SAP Scripts for Stock Removal and Stock Placement ?

Hi All,
Can you please let me know what are the SAP script names and Transaction codes for Stock Removal and Stock Placements ?
Thanks,
Raj

Hi
Tcode is MIGO only (select Goods receipt) and mvt type as
Putaway (305, 315, and so on)
Stock removal (303, 313, and so on)
Transfer posting (301, 311, and so on)
regards
Yogesh

Similar Messages

New SAP scripts for P14,P35, P60

Can anyone let us know where we can get sap script for HR_GB_P14_2010,
HR_GB_P35_2010 and HR_GB_P60_2010?

Hi Vijay,
The sap script of HR_GB_P14_2010 and HR_GB_P35_2010 are provided via
Note No. 1395778 but the HR_GB_P60_2010 is still under process. You would
get the same via Note 1415913, which is still under process as mentioned
in above note.
Regards
Roop

Full Stock Removal & Full Stock Placement

Assume, in the source storage bin "B1" we have stock of 100 qtys. (Storage type "S1") and the destination storage bin is "B2" (Storage type "S2").
Suppose, a process order has been created for 75 qtys. and corresponding to that a TR generated for 75 qtys..
So, material has to be transfered from source bin BIN "B1" (Storage type "S1") to destination bin "B2" (Storage type "S2").
So, when we create a TO for this TR & confirm the TO, system picks only 75 qtys. from the source bin "B1" (storage type "S1") & transfers 75 qtys. to the destination storage bin "B2" as per the TR qtys.. (instead full 100 qtys. is to be transfered)
Now, the clients requirement is that, complete 100 qtys. is to be transfered from the source bin "B1" (Storage type "S1") to destination bin "B2" (Storage bin "S2").
In the configuarion settings for Storage type 'S1', "Full stock removal is activated" and "Retun stock to same bin is active" (SU Mngt. is active. ). As the SU Mngt. is active, we are not able to un-check the indicator "RETURN STOCK TO SAME BIN".
But even though the above setting is active, while stock removal & placement, the system is considering only 75 qtys.and transering the 75 qtys. from "B1" to "B2", instead at the time of stock removal system should consider the full 100 qtys. & full stock 100 qtys. is to be transfered to the destination bin "B2".
Also, if i check the indicator "OVERDELIVERIES" for movement type 319, we are able to transfer the full 100 qtys. to destination bin "B2", but we have a situattion not to check this indicator for movement type as this will effect for all the warehouse numbers as well as all the storage types.
So, Please help me, how can we achieve the "FULL STOCK REMOVAL & FULL STOCK PLACEMENT" .....
What STATERGIES to be selected & any other configuration is invovled in this....please let me know.
Thanks & Regards,
Pavan CN
Edited by: cn_pavan on Jul 25, 2009 7:19 PM

Hi,
Please check this thread:
Re: Issue on complete stock removal
remark:
we have a situattion not to check this indicator for movement type as this will effect for all the warehouse numbers as well as all the storage types.
As I remember (I'm not before SAP, so maybe I'm mistaken) you can define movement type WH-specific.
Regards,
Csaba
Edited by: Csaba Szommer on Jul 26, 2009 7:59 AM

How to attach print program and sap script for F150 transaction

How to attach print program and Z sap script for F150 transaction

Hi,
you can find the customization for dunning in transaction SPRO under this path: Financial Accounting->Accounts Receivable and Accaounts Payable->Business Transactions->Dunning.
Kostas

Stock tracking and stock posting

Hello,
In the Stock Management/stock transactions/Initial quantities, stock tracking and stock posting,
Suppose the following context:
Item stock: 1000
Counted: 900 (posted in stock tracking)
When reconciling in stock posting is raising this error:
"Item price has not been entered"
though we choosed Allow Inbound Posting without Price.
This is only happening when the counted quantity is smaller than the item stock, that is, in the example given everything is OK for counted quantities >= 1000.
SAPB1 Version 2007PL30
We have try in 2005PL45, and it worked. So, we suppose this could be a bug. The strange thing is that it worked in a previous version!
Do you know something about this behaviour?
Thank you for your help,
Regards,
Vanessa

Hi,
Please refer to notes:
1155329 Error: "item price has not been entered" in Stock Posting
1173589 SAP Overview Note for SAP Business One 2007 A PL 37
Hope this can be helpful
Best Regards
Helen Sun
SAP Business One Forums Team

User Email Id on the SAP script for the balance confirmation

User needs mail id on the SAP script for the balance confirmation
I have checked the AR-->Correspondence but not able to figure out.
Thanks

Hi,
Actually the issue is:
User(Witty Lam) wants his official Email id while generating the SAP Script on header.
We are able to get the Fax and Telephone number but Email id is not coming.
Can you help me out in finding the place where we maintain the USER's phone, fax number and email id.
I have identified the Structure and field i.e FSABE-INTAD
My project is production support project..
Thanks,
Jittesh

Very imp stock transfer and stock transport order

hi folks,
please explain me in detail the difference between stock transfer and stock transport order.
regards,meena

Hi:
Stock Transfer is the physical movement of material from one location to another location,stock transport order is one way of doing the stok transfer.
Stock can be transfer between plant to plant,company code to company code,storage location to storage location.
However there are different procedures for stock transfers:
1.Stock Transfer using one step procedure: Here Goods issue and Goods receipts happens in single step.
2.Stock Transfer using Two stage procedure:The two-step procedure allows you to monitor the stocks in transit. After the goods issue is posted at the issuing point, the stock appears "in stock transfer" at the receiving point and is managed as such in the system.
3.Stock Transport Order:
This is transfer of material from one plant to other plant or co.code to co.code via SD route.
Here a.receiving plant raise the stock transport order on issuing plant.
       b. Issiuing plant creates the outbounmd delivery against STO and PGI.IF it is in India,then excise
           invoice creation.
       c. Receiving plant post the goods receipt against outbound delivery and post the excise ivoice.
       d. Invoice verification.
The main advantage of Stock Transport order is you have a more control because you can have purchasing document behind itand you can check the PO history which would gives all the details for Delivery as well GR documents.
However ftor STO via SD you need to configure the set up stock transport order in MM>Purchasing>Purchase Order-->Set Up Stock Transoport order.
Also on a data maintanace side you need to maintain the custmor and vendor relations.
Hope this would helps you.
Cheers
Rahul
Awards plz.if helpful.

Transport.of SAP script form , printer def and device type is not enaugh

I transported the SAP script form , printer definition and device types of a thermal printer.
On original system the printout is ok but on target system not. What should I do?

Thank you for your fast answer
As the matther of fact I am technical person. I think Output type belongs to application. However the difference is visible in se71 ->Utilities->Printing test -> output device ->print preview.
As I wrote I transpored corresponding. SAP script form , printer def and device type

2LI_03_BF Material Stock Type and Stock Category Determination

Hi All,
I need your help in determining the stock type and stock category of a certain material.
Is there a way to determine it manually? cause i tried to look at the MSEG table and it does not show anything but when i try to run the material document that contains the movement/material it populates the stock type and stock catertory in the setup tables.
Regards,
Alden

Hello
1) 2LIS_03_BF clearly gives you the receiving plant and the issuing plant. For eg if you are doing plant to plant transfer there will be 2 entries in 2lis_03_bf , one for issue and one for receiving. You can bifurcate the receiving plant and the issuing plant by using either process key (BWVORG ) or debit credt (SHKZG) (H stands for issue & S stands for receipt).
2) 0MAT_PLANT_ATTR provides you the plantwise specila procurement type
3) you will get VBUK-GBSTK in the standard source 2LIS_11_VASTH . You will have to combine the data at the BW level
Regards
Gajesh

Status Stock M and Stock Category S

I have problems for GR using MB1C and mov 501 because I need to use that with Status Stock M and Stock Category S, Do you know if is possible this kind of combination M and S for GR?

Hi Rose, thanks for your information, let me explain you all the context,
First I need GR for damage materials to the WH but with Special Stock field = M for non valued (without accountant document) and second this material needs the stock category "S" (blocked stock) because this material doesn't need to create a necessity when the MRP runs (due is scrap material).
I hope this information could clarify my question and is enough for you to give me an answer
Thanks in advanced
Diana

Can I use Time Capsule for Time Machine and a place to put my iPhoto Library

Can I use Time Capsule for Time Machine and a place to put my iPhoto Library?

Only if you partition the Time Capsure into two partitions, one for TM and one for the iPhoto LIbrary. But you won't be able to backup that library as it will be on the same drive as the TM backups.
It's not recommended. An alternative solution is to get another EHD, move the library to it and run it from there. Then TM can backup both your boot drive and the working EHD drive.
OT

SAP Script for Delivery

Dear ABAPer's ,
I am working on a SAP Script for Delivery.The requirement is I need a print out for each line item in a delivery in a seperate page.
For example if the delivery has 3 line items.I should print each line items details in 3 seperate pages.
I have modified the routine RVADDN01 according to my requirements.
How to do this...

Hi Sapient,
 In order to create a page for each line item what you have to do is in the script part where you have written the values.
for eg: if the line item details(VALUE) are in an internal table "I_DETAILS"
Script:
/E DET
P1 &I_DETAILS-VALUE&
/: NEW-PAGE
Driver program:
Loop at i_details.
CALL FUNCTION 'WRITE_FORM'
 ELEMENT = 'DET'
 TYPE = 'BODY'
 WINDOW = 'MAIN'.
Endloop.
Try this it would work.
Reward if helpful.
Regards,
Tushar

Sap script for Delivery(item wise)

Dear ABAPer's ,
I am working on a SAP Script for Delivery(Item wise).The requirement is I need a print out for each line item in a delivery.I am using tcode VL71 for taking prinout.
I have modified the routine RVADDN01 according to my requirements.But the problem is i am not able to capture
which line item is selected.Whichever lineitem i select it is giving the details of all the line items.
Am I using the correct routine or someother routine is available for item wise details.
Please clarify.

hi SAP ,
u have selected right one , Just Debug the script from which text Element u are getting the data into Form, then check ur Logic.
Regards
Prabhu

How to create a sap script for sales order header items?

Hi friends i am totally new to scripts i have got a task where i have to create a sap script for sales order header items details, the clue that i have got is to create using MEDRUCK but i have got no idea please can any body help me with this task with any sample sap script?
Points will be rwwared with out fail Thks in advance.

Hi,
The Standard Form NAme is RVORDER01
Regards
Sandipan

How to write SAP Script for AP/AR?

Hi,
I would like to know how to prepare a SAP Script for AP/AR. Can anybody help.
Thanks
ST

Hi,
I would like to know how to prepare a SAP Script for AP/AR. Can anybody help.
Thanks
ST

SAP Scripts for Stock Removal and Stock Placement ?

Similar Messages

Maybe you are looking for