Sap script real time process

hai this is siva ,
i want sap-script real time process.

hai this is siva ,
i want sap-script real time process.

Similar Messages

  • Documentation of SAP HR- Real time scenario

    Hi,
    Please can anyone give me some documentation on how the functioning happens in SAP HR real time scenario.
    The real time implementation for Organizational management, Payroll, time Management and personal administration.
    It would be great if the document be sent to .
    Thank you !

    This is a Crystal Reports forum. Please close the existing thread an post your question here:
    SAP ERP Human Capital Management (SAP ERP HCM)
    I would recommend to explain in more detail the business need behind your quesiton in the new posting.
    Regards,
    Stratos

  • Acrobat Plugin Can be involved in Real-time processing

    Hi,
    I am implementing an acrobat plug-in solution for color separation and generation of PRN file for the given PDF file.
    Is the Plugin Architecture is good for the real time processing and RIPPIng?  I have a doubt like the Acrobat Process
    is involved in exectuing the each and every plugin HFT functions, is that would be fine for my plug-in to respond
    in realtime?
    Please suggest me.
    Thanks & Regards,
    Abdul Rasheed.

    First and foremost, Acrobat can NOT be used on a server, right?  So this is going to be a user-invoked process, correct?
    Beyond that, what do you thin would be a problem?
    From: Adobe Forums <[email protected]<mailto:[email protected]>>
    Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
    Date: Wed, 21 Sep 2011 07:29:28 -0700
    To: Leonard Rosenthol <[email protected]<mailto:[email protected]>>
    Subject: Acrobat Plugin Can be involved in Real-time processing
    Acrobat Plugin Can be involved in Real-time processing
    created by skrasheed<http://forums.adobe.com/people/skrasheed> in Acrobat SDK - View the full discussion<http://forums.adobe.com/message/3929688#3929688

  • SAP-XI Real time questions

    could you please provide me some real time questions on sap-xi,
    thank you

    1.  What are the Three types of XI Cache?  How are they used?
    2.  Where would you look to find Logical System in the SLD.
    ANS Business system wizard
    3.  What 2 Data Types are automatically created when the Namespace is saved in the Integration Repository?
    ANS. ExchangeFaultdata and Exchange log data.
    4   Which Development Object in SAP XI forms the "ROOT NODE" of an XML document when an XI message is generated?
    ANS MESSAGE TYPE
    5.  Describe the setting to "Permit Importing of SAP IDOCs or BAPI/ RFCs".  Where is this configured?
    ANS.
    6.  What are the valid types of Message Mappings?  Which is configured with the Graphical User Interface and requires no coding?
    ANS. MESSAGE MAPPING, XSLT MAPPING, ABAP MAPPING AND JAVA MAPPING, MESSAGE MAPPING REQUIRES no coding
    7.  What actions should you take if your Business System does not show when attempting to "Transfer from the SLD"?
    8. What is the relationship between Product, Product Version, Software Component and Software Component Version?  Give an example.
    ANS. PRODUCT: Represents a collection of all versions of a product . In SAP environment , a product corresponds to an SAP technical Component, eg 4.6c,4.6d,4.7
    COMPONENT: Represents a collection of all versions of a software components Examples of Software components are SAP_APPL,SAP_ABA,SAP_HR Software
    9.  Describe the Design Repository (DR) objects you created to configure a scenario.
    10.  What are the different design time components used by XI?
    11. What monitoring service does the integration server provide?
    12.  Describe the alert functionality of the runtime workbench.
    ANS Message alerting allows to set conditions for triggering Alerts. This allows notification of the correct parties for a specific classes of  errors.
    13.  In BPM, if you have async-sync bridge, does the QOS change?
    14.  What is logging/ trace? List 4 ways to enable logging/ trace?
    15.  Properties of an async message?
    16   Inbound XI message has problem, where do you look for solution?
    17.  Describe XI message format.
    18.  Describe end-to-end monitoring.  What is it?  How is it configured?  What are the different   views?
    ANS  It is a tool for monitoring end to end technical processes involving multiple components.
    to configure end to end monitoring :1. On initial screen of runtime work bench ,select configuration tab page.
    2.enter the logon data for the monitoring server.
    3.choose display.
    4.system displays the components of the correct domain and the integration server is selected as default.
    5.select the other components that you want to use and configure them as sender or receiver ,or both  depending on the component type.
    6.we can select monitorin level that we want to use for each of the selected component.
    7.Choose save configuration .
              Processes overview and the instance view are the two different views
    19. Different steps to make a Sender IDOC adapter work?
    20. JMS adapter can talk with what type of systems?  Give some examples...
    ANS Messaging systems to the integration engine
    21.What format can JDBC adapter communicate in?  Should you use native SQL?
    ANS. JDBC adapter converts data base content to XML messages and the other way around.
    22.If communications with JDBC using XML format, what are 4 actions you could do?
    ANS. SELECT, INSER, DELETE , UPDATE.
    23.  How does PCK and adapter framework engine differ?
    ANS.
    24.  Can JDBC adapter query DB tables?  Can it insert?
    ANS. Yes
    25.  JMS adapter scenario messaging system provider needs to submit what?
    26.  List some properties of receiving IDOC adapter.
    27.  JDBC/ JMS required certain steps before they can work?
    ANS vender specific JMS driver must be deployed on to the J2EE engine using SDM
            Appropriate JDBC driver must be deployed on the system
    28.  What is ALEAUDIT with respect to IDOCS?  When will they use it?
    29.  Properties of the HTTP adapter, does it use or need a sender or receiver communications channel or agreement?
    30.  What does a RFC adapter support?
    ANS sRFCs and tRFCs
    31.  Is EOIO supported by RFC?
    ANS No
    32.  What are the advantages of using a decentralized adapter engine?
    ANS.
    33.  What are the different monitoring statuses?  Where do you find them?
    ANS  Different monitoring statuses are Message Monitoring, Component monitoring , performance  Analysis and Alerting and we find this in Runtime Workbench.
    34.  What adapters are not in adapter engine? code you can type in,
    ANS HTTP and IDOC adapters are not in adapterengine and we can type code in  IDOC
    A.  Which ABAP proxy, in or outbound has Which one used classes with regards to Sync/ Async what is the method call?
    36.  With an optional node what would be the cardinality?  How do you make sure the subordinate fields get mapped?
    37.  WSDL what is it?  Where do you find it in Repository?  Is it used in Java or ABAP proxy?
    38.  XI 3.0, what are the supported mapping types?
    ANS Message mapping, ABAP mapping, JAVA mapping and XSLT mapping
    39.  What are the prerequisites for importing customer defined IDOC?
    ANS
    40.  What are the three IDOC transactions in XI?
    ANS  SM59, IDX1and IDX2.
    41.  Context object replace what?
    ANS  Xpath
    42.  Two things can make up a collaboration agreement, what are they?
    ANS Sender agreement and receiver agreement
    43.  What is a logical system, with respect to SLD?  Where would you assign it?
    ANS
    44.  What is the sender communications channel?
    ANS specify the potential senders of messages and the technical communication path
    45.  If error during inbound or outbound binding, where do you look to solve?
    46.  URI, URL and URN what are they and what are their differences?
    47.  To perform content based (logical) routing, two places it can be done.  What are the two places?
    48.  What is an integration process?  Where is it executed?  What stake?
    49.  In a message mapping you have advanced user defined function, can you test for context changes, if yes how?
    50.  What is multi-mapping?  Where is it used?  What are the advantages?
    ANS Multimappping is any mapping that involves N messages either or source or target side   Multimapping can be used in ccBPM
             1.used to map abstract interfaces
             2. Development is same as message mappings.
             3.n:1 transformation
             4.1:n transformation
             5. n:m transformation
    51.  What are the two XSLT tags, previously that could not be used in XI?
    ANS
    52.  Using a simple user defined function how can you send trace information to be monitored?
    53.  What is function "exists" in message mapping?
    ANS We can handle the error by checking whet her the source tag exists and if it does not we can pass an empty value, which generates the required target field.
    54.  What Jar file is required to perform Java Mapping?
    ANS
    55.  What is context in message mapping and how is it used?
    56.  What is remove context and splitby value?
    ANS to remove parent context of an element and spliby value is counterpart of remove context.
    57.  Where can you use user defined function?  What is its scope?
    58.  If you are building Java mapping class which class interface must it implement?
    59.  What is the scope of mapping template?
    60.  How does a Boolean function work in message mappings?
    61.  Source message occurs 3 times, target only once, what is wrong?
    62.  In simple mapping - one source results in 4 identical target messages, with regarding cardinality what is the problem?
    63.  What is a prerequisite to do ABAP mapping for a comple transformation?
    64.  What step can be inserted into an exception branch?
    ANS
    65.  How do you get an error condition to generated an alert?
    ANS
    66.  What actions can you perform in SXI_CACHE?
    67.  What is a wait step and why is it used?
    ANS It is a process flow control relavent and is used toset start time for next step
    68.  What is a block step and why is it used?
    ANS
    69.  Could multiple instances of an integration process be running at the same time?  If so, how does a message find its way to the correct instance?
    70.  Which XI objects can be used in an integration process?  Which ones from Repository?
    71.  Send message within an integration process to 8 receivers at the same time, how can you do this?
    72. What is a correlation?  What is a local correlation?
    73. What is the relationship between an integration process and business workflow?

  • Real-time process slowly filling up Postgres DB space

    I have a real-time job which takes data from a JMS queue, processes the data, and then applies inserts/updates to an Oracle DB. In the task definition for the process Results drill down is set = "None" yet the Postgres DB grows substantially as the job runs. Also the following SQL seems to find a row per JMS message processed...
    select count(*) from  pg_stat_user_tables where schemaname = 'results'
    Anybody any clues as to what may be causing the DB to grow?
    Cheers
    Jon

    It looks like we're going to have to - Postgres has just died...
    WARNING: 22-May-2014 04:24:27: Unable to index table : 'DNM_819_776_1_ingr'
    WARNING: 22-May-2014 04:24:27: A database error has occurred : ERROR: could not create relation base/25589/3549571: File too large. (Code: 200,302)
    com.datanomic.director.results.database.exception.sql.ResultsSQLException: A database error has occurred : ERROR: could not create relation base/25589/3549571: File too large. (Code: 200,302)
    at com.datanomic.director.results.database.translator.MapErrorCodes.mapException(MapErrorCodes.java:70)
    at com.datanomic.director.results.database.AbstractTableDAO.executeSQL(AbstractTableDAO.java:66)
    at com.datanomic.director.results.database.AbstractTableDAO.executeSQL(AbstractTableDAO.java:39)
    at com.datanomic.director.results.database.TableInsertDao.addIndexes(TableInsertDao.java:291)
    at com.datanomic.director.results.database.TableInsert.close(TableInsert.java:423)
    at com.datanomic.director.results.database.TableInsert.close(TableInsert.java:301)
    at com.datanomic.director.match.runtime.data.writers.AbstractDBWriter.close(AbstractDBWriter.java:173)
    at com.datanomic.director.match.runtime.data.realtime.ResultsBucket.finishRealtimeBuckets(ResultsBucket.java:63)
    at com.datanomic.director.match.runtime.RealtimeHandler.finalizeDBStore(RealtimeHandler.java:623)
    at com.datanomic.director.match.munger.MatchRealtimeExecutor.doTheStuff(MatchRealtimeExecutor.java:303)
    at com.datanomic.director.runtime.engine.RuntimeProcessMunger$MungerExecutable.execute(RuntimeProcessMunger.java:872)
    at com.datanomic.utils.execution.Parallelizer$Worker.run(Parallelizer.java:210)
    at com.datanomic.utils.execution.Parallelizer$Worker.runHere(Parallelizer.java:156)
    at com.datanomic.utils.execution.Parallelizer.run(Parallelizer.java:85)
    at com.datanomic.director.runtime.engine.RuntimeProcessMunger.execute(RuntimeProcessMunger.java:459)
    at com.datanomic.utils.execution.Parallelizer$Worker.run(Parallelizer.java:210)
    at java.lang.Thread.run(Thread.java:722)
    Do you recognise this as being the ultimate failure of too much data written to the Postgres DB?

  • SAP HR Real time Scenarios

    Hi,
    Can somebody give me a few examples of real time scenarios/challenging issues in SAP HR implementation? Can be anything in Personnel Administration, Org.Management, Time management, Benefits. Any help will be appreciated.
    Thanks,
    Prapar

    This is a Crystal Reports forum. Please close the existing thread an post your question here:
    SAP ERP Human Capital Management (SAP ERP HCM)
    I would recommend to explain in more detail the business need behind your quesiton in the new posting.
    Regards,
    Stratos

  • Real time processing in formula node

    hello all,
    I'm using LabVIEW for data acquisition of an analog signal.My sampling frequency is KHz. Now if I've to process these data's in formula node what type of variable I need to define in formula node.?
    For example,if I want to add add all the magnitudes of the samples and store the sum after each sample squired.How do I write the formula node?
    I'm an amateur in labVIEW. amateur guide.
    Thanks in advance.

    pramodantony wrote:
    Now if I've to process these data's in formula node what type of variable I need to define in formula node.?
    Who forces you to use the formula node? You simply need to process the data, the means should be irrelevant.
    Acquired data in LabVIEW can be of many forms (arrays, waveforms, dynamic data, etc.). Can you show us what you have?
    LabVIEW Champion . Do more with less code and in less time .

  • Continuous data acquisition and analysis in real time

    Hi all,
    This is a VI for the continous acquisition of an ECG signal. As far as I understand the DAQmx Analog read VI needs to be placed inside a while loop so it can acquire the data continously, I need to perform filtering and analysis of the waveform in real time. The way I set up the block diagram means that the data stays int the while loop, and as far as I know the data will be transfered out through the data tunnels once the loop finishes executing, clearly this is not real time data processing. 
    The only way I can think of fixing this problem is by placing another while loop that covers the filtering the stage VIs and using some sort of shift registeing to pass the data to the second loop. My questions is whether or not this would introduce some sort of delay, and wether or not this would be considered to be real time processing. Would it be better to place all the VIs (aquicition and filtering) inside one while loop? or is this bad programming practice. Other functions that I need to perform is to save the data i na file but only when the user wants to do so. 
    Any advice would be appriciated. 
    Solved!
    Go to Solution.

    You have two options:
    A.  As you mentioned, you can place code inside your current while loop to do the processing.  If you are clever, you won't need to place another while loop inside your existing one (nested loops).  But that totally depends on the type of processing you are doing.
    B.  Create a second parallel loop to do the processing.  This would decouple the processes to ensure that the processing does not hinder your acquisition.  See here for more info.
    Your choice really depends on the processing that you plan to perform.  If it is processor-intensive, it might introduce delays as you mentioned.  
    I would reccomend you first try to place everything in the first loop, and see if your DAQ buffer overflows (you can monitor the buffer backlog while its running).  If so, then you should decouple the processes into separate loops.
    Regarding whether or not "this would be considered to be real time processing" is a loaded question.  Most people on these forums will say that your system will NEVER be real-time because you are using a desktop PC to perform the processing (note:  I am assuming this is code running on a laptop or desktop?).  It is not a deterministic system and your data is already "old" by the time it exits your DAQ buffer.  But the answer to your question really depends on how you define "real-time processing".  Many lay-people will define it as the processing of "live data" ... but what is "live data"?

  • TCP/IP Connecting with Real Time Controller

    I have a host running Labview on a windows XP and a realtime embedded controller on a pxi chassis that acts as the server.  When the realtime is started it automatically goes into listen mode and listens for a connection from the host.  The host opens a connection.  After a valid connection is open the Real-Time side goes into a TCP_Read and the host can then send commands that the real time processes and sends to the FPGA on the pxi-chassis. 
    Now the problem I'm having is how to handle the case when a TCP connection is lost.  I can have the TCP_Read on the real-time error on a time out and then go into a listen mode but this isn't very logical because then the host will have to reconnect each time a time out occurs.  So if I make the TCP_Read timeout be infinite and if the connection is lost (let's say I unplug the ethernet cable and re-plug it back in) then I cannot recover from this and the Real-time will need to be re-booted.
    I've tried to send the Real-time into listen mode if the error code is other than a timeout error (code 56) and have it go back to TCP_read mode if it is a timeout error.  But if the connection is lost by means of a physical way (such as me pulling the ethernet wire and plugging it back in) then the Real-Time never sees that the connection is invalid.  The host on the other hand can detect it bc it will get an error when it's trying to write?
    So my is:
    Is there any way to prevent an infinite loop that needs a reboot and at the same time prevent the host from reconnecting every time there is a timeout?

    Hi SJeane,
    I apologize for taking so long to respond, but I wanted to test this on my end.  In doing so, I realized that using the RT Reboot Controller.vi after the connection is lost does not work because the message to reboot cannot be relayed to the target without communication!  Thus, to solve this problem, we have to approach it a different way.  You mentioned that you tried programmatically clearing errors, but did you try to reestablish connection after clearing the errors?  I tested this on my end with a FieldPoint controller, and the attached VIs resumed operation even after unplugging/replugging the Ethernet cable (no reboot).  Will this solution work for you?
    Peter K.
    National Instruments
    Attachments:
    Reestablish.zip ‏39 KB

  • CRIO-9067 Real-time unexpected error restart (Hex 0x661)

    Hi all,
    I recently moved to LV2014 SP1 and NI-RIO 14.5 to support development of a cRIO-9067 Linux RT controller. The past two days of development have seen LabVIEW crash numerous times (eight at last count), along with numerous VIs being in an undeployable state due to some unseen error (there's no broken run arrows anywhere, and a LV restart seems to cure what was broken).
    The above issues are tolerable, if somewhat annoying. What's concerning is the most recent error I received this morning. I had just run the top level VI from source (and verified it was running), went to make myself a coffee and came back to this error.
    LabVIEW: (Hex 0x661) The LabVIEW Real-Time process encountered an unexpected error and restarted automatically.
    The VI wouldn't have been running for more than 10 minutes. I've since tried to reproduce the error without luck.
    This is somewhat concerning as the application for this cRIO will be 24/7 process control. Is this a known issue with the newer Linux RT controllers? Is there anything that can be done to detect the error in LabVIEW?
    Below is a screenshot of the software installed on the controller:

    You should be able to access the error logs on your controller through MAX.
    Is There an Error Log File for My Real-Time Controller?-http://digital.ni.com/public.nsf/allkb/E734886E027D0B6586256F2400761E30?OpenDocument
    How Do I Locate the Error Logs on My cRIO if I Don't Have MAX? - http://digital.ni.com/public.nsf/allkb/9D2F9D4F8C834D678625766D00633837
    Could you post the error log files for the Compact RIO targets that reproduce the error?
    It’s possible that a memory leak is occurring someplace in your program that causes the crash.
    Also, are you using the System Config Set Time.VI anywhere in your application? There has been a reported issue with this VI in relation to this error, but the hex code error is not common. We can try to cross-compare the issue internally to see if there are simlarities to the reported case. 
    Additionally, is this crash repeatable with other code, say a simple shipping example? I would imagine that the crash is related to a routine called in your program, but it’s possible there is a corruption in the software installation on your target.
    Also, what is the ProcessCommandMessage.vi responsible for/doing in your application?
    Will M.
    Applications Engineer
    National Instruments

  • Real-Time Offer Management 翻译为中文是什么意思

    SAP CRM产品地图有 Real-Time Offer Management, 翻译为中文是什么意思

    抱歉,我的用词u2018促销u2019,误导了你,TPM是一个完整的行业解决方案模块,能够进行促销计划,执行,促销预算管理,促销费用报销等等功能。RTOM更多用在IC和WebShop,当客户在和IC座席交互或者在网店上浏览商品时,自动给客户提供的产品建议。它的强处在于有商业智能,能够实时学习客户的购买行为,帮助座席给客户建议相关性强的产品,增加成交的机会。
    RTOM的elearning[链接|http://www.sap.com/services/education/catalog/globaltabbedcourse.epx?context=%5B%5B%7CORTOM7%7C%7C%7C091%7CG%7C%5D%5D%7C]

  • Real time JVM  Implementation

    Hi All,
    We some students of our university would like to implement Real time JVM on Linux.
    We do have a solid idea on linux as well as on Java. But this is a very new and interesting topic.
    Can anyone help me how to start the assignment i.e. implementation of real time jvm on linux.
    Thanks and Regards
    tapas

    Just guessing...
    There are only two impacts to real time processing in java.
    First the garbage collector. Since it runs at odd times. And ties up the rest of the application for unpredictable amounts of time a real time system will need another type of solution.
    Second, threads. Because threads prempt each other this can also produce unpredictable behavior. Some usual solutions involve no threads at all. Or a way to preclude interruption.
    Finally I suspect that if you do a literature search you would be able to find some papers on this subject.

  • Real time solution using Documaker

    Hi all,
    We are using Documaker 10.3, currently we have a flat file as input to Documaker which creates the forms in our daily batch. Now we are planning to generate few forms in real time, like on a click of button from a source system a document should generate.
    Right now I can think of creating a flat file out of the source system and generate a form (miniature batch), not satisfied with this approach though. Is there any better way of dealing with these kind of situations? Is there any facility (which I am obviously not aware of) in Documaker which can take care of this.
    Thanks in advance

    Venkata,
    You can certainly continue to use the flat-file approach if it satisfies the requirements for your real-time processing. If the source system is not able to generate a "batch of one" extract file, then you will need to explore other methods of generating your input for Documaker, which are going to be specific to your source system -- can you elaborate on this?
    When running Documaker in real-time mode, it's a fairly simple process using components in the Oracle Documaker suite -- specifically Docupresentment. However, with pre-11.4 versions of Documaker, the licensing for Docupresentment was handled separately, so you will need to ensure you are licensed for Docupresentment to use it.

  • Can send me recent real time sap script interivew question?

    Hi any one plz send me the real time sap script interivew questions... or mail me on [email protected]

    Hi,
    Please check the links,
    http://www.sap-img.com/sapscripts/faq-for-sap-scripts.htm
    FAQ on Scripts
    If this data isn't enough, then you can search for SAP script interview questions in SDN, you get more results.
    Regards,
    Hema.
    Reward points if it is useful.

  • How can i understand the Process Chain management in real time!!!

    Hi,
    now i am learning BW concepts. now i would like to know the real time scenarios regarding Process chains. can any body help me in this matter?.
    thanks,
    stikanth.ch

    Hi,
    A process chain is a defined sequence of interdependent processes required to perform acomplex task in an SAPBW environment. Data maintenance tasks in SAPBW are notrestricted to uploading data. Aggregate rollups, index maintenance, master data and ODS activation, and a variety of other jobs are required to update data, guarantee best-possible performance, and maintain data integrity. Typical SAPBW implementa-tions have complex interdependent networks of jobs in place that run every night, week,or month.Previous releases of SAPBW did not provide an integrated solution for scheduling and monitoring those kinds of job networks. This has changed with the introduction of process chains in release 3.0. Process chains allow you to define complex job networks consisting of standard SAPBW jobs, as well as custom jobs; they support visualizing the job network and centrally controlling and monitoring the processes.
    (from "Mastering the SAP BIW")
    New Features in BI 2004s Process Chains
    /people/mallikarjuna.reddy7/blog/2007/02/08/new-features-in-bi-2004s-process-chains
    Designing
    /people/vishvesh.bahirat/blog/2006/11/29/bw-process-chain-design
    Process chain creation in 2004s - step by step
    /people/juergen.noe/blog/2008/01/11/process-chain-creation--step-by-step
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/events/sap-teched-03/using%20process%20chains%20in%20sap%20business%20information%20warehouse
    http://help.sap.com/saphelp_erp2005/helpdata/en/87/13843b74f7be0fe10000000a114084/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/67/13843b74f7be0fe10000000a114084/content.htm
    Process Chain Errors
    /people/mona.kapur/blog/2008/01/14/process-chain-errors
    Common Process chain errors
    process chain issues or errors
    Try Searching in SDN for this Topic and you will find much detailed info as this is discussed very frequently.
    Hope this helps.
    Thanks,
    JituK

Maybe you are looking for

  • Vendor performance analysis report

    Hi all, requirement to create an ALV report for vendor performance analysis...  wat r d tables n feilds which are to be used fr this... any help is appreciated..

  • I need to fill a form using adobe reader in safari...

    I need to fill a form using Adobe reader in Safari, and although the plug-in is in my Library/internret plug-ins folder, I always get the message, when I get to the site form page in Safari to install plug-in. Any thoughts ? Yves

  • Call transaction

    Hi All, I'm  calling  transaction MD03 from my report to  run MRP on single material using following code. FORM RUN_MRP. read line sy-lilli field value pick2. if pick2 EQ 'X'.   set parameter id 'MAT' field itb1-matnr .   set parameter id 'WRK' field

  • Ticker view in obiee 11g

    hi I am using ticker view in one of my report,,,but not able to get the reflection for the same. is there any different internet settings if yes then plz suggest. Thanks in advance

  • Middle Name appearing twice in CRM

    Hi everyone, I created a custom CRM form containing just a "Middle Name" Field. I noticed though in the admin under CRM > Customers that there is a "Middle Name" appearing under "Contact Details" and then a second "Middle Name" that appears further d