SAP System Profile directory not being created on windows

I am not SAP Basis person , but am trying to Install SAP Solution Manager 7.0 , IDES ECC 6.0 and SAP PI 7.1 as sandboxes.
{Windows 2003 / Oracle 10}
I am using ORACLE RDBMS 10.2 and its PATCH 10.2.0.4. On trying to install Dialog Instance ( Softeare Life cycle Options > Application Server > Oracle > Dialog Instance, It asks for the profile directory as its seeking the file "default.pfl"
It suggests that its path as
<SAPGLOBAHOST>\sapmnt\<SAPSID>\SYS\profile
However default.pfl file exists no where on my computer , and more imortantly the shared folder sapmnt does not even exist on my system.
Can you please tell me what I am doing wrong Am I doing a wrong installation right at the RDBMS instalation stage ? I also tried to install ECC 6.0 as it seemed to have the same RDBMS base files . However in ECC 6.0 installation I encounted the same issue.
Thanks in advance
rishi

Hi,
First thing is that you have to go through the master guide and the installation guide to understand the systems in SAP before starting the installation.
The issue here is that you have no idea of a dialog instance and trying to install that without a central instance in place.
I would suggest you to go through the master and installation guides and understand the different systems and fulfil all the recommended prerequisites and then start installing the SAP systems.
Regards,
Varadharajan M

Similar Messages

User Profile Disk not being created

Hi,
I created a new 2012 VDI collection. Things seems to be working fine except for the User Profile Disks are not being created. From my understanding a .vhdx prefixed with the user's SID is supposed to be created when the user logs into one of the virtual
machines from the collection. I can see that a UVHD-template.vhdx" was created correctly but when logging on to one of the deployed virtual machines from the pool there is no other .vhdx files (except the template).
From what I've read the virtualization hosts must have write access to the share (they do). I can't seem to find any other requirements. I've searched through event viewer and found nothing. I'm not sure which logs to check on which server.
Anyone have any ideas what I'm missing?

Hi,
Thanks for your post in Windows Server Forum.
Kindly follow the below mention article and check the necessary steps for creating UPD, try to create new UPD.
1. Working with User Profile Disks on Session-Based Desktop Deployments
2. Easier User Data Management with User Profile Disks in Windows Server 2012
Hope it helps!
Thanks,
Dharmesh

User Home Directory not being created when "Create Home Now" button hit...

This is a cross post, since I was not sure where this should end up since it touches two pieces- Open Directory and User Management. Any help would be appreciated!
I am running OS X Server 10.5. All of my user accounts have been migrated over along with their home directories. Problem is that when creating new users and then assiging a home directory the system does not actually create the directory.
Currently all users are setup to have their home directory setup here:
afp://172.16.110.100/Users/'username'. The Users folder has been setup to automount, and all users that have folders can be accessed without issue.
The problem is when I create a new user, select the aft://172.16.110.100/Users option and then select "Create Home Now" button and save as it requests... it does not create the directories.
I have even tried to change the Home patch to make it local to see if it was an network issue, and used the /Users choice and it will not create the directory in that way either- both location go to the same place.
The system was obviously able to create the local admin account and directory admin account home folders without issue when the system was installed.
The permissions for the "Users" folder are as follow:
directory admin = Read and Write
local admin= Read and Write
system user (root)= Read and Write
admin group= Read Only
everyone group= Read Only
The system is in production, so any kind of server resets need to be done after 5pm, so I have not been able to reset AFP service.
Currently the only services running are AFP, SMB and Open Directory.
All users have their entire home directories located on the server, and login over Directory Access on their clients, so all user accounts are stored on the server. No one is having issues accessing their files or logging in.
I just can not create new home directories when I create new accounts.

You do not have to be logged on as the root user to do this. Launch the terminal and type-
sudo createhomedir -a
I run an XServe with Tiger server ( 10.4.11) and this has been the workaround I have been using.
Good luck.

Inbox folders not being created from msf files

Last week, I noticed that my Inbox folder files weren't appearing in my profile. I posted a generalized question here: https://support.mozilla.org/en-US/questions/996903
The response I received didn't help that much. The folder I created appeared on the remote mailbox as empty folders.
My mail account is synced via IMAP to a remote Zimbra mail client using STARTTLS. I can view my Inbox. The other folders in my Inbox account are not visible. I can send and recieve messages from my INBOX.
When I select "Manage folder Subscriptions" In the account options, I can see the folders. When I select them, and click the "Subscribe" button, nothing happens.
Inspecting my IMAP directory, I see the following structure:
~/.thunderbird/13zr0oo0.default/ImapMail/mail.<zimbra_account>.com:
-rw-r--r-- 1 matthewe matthewe 1238 May 2 10:38 Archives.msf
-rw-r--r-- 1 matthewe matthewe 1235 May 2 10:38 Drafts.msf
-rw------- 1 matthewe matthewe 47500385 May 2 09:56 INBOX
-rw-r--r-- 1 matthewe matthewe 375885 May 2 10:36 INBOX.msf
-rw-r--r-- 1 matthewe matthewe 25 May 2 08:58 msgFilterRules.dat
-rw-r--r-- 1 matthewe matthewe 1233 May 2 10:38 Sent.msf
-rw-r--r-- 1 matthewe matthewe 0 May 2 10:38 site-errors.msf
-rw-r--r-- 1 matthewe matthewe 0 May 2 09:59 Templates.msf
-rw-r--r-- 1 matthewe matthewe 2275 May 2 10:33 Trash.msf
The msf files are created when I click the "Subscribe" button but subsequent Mail files containing the mail data are not (note that non-msf files exist only for "INBOX".)
Removing .msf files and restarting Thunderbird has no affect.
When I launch, the errors console reports the following three errors:
"Could not read chrome manifest 'file:///usr/lib/thunderbird/extensions/%7B972ce4c6-7e08-4474-a285-3208198ce6fd%7D/chrome.manifest'.
-- There is no chrome.manifest file in my filesystem under /usr/lib/thunderbird/extensions/{972ce4c6-7e08-4474-a285-3208198ce6fd}"
"While creating services from category 'profile-after-change', could not create service for entry 'Disk Space Watcher Service', contract ID '@mozilla.org/toolkit/disk-space-watcher;1'"
This is reported as https://bugzilla.mozilla.org/show_bug.cgi?id=883621 and has been resolved at https://bugzilla.mozilla.org/show_bug.cgi?id=895964 but my system still throws the error. (I have plenty of disk space. Permissions perhaps?)
[JavaScript Warning: "Calendar https://mail.zimbrahostedemail.com/home/matthewe@<zimbra_client>.com/Calendar has a dangling E-Mail identity configured."]
I'm not sure what that means.
I am using Thunderbird 24.5.0 on Ubuntu 13.10

Is your question about files not being created, or because you cannot send and receive mail, or both?

System Landscape directory not available error,

I am still a beginner, and I am having some slight trouble understanding, what tools would be needed, and how to install. I am using the forums.
We have the MII Discovery Server up and running.
NWDS Server installation is done.
We have the MII track ready to be used for Development(SLD URL is available) , Userid and password available
I am working on installing the NWDS 7.3 Developer Workspace.
Would I also need to do NWDS Server install on my laptop?
Would these steps be sufficient?
1. Download and install JDK 1.6
2. Copy the file nwds-extsoa-7.3-SP00-PAT0000-win32.zip from:
<your download location>\51039309\DATA_UNITS\JAVA_IDE\distros\com.sap.netweaver.developerstudio.distribution.complete.extsoa\8.30.0.101020102100
to a convenient folder.
3. Extract the content and you will have a folder with name eclipse.
4. Launch the Netweaver Developer Studio from folder eclipse, you may want to create a shortcut on the Desktop.
5. If you haven't maintained JAVA_HOME property or if it's pointing to some other java version, eclipse will complain about it. In the dialog window locate the JDK 1.6 installation. Path to JDK 1.6 should be something like
C:\Program Files\Java\jdk1.6.0_25\bin
6. Restart the NWDS after this and select a suitable workspace.
7. Set the run time engine in NWDS, by going through the menu path:
Window->Preferences->SAP AS JAVA
Question:
1. I am unable to Set the run time engine in NWDS, please could you give me details steps with what I would need to enter for Instance Hostname and Instance Number...etc
2. As part of Development installation do I have to Modifying the Logon Page? Do I have to go thru the Server installation in order to start developing on eclipse environment?
I do not have the war file. How do i Copy the war file tcsecumelogonui.war from
<Installation drive>:\usr\sap\<SID>\J00\j2ee\cluster\apps\sap.com\com.sap.security.core.logon\servlet_jsp\logon_ui_resources\tcsecumelogonui.war
3. System Landscape directory not available error,
In the Component Browser when I right click and select New u2013 Development Configuration u2013 Import From System Landscape Directory (SLD) u2013 Next (Enter UserID and Password)
Thank you

Hello,
For the SLD error, please, configure SLD following as per this docuemtnation:
http://help.sap.com/saphelp_nw04/helpdata/EN/bb/c2b6421a75da11e10000000a155106/frameset.htm
Regarding the settings to enter NWDS to connect to AS Java, you have to enter the java instance data so that NWDS can connect to it in order to make deployments, etc....
Please, see also the following documentation that explains stp by step how to work with NWDS.
http://help.sap.com/saphelp_nw04/helpdata/en/fe/a3996fa314f94f8a0c3475b08636d0/frameset.htm
I hope this helps you.
Regards,
Blanca

SAP System Landscape Directory (SLD) Privileges

Hello everyone,
I'm not really sure if this is the correct place to start this discussion, but any help and support is really appreciated.
The question is as follows: is it possible to define object privileges in SLD such as Products, Software Component Versions, Technical Systems and Business System for example, to define which user can modify a Technical System? I assume there's is a way by role and groups on the UME to define privileges to display or modify objects in whole SLD, but I don't know if on a lower level this is possible.
thanks in advance for help and support.
Regards,
Julio Cesar

Hello Julio,
I am not sure if you can define certain UME actions for objects within the SLD. These objects are usually maintained by a SLD administrator. There is however a way to create a new UME role and assign new SLD action to it.
In your Web browser, enter the URL of the Identity Management using the following format:http://<host>:<port>/useradmin .
Create user groups and UME roles of your choice and assign each UME role to the appropriate user group(s) as well as to the UME action(s). You can use the predefined UME roles as a template so create your own UME roles (as descibed in the table above).
If you want to create a UME role for SLD content synchronization or for SLD administration, you need to assign the Destination_Service_Write_Permission UME action, which belongs to thetc~sec~destinations~service service, to your own UME role.
For more information about which UME actions there are available I suggest to use the following site:
Configuring SLD Security Roles - Security Guide for the SAP System Landscape Directory - SAP Library

CcmEval Scheduled task not being created with "Access Denied" error 0x80070005 only on XP machines

Before coming on here I checked out http://social.technet.microsoft.com/Forums/en-US/ddbfe6c3-ee54-4b2a-a3a7-a6515d974f76/client-check-failed-on-xpserver-2003-systems-onlyccmeval-is-not-being-scheduled?forum=configmanagerdeployment (GPO
to allow scheduled tasks by users) and another thread about a hotfix that seems to be pre-XP SP3 and pre-CM 2012 R2.
That said, I'm having an issue many seem to have, but I can't find the answer. From what I understand SCCM uses the user context to create the CcmEval task, but in XP users cannot set a task to run as any other user (ie SYSTEM in this instance) so what is
the workaround? I can't just give users Administrator permissions to install the client.
The exact log entries are:
<![LOG[Client evaluation task doesn't exist.]LOG]!><time="19:05:43.548+360" date="12-14-2013" component="CcmEvalTask" context="" type="2" thread="4356" file="ccmevalcheck.cpp:705">
<![LOG[Client evaluation task is not found or is disabled or is not compliant, perform remediation]LOG]!><time="19:05:43.548+360" date="12-14-2013" component="CcmEvalTask" context="" type="2"
thread="4356" file="ccmevalcheck.cpp:341">
<![LOG[Attempting to recreate client evaluation task.]LOG]!><time="19:05:43.548+360" date="12-14-2013" component="CcmEvalTask" context="" type="1" thread="4356" file="ccmevalcheck.cpp:833">
<![LOG[Task scheduler 2.0 is not supported, peform task registration with 1.0 API.]LOG]!><time="19:05:43.548+360" date="12-14-2013" component="CcmEvalTask" context="" type="1" thread="4356"
file="ccmevaltask.cpp:345">
<![LOG[Failed to delete task Configuration Manager Health Evaluation (0x80070002).]LOG]!><time="19:05:43.548+360" date="12-14-2013" component="CcmEvalTask" context="" type="2" thread="4356"
file="ccmevaltask.cpp:379">
<![LOG[Failed to create task item (0x80070005).]LOG]!><time="19:05:43.548+360" date="12-14-2013" component="CcmEvalTask" context="" type="3" thread="4356" file="ccmevaltask.cpp:387">
<![LOG[Failed to create client evaluation task.]LOG]!><time="19:05:43.548+360" date="12-14-2013" component="CcmEvalTask" context="" type="2" thread="4356" file="ccmevalcheck.cpp:850">
The bolded section is what's telling me it's Access Denied, and manual creation of any program task set to run as SYSTEM tells me the same- users cannot do this; only admins can.
What can I do?

So after sifting through some RSOP results and GPO objects I found a policy that wasn't necessarily prohibiting creation of them. (Not where you think it would be - under
Administrative Templates > Windows Components > Task Scheduler > "Prohibit New Task Creation" -
this was set to allow them) but this one I found was a File Permissions policy that set SYSTEM permissions to READ and EXECUTE.
I've changed this to FULL CONTROL for SYSTEM. I'm unable to get on the machines to examine everything closely, but from what I can see at least one of them has remediated themselves and now has a successful client check in the console. Hopefully the rest
of them will come around as GP updates itself and the client does an evaluation to remediate the Scheduled Task.
Hopefully this helps someone in the future as well.

XMP files not being created with DNGs...

I'm used to using Bridge with ACR to process Nikon NEFs. But a recent camera update has me experimenting with converting the D3's NEFs to DNG files and editing them with CS2 and Bridge 1.04 which works better on my system. I've also experimented with CS3 and Bridge 2.1.1.9 with the same DNG files.
In both cases XMP files are not being created when working with DNG files. I have enabled "Save image settings in : Sidecar ".xmp" files" turned ON. But they do not seem to be generated and I assume the ACR adjustments are being embedded in the DNG file. Meanwhile doing edits on NEF files continues to create .xmp files as expected.
I find .xmp files to be very useful and I'm wondering why they're missing with DNG files? Are they hiding somewhere other than in the same folder that the images reside in?
Thanks.
Russell

> The information contained in the XMP file is stored in the DNG file so there is no need for a separate file.
Aww, yuck!! That's a real drag...
When editing lots of files (yesterday's shoot produced 8GB) I back everything up to off-line storage and then, after doing all my edits and crops in ACR, I only have to copy over the small XMP files which takes no time at all.
So if I re-edit the DNG with ACR I have to re-copy ALL the files again to the off-line storage.
I used to sometimes even save 2 versions of the xmp files when I needed 2 different crops of the same images, such as doing a wide screen 'cinema' crop for a corporate client's Intranet presentation of their event, as well as more standard crops to be used for their newsletters.
Guess I won't be using DNG any more..
Thanks for the help Kees :-)
Russell

Class not being created when running from jar

Hi all,
Tech info first:
IDE: Sun Java Studio Enterprise 8
Plaform: windows xp
I have created a Swing app, that connects to a com port(using the RXTXcomm). now, when I run the app in the IDE, everything is fine and dandy, but, when I run the jar file, the application loads, but the class in the app which deals with the com port is not created. here is the code:
    private static void createAndShowGUI() {
        //Make sure we have nice window decorations.
        JFrame.setDefaultLookAndFeelDecorated(true);
        Main receiver = new Main();
        receiver.getPropertiesFromFile();
        //Create and set up the window.
        frame = new JFrame("R�FILOG RFID Empf�nger");
        frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        frame.setContentPane(receiver.mainPanel);
        frame.setJMenuBar(receiver.createMenuBar());
        frame.addWindowListener(receiver);
        frame.setLocationByPlatform(true);
        //Display the window.
        frame.pack();
        frame.setVisible(true);
        portListener = new RFIDReaderComm(receiver, "COM3");
        portListener.getConfiguration();
    public static void main(String[] args) {
        //Schedule a job for the event-dispatching thread:
        //creating and showing this application's GUI.
        javax.swing.SwingUtilities.invokeLater(new Runnable() {
            public void run() {
                createAndShowGUI();
portListener in the createAndShowGUI() function is an interface level parameter and is the class that is not being created. There is no error message.
If I move the two lines that deal with the port listener before the frame.pack() line, then the GUI is not even loaded, and when I view the processes in the task manager, the process starts and then quits without anything becoming visible. So from this I guess there is a problem with creating the class when running from a jar, but without any error messages, I have not a clue where to start...can anyone help?
thanks in advance.

Well, some more info, so maybe someone can come up with some tips for me...this is really important, and any help is greatly appreciated.
This is obviously a classpath problem. After running the my jar file with java -jar I finally got the error NoClassDefFoundError
Kind of obvious I suppose. But, I cannot seem to get the two jar files I need into the classpath. I have tried the following:
Updating my computers CLASSPATH with the relevant paths - not working
Trying to get the Sun Java Studio Enterprise to build the required jar files into the final package - cannot get this to work
Tried updating the manifest.mf in the following way:
Created a text file Manifest.txt with the lines:
Class-Path: RXTXcomm.jar
Class-Path: BrowserLauncher2-10rc4.jar
ran the command (in the same directory as Manifest.txt):
jar cfm RUFILOGScanner.jar Manifest.txt classes/*.class
but this does not work either. When I run: jar tf RUFILOGScanner.jar all I get is:
META-INF/
META-INF/MANIFEST.MF
classes/
classes/CRCCalculator.class
classes/Main$1.class
classes/Main.class
classes/RFIDReaderComm.class
classes/URLDialog$1.class
classes/URLDialog$2.class
classes/URLDialog.class
the classes I want added are not there. Plus, (I think this is because I am running SE8) the manifest.mf is not in a folder called META-INF. In fact, I have no folder called META-INF. Is this significant?
Please, can anyone help me?

Collaboration Area is not being create while 2 envelop RFx Creation by Purchaser

HI,
Collaboration Area is not being create while 2 envelop RFx Creation by Purchaser hence Default folders (External Area/Internal Area ) are not appearing :
Following roles are assigned to Purchaser on ECC System :SAP_CFX_USER, /SAPSRM/ST_PURCHASER
Following roles are assigned to Purchaser on cfolder System :SAP_CFX_USER
Following roles are assigned to RFC User on ECC System :
SAP_CFX_ADMINISTRATOR
SAP_CFX_COL_CREATOR
SAP_CFX_COMP_CREATOR
SAP_CFX_USER
What could be the other root cause for this bug ?

@@Version : ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Microsoft SQL Server 2012 - 11.0.5058.0 (X64)
   May 14 2014 18:34:29
   Copyright (c) Microsoft Corporation
   Developer Edition (64-bit) on Windows NT 6.2 <X64> (Build 9200: ) (Hypervisor)
(1 row(s) affected)
Compatibility level is set to 110 .
One of the limitation states - XML columns with a depth of more than 128 nested nodes
How do i verify this ? Thanks .
Rajkumar Yelugu

IPod shows up in system profiler but not in /dev and disk utility

Hi,
I have a Problem with my iPod. It works perfectly when I connect it to other macs.
Though on my mac it appears only in the system profiler, but not in itunes, /dev or diskutilities. Other USB devices are working correctly.
I already reseted my ipod but this doesn't solve the problem. Neither did the update of the iPod firmware.
Does somebody know this Problem? What can I try to solve it?
Thanks.
About my iPod:
It's an iPod Touch, system Profiler is telling:
Version:          0.01
Bus Power (mA):          500
Speed:          Up to 480 Mb/sec
Manufacturer:          Apple Inc.
Product ID:          0x1293
Serial Number:
Vendor ID:          0x05ac (Apple Computer, Inc.)
iTunes says:
serial number: 910952nua75j
Running the system 4.2.1
About my Mac:
It's a MacBook Pro, 2,16 GHz Intel Core 2 Duo, running 10.4.11

I'm pretty upset. It seems that the only solution to this problem is to buy some new mac products!
I have Applications on my computer that will not work on a new system and I don't want to update my system + all expensive apps just because my ipod refuse to downgrade.
I used to be a mac fan and I still like it, but this kind of "tricks" are unacceptable. I bought an ipod because I didn't want to spend time on fixing some stupid problems and now I already spent weeks trying to make my expensive ipod work on my mac (and all this because of a stupid firmware problem). I am now really disapointed.
So if anyone should have an idea on if it's possible to downgrade my ipod (or other solution?) in order to make it work again with my system, please post it here. Thanks.

Item Texts Is Not Being Created in BAPI_BILLINGDOC_CREATEMULTIPLE

Hi.
I am Using Bapi TO Create Invoice, Every thing is created successfully , but item text is not being created. Code is as below.
DATA: s_vbap TYPE vbap,
            t_billing TYPE STANDARD TABLE OF bapivbrk WITH HEADER LINE,
            t_datain TYPE STANDARD TABLE OF bapikomfktx WITH HEADER LINE,
            t_return TYPE STANDARD TABLE OF bapireturn1 WITH HEADER LINE,
            t_success TYPE STANDARD TABLE OF bapivbrksuccess WITH HEADER LINE.
      SELECT SINGLE * FROM likp
      WHERE vbeln = v_del_doc_no.
      SELECT SINGLE * FROM lips WHERE
      vbeln = v_del_doc_no.
      t_billing-salesorg = likp-vkorg.
      t_billing-ref_doc = likp-vbeln.
      t_billing-ref_item = lips-posnr.
      t_billing-doc_number = v_del_doc_no.
      t_billing-itm_number = lips-posnr.
*      SELECT SINGLE fkarv FROM tvak
*            INTO t_billing-ordbilltyp
*            WHERE auart EQ zsoa_so_header-auart.
      SELECT SINGLE auart FROM vbak
                  INTO t_billing-ordbilltyp
                  WHERE vbeln EQ order_num.
      t_billing-price_date = sy-datum.
      t_billing-ref_doc_ca = likp-vbtyp.
      t_billing-material = lips-matnr.
      t_billing-plant = lips-werks.
      APPEND t_billing.
      BREAK-POINT.
      CLEAR: t_datain.
     t_datain-ref_doc = v_del_doc_no.
      t_datain-ref_item = '000010'.
      t_datain-applobject = 'VBBP'.
      t_datain-text_id    = '0001'.
      t_datain-langu      = sy-langu.
      t_datain-format_col = '*'.
      t_datain-text_line = 'FSG 2829'.
      APPEND t_datain.
      CALL FUNCTION 'BAPI_BILLINGDOC_CREATEMULTIPLE'
        TABLES
          billingdatain = t_billing
          textdatain    = t_datain
          return        = t_return
          success       = t_success.
      CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
        EXPORTING
          wait = 'X'.
      LOOP AT t_return.
        itab_msg-type = t_return-type.
        itab_msg-msg = t_return-message.
        APPEND itab_msg.
        CLEAR itab_msg.
      ENDLOOP.
      READ TABLE t_success INDEX 1.
      p_i_bill_doc = t_success-bill_doc.
    ENDIF.
ENDIF.
CLEAR: itab_so_items, itab_so_items[] , delivery_no , itab_return[].
So Text FSG 2829 is not being created in Item Text.....

Hi Tahir,
You can check with the below thread
A question of BAPI_BILLINGDOC_CREATEMULTIPLE
Regards,
Pawan

Group Folders not being created

Hi folks,
i think this is a simple question: i got Mac OS X 10.4.4 Server with OD and Mobile Homes configured. I set up some custom Groups but the Group Folders are not being created automatically. I think there is a terminal command to do this. Does anyone know that command?
Greets

Is it the CreateGroupFolder command?
(15297)

Itunes 11 shows zero photos in Aperture and ApertureData.xml not being created in library

I've tried to do some trouble shooting of this problem. I've rebuilt permissions, I've repaired and rebuilt the Aperture library, I've made sure sharing previews is always for iLife and iWork, I've created a new library, switched to it and switched back and I can't get iTunes to see my albums and pictures from my iPhoto library when I try to sync through Aperture. What I have found is when I created the new temporary library and loaded one pic into it, a file in the package contents called ApertureData.xml is created, which isn't created in the iPhoto libary, it has AlbumData.xml. iTunes does recognize the temp library and photo. I deleted the AlbumData.xml, but it was just recreated. It seems Aperture is supposed to be creating a file that it isn't. Any help would be appreciated, I'm trying to migrate from iPhoto to using Aperture exclusively to manage photos and sync with devices. All software is up to date. Thanks.

in case anyone searches and finds this question, but importing by iphoto library to aperture into a new library, I fixed the problem. I do not know how to fix the original issue of the aperturedata.xml not being created in the origianl iphoto library.

Parser Error Message: It is an error to use a section registered as allowDefinition='MachineToApplication' beyond application level. This error can be caused by a virtual directory not being configured as an application in IIS.

I've copied a .NET application from an older 2008 server running IIS 7.0.600.16386 to a newer 2008 R2 server running 7.5.7600.16385. The .NET framework version is 4.0.30319. I've setup an application pool and copied the wwwroot directory.
I've checked for nested web.config files and I've been reading a lot about converting the site to an application. The older server running the application is still up and running and the configurations look identical. If I convert the site to an
application the icon changes and doesn't look like it does on the old server. I'm new and still learning the basics of programming and publishing applications. Can someone point me in the right direction? I've been on google for a few days
to no avail. Thanks.
Description:
An error occurred during the processing of a configuration file required to
service this request. Please review the specific error details below and modify
your configuration file appropriately.
Parser Error Message: It
is an error to use a section registered as
allowDefinition='MachineToApplication' beyond application level. This error can
be caused by a virtual directory not being configured as an application in IIS.
Line 20:       <add path="Telerik.Web.UI.DialogHandler.aspx" type="Telerik.Web.UI.DialogHandler" verb="*" validate="false" />
Line 21:     </httpHandlers>
Line 22:     <authentication mode="Forms">
Line 23:       <forms cookieless="UseCookies" loginUrl="~/AccessDenied.aspx" protection="All" name="TVHRFORMAUTH" timeout="180" slidingExpiration="true" />
Line 24:     </authentication>

Hi,
I agree with Tim that we can ask for better help in the following IIS forum.
IIS.NET forum
http://forums.iis.net/
Best regards,
Frank Shen

SAP System Profile directory not being created on windows

Similar Messages

Maybe you are looking for