SAP XI message archiving

Hi
I am running sap archiving and deletion of messages. I have observed that only messages from the CENTRAL pipeline are getting archived while the other pipelines like PIPELINE_RECIEVER etc are not getting archived and deleted.
Please can anyone let me know what is the problem.
Many Thanks
Deb Sircar

Hi
As per the Archiving/ deletion settings, an Interface (its message on the whole) is either Archived or Not Archived.
when "Archived" all pipeline steps are archived & "once deleted" you cannot see that message any more in SXMB_MONI (but only from the archived msgs) and the archiving process is said to be complete.
Check my posts in this link
Re: XI Message archival
explain clearly the issues you face, what you mean as PIPELINE_RECEIVER.
Regards
Vishnu

Similar Messages

Message archiving/deletion in PI 7.1

Hi All,
I'm new to SAP PI. We have newly implemented PI 7.1 in our landscape. We have installed PI in HP UX 23 with oracle as the database.
We have configured the messge archival/deletion in our PI production server. We have allocated a dedicated file system to store the archived messages. Eventhough we have maintained the path of the archival_interface, no messages are archived in this drectory.
We are using synchronous interfaces and while executing the report ( RSXMB_SHOW_REORG_STATUS ) as per the note 872388, the report says that there are more than 1700 messages to be archived. But no messages are getting archived in the path mention as of now.
I think we have missed out some steps while configuring the archiving process. Can somebody help me with the steps involved in PI integration engine message archival/deletion.
Your timely help will be much appreciated.
Thanks in advance.
Regards,
Varadhu

Hi,
Go to transaction "SXMB_ADM" on the ABAP stack of your XI installation. Go to "Integration Engine Configuration" and click on tab "Specific configuration". Check if you have the parameter "LOGGING_SYNC" enabled (It should have a value 1). In case it is not present, please create this entry and have the default value as "1". This will enable you to view all sync messages on sxmb_moni.
Thanks,
Sidhartha

Message archiving in adapter engine

Hello Gurus,
We have successfully configured message archiving in the integration engine via all the sap documentation and sdn blogs.
For the archiving in adapter engine, we have followed the documentation as well however our messages are simply not being archived in the adapter engine.
The steps for AE we took are as follows:
1. goto DataArchivingService/DAS and created an archive store, home path synch and assigned it to an archive path (the ILM browser connects fine as well)
2. created the archiving background job in RWB (both default and a custom one with rules)
The jobs seem to be running fine on our schedule but no messages are being processed. I am assuming the retention period in AE is the one we have set up in SXMB_ADM for IE.
Is there anything we may have missed?

Hi,
Please check the [link|http://www.****************/Tutorials/XI/Archiving/Index.htm]
Also check this
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/402fae48-0601-0010-3088-85c46a236f50?quicklink=index&overridelayout=true
http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=147266890
Regards,
Naveen.

PI message archiving

Hello
I have recently been made responsible for a PI 7.1 system, and am new to SAP and PI. I have some general questions about message archiving and would be grateful for some advice.
I understand that message details are saved to SXMSPMAST and associated tables. There is a limit to the number of rows in the tables.
Q. What happens when the tables are full?
Q. Is it possible to increase the number of rows that they can hold?
I believe that none of our existing interfaces have been configured for archiving/retention.
Q. Should the interfaces have been configured for archiving before first use?
Q. Does this only apply to asynchronous interfaces?
The vast majority of messages in SXMXPMAST have ITFACTION set to 'INIT'. I understand that these messages will not be deleted or archived.
Q. Is it possible to change the ITFACTION and is this something I should be doing?
Q. There are some synchronous messages with a status of system error on our system. I am not able to cancel these messages in SXMB_MONI. I do not want to keep a record of these messages as they were sent before the system was 'live'. Is there anything I can do to delete them?
I have found several documents on the SAP forums and blogs, but none deal with the case where existing interfaces haven't been configured for archiving.
Kind regards
Steve

Dear Steve,
a lot of questions Let me answer them one by one...
I understand that message details are saved to SXMSPMAST and associated tables. There is a limit to the number of rows in the tables.
Q. What happens when the tables are full?
A. Nothing. The number which you refer to as 'limit of rows' reflects the number of expected entries. This value is used to control reorganizational tasks in PI.
Q. Is it possible to increase the number of rows that they can hold?
A. Yes, but SAP does not recommend this in general. Also there is no need to increase this number as it used as a threshold for reorganization only.
I believe that none of our existing interfaces have been configured for archiving/retention.
Q. Should the interfaces have been configured for archiving before first use?
A. Yes, definitely. The interface action nis determined right when the message enters the Integration Server. Therefore it is important to configure archiving beforehand. However, as of PI7.10 SP6 report RSXMB_DEL_TO_ARCH is available to change the interface action from 'deletion' to 'archiving' belatedly (this direction only!).
Q. Does this only apply to asynchronous interfaces?
A. Yes, synchronous messages will not be archived.
I

HELP! SAP Execute Delete Archiving Session failure

Dear All,
Could anyone give me opinions on SAP problems?
When we archived object u201CFI_documntu201D, delete a u201CFilesu201D in tcode u201CSARAu201D, the AIX file system u201C/Oarcle/R3P/oraarchu201D was full, SAP and database have stopped, one archiving session deleting was failed and cannot retry. The SAP error message below:
"Text CCR 110000570022007002 ID 0001 language EN not found"
Message no. TD600
Diagnosis: you want to read a text which does not exist in the database (or update memory)
system response: Reading could not be carried out.
Procedure: you need to create this text:
1.Initialization (module INIT_TEXT)
2.Save (module SAVE_TEXT)
In SAP -> Overview of Archiving, the icon of file "000092-0031FI_DOCUMNT" is a THUNDER, not a green light.
I captured screen for reference.
[http://picasaweb.google.com.hk/lbiceman/SAP_error?feat=directlink]
Please teach me how to delete archiving session after archive job was completed.

Hi Alan,
I have not faced this particular situation, so the following is just a thought, please try with caution.
Delete the cancelled job from the job overview, this possibly does away with the flash icon (THUNDER) on the deletion status of archive file, hopefully you should be able to manually re-run the delete job by going to SARA-(object FI_DOCUMNT) ->Delete and choosing the file for which deletion was incomplete.
Hope this works,
Naveen

XI Message Archiving Problem

Hi,
I was trying to schedule XML Message Archiving Job in XI 3.0 SP16.
As per schedule procedure, I have defined interfaces for archiving and retention period for the same. Also I have configured the archive object BC_XMB in SARA and activated archive infrastructure SAP_BC_XMB in SARI.
I have scheduled the job SXMB_ADMIN, and the job ran without any error. When I checked the job log of ARV_BC_XMB_WRI<timestamp>, it says "0 XML Messages Archived" and I am unable to see the archive file in the target location.
I have also run the report as per note 872388, i.e. RSXMB_SHOW_REORG_STATUS and it shows "Msgs not in retention period (can be archived): 2,030".
Can anybody help me, how can I solve this problem, so that I can archive the XML Messages.
Thanks in advance.
Regards
Jaya Ganesh

Hi Jaya Ganesh,
Hope u followed this
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/402fae48-0601-0010-3088-85c46a236f50
http://help.sap.com/saphelp_nw04/helpdata/en/fc/e6173d3215cc40e10000000a114084/frameset.htm
U may also refer these SAP Notes
824374 - XI messages are not archived or deleted
866896 - XI messages are not archived and/or deleted
Regards,
Prateek

Adapter Engine Message Archiving

Hello,
Can anybody share with me the guide for Adapter Engine Message archiving for PI 7.1
Thanks ,
Loveena

Hi,
Refer these links, it should help
XML Data Archiving - Configuration Guide for J2EE Applications
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/65901c2e-0801-0010-e79a-de4ed9275d70?quicklink=index&overridelayout=true
http://help.sap.com/saphelp_nw04/helpdata/EN/8f/d906d01f77fa40a4c84683c3f8326f/content.htm
Re: Archiving message PI7.1 Could not find msg in archive error
Regards,
Nithiyanandam

Configuring Message archiving

Hi,
while configuration of XI 3.0
for the step <b> Configuring Message Archiving for the Adapter Engine and the PCK</b>
on the URL http://<host>:<port>/DataArchivingService/DAS
when we click on the link like "Configure Archive Store "under Administration gives following error
<b> Details: com.sap.engine.services.jndi.persistent.exceptions.NamingException: Error getting Naming on Server in getInitialContext operation
</b>
can some one help in this matter.
Thanks
Regards
Deepti

the problem is the Exclusive = Yes indicator in the access sequence.
Your other message has this exclusive indicator as well.
so if the first message is found, then no other message wil be determined
to allow several messages in one PO, you must not set this exlusive indicator

XI/PI Message Archiving

Hello Geeks,
Can someone provide me the best practices documentation and how to guide for Message archiving in XI/PI. I appreciate your help.
thanks..

Hi,
Refer these-
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/402fae48-0601-0010-3088-85c46a236f50
http://help.sap.com/saphelp_nw2004s/helpdata/en/0e/80553b4d53273de10000000a114084/content.htm
Thnx
Chirag Gohil

JAVA Cryptographic Toolkit sap java library archive

Hi Experts
I am trying to install SAP Net Weaver 04 support release 1 > oracle JAVA System. I am performing installation on Windows 2003 server.
While installing the JAVA Cryptographic Toolkit > sap java library archive I have getting problem please give any idea about this.
Where I get this path how to download the SAP JAVA library archive file.
Error finds out shown bellow
Regards,
Rahul

Rahul wrote:>
> Hi Experts
>
> I am trying to install SAP Net Weaver 04 support release 1 > oracle JAVA System. I am performing installation on Windows 2003 server.
> While installing the JAVA Cryptographic Toolkit > sap java library archive I have getting problem please give any idea about this.
if you would give us the error message we could give you an advise.
> Where I get this path how to download the SAP JAVA library archive file.
on the screen where you need to enter the path to the JCT, the links are given on where to download those libararies.
Markus

Message archiving -Volume test

Hey Guys
We are planning to enable Message archiving for our interfaces.
We have around 2 million messages waiting to be archived,the fear we have is that once we enable message archiving,XI will try to archive all these messages and might choke up due to large volume of data.
Is there a way to enable message archiving in chunks?or may be some other way to handle this situation.
Thanx
Saif

Dear Saif,
for archiving messages junkwise you can use the retention period. This way you can take control on the number of messages that are excluded from archiving.
To do so simply call report RSXMB_ARCH_INTERFACES, click 'Retention Periods' and increase the value for 'XML Messages Without Errors Awaiting Archiving'. If, for example, the 2 million messages result from past 12 months, set the retention period to 330 days. This way all messages of the past 11 months will not be archived as the are they are considered to be still in retention period.
After archiving of messages older than 330 days has completed successfully, you can decrease the retention period to 300 days to archive messages of next month.
In case this does not work out kindly open an OSS message. There are additional options to control the data volume using techniques of the build-in parallelizer. For this I would appreciate to have access to the system under investigation.
Best regards,
Harald Keimer
XI Development Support
SAP AG, Walldorf

Online Consistent brbackup - How does SAP lock the archive files?

With an Oracle online consistent brbacup, i believe that SAP locks the archive log files so they are not deleted during the backup.
How do they do this?
If a backup crashes how do I unlock these locks?

Here is the statement (from the netbackup trace) that caused brachive to stop.
Set file /oracle/BP1/oraarch/BP1arch1_207989.dbf to QUIESCE status.
Here is relevenmat part of the NetBAckup/backint log...
5:21:36.691 [11248] <4> adjustObjectStatus: File </oracle/BP1/oraarch/BP1arch1_207989.dbf> in VxBSA_INPROGRESS status. No ch
ange of status needed.
15:21:36.691 [11248] <4> adjustObjectStatus: Done.
15:21:36.691 [11248] <4> VxBSAWaitForFileListStatus: INF - entering WaitForFileListStatus.
15:21:36.691 [11248] <4> bsa_handle_std_backup: INF - entering bsa_handle_std_backup.
15:21:36.691 [11248] <4> bsa_comm_w_bkar: INF - entering bsa_comm_w_bkar.
15:21:38.714 [11248] <4> bsa_comm_w_bkar: Recieved bpbkar message: #END /oracle/BP1/oraarch/BP1arch1_207989.dbf
15:21:38.714 [11248] <4> bsa_comm_w_bkar: Comparing physical file path: /oracle/BP1/oraarch/BP1arch1_207989.dbf
15:21:38.714 [11248] <4> bsa_comm_w_bkar: to file from bpbkar message: /oracle/BP1/oraarch/BP1arch1_207989.dbf
15:21:38.714 [11248] <4> bsa_comm_w_bkar: File paths matched.
15:21:38.714 [11248] <4> bsa_comm_w_bkar: Set file /oracle/BP1/oraarch/BP1arch1_207989.dbf to VxBSA_UNQUIESCE status.
15:21:38.714 [11248] <4> bsa_comm_w_bkar: Recieved bpbkar message: #BEGIN /oracle/BP1/oraarch/BP1arch1_207989.dbf
15:21:38.714 [11248] <4> bsa_comm_w_bkar: Comparing physical file path: /oracle/BP1/oraarch/BP1arch1_207989.dbf
15:21:38.714 [11248] <4> bsa_comm_w_bkar: to file from bpbkar message: /oracle/BP1/oraarch/BP1arch1_207989.dbf
15:21:38.714 [11248] <4> bsa_comm_w_bkar: File paths matched.
15:21:38.714 [11248] <4> bsa_comm_w_bkar: Set file /oracle/BP1/oraarch/BP1arch1_207989.dbf to QUIESCE status.
15:21:38.714 [11248] <4> bsa_comm_w_bkar: File /oracle/BP1/oraarch/BP1arch1_207989.dbf not in VxBSA_NOTREADY state.
15:21:38.714 [11248] <16> bsa_comm_w_bkar: Can't change state.
15:21:38.714 [11248] <4> do_file_backup: The sequence of calls is incorrect.
15:21:38.715 [11248] <4> do_backup: Exit with status: <2>.
15:21:38.715 [11248] <4> /usr/sap/BP1/SYS/exe/run/backint 6.0: **************************************************************

Unable to Log-in *SAP System Message : Error while reading a Dynpro*

Hi,
We are facing issues while logging-in through SAP logon 710.
The system throws an error dialog box with the below message:
SAP System Message : Error while reading a Dynpro
At the OS level Java process server0 is in stop status with exit code -11113. In ABAP WP Table all processes are in wait status.

Hi Please find the contents of std_server.out below.
stdout/stderr redirect
node name   : server0
pid         : 4124
system name : KEC
system nr. : 01
started at : Mon Jul 27 15:44:57 2009
[Thr 5656] MtxInit: -2 0 0
CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
CompilerOracle: exclude com/sapportals/portal/navigation/cache/CacheNavigationNode getAttributeValue
CompilerOracle: exclude com/sapportals/portal/navigation/TopLevelNavigationiView PrintNode
CompilerOracle: exclude com/sapportals/wcm/service/ice/wcm/ICEPropertiesCoder encode
CompilerOracle: exclude com/sap/lcr/pers/delta/importing/ObjectLoader loadObjects
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readElement
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readSequence
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/TypeMappingImpl initializeRelations
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/GeneratedComplexType _loadInto
SAP J2EE Engine Version 7.00   PatchLevel 110760.44 is starting...
Loading: LogManager ... 250 ms.
Loading: PoolManager ... 0 ms.
Loading: ApplicationThreadManager ... 47 ms.
Loading: ThreadManager ... 16 ms.
Loading: IpVerificationManager ... 0 ms.
Loading: ClassLoaderManager ... 16 ms.
Loading: ClusterManager ... 93 ms.
Loading: LockingManager ... 32 ms.
Loading: ConfigurationManager ... 1032 ms.
Loading: LicensingManager ... 0 ms.
Loading: CacheManager ... 93 ms.
Loading: ServiceManager ...
Loading services.:
Service runtimeinfo started. (16 ms).
Service cross started. (31 ms).
Service file started. (31 ms).
Service memory started. (31 ms).
Service timeout started. (16 ms).
Service trex.service started. (32 ms).
Service userstore started. (0 ms).
Service jmx_notification started. (15 ms).
Service p4 started. (62 ms).
Service classpath_resolver started. (16 ms).
Service deploy started. (3722 ms).
Service MigrationService started. (31 ms).
Service bimmrdeployer started. (0 ms).
Service log_configurator started. (5177 ms).
Service locking started. (0 ms).
Service http started. (126 ms).
Service naming started. (157 ms).
Service failover started. (16 ms).
Service appclient started. (31 ms).
Service javamail started. (47 ms).
Service ts started. (47 ms).
Service jmsconnector started. (47 ms).
Service licensing started. (15 ms).
Service connector started. (93 ms).
Service iiop started. (94 ms).
Service configuration started. (16 ms).
Service webservices started. (265 ms).
Service dbpool started. (1204 ms).
Service UT started. (0 ms).
Jul 27, 2009 3:45:09 PM         com.sap.security.core.persistence [SAPEngine_System_Thread[impl:5]_54] Fatal: Initialization of ABAP data source (com.sap.security.core.persistence.datasource.imp.R3Persistence) failed: "     Error while reading a dynpro                                        ". This message is critical if it appears during the startup of the AS Java.
Jul 27, 2009 3:45:09 PM ...re.server.ume.service.UMEServiceFrame [SAPEngine_System_Thread[impl:5]_54] Fatal:
service com.sap.security.core.ume.service ================= ERROR =================
Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
com.sap.engine.frame.ServiceException: Start of UME service failed. Check help topic "Start of UME Service Failed". Technical details:      Error while reading a dynpro
     at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:398)
     at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31)
     at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
     at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
     at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
     at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:81)
     at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:152)
Caused by: com.sap.security.core.persistence.datasource.PersistenceException:      Error while reading a dynpro
     at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.newPersistenceException(R3PersistenceBase.java:236)
     at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.init(R3PersistenceBase.java:491)
     at com.sap.security.core.persistence.imp.PrincipalDatabagFactoryInstance.<init>(PrincipalDatabagFactoryInstance.java:446)
     at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.newInstance(PrincipalDatabagFactory.java:164)
     at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:117)
     at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:63)
     at com.sap.security.core.InternalUMFactory.initializeUME(InternalUMFactory.java:221)
     at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:287)
     ... 6 more
com.sap.engine.frame.ServiceException: Start of UME service failed. Check help topic "Start of UME Service Failed". Technical details:      Error while reading a dynpro
     at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:398)
     at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31)
     at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
     at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
     at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
     at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:81)
     at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:152)
Caused by: com.sap.security.core.persistence.datasource.PersistenceException:      Error while reading a dynpro
     at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.newPersistenceException(R3PersistenceBase.java:236)
     at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.init(R3PersistenceBase.java:491)
     at com.sap.security.core.persistence.imp.PrincipalDatabagFactoryInstance.<init>(PrincipalDatabagFactoryInstance.java:446)
     at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.newInstance(PrincipalDatabagFactory.java:164)
     at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:117)
     at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:63)
     at com.sap.security.core.InternalUMFactory.initializeUME(InternalUMFactory.java:221)
     at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:287)
     ... 6 more
[Framework -> criticalShutdown] Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
Jul 27, 2009 3:45:09 PM             com.sap.engine.core.Framework [SAPEngine_System_Thread[impl:5]_54] Fatal: Critical shutdown was invoked. Reason is: Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.

SAP System Message: Syntx error or generation error in a screen

dear sap basis gurus,
i am currently having problems signing on to our DEV server. i get this error message:
<SID>: SAP System Message
Syntx error or generation error in a screen.
it won't let me log on.
there were no changes made on the server (i.e., profile parameters) lately. it was working really fine after our support package level upgrade about 5 months ago.
have you encountered this problem before? please help me as there we have two imminent go-lives.
thank you very much in advance.
best regards,
albert

hello nick, ashok,
thank you very much for your responses.
i have already resolved this issue by just freeing up some space from our disks. not one of them was full though.
i hope i would no longer encounter the error message.
again, thank you.
best regards,
albert

Credit block SAP inbox message

Hello All,
This is my actual requirement:
When the sales order goes into a credit block, KRML output triggers SAP inbox message to the credit manager/credit representative as per the output records maintained.
In standard SAP, the inbox message is read as
"Order for customer XXXX blocked due to credit limit being
exceeded."
where XXXX denotes the customer number.
My requirement is to bring out sales order number, Sales order value, Ship to party name, Reason for Credit block (Like Oldest open item, dynamic check etc) etc in this SAP inbox message.
I checked KRML output mails and titles and i added the above fields as eg. &VBAK-VBELN&, &VBAK-NETWR& etc but this is not getting reflected in the SAP inbox message.
I am unable to figure out from where the standard mail message "Order for customer XXXX blocked due to credit limit being exceeded." is coming from. If the source of this message can be found, other fields can be added to it as per my requirement.
Please let me know if anyone has any idea how to achieve this.

did u checked tcode NACE--->processing routines -->program + form names.
regards
Prabhu

SAP XI message archiving

Similar Messages

Maybe you are looking for