SAP Webdispatcher for multiple SAP systems

Hello friends,
I need some info on SAP web dispatcher configuration for mutliple SAP Systems (different SIDs).
Is it require to install & configure multiple web dispatchers for mutliple SAP Systems (different SIDs)? If it so, what would be the steps and provied me some links
regards
Anand.M

> ... what would be the steps and provied me some links
This you can do on your own, using the search --> then ask more detailed questions.
> Total Questions: 6 (6 unresolved)
This you should also do on your own --> Follow up on questions you have asked.
Please read the forum rules if you have not done so yet.
Cheers,
Julius

Similar Messages

Installing data quality management for sap for multiple sap system

Hello folks,
I have an Requirement where i need to install data quality management for sap in multiple sap system.
I have installed it successfully for one system .
here my data services is installed in one server with rfc server as windows services in same server.
i have done the required configuration in ecc side.
my question is how do i use same data services jobs which are configured as real time services for both my sap connection?
in simple terms how do i installed dqm for multiple sap system having single data services server.
thanks,
Shubhangi.

Hi Vishal,
Regarding DQM Please refer the below Link.
Links:
http://scn.sap.com/community/data-services/blog/2013/07/18/i-installed-dqm-for-sap-you-can-too
or you can also refer below SNotes given by SAP:
1732816 - How to manually import DQM ATL files correctly after failed install
Note 1732816 - DQM Adapter Dataflow installer fails on Data Services 4.1
Links:
https://service.sap.com/sap/support/notes/1732816
Thanks,
Daya

Make IT0105 accept same SAP userID for multiple PERNR

hi,
How do i make IT0105 accpet multiple SAP UserId for multiple PERNR for a single PERSON ID. this has to be done for a Concurrent Employee landscape.
All PERNRs of a single PERSON ID should have same userid in 0105. How do i copy uname for all PERNR.
ags.

Hi,
This is a standard control.
System checks the value MAIL SAPSY in table T77S0 and for that specific subtype of 0105 does not allow multiple entries.
Changing the value in T77S0 - as indicated in its help - would harm your system and is not recommended.
Regards,
Dilek

Find exact RFC Destination for Multiple backend Systems In SAP Gateway

Hi Gateway developers,
I have requirement,if gateway hub system has multiple backend systems( for example two backend systems: ECC and SRM ) then how hub system can get the suitable backend alias for exact entity collection..
Here i have developed two entities one entity regards: ECC and second one regards SRM system..within this when I run the service it is always taking any of the same alias for both the collections..
Can you please suggest me..
Thanks
Sreenivas Pachva

Hi Srinivas,
You can add the respective system Alias Name: Like logical system name in your URI also.
Example:
/sap/Service Name;mo=ECCCLNT210/zentity1?Customer1='0001'
/sap/Service Name;mo=SRMCLNT400/zentity2?Customer2='ABCD'
May this help you.
Thanks,
Saurabh Gupta

Single Web Dispatcher for Multiple SAP Systems

Having read a number of posts & S-Notes, I found that Web Dispatcher 7.2 is capable of routing between multiple SAP instances.
But despite having troubleshooted, I am unable to make it work. I have two separate installations ERP & Portal on the same host, but my web dispatcher only routes to one of them at the same time. Simultaneous access to these 2 systems is not possible either with URL or Port control procedure mentioned at url http://help.sap.com/saphelp_nw72/helpdata/en/c5/ec466f5544409982c7d3ca29ce1ad3/frameset.htm
Can anyone point an error in my below mentioned configuration of web dispatcher file.
I want requests on port 8853 of my web-dispatcher to be routed to system DEV &
the requests on port 8843 of my web-dispatcher to be routed to system DEP
rdisp/mshost = sapdeverp
ms/http_port = 8100
icm/server_port_0 = PROT=HTTP,PORT=8853
icm/server_port_1 = PROT=HTTP,PORT=8843
wdisp/system_0 = SID=DEV, MSHOST=sapdeverp, MSPORT=8100, SRCSRV=*:8853
wdisp/system_1 = SID=DEP, MSHOST=sapdeverp, MSPORT=8102, SRCSRV=*:8843
Can we mention multiple message servers instead of single message server "rdisp/mshost = sapdeverp
ms/http_port = 8100" ?
Any suggestions ?

Very right in mentioning this point coz myself have been confused over it but if I remove these lines & execute the -checkconfig:
then it states as below:
Checking SAP Web Dispatcher Configuration
=========================================
maximum number of sockets supported on this host: 8192
Server info will be retrieved from host: : with protocol: http
Checking connection to message server...
ERROR: Connection to message server failed: NIESERV_UNKNOWN
Check ended with 1 errors, 0 warnings
More over accessing the servers give the following error:"
500 Dispatching Error
Error: -26
Version: 7000
Component: HTTP_ROUTE
Date/Time: Mon Nov 29 17:28:11 2010
Module: http_route.c
Line: 3139
Server: solomon__03
Error Tag:
Detail: no valid destination server available for '!ALL' rc=13
I have tried this actually, even tried the option ms/server_port_0 & 1 to replace ms/http_port but it didnt work either.
Any more ideas.. ?

Compliance Calibrator for multiple SAP systems

I was wondering if anyone could assist me with my query. We are currently performing an implementation of Virsa CC for a client and have begun to configure a CC DEV system they have installed with their custom SoD rule set. The DEV CC system (sitting on a stand alone NetWeaver box) is "connected" to four SAP systems (DEV, QA, HR DEV & HR QA). When we are building "functions" (i.e. raise purchase orders) in CC it asks us to define a SAP system when we are entering the transaction codes. We've been configuring the functions with SAP DEV as the system, however when we run the analysis of results we would like to get results from QA as well. It appears that the risk analysis only works for the system that you have defined the functions in (i.e. we get results for users in DEV but not for users in QA).
My questions are as follows:
- Do you need to define all the systems you wish to run a risk analysis for within the function (i.e. function = Raise purchase orders. DEV ME21 & QA ME21)?
- If so, is there an easy way to convert our functions so that they point to QA as well (we've noticed that we can't edit the SAP system once the function is saved)?
- Is it possible to export the functions and then define the SAP system when importing them back into CC (we've noticed with the SAP delivered rule set that SAP DEV was automatically defaulted)? This is particularly relevant as we would like to export the rules from the DEV CC system and import them to the PROD CC system without having to manually create the rule set again; and
- Is it possible to export the rules and manually change the SAP system reference and import them back into CC (i.e. do a "replace all" DEV to QA)?
Any help would be greatly appreciated.
Thanks,
Alexi

In order to perform what your are trying to do in CC 5.2, you will need to go to configuration and setup a logical system, such as SAP R/3 and define all the appropriate systems for the logical system. Then, when modifying the functions, you will need to set the tcode (action) to the logical system defined, such as R/3 or APO, etc.
The cross-system functionality only comes into play if you want to analyze the SOD where a conflict would occur if a user had access to one function in one system (for example - purchase order processing in APO) and a conflicting function in a different system (for example - Vendor Master in R/3).
If you simply want to check who has violates a risk against multiple system - the logical system is the best way. You can have an logical system by system type - R/3, BW, APO, SRM, etc.
To convert this over, you can export the rules and during the export you have to define the new system when exporting the file. If that doesn't work, I'd just delete everything out, and use the upload files to reload the rules with the correct data.

Single ADS for multiple SAP systems ?

Can a single ADS installed in a JAVA stack possibly along a EP 7.0 serve multiple SAP systems in my landscape. We got ECC 6.0, EP 7.0, BI 7.0, SRM 5 etc in our landscape. I was wondering whether I can install ADS on any of these systems with Java stack and leverage the functionality to other SAP system or should I have ADS on all the Systems ?
Help appreciated
Thanks

We are using one ADS for more than 10 systems in our product development. It works fine.

Use sap webdispatcher with multiple hosts

I need to support 2 different senerios with our SAP Webdispatcher. I need to have some users accessing services on our backend ECC system using SSL between the SAP Web Dispatcher and the client. I have another group of users that need to use a different URL that does not need to use SSL. Do I need to run 2 separate instances of SAP Webdispatcher or can I configue one to handle both accesses?

Are all the users accessing the same back end system? If they are, you should be able to do it with one dispatcher. You would just need to configure two ports in the <SID>_Wxx_hostname profile, e.g.:
icm/server_port_0 = PROT=HTTP,PORT=80
icm/server_port_1 = PROT=ROUTER,PORT=443
This will route users to who connect to the web dispatcher on port 80 to the backend system via HTTP, and users who connect to the web dispatcher on port 443 will be routed to the backend system via HTTPS (Using end-to-end ssl).
If you're trying to route users to different back end systems, I think you will need multiple web dispatchers. As far as I know, a web dispatcher will only load balance users over a single system. But I'm not 100% on that, so maybe somebody else knows for sure.
Hope this helps,
Glenn

Printing sap script for multiple customers

Hi,
I have a requiremnt to print the form for multiple customers. How should i use the sap script function modules? i.e. in which sequence?
for example customer A has 5 pages. customer B has 4 pages.
after printing 5 pages of the customer A, it should print 4 pages of the customer B.
regards,
CK

To print accroding to your requirment you should modify your driver program like this...
Sort <Internal table by KUNNR.
LOOP AT <internal table>
AT NEW KUNNR. "Customer..
**Call Function module OPEN_FORM
END AT.
AT END OF KUNNR.
***Call function CLOSE_FORM
ENDAT.
***Call all your Write_FORM
ENDLOOP.
Regards,
SaiRam

SAP GUI for 64 bit system

HI Guys,
I have 64 bit system and I need GUI compatible with it.
Where to download it from the market place.. ?
Thanks

Hi,
You can download SAP GUI for Java (64bit) from ftp.sap.com.
Navigate to the following URL and download it as per your platform...
[ftp://ftp.sap.com/pub/sapgui/java/720/|ftp://ftp.sap.com/pub/sapgui/java/720/]
Regards.
Rajesh Narkhede

Need a Data Integration for multiple ERP systems

We are doing some research into a data integration layer to our BW 7.3/BOBJ 4.0 from multiple ERPs. Of course we are looking at Data Services and Information Steward in the BOBJ suite but just looking for anybody's recommendations on the topic.
What technology platform do you use to do the extract, transform, load processes from multiple backend sources into BW? Any you would advise us to avoid?

Hello Edward,
The answer depends on multiple factors.
Some pointers:
Volume and growth of db in scope planning (Federation vs replication )
If data federation is where you want to move data services / BO tools will be ideal
If your data is coming from multiple ERP systems you can utilize there delta queue to load data via data services (in case of SAP)
Use native DB connect/UD connect functionalities in BW as with BW 7.3 its delta capable.
Moving to BW 7.4 you will have SDA to solve that problem of integration to Non - SAP data into your EDW landscape
These are pointers but I would say talk to enterprise architects and look into the foresight of wheyare you want to move your EDW platform.
Cheers!
Suyash

Integrating a custom toolchain in Eclipse for multiple host systems

Hey guys
I have a custom GCC toolchain that compiles binaries for my operating system project. I'm having problems with integrating this toolchain in Eclipse CDT to have proper preprocessing and error checking.
On Windows, the toolchain resides in the Cygwin directory "C:/cygwin/ghost", and on other hosts it resides in "/ghost".
Preprocessor:
I've tried to configure the project to use a "Cross compiler" toolchain and set the "Command to get compiler specs" under "C/C++ General -> Preprocessor Include... -> Providers -> CDT Cross GCC Built-in Compiler Settings" to use my compiler (namely i686-ghost-g++). This results in the include paths in my attachment being determined.
Well, this is obviously correct for the compiler but does not work on Windows, because the compiler does not emit the "C:/cygwin" part of the path. Is there a way to define a prefix for these?
Builder's environment:
I'm using plain old bash scripts to build applications; on unix-like systems they run within the normal environment, but on Windows they must be run within the Cygwin environment (so the necessary tools are properly found).
I tried setting the "C/C++ Build -> Builder Settings -> Build command" to sh build.sh to get my scripts used. This does not work with the Cross compiler toolchain setting, as they run in the Windows environment, not in the Cygwin environment. I can fix this by switching to the Cygwin toolchain configuration and setting the "C/C++ Build -> Environment -> PATH" variable properly, but this does not make sense as I also want to use the same project settings on non-Windows systems, too.
Questions:
How is it meant to be done? My goal is to have Eclipse automatically determine the include paths & therefore correctly preprocess sources; also being able to run my build scripts within the correct environment per system.
If configuration is not suitable for this: Where can I find information on how to create a custom toolchain? With that it might be possible to implement it so that it automatically determines what environment to use on each system and how to determine include paths.
Any help is greatly appreciated!
Greets

In order to perform what your are trying to do in CC 5.2, you will need to go to configuration and setup a logical system, such as SAP R/3 and define all the appropriate systems for the logical system. Then, when modifying the functions, you will need to set the tcode (action) to the logical system defined, such as R/3 or APO, etc.
The cross-system functionality only comes into play if you want to analyze the SOD where a conflict would occur if a user had access to one function in one system (for example - purchase order processing in APO) and a conflicting function in a different system (for example - Vendor Master in R/3).
If you simply want to check who has violates a risk against multiple system - the logical system is the best way. You can have an logical system by system type - R/3, BW, APO, SRM, etc.
To convert this over, you can export the rules and during the export you have to define the new system when exporting the file. If that doesn't work, I'd just delete everything out, and use the upload files to reload the rules with the correct data.

3rd party tech systems for multiple business systems...

I think this might a very stupid question but still would like to post it..:).. In a 3parties involved scenario, can 1 technical system be assigned to multiple business systems , if all business systems refer to the same 3 party..or does each 3rp party business system needs its own technical system..
Also I need to move only 1 product and the SWCV assigned to the product to QA..I do not want to export entire SLD..By exporting this single product and importing into the SLD of QA, I hope it will not overwrite the SLD components of the QA box but add this new product as delta.
-Teresa

Hi Teresa,
>>>Also I need to move only 1 product and the SWCV assigned to the product to QA..I do not want to export entire SLD..By exporting this single product and importing into the SLD of QA, I hope it will not overwrite the SLD components of the QA box but add this new product as delta
I believe you can only do an incremental export/import
sld does not allow importing/exporting one product...
Remember to do a backup of your QA SLD
(from the SLD - administration)
then if you make a mistake nothing will happen
about the second question:
<i>"Business systems, which name the logical receiver independently of technical properties. For example, a business system might be a client of an SAP system.
Technical systems with which the hardware of the system is specified in more detail (server data, and so on)."</i>
this should be possible not only for SAP systems
Regards,
michal
Message was edited by: Michal Krawczyk

SAP GUI FOR HTML - SAP Netweaver loading screen

We have an SAP EP7 portal with an ECC 6.0 R/3 backend. In the portal I have an SAP Transaction iView using transaction code PA64. The display in the portal uses SAP GUI for HTML.
The iView loaded correctly (i.e. displayed the transaction screen correctly in the Portal Content Area) until our recent SP upgrades to the R/3 backend and portal. For the backend we moved from SP13 to SP15. For the portal we moved from SP14 to SP18.
The issue that I now have is that an SAP Netweaver (SAP GUI FOR HTML) loading screen now appears (for about 5 seconds) prior to the PA64 transaction screen being displayed in the Portal Content Area.
Whilst I accept that this is not a major issue, I would like to suppress the display of this loading screen. Does anyone know how this can be achieved?
Many thanks
Audre Beenen

Thanks Michael. We also updated our system and are having the same issue. As you advised and I see in the SAP note, I'm going to add the ~nosplash parameter. We do have SAPKB70017. Is there a particular value associated with that parameter when it is added in SICF?
Thanks,
Pam Laverty

SAP Cloud for Customer & SAP ECC/CRM OnPremise integration using WebServices!

Hello All,
I would like to ask if anyone has really created a working integration scenario between a Cloud Solution & an ECC/CRM OnPremise solution?
We are trying to build some prototypes for this, however, due to connectivity errors/issues, unable to proceed.
I'm looking for information on:
> What certificates precisely are needed on both Cloud & OnPrem systems?
> What configuration if any is required on Cloud & OnPrem solution, except for communication system/arrangements on Cloud solution?
> Any use case if available from anyone which can demo integration between Cloud solution & ECC/CRM OnPremise solution.
I'd really appreciate responses on this.
Many Thanks
Ankur

Thanks Sathya for the response.
https://scn.sap.com/community/cloud/blog/2013/10/10/new-e-learning-for-i
ntegration-of-sap-cloud-for-customer-with-sap-erp-and-sa
p-crm-now-available : Not working! => Please check & confirm.
Just to give you our background...we are SAP Cloud Partners & VARs, hence we are building few prototypes for Customer Demos & POC.
Per my understanding, its just one of the OnPrem system, either an ECC OnPrem or CRM OnPrem that you can integrate with one C4C tenant at a time, i.e. to one single tenant. In our case, we are trying to integrate ECC OnPrem with C4C system.
We are in the process of deploying SAP PI as the middleware platform for integration between C4C & ECC/CRM OnPrem., which is going to take few more weeks.
SAP HCI will be the other approach, but we are currently not familiar with that, hence we have a trial to start in coming week for SAP HCI, so this is going to take some time as well.
Hence, WebService is the only currently available option for us to build these prototypes, POC for Customer Demos, to show working integration scenarios between ECC OnPrem & C4C system.
We have been facing some technical issues after setting up necessary communication systems/arrangements on C4C system & trying to do a WS call from SDK also we get error when we do a ping test from within C4C system to check connection.
Has SAP developed any WS integration between C4C & either of the ECC or CRM OnPrem system? Or is it just PI & HCI which SAP has for integration?
I'd truly appreciate if you can guide us on creating few integration scenarios (Working ones of course ) using Webservice between C4C & ECC OnPrem system.
Many Thanks
Ankur

SAP Webdispatcher for multiple SAP systems

Similar Messages

Maybe you are looking for