SAP Smartforms

Hi All,
In My Smart Form i want to print the date and Amount As per the Ship To Country , i use the SET COUNTRY command but i am not getting that as Per the Country , So please tell me how can i do that .
Thanks
Himanshu Sharma

hi, set the country in the print program..write the date and time to character fields and then pass these fields to the smartform, it will work..
Pls reward with points if u find this useful.
Nivin
Edited by: Nivin Joseph Varkey on Jan 20, 2008 12:56 PM

Similar Messages

How to make use of label printing in sap smartforms

Hi Dear,
How to make use of label printing in sap smartforms.. I need to print four records from internal table into sap smart forms. It will
come as four labels.All page should follow the same procedure... How to do...please help me..
Regards,
Nikhil

Hi,
Please go through below link, would be helpfull for you.
[http://help.sap.com/saphelp_nw04/helpdata/EN/6b/54b4b8cbfb11d2998c0000e83dd9fc/frameset.htm]

Regarding sap smartforms line items

hi,
this is regarding line items in sap smartforms
when i am executing single line item i am getting out put
when i am executing with 2 line items i am getting error like bellow
You tried to switch to the next table column, but no other column exists. The current column is 9. The line type IT_GEN contains only 9 columns.
plz explain clearly

Hi,
if you are using template and the line type is for 1 to 2 lines in the template... make sure that column position you mention is equal to the number of cells in the line type... if the data is displayed in the second row the row position should start from 2 and and column position should lie between 1 and 9.
Just a suggestion ... its better to go with table node instead of going with template...
regards
padma

Need to print SCC-14 and UCC-128 barcodes through SAP Smartforms

Hi all,
I have Two labels to be printed using smart forms.
But in one label the barcode should be of SCC-14 type
and in other the barcode should be of UCC-128 type.
<b>How to print SCC-14 and UCC-128 barcodes through SAP Smartforms?</b>
As standard barcodes do not meet my requirement i have created custom barcodes in transaction se73 of required height and width .
This is as:Se73>System Barcodes>change>Create>New-->:
I have given bar code and short text.
Narrow Module Width &Linear Height&Code128 Mode given default values.
But in this process where can i set the barcode should be of SCC-14.
> I have known that if we give Code128 Mode =
> 'U'-->It is like UCC-128.Is it correct ?
>
> But how can i know for SCC-14 barcode.
>And How many inches is euqal to 1 unit of Narrow Module Width &
How many inches is euqal 1 unit of Linear Height?
Please help me in this regard.It is urgent.
All solutions from you will be fully rewarded.
Thank you in advance.

Hi Rama,
We are working to print Bar codes using Smart forms.
Barcode is printing in label (4*6 Inchs) using printer (Zebra Z4 M PLUS (300 DPI)) (TLP-3842) which supports ZPL Language and Device type is ZLZEB3 (300 DPI).
We are printing bar codes successfully.
But After testing bar code using bar code tester (BC TESTER 4.4) software tool.
The results are failed.
We are expecting results: Like bellow.
Value formatted type is: EAN
Value is [C142007470
Total Description:   420. Ship To-Deliver to Postal Code a Single Postal Authority 07470
Current Situation:
Here we are Created Bar code (Ship to Post) in SE73 with
Bar code type is: Code 128
Width is: 08
Height: 300
Mode is: A    (Even I tried with N and U)
UCC check: Empty.
I added this to character format in my Smart forms.
Text in smart form is: ,,,,<C2>&W_POSTAL_CODE&</>    for P1 Paragraph.
Using this functionality we are able to print a Bar code in Label.
But while testing using BC Tester
Values are showing:
Value formatted type is: EAN
Value is 42007470
Total Description Values: Empty
The Type is EAN is when we select the Manually EAN Radio button (but this not capturing automatically this is problem we are facing).
Even I tried with some changes like bellow:
But Forcefully writing some code in Program lines Smartform:
               concatenate '420' fs_zediu017-pstlz into w_postal_code
After this forcefully adding this Value [C1 in Before W_postal_code Element text :
Text in smart form is:        ,,,,<C2>[C1&W_POSTAL_CODE&</>    for P1 Paragraph.
After this we are tested using BC tester
Every thing is displaying correct Vales which mention above when we manually select the Value formatted type radio button EAN but this Wrong.
Client need when testing bar code using BC TESTER 4.4 it should be display to take EAN radio button and showing all the Values.
Please let me know if you get any idea on this ?
Thanks,
Bathini.

Printing QR-Code barcodes in SAP smartforms

Hi,
Is it possible to print QR-Code barcodes in SAP smartforms using system barcode font? Can anybody please let me know the font settings for QR-Code in SE73 font maintenance?
A sample QR-Code lablel can be found [here|http://images.orkut.com/orkut/albums2/ATUAAADhaahG5MxsqQ66lcSO9oHRWD3X8zh7yv1kEakKwMtVHchChN1WfZlM__2D0_o8H7AS4_UaTTCymQQtvXHb9-q3AJtU9VCWnzkZ4gC1sVnCekVuQ90qmhzeMw.jpg].
Regards,
Milan

Hi Milan,
I'll blog in SDN about my research that I presented at TechEd during session CD119 (blog) but I'll begin sharing with you some ideas.
Basically, without relay on any printer specific driver I would propose to follow the following steps:
1.Generate the QR Code image file (.PNG) with one of the methods presented in the following pages
2.Upload the image into the SAP system
2.1 Convert the generated file (file.png) to TIFF using SAP IGS class CL_IGS_IMAGE_CONVERTER (see GRAPHICS_IGS_IMGCONV_DEMO)
2.2.Upload. Use report RSTXLDMC to upload the image into SE78
3.Include the image into the Form:
3.1.SAPScript/:INCLUDE ZHEX-MARCO-name OBJECT TEXT ID ST
If everything is clear, the missing point should now be the first one. To generate the PNG from ABAP I found some options if you like, the better I think is presented in my open source project called abap2qrcode published here http://code.google.com/p/abap2qrcode/.
I know it's not trivial and I'm curious to know what do you think about it.
Sergio

How i can delete purchase requistion item from sap smartforms

how i can delete purchase requistion item from sap smartforms.

Hello,
Smartforms are printable documents,u cannot delete from smratforms.
U have to handle this in the print program.
Regards

How SAP smartforms are different from Adobe forms

Hi,
Can anyone explain me how SAP smartforms are different from Adobe forms
Tthanks&Regarda
Rama Devi

Hi,
Both are same but adobeforma are advance version of smartforms
for more details check with the following links
Smartforms:
tcode:smartforms
[Smartforms|http://help.sap.com/saphelp_nw04/helpdata/EN/a5/de6838abce021ae10000009b38f842/content.htm]
Adobeforms:
tcode: sfp
[Basics of Adobe|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d4fe7fca-0b01-0010-569a-9a9c1ddf4]
[Adobeforms|http://help.sap.com/saphelp_nw70/helpdata/EN/c8/4adf7ba13c4ac1b4600d4df15f8b84/content.htm]
Hope this helps you.
Regards,
Rajani

SAP Smartforms Font support

Hi,
I would like to know what fonts are supported by standard SAP in Smartforms in 4.6C and where do I look for what is supported and can we use outside Fonts and how do we use them?
Thanks
Ram

Hi,
You can create your own styles in transaction SMARTSTYLES. Then, in your smartform, you have to add the style you have created in the "output options" tab screen of the text elements.
Regards,
Roberto.

Sap smartforms: complex section

i am new to sap abap.i was trying for smartform program.I got one link.. there they have used complex section tab in smartforms which i am unable to find in ECC 6.0. please provide me the what is the alternative method to use the complex section in ECC 6.0

Hi Abapers,
Please tell me how to debug a smartform with simple steps..
Thanks in advance
Moderator Message: Please search for relevant documentation or take a classroom course. Ask only one question in one thread.
Edited by: kishan P on Jan 28, 2011 3:53 PM

How to use radio buttons in sap smartforms

hi,
i saw the radiobutton option in web properties is there any way to display thee radio button in smartforms...
Kindly share ur suggesstions
Thanks in Advance

Hi rsa.Hema,
go to text element (editor) then
change editor
then insert
then characters
then SAP symbols
then choose the symbol for radio button
or use 698 in the change editor screen
Regards.
Saurabh Goel

Importing windows font to SAP - Smartforms

Hi,
How do I import font present in Windows to SAP? My client uses their specific font and I need to import the same font to SAP.
Could someone please help me out?
Regards,
Vimal

hi
first import that font into sap through se78. Then use that in smartform.
try it i hope it will work.
regards
sreelatha gullapalli

Customizing SAP Smartform

Hi,
I need to customize an SAP defined smartform (paycheck). I copied the smartform with Z_ and assigned it to local object. When i activate it, it throws an error saying "The type "/1PYXXFO/SAP_PAYSLIP_US" is unknown. I haven't changed anything. I checked the type in SE11 and it exists. Its in a different package. What should i do now to get rid of that error?. Please help.
Thanks,
Sandeep

hi what is the smartform name u are copuing from ?
is it /1PYXXFO/SAP_PAYSLIP_US"? because in ides i checked this doesnt exist
/1PYXXFO/SAP_PAYSLIP_DE only exists with country extension i dont see a one for US
Do let me know

How do i add new font to sap(smartform)

hi, all!
now, i have one thing to be solved!
i'm using smartforms for developing form program.
i can't find what i want to use new font in sap.
so i added new font to sap using se73 t-code. but some are missing, for example i can't use bold...
so, if anybody have these experience... tell me how to...
best regards,
gy cho.

hi,
For SE73, on screen
There is a button 'True Type-Font Importian'.
On pressing this button you will go to next screen.
Give unique name of font and .ttf file of your computer.
If you select Bold or Italic, select different font file respectivly.
and Execute.
Fonts are centralized for SAP.
if you are not authorized to do cross-client activity, it will not allow you.
Usually Basis Team does this for developers.

Help needed regarding SAP SmartForms

Hi All,
I am looking for some input regarding SmartForms.
We have created SmartForms for the following:
Description
AR Invoice (Correspondence)
Default assignment: SAPScript
AR Credit Note (Correspondence)
Default assignment: SAPScript
AR Dunning Letter (Correspondence)
Default assignment: SAPScript
AP Remittance Advice
Default assignment: SAPScript or PDF
AP Cheque
Default assignment: SAPScript or PDF
In the configuration steps, itu2019s not possible to see the developed forms where as itu2019s active in transaction code smartforms.
· Is this means SmartForms canu2019t be assigned to the above functionalities?
· If possible, how do get listed in the above mentioned configuration step?
Appreciate if you can share your experience.
Thanks in advance.
Regards,
Krishna

Hi Raman,
visit this link
http://help.sap.com/saphelp_nw70/helpdata/en/32/a83942424dac04e10000000a1550b0/content.htm
http://help.sap.com/saphelp_crm40/helpdata/en/c3/69bf4abf1045e0966badb60d6160dd/content.htm
Regards
Anup.

How to print a tickbox in SAP smartform

Dear All,
Can anyone help as to how to print a tickbox in the smartform.
A tickbox is a blank checkbox with a tick in between.
The symbols <697>(Crossed checkbox) and <727>(Blank Checkbox) do not serve my user requirement.
Regards,
Rijuraj

Dear Deepak,
Thanks.This is the closest solution we could get to
[<709>].
With the same line of thinking we can also have,
[<769>]
or
[<799>].
We can also highlight the square brackets to "Bold" if required.
Best Regards,
Rijuraj
Edited by: Rijuraj Raju on Sep 21, 2011 1:00 PM

How to handle the multiple language in SAP Smartform

Hi all!
I need to handle both English and French language for a form in smartform, that form was already maintained in English(EN) language, I need to copy of that form and it should be maintained in two languages(English and French). Anybody can guide me how to do this.
Thanks in advance,
palani.

Hello,
Use transaction SE63, after activate your smartform, to translate.
Regards
Frédéric

SAP Smartforms

Similar Messages

Maybe you are looking for