got any solutions so i posted here .
sorry for the inconvenience
any way thanking you for giving valuable suggestion.
with regards
suneel

Is there any standard ODS for Contract (value type and quantity type)?

We know that in MM, contract records can be categorized into two different categories, Value type and Quantiy type. We are trying to see if there is any Contract ODS in business content that we can install which can take care of these two types of contract records that we can bring them over to BW from R3?
Thanks

Hi Kevin,
Please see this link,ODS looks related to your requirement.But seems its for CRM and not for MM.
http://help.sap.com/saphelp_nw04/helpdata/en/38/c3813ed9d23e44e10000000a114084/frameset.htm
cheers,
Vishvesh

No archive information found for object type and document type

Hi All,
When i try to view the print preview for a perticular doc type, system is giving the error as "No archive information found for object type and document type"
Diagnosis
    No information was found about optical archiving. This may be due to
    either of the following reasons:
    1. No valid archiving parameters were passed
    2. Your system is not configured for optical archiving
System Response
    Processing is cancelled.
Procedure
    Specify valid archiving parameters or check whether your system is configured for optical archiving
Regds,
CB

Hello,
You are trying to Print & also archive by selecting the option Print & Archive.
You have to do archivelink configurations and then create document type and assign to the object type with content repository with archivelink table.
If you want to archive the spool or output then you have to use object type as DRAW. If you are archiving invoice document or letters or so on then you have to know the object type/Business object of the transaction.
Please note that for archivelink configuration, attachment will be either stored in archive server or in SAP database table based on business requirement.
Hope this will give you some understanding on archiving area.
-Thanks,
Ajay

Transport.of SAP script form , printer def and device type is not enaugh

I transported the SAP script form , printer definition and device types of a thermal printer.
On original system the printout is ok but on target system not. What should I do?

Thank you for your fast answer
As the matther of fact I am technical person. I think Output type belongs to application. However the difference is visible in se71 ->Utilities->Printing test -> output device ->print preview.
As I wrote I transpored corresponding. SAP script form , printer def and device type

How to find Industry sector and material type of created Material

I have created a material by choosing Industry Sector and Material type as "Retail" and "Finished Product".
After creating the material I want to know, what is Industry Sector and Material Type of the created Material?
Please provide the corresponding T-code or solution.
Thanks in ADVANCE.

hi
for single material
u can go to mm03 material then basic data1
then click i icon in blue
u will get all details
for range of materials
go to se16
ive table MARA
then enter
go to settings >field selection here select
MTART Material Type
MBRSH Industry Sector
and then click ok
then execute
u will get list of material with ind sec and mat type
regards
kunal
award if helpful

Description of material group and material type

hi,
i want to know which are the tables for the description of material group and material type.
Edited by: Alvaro Tejada Galindo on Apr 2, 2008 3:49 PM

table name :MARA
Field name:
Material group:MATKL
for Material description
Table name :MAKT
fieldname:MAKTX
Rewards plz..........

SAP report for movement type and material type

Similar Messages

Maybe you are looking for