SAP WM-Stock Placement by SUT

Hi
While using Stock palcement strategy as "P"(By storage unit Type"),Capacity Check indicator is maintained as "3" in the storage type means the capacity check based on the maximun qty entered in the Material Master.
In the Material Master Maximum Capacity is maintained as "140 EA" and there two sections in the BIN ,while reciving 280 EA system palces the Two Industrial Pallets in the same bin ,one industrial pallet in each Section.
Capacity check is maintained for the Bin But system is executing capacity check for the Bin section .How to solve this
Regards
kumar

Hi Aktar
Yes we have activated SUT check at the Storage type level.
Regards
kumar

Similar Messages

  • SAP WM -Stock Placement

    Hi
    Two quries
    The scenario is -On receipt of stock need to first fill the Fixed bin in the Fixed storage type and if the capacity reached max in the fixed bin then the reserve bins in the reserve storage types are to be filled.Only one fixed bin is maintained for a material.
    (1) Wat stock placement strategies need to be maintained for the storage types Fixed and reserve storage types.
    (2) Iam trying using Stock placement strategy for fixed storage type as "F" (fixed bin ) and in the reserve storage types as "K" (near picking bin).Defined Storage type search sequence first fixed and next reserve storage type.In the Near picking bin stock placement strategy activation expect "Search width per level" and "Assign shelves to the aisiles" all other configuraion are done.
    Pls tell me the impact of not using these two steps in detail. (a) Search width per level(b) Assign shelves to the aisiles .Is it mandatory to use this two steps for the near picking bin strategy .
    help me to solve these quries

    Hi Kumar,
    I suppose you have maitained capacity check for the storage type 231 .
    Based on the SUT's and u r strategy P, the system will allcate the numbers.
    usually if there are two SUt's ina a bin where it belongs to the storage type 231 then the bin will have 001-02-A/2
    the special characters gets assigned after the placement.
    hope this helps !!!

  • SAP WM -Stock Placement-Near Picking bin

    Hi
    Two quries
    The scenario  is -On receipt of stock need to first fill the Fixed bin in the Fixed storage type and if the capacity reached max in the fixed bin then the reserve bins in the reserve storage types are to be filled.
    (1) I trying using Stock placement strategy for fixed storage type as "F" (fixed bin ) and in the reserve storage types as "K" (near picking bin).Defined Storage type search sequence first fixed and next reserve storage type.In the Near picking bin stock placement strategy activation expect "Search width per level" and "Assign shelves to the aisiles" all  other configuraion are done.
    Pls tell me the impact of using these two steps in detail. (a) Search width per level(b) Assign shelves to the aisiles .Is it mandatory to use this two steps for the near picking bin strategy .
    (2) Is their any other solutions can be followed for the above said scenario.
    help me to solve these quries
    Regards
    Kumar

    Hi Aktar
    We maintained
    Stoarge Type Stock palcment Strategy:Addition to exsisting Stock
    SUT Active,SU Active ,Addition to exsisting stock Active
    In Mixed stoarge :Mixed Storage Not Allowed.
    (Mixed stoarage Type Indicator "A" is not allowed when we are using stock palcement startegy as 'Addition to exsisting stock").
    Material we are not tracking by batch number ,but SLED will be maintained at the time of receipt.
    When we receive  New stock ,system  is adding to the BIN which already has the same Material ,System is adding the new stock to the exsisting SU Number(Not creating the New SU Number) and SLED information even though different for the Incoming New stock ,system over writes with the exsisting stock SLED.
    Pls help ,how to solve this
    Regards
    Kumar

  • SAP WM-Stock Placement Strategy "P"

    Hi Gurus
    While using stock palcement strategy "P" "by storage  Unit Type" we are dividing bins to  section like
    Stoarge Type  Section   No of itms 
    231                 A               3                 1       2     3
    is this code need to append to the storage bin co ordinate
    like 002-001-A/1  002-001-A/2    002-001-A/3
    If so when i create the storage bin co ordinate through Ls01n by defining the Storage bin co ordinate as  002-001-A/1  system throw error "The special character "/" must not be used in the storage bin name".
    How to solve this ,pls explain the stock palcment through startegy "P" ,where to mention the bin section in the bin coordinate.

    Hi Kumar,
    I suppose you have maitained capacity check for the storage type 231 .
    Based on the SUT's and u r strategy P, the system will allcate the numbers.
    usually if there are two SUt's ina a bin where it belongs to the storage type 231 then the bin will have 001-02-A/2
    the special characters gets assigned after the placement.
    hope this helps !!!

  • SAP Scripts for Stock Removal and Stock Placement ?

    Hi All,
      Can you please let me know what are the SAP script names and Transaction codes for  Stock Removal and Stock Placements ?
    Thanks,
    Raj

    Hi
    Tcode is MIGO only (select Goods receipt) and mvt type as
    Putaway (305, 315, and so on)
    Stock removal (303, 313, and so on)
    Transfer posting (301, 311, and so on)
    regards
    Yogesh

  • Report MCL1: Analysis Stock Placement  and Removals: Selection

    Hello,
    I want to use  report  by T.Code MCL1- Analysis Stock placement and Removals. This is standard SAP report. When i am putting  my warehouse no and execiting it it is saying no data for selection.
    I want to know to run this report whether any  SPECIAL customization setting is required and what will be the output of this report.
    Regards,
    Shailesh

    Hello,
    This is an older post.
    In SPRO for LIS >Updating Control>Activate Update-->Inventory Controlling / Warehouse Management
    Tables are:
    S090          WM: Stock placements/removals
    S091          WM: Quantity flows
    Regards
    Waza

  • Full Stock Removal & Full Stock Placement

    Assume, in the source storage bin "B1" we have stock of 100 qtys. (Storage type "S1") and the destination storage bin is "B2" (Storage type "S2").
    Suppose, a process order has been created for 75 qtys. and corresponding to that a TR generated for 75 qtys..
    So, material has to be transfered from source bin BIN "B1" (Storage type "S1") to destination bin "B2" (Storage type "S2").
    So, when we create a TO for this TR &  confirm the TO, system picks only 75 qtys. from the source bin "B1" (storage type "S1") & transfers 75 qtys. to the destination storage bin "B2" as per the TR qtys.. (instead full 100 qtys. is to be transfered)
    Now, the clients requirement is that, complete 100 qtys. is to be transfered from the source bin "B1" (Storage type "S1") to destination bin "B2" (Storage bin "S2").
    In the configuarion settings for Storage type 'S1', "Full stock removal is activated"  and "Retun stock to same bin is active"  (SU Mngt. is active. ). As the SU Mngt. is active, we are not able to un-check the indicator "RETURN STOCK TO SAME BIN".
    But even though the above setting is active, while stock removal & placement, the system is considering only 75 qtys.and transering the 75 qtys. from "B1" to "B2", instead at the time of stock removal system should consider the full 100 qtys. &  full stock 100 qtys. is to be transfered to the destination bin "B2".
    Also, if i check the indicator "OVERDELIVERIES" for movement type 319, we are able to transfer the full 100 qtys. to destination bin "B2", but we have a situattion not to check this indicator for movement type as this will effect for all the warehouse numbers as well as all the storage types.
    So, Please help me, how can we achieve the "FULL STOCK REMOVAL & FULL STOCK PLACEMENT" .....
    What STATERGIES to be selected & any other configuration is invovled in this....please let me know.
    Thanks & Regards,
    Pavan CN
    Edited by: cn_pavan on Jul 25, 2009 7:19 PM

    Hi,
    Please check this thread:
    Re: Issue on complete stock removal
    remark:
    we have a situattion not to check this indicator for movement type as this will effect for all the warehouse numbers as well as all the storage types.
    As I remember (I'm not before SAP, so maybe I'm mistaken) you can define movement type WH-specific.
    Regards,
    Csaba
    Edited by: Csaba Szommer on Jul 26, 2009 7:59 AM

  • Error message if i want to register in SAP service market place

    Hi...
           I am getting this error message while registering in SAP service market place how can i solve this problem and what is the way to register.The following is the error message:
    A user ID cannot be created with the specified data, because no (valid) e-mail domain is registered for your customer number.
    Please contact your SAP system administrator and request that he/she maintain your company's e-mail domain. You can then request a user ID again here.

    Hi,
    Did you solve this problem? We are also facing the same..

  • WM - Stock Placement and Stock Removal Strategy

    Hi Gurus
    Need yr expertise..
    What would be the ideal stock placement strategy if need to store standard pack in one location and partial quantity in another location?
    example:
    standard pack for material A is 100pcs
    if GR 250 pcs, TO need to be created for 200pcs at location A (since it is standard pack) and
    50pcs at location B (sicne it is partial)
    The same logic aplly for stock removal strategy. If customer order of 200pcs, system need to pick
    from location A (since it is standard pack). If customer order 50pcs, system need to pick from
    location B. What will be the ideal stock removal strategy?
    Please advise
    Rgds..Sanjay

    yu can make use of the small/large stock removal strategy and for the concerned material in WM 2 view you can give the control quantity like if the requirment is of >200 pc then storage type 0002 should be used to pick the goods otherwise if required quantity is less then system should search for storage type 0001
    this is a standard strategy

  • SAP Business work place in WEB GUI

    Hi,
    When ever i am clicking SAP BUSINESS WORK PLACE in WEBGUI (SRM)menu ,system is throughing error :  scripts/wgate/wngui  :  Call was terminated because the corresponding service is not available.
    In servies iam not able to get  scripts/wgate/wngui  to activate.
    Please help me in this.
    Nanaji

    Hi,
    Please check the service is active in SICF transaction.
    Regards,
    Masa

  • Note 1023661 doesn't exist in sap service market place

    I just configured the SAP discovery server and I am getting the error message mentioned in the Quick Guide (first one under troubleshooting). The solution points me to note 1023661, but it doesn't exist in SAP service market place.
    Is there another note?
    Thanks

    Hi,
    In the note the following is described:
    5. Before logging into the DS you receive a Service Control Manager          
    popup appears saying "At least one driver failed during system               
    start-up...". After logging in you are presented with a #Hardware            
    Installation# popup for the Smart Array P400 Controller.                                                                               
    Solution: There is an HP driver that will need to be updated by              
    customers who receive the latest HP G5 DS. Please follow the                 
    instructions on the attached word document  called "SAP DL380G5 Driver       
    Update Process.doc"                                                          
    Please download the document attached to the note and follow the instrauctions there.
    Regards,
    Amir

  • User Exit for Stock Placement for Next Empty Bin Strategy

    Hi Techi's
    I have got one requirment for stock placement in Warehouse Managment as below:
    If client uses the standared strategy for putting stock in Storage Bin as "Addition to Stock" Then the self life of the coming material is being replaced by the existing material's seft life.
    And if they use the "Next Empty Bin" strategy then the obove issue is not coming but system always searches for the full empty bin only thus wastage of the existing bin's which already has some space.
    Now what my client wants is that to use the "Next Empty Bin Strategy" so that self life is not being overwritten but along with system should not search the complete empty bin for placing the stock rather it should search the bin's which already has some space then later move to the empty bin's.
    In summary its a mixture of "Addition to Stock and Next Empty Bin" Strategy.
    Please suggest me the Exit for this if available or tell me the code if already has implemented it. Friends its going very hot.
    Please please help me.
    Thanks in Advance.
    -=Maddu=-

    Hi All,
    Please help me for this. I am heavyily stuck on this.

  • User Exit for putting own stock placement logic in WM (Warehouse Managment)

    Hi Techi's,
    I have got one requirment for stock placement in Warehouse Managment as below:
    If client uses the standared strategy for putting stock in Storage Bin as "Addition to Stock" Then the self life of the coming material is being replaced by the existing material's seft life.
    If they use the "Next Empty Bin" strategy than the obove issue is not coming but system always searches for the full empty bin only thus wastage of the existing bin's which already has some space.
    Now what my client wants is to use the "Next Empty Bin Strategy" so that self life is not being overwritten but along with system should not search the complete empty bin for placing the stock rather it should search the bin's which already has some space then later move to the empty bin's.
    For good reciept they are using MB01.
    In summary its a mixture of "Addition to Stock and Next Empty Bin" Strategy.
    Please suggest me the Exit for this if available or tell me the code if already has implemented it. Friends its going very hot.
    Please please help me.
    Thanks in Advance.
    -=Maddu=-

    Hi Maddu,
    If I undertstand it correctly,
    System should search for the available Bin Capacity, and if there is space available the next incoming stock also need to be placed in the same Bin (system should suggest the Bin).
    Now, let us consider the Physical process involved. Let us say, System suggested Bin A1001 and stock of Material A 500 Qty has been placed in some part of the Bin. Now, next time for the same material while incoming, system let us assume for time being suggested A1001 Bin due to available capacity. The operator should place the stock in the same bin, right. Assume that you have two quants in the Bin so that in system Shelf life date (GR Date) is different for these two different receipts. However, while Issuing even if system suggested Bin based on Shelf Life date, how the Operator will physically identify between the above two stocks. Hence, there should be physically some more identification parameters.
    Under this case, either you can have Batch Management, (two have multiple quants) or Storage Unit Management. In this way, system will suggest the Identifier based on GR Date or Shelf life Exp date, also physically some labels placed to identify the different stocks in the same Bin.
    I hope, it clarifies your doubt.
    Last but not the least, user Exit will not solve your purpose.. instead operation process change involved along with Batch Identifier or Storage Unit Identifier.
    Please reward points, if it helps.
    Thanks & Regards,
    Ramkumar

  • Downlaod of BI on SAP service market place

    Hi,
    We are running SAP R/3 4.7 Enterprise. I am told our license includes Business Intelligence however we are not currently making use of this.
    I looked on SAP service market place downloads section to try and download BI to install into an IDES system just to see some basics.  I found…
    My Company's Application Components >  BI CONT >  BI CONT 7.03 > Installation > SAPKIBIIIH
    But I think this is only a part of BI and I need to download BI 7.0 ? 
    BI is totally new to me so please could somebody help and advise where I need to navigate to download BI.
    Many thanks
    Rob

    JavaDocs Link: http://www.sdn.sap.com/irj/sdn/javadocs
    For PI7.0 http://help.sap.com/javadocs/NW04S/current/pi/index.html
    For PI7.1 http://help.sap.com/javadocs/pi/SP3/xpi/index.html
    You can get the Jar files from the java web start cached folder in your work station.
    Edited by: Praveen Gujjeti on Mar 12, 2011 11:25 PM
    Edited by: Praveen Gujjeti on Mar 12, 2011 11:28 PM

  • MCL9 Mat stock placements and removals report

    I'm trying to find a good report that shows the material stock placements and removals.  I tried MCL9 but i get a message indicating no data exists.  why would that be?  Thank you

    Hello,
    This is an older post.
    In SPRO for LIS >Updating Control>Activate Update-->Inventory Controlling / Warehouse Management
    Tables are:
    S090          WM: Stock placements/removals
    S091          WM: Quantity flows
    Regards
    Waza

Maybe you are looking for

  • Cisco anyconnect 3.1 - Certificate Validation Failure.

    When i try to start a SSL VPN connection to the ASA(8.4) with anyconnect 3.1, Cisco anyconnect receives a message saying "No Valid Certificates Available for Authentication". Prior to the test;      On the ASA, i have obtain CA certificate and its id

  • How to GET RID of RAID and get back to IDE??

    Hi, I have a great Z800 Workstation with a 1.5TB HDD running Win7Pro-64. I've been using an 128GB SSD cache (Synapse/Dataplex) for about a year with no trouble, but stupidly thought that Intel's RST (Rapid Storage Technology) would do a better job, f

  • Why wont adobe illustrator open on my mac anymore?? HELP!!!

    HELP! yesterday it was working and now it wont open....i tried uninstalling and re-installing...no such luck? anyone??

  • My Nokia 5530 keeps getting a red and black stripe...

    Can anyone please help me with this problem i have only had this phone for two / three months and its already playing up. As I said I will just be on my phone then the screen will go black with red and black stripes going from one side of the phone t

  • How to recover ABAP deleted progarm

    Hi All, I have created an ABAP program in '$TMP'  dev class. Accidentally i have deleted the program. Is there any way to recover this program? Is there any transaction that may be useful or what we need to do? Pradeep