SAP Service Not Starting in BI 7.0
Hi All,
Today morning my BI 7.0 server restarted twice automatically, then I started the server in last known good configuration after that when I tried to start the server from SAP MMC it didn't started and when i checked the sap service in services.msc it gives error <b>"Some services stop automatically when they have no work to do"</b>.and didn't get started.
I found a thread similiar to this problem and following that I used sapstartsrv.exe in usr\sap\SID\......\exe directory. This didn't worked for me and by using this Both the services SAPEP2_00 and SAPEP2_01 got removed from services.msc.
Now I have installed these service again and now I am at same status as in morning,
In Event log
For SAPEP2_00 and SAPEP2_01 the following error are avaliable:
--Initialization failed. Service not started. [ntservmain.cpp 1269]
--Unable to change to Directory
gms40\saploc\EP2\DVEBMGS00\work. (Error 53 ERROR_BAD_NETPATH: The network path was not found. ) [ntservstart.cpp 966]
If any one have gone through such situation please help me out from this, Its has became too critical for me now.
Thanks in advance....
Regards
Vinay Paul
Hi
Service are started now but when I am trying to start the server, it is showing strdbs.cmd, sapcpe.exe in red status "could not be started".
Regards
Vinay Paul
Message was edited by:
Vinay Paul
Similar Messages
-
Problem with SAP service not starting
Hi
The service SAP<sid>_00 service in services.msc is not running and when i try to start it, it is throwing message like <b>"Some services stop automatically when they have no work to do"</b>. The startup type is automatic. What shall i do to start this service. The SAP system as a result not getting listed in SAP MMC.
Please advise me in this regard
Thanks,
Ganesh Nit will check the existence of $(DIR_INSTANCE)\work and will change its current working directory to this directory.
the service is started using a Startprofile.
If $(DIR_INSTANCE) is not explicitly is set in the Startprofile it defaults to
saplocalhost\saploc\$(SAPSYSTEMNAME)\$(INSTANCE_NAME).
saplocalhost\saploc is translated to the directory structure if a share saploc exists on the local computer.
the share saploc was recreated (in other words you create a share named SAPLOC pointing to a different directory than <sapdrive>:\usr\sap) you will get this error message.
$(xxx) are possible profile parameters in start and instance profiles.
DIR_INSTANCE is normally not set
SAPSYSTEMNAME and INSTANCE_NAME are set in any case.
Peter
SAPLOC can only exist once on an application server.
regards
Peter -
SAP Service not getting started
Hi Experts,
After rebooting the WEB AS java server i am not able to restart the SAP services i.e. SAP<SID>_00, SAP<SID>_01 etc.
Gettign the following error
1. Initialization failed. Service not started. [ntservmain.cpp 1497]
2. Unable to change to Directory
<HOST Name>\saploc\<SID>\JC00\work. (Error 53 ERROR_BAD_NETPATH: The network path was not found. ) [ntservstart.cpp 1024]
Could you please let me know regarding this.
Regards,
Sarbjeet SinghHi.
If you do a simple search through SCN you will find that similar questions are already answered, for instance - Error_bad_netpath.
Please, follow the [rules of engagement|https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement].
Best regards,
Aliaksandr Zhukau -
Critical Services Not Starting Automatically & Access to Server occasionally dropping out
For the last few months we have been trying to resolve an issue where access to files on the server (SBS2011 - running domain services, exchange, etc) get so slow or just unresponsive. Logging onto the server is also not possible till it starts responding
again.
We also found that when the server starts, the Netlogon services does not start automatically event though it is set to auto start. There are a number of other services mainly exchange services that do not start as well but it seems this may be due to the
net service not starting.
We have re-installed the OS but this does not seem to have fixed the issue. The environment is a mix of the SBS2011 server, two Windows Server 2003 boxes - one running Terminal Services. The other was being used for SAP but no longer in use. The clients
are mainly XP with a few Windows 7 machines. We are in the process of planning the replacement of the XP machines.You re-installed SBS2011? - that seems rather drastic. Did you maintain your domain or just set it all up again?
This sounds like a DNS issue but have a look at the event viewer and google/post the Event ID and Source. Given those two you can start to track down the cause and possible fixes at www.eventid.net. Just be aware that SBS2011 has a lot of
"normal" event errors, see http://support.microsoft.com/kb/2483007
You should also run the SBS best practice analyzer and maybe run the "Fix my network" wizard in the SBS console. Also make sure SBS is the DHCP server for the network.
-- Al -
SAP Does not start after backup complition
Dear All,
Since last two times when we put Offline whole database + Redolog
backup, after complition of backup SAP Does not start.
I have tried to start SAP Manually, but didn't start.
To start SAP we have to restart the SERVER.
Attached please find backup log.
Thanks and Regards,
NiravThanks you all for quick response.
Backup log is pasted at end of message. Wile you please guide me where dev_disp log is located.
I am taking backup through DB13.
When I got this problem. Database was not started. But at O/S level SMON is running. Shutdown normal or transactional was not working. I have to shutdown abort. and start the database.
SAP services are also running at O/S level.
I have doubt about work process.
Thanks
Nirav
BR0051I BRBACKUP 7.00 (24)
BR0055I Start of database backup: beamxrbx.aft 2009-05-06 04.00.05
BR0484I BRBACKUP log file: /oracle/PRD/sapbackup/beamxrbx.aft
BR0477I Oracle pfile /oracle/PRD/102_64/dbs/initPRD.ora created from spfile /oracle/PRD/102_64/dbs/spfilePRD.ora
BR0083W Compression rates out of date - run BRBACKUP with option '-k only'
BR0101I Parameters
Name Value
oracle_sid PRD
oracle_home /oracle/PRD/102_64
oracle_profile /oracle/PRD/102_64/dbs/initPRD.ora
sapdata_home /oracle/PRD
sap_profile /oracle/PRD/102_64/dbs/initPRD.sap
backup_mode ALL
backup_type offline_force
backup_dev_type tape
compress hardware
tape_copy_cmd dd
cpio_flags -ovB
cpio_in_flags -iuvB
dd_flags obs=64k bs=64k
dd_in_flags ibs=64k bs=64k
rewind mt -f $ rew
rewind_offline mt -f $ offl
tape_size 102400.000 MB
tape_address /dev/rmt/0mn
tape_address_rew /dev/rmt/0m
volume_backup PRDB01,PRDB02,PRDB03,PRDB04,PRDB05,PRDB06,PRDB07,PRDB08,PRDB09,PRDB10,
PRDB11,PRDB12,PRDB13,PRDB14,PRDB15,PRDB16,PRDB17,PRDB18,PRDB19,PRDB20,
PRDB21,PRDB22,PRDB23,PRDB24,PRDB25,PRDB26,PRDB27,PRDB28,PRDB29,PRDB30
expir_period 29
tape_use_count 100
exec_parallel 0
system_info prdadm/oraprd rlsdbi HP-UX B.11.31 U ia64
oracle_info PRD 10.2.0.2.0 8192 7547 46814166 rlsdbi UTF8 UTF8
sap_info 700 SAPSR3 0002LK0003PRD0011Q21439814270013NetWeaver_ORA
make_info hpia64 OCI_102 Apr 21 2007
command_line brbackup -u / -jid ALGOF20090506040000 -c force -t offline_force -m all -p initPRD.sap -a -c force -p initPRD.sap -sd
BR0116I ARCHIVE LOG LIST before backup for database instance PRD
Parameter Value
Database log mode Archive Mode
Automatic archival Enabled
Archive destination /oracle/PRD/oraarch/PRDarch
Archive format %t_%s_%r.dbf
Oldest online log sequence 7544
Next log sequence to archive 7547
Current log sequence 7547 SCN: 46814166
Database block size 8192 Thread: 1
Current system change number 46815598 ResetId: 674927195
BR0118I Tablespaces and data files
Tablespace TS-Status F-Status File Size Id. Device Link Type MaxSize IncrSize BlkSize
PSAPSR3 ONLINE* ONLINE+ /oracle/PRD/sapdata1/sr3_1/sr3.data1 2097160192 4 1073872902 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ /oracle/PRD/sapdata1/sr3_2/sr3.data2 2097160192 5 1073872902 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ /oracle/PRD/sapdata1/sr3_3/sr3.data3 2097160192 6 1073872902 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ /oracle/PRD/sapdata1/sr3_4/sr3.data4 2097160192 7 1073872902 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ /oracle/PRD/sapdata1/sr3_5/sr3.data5 2097160192 8 1073872902 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ /oracle/PRD/sapdata2/sr3_10/sr3.data10 2097160192 13 1073872903 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ /oracle/PRD/sapdata2/sr3_6/sr3.data6 2097160192 9 1073872903 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ /oracle/PRD/sapdata2/sr3_7/sr3.data7 2097160192 10 1073872903 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ /oracle/PRD/sapdata2/sr3_8/sr3.data8 2097160192 11 1073872903 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ /oracle/PRD/sapdata2/sr3_9/sr3.data9 2097160192 12 1073872903 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ /oracle/PRD/sapdata3/sr3_11/sr3.data11 2097160192 14 1073872904 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ /oracle/PRD/sapdata3/sr3_12/sr3.data12 2097160192 15 1073872904 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ /oracle/PRD/sapdata3/sr3_13/sr3.data13 2097160192
BR0143I Backup type: offline_force
BR0113I Files will be compressed by hardware
BR0130I Backup device type: tape
BR0102I Following backup device will be used: /dev/rmt/0mn
BR0103I Following backup volume will be used: PRDB25
BR0289I BRARCHIVE will be started at the end of processing
BR0134I Unattended mode with 'force' active - no operator confirmation allowed
BR0208I Volume with name PRDB25 required in device /dev/rmt/0mn
BR0280I BRBACKUP time stamp: 2009-05-06 04.00.07
BR0226I Rewinding tape volume in device /dev/rmt/0m ...
BR0351I Restoring /oracle/PRD/sapbackup/.tape.hdr0
BR0355I from /dev/rmt/0mn ...
BR0241I Checking label on volume in device /dev/rmt/0mn
BR0242I Scratch volume in device /dev/rmt/0mn will be renamed to PRDB25
BR0280I BRBACKUP time stamp: 2009-05-06 04.00.08
BR0226I Rewinding tape volume in device /dev/rmt/0m ...
BR0202I Saving /oracle/PRD/sapdata2/sr3700_7/sr3700.data7
BR0203I to /dev/rmt/0mn ...
#FILE..... /oracle/PRD/sapdata2/sr3700_7/sr3700.data7
#SAVED.... sr3700.data7 PRDB25/43
BR0280I BRBACKUP time stamp: 2009-05-06 04.20.17
BR0063I 40 of 62 files processed - 82240.312 MB of 120066.277 MB done
BR0204I Percentage done: 68.50%, estimated end time: 4:29
BR0001I **********************************________________
BR0202I Saving /oracle/PRD/sapdata2/sr3700_8/sr3700.data8
BR0203I to /dev/rmt/0mn ...
#FILE..... /oracle/PRD/sapdata2/sr3700_8/sr3700.data8
#SAVED.... sr3700.data8 PRDB25/44
BR0280I BRBACKUP time stamp: 2009-05-06 04.20.42
BR0063I 41 of 62 files processed - 84640.320 MB of 120066.277 MB done
BR0204I Percentage done: 70.49%, estimated end time: 4:29
BR0001I ***********************************_______________
BR0202I Saving /oracle/PRD/sapdata3/sr3700_10/sr3700.data10
BR0203I to /dev/rmt/0mn ...
#FILE..... /oracle/PRD/sapdata3/sr3700_10/sr3700.data10
#SAVED.... sr3700.data10 PRDB25/45
#FILE..... /oracle/PRD/sapdata1/system_1/system01.dat
#SAVED.... system01.dat PRDB25/60
BR0280I BRBACKUP time stamp: 2009-05-06 04.27.07
BR0063I 57 of 62 files processed - 119850.445 MB of 120066.277 MB done
BR0204I Percentage done: 99.82%, estimated end time: 4:27
BR0001I **************************************************
BR0202I Saving /oracle/PRD/origlogA/log_g11m1.dbf
BR0203I to /dev/rmt/0mn ...
#FILE..... /oracle/PRD/origlogA/log_g11m1.dbf
#SAVED.... log_g11m1.dbf PRDB25/61
BR0280I BRBACKUP time stamp: 2009-05-06 04.27.14
BR0063I 58 of 62 files processed - 119900.446 MB of 120066.277 MB done
BR0204I Percentage done: 99.86%, estimated end time: 4:27
BR0001I **************************************************
BR0202I Saving /oracle/PRD/origlogB/log_g12m1.dbf
BR0203I to /dev/rmt/0mn ...
#FILE..... /oracle/PRD/origlogB/log_g12m1.dbf
#SAVED.... log_g12m1.dbf PRDB25/62
BR0280I BRBACKUP time stamp: 2009-05-06 04.27.22
BR0063I 59 of 62 files processed - 119950.447 MB of 120066.277 MB done
BR0204I Percentage done: 99.90%, estimated end time: 4:27
BR0001I **************************************************
BR0202I Saving /oracle/PRD/origlogA/log_g13m1.dbf
BR0203I to /dev/rmt/0mn ...
#FILE..... /oracle/PRD/origlogA/log_g13m1.dbf
#SAVED.... log_g13m1.dbf PRDB25/63
BR0280I BRBACKUP time stamp: 2009-05-06 04.27.29
BR0063I 60 of 62 files processed - 120000.448 MB of 120066.277 MB done
BR0204I Percentage done: 99.95%, estimated end time: 4:27
BR0001I **************************************************
BR0202I Saving /oracle/PRD/origlogB/log_g14m1.dbf
BR0203I to /dev/rmt/0mn ...
#FILE..... /oracle/PRD/origlogB/log_g14m1.dbf
#SAVED.... log_g14m1.dbf PRDB25/64
BR0280I BRBACKUP time stamp: 2009-05-06 04.27.36
BR0063I 61 of 62 files processed - 120050.449 MB of 120066.277 MB done
BR0204I Percentage done: 99.99%, estimated end time: 4:27
BR0001I **************************************************
BR0202I Saving /oracle/PRD/origlogA/cntrl/cntlrPRD.dbf
BR0203I to /dev/rmt/0mn ...
#FILE..... /oracle/PRD/origlogA/cntrl/cntlrPRD.dbf
#SAVED.... cntlrPRD.dbf PRDB25/65
BR0280I BRBACKUP time stamp: 2009-05-06 04.27.42
BR0063I 62 of 62 files processed - 120066.277 MB of 120066.277 MB done
BR0204I Percentage done: 100.00%, estimated end time: 4:27
BR0001I **************************************************
BR0280I BRBACKUP time stamp: 2009-05-06 04.27.44
BR0304I Starting and opening database instance PRD ...
BR0280I BRBACKUP time stamp: 2009-05-06 04.28.10
BR0305I Start and open of database instance PRD successful
BR0117I ARCHIVE LOG LIST after backup for database instance PRD
Parameter Value
Database log mode Archive Mode
Automatic archival Enabled
Archive destination /oracle/PRD/oraarch/PRDarch
Archive format %t_%s_%r.dbf
Oldest online log sequence 7544
Next log sequence to archive 7547
Current log sequence 7547 SCN: 46814166
Database block size 8192 Thread: 1
Current system change number 46815880 ResetId: 674927195
BR0056I End of database backup: beamxrbx.aft 2009-05-06 04.28.11
BR0280I BRBACKUP time stamp: 2009-05-06 04.28.13
BR0053I BRBACKUP completed successfully with warnings
BR0280I BRBACKUP time stamp: 2009-05-06 04.28.13
BR0291I BRARCHIVE (action ID aeamxrbx) will be started with options '+beamxrbx.aft,42106018475,PRDB25,62 -jid ALGOF20090506040000 -d tape -c force -p initPRD.sap -sd'
BR0280I BRBACKUP time stamp: 2009-05-06 04.31.42
BR0292I Execution of BRARCHIVE (action ID aeamxrbx) finished with return code 0 -
Hi Forum members,
We have a client that has intermittent issues with RDS on a 2012 R2 server.
As an overview of the environment, the client has a single VMWare host support 2 x Windows 2012 R2 VMs one is the File/Print/Email server and the 2nd is the RDS server used to allow the client to run MYOB Enterprise. Both servers have the AD DS role and
DNS roles amongst others.
The 1st issue is that the RD Connection Broker shows the error: "The server pool does not match the RD Connection Brokers that are in it. and then "1. Cannot connect to any of the specified RD Connection Broker servers".
The above issue seems to be caused by the RDMS service not starting. When you attempt to start it, the service stops and the error in the title is logged in the "System" event log. Full transcript below:
Log Name: System
Source: Service Control Manager
Date: 21/01/2015 4:50:32 PM
Event ID: 7024
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: intentionally removed.local
Description:
The Remote Desktop Management service terminated with the following service-specific error: %%2284126209
Event Xml:
<Event xmlns="
<System>
<Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" />
<EventID Qualifiers="49152">7024</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8080000000000000</Keywords>
<TimeCreated SystemTime="2015-01-21T05:50:32.129949400Z" />
<EventRecordID>53721</EventRecordID>
<Correlation />
<Execution ProcessID="568" ThreadID="12436" />
<Channel>System</Channel>
<Computer> intentionally removed.local</Computer>
<Security />
</System>
<EventData>
<Data Name="param1">Remote Desktop Management</Data>
<Data Name="param2">%%2284126209</Data>
<Binary>520044004D0053000000</Binary>
</EventData>
</Event>
In addition in the "Application" event log, the following error is logged:
Log Name: Application
Source: MSSQL$MICROSOFT##WID
Date: 21/01/2015 5:24:47 PM
Event ID: 18456
Task Category: Logon
Level: Information
Keywords: Classic,Audit Failure
User: NETWORK SERVICE
Computer: intentionally removed.local
Description:
Login failed for user 'NT AUTHORITY\NETWORK SERVICE'. Reason: Could not find a login matching the name provided. [CLIENT: <named pipe>]
Event Xml:
<Event xmlns="
<System>
<Provider Name="MSSQL$MICROSOFT##WID" />
<EventID Qualifiers="49152">18456</EventID>
<Level>0</Level>
<Task>4</Task>
<Keywords>0x90000000000000</Keywords>
<TimeCreated SystemTime="2015-01-21T06:24:47.000000000Z" />
<EventRecordID>4228336</EventRecordID>
<Channel>Application</Channel>
<Computer>intentionally removed.local</Computer>
<Security UserID="S-1-5-20" />
</System>
<EventData>
<Data>NT AUTHORITY\NETWORK SERVICE</Data>
<Data> Reason: Could not find a login matching the name provided.</Data>
<Data> [CLIENT: <named pipe>]</Data>
<Binary>184800000E0000001F00000055004E0047004500520045005200410055005300530056005200300033005C004D004900430052004F0053004F0046005400230023005700490044000000070000006D00610073007400650072000000</Binary>
</EventData>
</Event>
I have been attempting to resolve these errors for some time, without success. I have read the many KBs and forum entries related to the above and applied a number of the suggested fixes, including the one which suggests to add the NT SERVICE\ALL SERVICES
to the "Logon as a Service" in the "User Rights Assignment" of the "Default Domain Policy" which is linked to the domain level, that both servers are objects of.
My question to the forum is, can anyone come up with a solution to resolve the above issues and all the RDMS service to start which will then hopefully resolve the broker error?
Regards,
David West.Hi David,
If virtual machines on the server are Windows Server 2012, then it is not supported to install Remote Desktop Connection Broker on a Domain Controller.
More information for you:
Remote Desktop Services role cannot co-exist with AD DS role on Windows Server 2012
http://support.microsoft.com/kb/2799605/de
Guidelines for installing the Remote Desktop Session Host role service on a computer running Windows Server 2012 without the Remote Desktop Connection Broker role service
http://support.microsoft.com/kb/2833839
If the VMs are Windows Server 2012 R2, I suggest you install RDS on a separate machine to see if the issue persists.
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
Apple mobile device service not started
Each time i try to sync my iphone to itunes it keeps on saying "apple mobile device service not started"
I know how to start it and everything its that when i start it it says "Windows could nt start the Aplle Mobile Device service on local computer"
I have the newest itunes and i have windows 7first I would check the event viewer for into about what goes wrong that cause the service to fail
if this don't give a clear image about what the problem is
then I would uninstall itunes and resinstall it
if that didn't help I would ask questions about solve the problem in the itunes for windows forum where people wise in the ways of itunes would be more likely to read your post
https://discussions.apple.com/community/itunes/itunes_for_windows -
Apple mobile device service not started please help
Each time i try to sync my iphone to itunes it keeps on saying "apple mobile device service not started"
I know how to start it and everything its that when i start it it says "Windows could nt start the Aplle Mobile Device service on local computer"
I have the newest itunes and i have windows 7when i start it it says "Windows could nt start the Aplle Mobile Device service on local computer"
Does Windows give you an error code number when AMDS fails to start, Love? If so what number do you you get? -
Oracle distributed document capture service not started
Oracle distributed document capture service not started
and timeoutI did check the Distributed Document Capture Configuration (from the Start menu) and it also indicates that I have selected "Oracle Distributed Document Capture Prompted Login". Once I click "OK" after I supplied all the paths required by server settings, it also displays the error "The username and password could not be validated". What credentials should be entered in the User ID / Password / Domain fields? You should use the username and password entered while configuring the "capture" security model. Leave the domain field blank.
I have not yet configured the IIS at this point. Is it required for the Capture application to authenticate the user I specified during the installation configuration at login? IIS will serve web ODDC interface and will be needed for authentication while accessing ODDC web pages. I beleive that it is not needed for authentication from ODC/ODDC applets. However, when something is not working as expected, I would first finish all required installation and especially post installation setup steps.
I had a look at the IIS configuration in the installation document. It doesn't clearly state which document is the default document for the website one needs to create in IIS. Do you know what it should be? You have to add new web site, say like "Capture" and add virtual directory from assumed path like: C:\Program Files\Oracle\Document Capture\WebPages
For the default document I have WebCapture.asp.
The Oracle Distributed Document Capture service does no start on my PC. Is this required for me to atleast login to the Capture application? It's required only for processing the scanned batches.
I hope that this will help.
Boris
Edited by: tombo on 2012.03.16 06:32 -
i have updated itunes and cannot connect devices - apple mobile device service not started?
Hello there, mikemason5.
The following Knowledge Base article provides some great troubleshooting recommendations:
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
EPMA server service not started
Hi All,
I installed Hyperion 11.1.2.2 Essbase, Planning, EPMA, Calculation Manager, FDM and HFM in the single machine in windows server 2008 R2.
but i am facing two issues.
1. In services, EPMA Server service not started.
2. In FDM, I am getting error in connecting to Essbase.
Error: Unable to retrieve target system data.
Is any thing, i have to install additionally?
Regards,
madyHi,
In Windows Event Viewer i got this message.
Log Name: System
Source: Service Control Manager
Date: 9/3/2012 12:46:12 AM
Event ID: 7011
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: hyperionepm
Description:
A timeout (30000 milliseconds) was reached while waiting for a transaction response from the Parallels Tools Service service.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" />
<EventID Qualifiers="49152">7011</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8080000000000000</Keywords>
<TimeCreated SystemTime="2012-09-03T07:46:12.612304600Z" />
<EventRecordID>70587</EventRecordID>
<Correlation />
<Execution ProcessID="440" ThreadID="16540" />
<Channel>System</Channel>
<Computer>hyperionepm</Computer>
<Security />
</System>
<EventData>
<Data Name="param1">30000</Data>
<Data Name="param2">Parallels Tools Service</Data>
</EventData>
</Event> -
Fix for Apple Mobile Device Services not starting
Finally a fix for Apple Mobile Device Services not starting. Basically I got this from someone else in these forums and it worked. Go to C:\Documents and Settings\AllUsers\Application Data\Apple and delete any file in there that says Apple Mobile Device Services (I understand these are cached files...I had about 8 files to delete). Next go to your control panel, click on Add/Delete programs, find Apple Mobile Device Support and delete (remove) it. Once this is all done do not reboot, rather open itunes and go to Help menu /Check for Updates and update to the latest version. This will install the latest version of iTunes and also a new version of Apple Mobile Device Services. Next reboot and it should work for many of you...it did for me. Open iTunes and plug in your device...good luck. I wrote this from memory so if some of the phrases don't match exactly what you see I apologize. Also, this worked for me on a Windows XP computer.
Thanks for posting this, my iTunes randomly started saying the Apple Mobile Device was stopped, and apple's solutions didn't help. I hope this one will, but what do I do if I have the latest iTunes, so it doesn't update? Wait till they come out with an update? It says I need to run the iTunes installer, but I can't find that. Please help, this is really annoying me...=(
-
Hello, my iphone for several times shows me this message "this iphone can't be used because the Apple Mobile Device service not started".
I need help, because i'm enable do download the new update.
ThanksType "Apple Mobile Device service" into the search bar at the top of this age by "Support" and read the resulting help articles.
-
When trying to sync my iPad to iTunes, I get the message that iPad cannot be used because Apple Mobile Device Service not started.
If you are on a PC then there are instructions here for starting it http://support.apple.com/kb/TS1567 . If you are on a Mac then see this page http://support.apple.com/kb/HT1747
-
I am unable to update to IOS5 from Itunes, says "mobile device services not started". What is this and how do I fix it?
Here is a YouTube video which should guide you through a solution: http://www.youtube.com/watch?v=VLFAo-FWLxE
Maybe you are looking for
-
PLEASE HELP! BB CURVE 8520 EMAIL AND BBM NOT WORKING! :(
Ok, i would really appreciate it if someone could help me with my BB curve. i've tried the shop i bought it from and many other people and all ive been told is to send it away to be fixed. i really need my phone every day and dont want to send it awa
-
How to display success message after Remote service call
Hi , I am currently using Flex form for adding/updating user personal details.On submit button click ,i am submitting details to server by calling RPC remote service.For calling remote service i am using penneframework. On penneframework, Remote serv
-
WD FileUpload api ...
Is there some WD FileUpload api example code to try? Im trying to use the File upload in a WD project but i get "com.sap.tc.webdynpro.services.sal.util.cache.WDResourceNotFoundException: Object could not be found in cache, key is null" I apply all th
-
My hard drive is filling up on its own.
Hello friends, I was surpised to see a message saying that I had ran out of disc space. Yesterday I had 20 gigs of space free on my MacBook Pro running Lion, but somehow within the day it disappeared. I cleared the cache from Safari and Chrome, and r
-
Hi all, I have made a detailed request with some new columns in original reports. But they r not getting displyed. What could be the reason behind this? can someone help me??