SAPLPD problem on cluster

Hello experts,
On our BI 7.0 system, we have our Dev and QA environments on single servers. However, for the Production system we use Microsoft Clustering (MSCS).
I am not sure if my problem is related to the cluster architecture at all, but I am having problems printing to printer named LP01 which is supposed to call the SAPLPD program and pass the print job to the default printer as defined in my Windows XP desktop OS.
The LP01 printing works perfectly when I am printing to LP01 from my Dev and QA machines, but on the Prod server if I use LP01 it "doesn't call" the SAPLPD program -- I don't see the SAPLPD listener popping up on my screen and transferring the job to the OS.
Can you please help me with this?
Thank you in advance.

hi ugur,
what kind of cluster arcithecture you're using ? Is your DB and CI reside on same server or different server ?
If it is reside on same server, make sure that this server has minimumly one spool WP. If you're CI and DB is reside on different server, just make sure both server have minimumly one spool WP.
ardhian
http://ardhian.kioslinux.com
http://sapbasis.wordpress.com

Similar Messages

  • Problem: Stopping cluster due to unhandled exception .. Unable to refresh

    Greetings
    While testing a rolling upgrade of an application that uses Coherence 3.5.2 on 62-jvm cluster hosted on
    11 physical machines, we encountered a situation where after the upgrade was completed, most jvms
    in the system abruptly left the cluster. The physical hosts are running CentOS 5.4, the java used is
    the 64-bit server version 1.6.0_16-b01. The test was run under a scenario that imposed "moderate"
    load, with cpu usage on the physical machines never exceeding 60% busy, network bandwidth never
    exceeding 5%, and with some free physical memory. Swapping did not occur during any time during
    the test. I believe we are using the default tangosol-coherence.xml. We got the error below in
    our coherence.log files on all of the systems, all at about the same time (within 10 milliseconds).
    55 of the jvms left the cluster during the incident. There were 55 copies of the error message in
    the various logs, all nearly identical except for the time and member id.
    My questions include
    - what does the error mean?
    - what could cause it? (I investigated system logs, and found no evidence of the NIC cards
    going off line at the time. Any suggestions about how to look for evidence of broadcast storm?)
    - how can we keep it from happening again?
    Many thanks for your help -
    Mike Murphy
    2011-04-26 17:34:14,629 Coherence [email protected] 3.5.2/463 ERROR 2011-04-26 17:34:14.629/1929.311 Oracle Coherence GE
    3.5.2/463 <Error> (thread=PacketListenerN, member=30): Stopping cluster due to unhandled exception: com.tangosol.net.mes
    saging.ConnectionException: Unable to refresh sockets: [UnicastUdpSocket{State=STATE_OPEN, address:port=10.48.88.116:809
    1}, MulticastUdpSocket{State=STATE_OPEN, address:port=224.3.5.2:10013, InterfaceAddress=10.48.88.116, TimeToLive=4}, Tcp
    SocketAccepter{State=STATE_OPEN, ServerSocket=10.48.88.116:8091}]; last failed socket: MulticastUdpSocket{State=STATE_OP
    EN, address:port=224.3.5.2:10013, InterfaceAddress=10.48.88.116, TimeToLive=4}
    at com.tangosol.coherence.component.net.Cluster$SocketManager.refreshSockets(Cluster.CDB:91)
    at com.tangosol.coherence.component.net.Cluster$SocketManager$MulticastUdpSocket.onInterruptedIOException(Cluste
    r.CDB:9)
    at com.tangosol.coherence.component.net.socket.UdpSocket.receive(UdpSocket.CDB:33)
    at com.tangosol.coherence.component.net.UdpPacket.receive(UdpPacket.CDB:4)
    at com.tangosol.coherence.component.util.daemon.queueProcessor.packetProcessor.PacketListener.onNotify(PacketLis
    tener.CDB:19)
    at com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:42)
    at java.lang.Thread.run(Thread.java:619)
    Caused by: java.net.SocketTimeoutException: Receive timed out
    at java.net.PlainDatagramSocketImpl.receive0(Native Method)
    at java.net.PlainDatagramSocketImpl.receive(PlainDatagramSocketImpl.java:136)
    at java.net.DatagramSocket.receive(DatagramSocket.java:712)
    at com.tangosol.coherence.component.net.socket.UdpSocket.receive(UdpSocket.CDB:20)
    at com.tangosol.coherence.component.net.UdpPacket.receive(UdpPacket.CDB:4)
    at com.tangosol.coherence.component.util.daemon.queueProcessor.packetProcessor.PacketListener.onNotify(PacketLis
    tener.CDB:19)
    at com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:42)

    Hi Mike,
    It looks like you are having problems with multicast. You can run the multicast test described here
    [http://download.oracle.com/docs/cd/E15357_01/coh.360/e15723/tune_multigramtest.htm]
    which will help in diagnosing the problem

  • Problems with Cluster Ready Service installation (RAC) in Oracle 10g R1

    Hello
    I have got problems with this installation. I am starting Oracle user
    At the end of the installation I get a mesage when all Configuration Assistants are failed
    I have got 2 computers with Windows 2000 PRO, two networks (private and public)
    As a shared disk I use one external disk (with USB) attached to one computer.
    What to do here?
    please for a reply
    Martin
    PROT-1: Failed to initialize ocrconfig
    SCLS error 1 reading current privileges.
    Internal Error Information:
    Category: 1234
    Operation: scls_iddb_has_privgrp_by_name
    Location: NetLocalGrou
    Other: get local group failed
    Dep: 0
    Step 1: checking status of CRS cluster
    Step 2: configuring OCR repository
    ignoring upgrade failure of ocr(-1)
    failed to configure Oracle Cluster Registry with CLSCFG, ret 102
    Result code for launching of configuration assistant is: 1
    The OUICA command is launched from D:\oracle\product\10.1.0\crs\oui\bin\ouica.bat.
    Launched configuration assistant 'Oracle Notification Server Configuration Assistant'
    Tool type is: Optional.
    The command being spawned is: 'D:\oracle\product\10.1.0\crs/bin/racgons.exe add_config migi:4948'
    Start output from spawned process:
    End output from spawned process.
    Configuration assistant "Oracle Notification Server Configuration Assistant" failed
    Result code for launching of configuration assistant is: 1
    The OUICA command is launched from D:\oracle\product\10.1.0\crs\oui\bin\ouica.bat.
    Launched configuration assistant 'Oracle Private Interconnect Configuration Assistant'
    Tool type is: Optional.
    The command being spawned is: 'D:\oracle\product\10.1.0\crs/bin/oifcfg.exe setif -global "public"/10.0.0.0:cluster_interconnect "public"/192.168.1.0:public'
    Start output from spawned process:
    PRIF-12: failed to initialize cluster support services
    End output from spawned process.
    Configuration assistant "Oracle Private Interconnect Configuration Assistant" failed
    PRIF-12: failed to initialize cluster support services
    Result code for launching of configuration assistant is: 1
    The OUICA command is launched from D:\oracle\product\10.1.0\crs\oui\bin\ouica.bat.
    Error:*** Alert: Some of the configuration assistants failed. However these are optional assistants, so they are not required for the correct configuration of your system. If you want to try to run those assistants again, select the failed assistants and click the 'Retry' button. ***
    User Selected: Yes/OK
    Starting to execute configuration assistants
    Launched configuration assistant 'Oracle Cluster Ready Services Configuration Assistant'
    Tool type is: Optional.
    The command being spawned is: 'D:\oracle\product\10.1.0\crs/install/crssetup.config.bat'

    Also you clusterware installation installs to an ORACLE_HOME.
    Oracle does only make a differentiation, if it has to be clear, that you got a clusterware home and a database home.
    Normally if a patch is referring to $ORACLE_HOME (and the patch can be used for clusterware & database), it just means the installation directory of the oracle software installed.
    Sebastian

  • Potential dynamic server list updating problem in cluster

    We are running a cluster of four Windows 2000 Server boxes under WLS
              6.1SP2. We have seen the following behavior in our cluster. We shutdown
              a cluster member and then bring it back up. When it comes back up, the
              IIS plug-in seems to start routing all requests to that new server.
              Out cluster seems to have some multicast connectivity problems, e.g. we
              often cannot see managed servers on the admin. console, etc. What I'm
              wondering is whether the server when it comes up could be telling IIS
              that it is the only cluster member because it isn't aware of any other
              members. This would explain the plug-ins sudden affinity for the new server.
              Is this possible? Has anyone seen this?
              Thanks in advance,
              Coty
              P.S. The box that is being restarted and then hogging the requests is
              also the server where the admin. console is running. Could that be the
              issue? What exactly are the implications of running a managed server and
              the admin. console on one box?
              

    Is it that the admin server is also part of the cluster and is the server
              that is being restarted?
              Try to have the admin server for purely administrative tasks and not as part
              of a working cluster.
              If you have Debug set to ON in the plugin end, try checking the server list
              http://IISServer:port/dummyQuery?__WebLogicBridgeConfig
              This should return the dynamic and static server list that the IIS proxy is
              supposed to forward.
              Check before restart and after restart.
              Also contact support to get the newest ISAPI plugin that contains latest
              fixes.
              -Sabha
              "Coty Rosenblath" <[email protected]> wrote in message
              news:[email protected]
              > We are running a cluster of four Windows 2000 Server boxes under WLS
              > 6.1SP2. We have seen the following behavior in our cluster. We shutdown
              > a cluster member and then bring it back up. When it comes back up, the
              > IIS plug-in seems to start routing all requests to that new server.
              >
              > Out cluster seems to have some multicast connectivity problems, e.g. we
              > often cannot see managed servers on the admin. console, etc. What I'm
              > wondering is whether the server when it comes up could be telling IIS
              > that it is the only cluster member because it isn't aware of any other
              > members. This would explain the plug-ins sudden affinity for the new
              server.
              >
              > Is this possible? Has anyone seen this?
              >
              > Thanks in advance,
              > Coty
              >
              > P.S. The box that is being restarted and then hogging the requests is
              > also the server where the admin. console is running. Could that be the
              > issue? What exactly are the implications of running a managed server and
              > the admin. console on one box?
              >
              

  • AWR report problem after cluster node switch.

    Hello all. I have some strange problem, can any one advice what to do....
    I have OracleDB (Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 on Solaris x86_64), we have two server nodes and one shared storage attached to them, db is running on node1 and if it dies db will be switched to node2, classic cluster.
    Some time ago we tested this switching, so i shut downed db and switch it to node2, and startup it there (oracle_homes are identical), every thing was ok, soo i switched it back to node1. But now i can't run awrrpt.sql or awrinfo.sql, it gives error like this:
    Using the report name awrinfo.txt
    No errors.
    create or replace package body AWRINFO_UTIL as
    ERROR at line 1:
    ORA-03113: end-of-file on communication channel
    No errors.
    ERROR:
    ORA-03114: not connected to ORACLE
    And in alert log:
    ORA-07445: exception encountered: core dump [SIGSEGV] [Address not mapped to object] [509] [] [] []
    I tried to drop AWR with catnoawr.sql and recreate it with catawrtb.sql, everything seems to be fine, but still can't run awrrpt.sql or awrinfo.sql, same error.
    Any one familiar with such problem ?
    Thanks for advice.

    I understand that I provided less than satisfactory amount of info.
    So here is more.
    I am installing the two node cluster and during scinstall one of the nodes is being rebooted
    and goes through (what I am suppose to be) an initial configuration. At the very end of the
    boot process there is a message
    obtaining access to all attached disksAt this point the boot disk activity LED is lit constantly. After some longish timeout
    the following message is printed to console
    NOTICE: /[email protected],0/pci1014,[email protected],2: port 0: device reset
    WARNING: /[email protected],0/pci1014,[email protected],2/[email protected],0 (sd1):
         Error for Command: read(10)          Error Level: Retryable
         Requested Block: 135323318          Error Block: 135323318
         Vendor: ATA                    Serial Number:
         Sense Key: No Additional Sense
         ASC: 0x0 (no additional sense info), ASCQ: 0x0, FRU: 0x0and the disk activity LED is turned off. After that nothing more happens. The system isn't
    hard hang, since the keyboard is working, and it responds to ping, but other than that
    nothing seems to be functioning.
    I understand that diagnosing such a problem isn't easy, but I am willing to invest some
    time into getting it working. I would rally appreciate some help with this issue.
    Regards,
    Cyril

  • Session problem in cluster

    Hello!
              We have 3 servers, one main server (A) and 2(B,C) managed servers in
              cluster.
              All requests will always go to server B first, if it is run.
              Assume, that session have been created on server B. Since, We have the
              cluster, this session must be replicated to server C.
              Next, I shut down server B from cluster. And everything is ok, session is
              alive. All requests go to server C.
              Next, I run server B.
              The problem is in following: the existing session from server C isn't
              replicated to server B :(
              So, if my request goes to server B first, there is no session on it !
              The problem is not with session only, I think, that the problem is in all
              objects, that must be replicated. How to replicate all objects, that must be
              replicated, to a new started up server.
              Help, please !
              Thank you
              in advance.
              

              We had some funky problems with in-memory replication.
              They were not exactly as you described, but somewhat similar.
              We use Apache plugin to proxy our weblogic cluster. It turns out we had an old versino
              of the apache proxy and this caused all the strange behavior.
              I'm not sure if this will help you at all, but I thought I would mention it, just
              in case.
              "Seeniraj" <[email protected]> wrote:
              >
              >We are also seeing exactly the same behaviour!
              >Any experts who can help us?
              >We are using WLS 6.1 SP2
              >
              >Thanks,
              >Seeniraj
              >
              >"shark79" <[email protected]> wrote:
              >>Hello!
              >>
              >>We have 3 servers, one main server (A) and 2(B,C) managed servers in
              >>cluster.
              >>All requests will always go to server B first, if it is run.
              >>
              >>Assume, that session have been created on server B. Since, We have the
              >>cluster, this session must be replicated to server C.
              >>Next, I shut down server B from cluster. And everything is ok, session
              >is
              >>alive. All requests go to server C.
              >>Next, I run server B.
              >>
              >>The problem is in following: the existing session from server C isn't
              >>replicated to server B :(
              >>So, if my request goes to server B first, there is no session on it !
              >>
              >>The problem is not with session only, I think, that the problem is in all
              >>objects, that must be replicated. How to replicate all objects, that must
              >>be
              >>replicated, to a new started up server.
              >>
              >>Help, please !
              >>
              >>Thank you
              >> in advance.
              >>
              >>
              >>
              >>
              >>
              >
              

  • Saplpd problem

    Hi friends,
    I have a problem with saplpd.
    When ever my user tries to take print with the output device LOCL, the user is not getting the printout .
    Following is the saplpd error messages:
    <b>"Error:StartPage failed ret=0,error =Overlapped I/O Operation is in progress
    Error:Error-1 from NEWFRAME. Disk full?
    Error:put_block failed at new_page[]
    Error:BG:saplpd_close_dc failed,msg=808 SAPLPD:Windows Problem,siehe SAPLPD protokoll"</b>
    I checked the version of saplpd, It is 6.22
    There is enough free sapce in user's laptop disk
    Please suggest me the solution.
    Thanks in Advance
    Naveen

    Hi,
    I am having a similar problem.
    I am using SAP R/3 4.6c, SAPLPD version is 6.28.
    When I am printing using 'F'-Frontend printing, it is giving below error in SAPLPD:
    =========================================================
    (11:34:55 AM) Start printing job 00181pir.DAP on printer LPBOM047 ON NTBOMFS003 (FROM 0-CCZ2K017370) IN SES
    (11:34:55 AM) Error: Cannot create Printer Context, text = Overlapped I/O operation is in progress.
    (11:34:55 AM) Error: The printer LPBOM047 ON NTBOMFS003 (FROM 0-CCZ2K017370) IN SES is unknown to Windows Print Manager.
    (11:34:55 AM) The following printers are currently defined:
    (11:34:55 AM) Printer = LPBOM047 ON NTBOMFS003 (FROM 0-CCZ2K017370) IN SESSION 12
    (11:34:55 AM) Warning: Printer name contains spaces.
    (11:34:55 AM) Please rename printer, before using it from R/3 or UNIX!
    (11:34:55 AM) Printer = LPBOM017 ON NTBOMFS003 (FROM 0-CCZ2K017370) IN SESSION 12
    (11:34:55 AM) Warning: Printer name contains spaces.
    (11:34:55 AM) Please rename printer, before using it from R/3 or UNIX!
    (11:34:55 AM) Printer = /145.247.52.146/PL6I-ST10 ON HTTP: (FROM 0-CCZ2K017370) IN SESSION 12
    (11:34:55 AM) Warning: Printer name contains spaces.
    (11:34:55 AM) Please rename printer, before using it from R/3 or UNIX!
    (11:34:55 AM) Printer = MICROSOFT OFFICE DOCUMENT IMAGE WRITER (FROM 0-CCZ2K017370) IN SESSION 12
    (11:34:55 AM) Warning: Printer name contains spaces.
    (11:34:55 AM) Please rename printer, before using it from R/3 or UNIX!
    (11:34:55 AM) Printer = THINPRINT
    (11:34:55 AM) Printer = HOSTPRINT
    (11:34:55 AM) Printer = ADOBE PDF
    <b>(11:34:55 AM) Warning: Printer name contains spaces.
    (11:34:55 AM) Please rename printer, before using it from R/3 or UNIX!</b><b>(11:34:55 AM) Error: BG: saplpd_open_dc failed, msg = 808 SAPLPD:Windows Problem, siehe SAPLPD Protokoll</b>
    ==============================================================
    The spool & output requests are successful however, it shows "<i>Possibly printed"</i> in the output request log.
    Kindly advice what should be done.
    Thanks and regards,
    Kunal Patel.

  • Problem with cluster table in HR

    Hi everybody
    We are testing TDMS in HR and I have a problem: we want to transfer spanish cluster (PCL2) to the receive system, for this table the entry is transported
    but if I execute transaction pc_payresult the tables of the cluster don´t appear, we used all the cluster tables in the activity transfer selection criteria but the results
    are de same.
    Could please help me?
    Regards

    Hello,
    the best thing to do is to create an OSS message with the component XX-PROJ-DMS-HR if the following don't help:
    1) have you checked in the PCL2 in the target system with SE16 that the entries really are there for the RE and CU clusters?
    2) what does the protocol of the "confirm" function say (are the PCL2_RE, PCL2_CU and WPBP_RGDIR mentioned?) 
    3) if the protocol doesn't mention these data types then maybe the "Payroll Cutoff" date is set so that no results are found.
    Hope this helped.
    Gerard White.

  • Problem to cluster novell-named dns

    I have the novell-dns running on one node and I try to make it cluster enabled on an NSS-pool.
    I follow the documentation which is very confusing.
    It's really not clear, if we have to create a LUM-enabled user called "named" with UID 44 or just keep on using the local "named" user ?
    Actually if you create a lum user with the same name and uid as a local user it gives problem...
    And if you use the default user, it does not work, the rights are not set up on the NSS pool.
    Does anyone already clustered a novell-named DNS ?
    Thanks
    Sylvain

    Hello,
    Don't be sorry you were very helpful.
    I think I have finally found a solution to make it work:
    - Create the DNSVOL on NSS shared pool
    - Set the Novell DNS on every nodes on the cluster ( do not create DNS servers )
    - Create a LUM user "novellnamed" for example ( use default UID, primary group DNSDHCP-GROUP)
    - run the novell script ncs_sh with correct parameters
    - Make sure the LUM user has file trustee rights on /media/nss/DNSVOL/etc/opt/novell/named
    - Create a DNS server for the NCP virtual server of the NSS shared pool.
    - Then add the load and unload command in the cluster resource script, be careful to mention the novell volume name after the -V option and not the nss path: /opt/novell/named/bin/novell-named -u novellnamed -d 5 -V DNSVOL
    - If you have errors in the /var/opt/novell/log/named/named.run, check that the LUM user is owner with sufficient rights in :
    /var/opt/novell/run/named & /var/opt/novell/log/named.
    This worked fine for me, but the documentation is definitely very confusing.
    Thanks and very happy new year !
    Sylvain

  • A transaction problem in cluster environment,help!

              I need to take a complicated data operation which will have to call sevearl SQL
              sentences to add datas into DB in a circle. In order to minimize the cost of DB
              connection, I use one connection to create 5 statements,which are used to add
              datas repeatedly. You can read the corresponding codes below. These codes run
              very well in stand-alone environment,but problem occurs when changed to cluster
              environment. The console shows that it's timeout because the transaction takes
              too long time. But when it runs in stand-alone environment,it completes in less
              than one second! In both situations I use the same TX data source. I guess when
              changed to cluster environment,the transaction processing becomes very complicated
              and then it leads to dead-lock. Anybody agrees with this, or has any experience
              about it before? Help,thanks a lot!
              conn = getConnection();
              pstmt3 = conn.prepareStatement
              (DBInfo.SQL_RECEIPTPACK_CREATE);
              pstmt4 = conn.prepareStatement
              (DBInfo.SQL_RECEIPT_CREATE);
              pstmt5 = conn.prepareStatement
              (DBInfo.SQL_RECEIPTPACKAUDIT_INSERT_ALL);
              pstmt6 = conn.prepareStatement
              (DBInfo.SQL_RECEIPTAUDIT_INSERT_ALL);
              int count = (endno+1-startno)/quantity;
              for(int i=0;i<count;i++)
              int newstartno = startno +
              i*quantity;
              int newendno = newstartno +
              quantity - 1;
              String newStartNO =
              Formatter.formatNum2Str(newstartno,ConstVar.RECEIPT_NO_LENGTH);
              String newEndNO =
              Formatter.formatNum2Str(newendno,ConstVar.RECEIPT_NO_LENGTH);
              pstmt1 = conn.prepareStatement
              (DBInfo.SQL_RECEIPTPACK_SEQ_NEXT);
              rs1 = pstmt1.executeQuery();
              if(!rs1.next()) return -1;
              int packid = rs1.getInt(1);
              cleanup(pstmt1,null,rs1);
              pstmt3.setInt(1,packid);
              pstmt3.setString(2,newStartNO);
              pstmt3.setString(3,newEndNO);
              pstmt3.setInt(4,quantity);
              pstmt3.setLong(5,expiredt);
              pstmt3.setInt
              (6,ConstVar.ID_UNIT_TREASURY);
              pstmt3.setInt
              (7,Status.STATUS_RECEIPTPACK_REGISTERED);
              pstmt3.setLong(8,proctm);
              pstmt3.setInt(9,procUserid);
              pstmt3.setInt
              (10,ConstVar.ID_UNIT_TREASURY);
              pstmt3.setInt(11,typeid);
              pstmt3.addBatch();
              //audit
              pstmt5.setInt(1,procUserid);
              pstmt5.setInt(2,packid);
              pstmt5.setInt
              (3,OPCode.OP_RCT_RGT_RECEIPTPACK);
              pstmt5.setLong(4,0);
              pstmt5.setLong(5,proctm);
              pstmt5.addBatch();
              for(int
              j=newstartno;j<=newendno;j++)
              String receiptNO =
              Formatter.formatNum2Str(j,ConstVar.RECEIPT_NO_LENGTH);
              pstmt2 =
              conn.prepareStatement(DBInfo.SQL_RECEIPT_SEQ_NEXT);
              rs2 =
              pstmt2.executeQuery();
              if(!rs2.next()) return -
              1;
              int receiptid =
              rs2.getInt(1);
              cleanup
              (pstmt2,null,rs2);
              pstmt4.setInt
              (1,receiptid);
              pstmt4.setString
              (2,receiptNO);
              pstmt4.setInt
              (3,Status.STATUS_RECEIPT_REGISTERED);
              pstmt4.setDouble
              (4,00.0);
              pstmt4.setInt(5,0);
              pstmt4.setDouble
              (6,00.0);
              pstmt4.setDouble
              (7,00.0);
              pstmt4.setDouble
              (8,00.0);
              pstmt4.setInt
              (9,procUserid);
              pstmt4.setLong
              (10,proctm);
              pstmt4.setLong
              (11,expiredt);
              pstmt4.setInt(12,0);
              pstmt4.setInt
              (13,packid);
              pstmt4.setInt
              (14,typeid);
              pstmt4.addBatch();
              //audit
              pstmt6.setInt
              (1,procUserid);
              pstmt6.setInt
              (2,receiptid);
              pstmt6.setInt
              (3,OPCode.OP_RCT_RGT_RECEIPTPACK);
              pstmt6.setLong(4,0);
              pstmt6.setLong
              (5,proctm);
              pstmt6.addBatch();
              pstmt3.executeBatch();
              cleanup(pstmt3,null);
              pstmt5.executeBatch();
              cleanup(pstmt5,null);
              pstmt4.executeBatch();
              cleanup(pstmt4,null);
              pstmt6.executeBatch();
              cleanup(pstmt6,null);
              

    Hello,
    Are you using any kind of Load Balancer, like an F5. I am currently troubleshooting this issue for one of our ADF apps and I originally suspected the F5 was not sending traffic correctly. We have not set the adf-config file for HA and the dev team will fix that. But my concern is that will just hide my F5 issue.
    Thanks,
    -Alan

  • Problem in Cluster Table Maintenance in sm34

    Dear ABAP Experts,
    I am new to abap. I am struck in a problem. I have created a View Clusters to maintain database tables. (in se54)
    But when I go and try to maintain the fields of database tables: In "new entries" I am able to add only one fild and for other field I need to select from the option that appear from F4. I want to be able to add,new entries in all the fields.
    How to do this. WHere did I do a mistake..
    I found a similar thre3ad in this forum :Display/maintenance allowed with restrictions | SCN
    But in the correct reply: go to se80 and insert the name of your function group. Double click on your screen and click the button "Layout". This show the image of dynpro of sm30. Double click in the column that you want it is non-editable and in your atributes check "only output".
    ---> I am unable to find the LAYOUT button in se38
    Plz refer the screen shots.
    Looking forward for your suggestions.
    Regards
    Chandan

    Dear Jozef,
    Thanks for your reply.
    The problem is during NEW ENTRIES. When I click the new entries button, then I want to add new data. But I am able to add new data for Kunde but not for Kunde Code and KunceCdRef. For Kunde code and KundeCdRef I am able to add the same data that are already exixyting in the database table.
    For Eg: in The Master data I have the following data for Kunde, Kunde Code and KundeCdRef.
    Kunde           Kunde Code      KundeCdRef
    DAMYS         DAS                000
    MeSys           MOS               000
    BASF            FRE                 090
    Intelli             INT                   000
    Unkelbach     UNK
    Biotest          BIO
    Now When in sm34 Through New Entries when  I want to  add the following data (Kunde= MSoft, KundeCode = MST and KundeCdRef = 012), then I am able to populate Kunde = MSoft but in KundeCode & KundeCdRef = I need to choose from the above Kunde Code and Kunde CDRef only)
    I hope I was able to clear my problem more properly.
    Looking forward for a solution.
    Regards
    Chandan

  • Problems installing Cluster 3.3.2-SPARC

    Attempting to install Solaris Cluster 3.3.2-SPARC on an Ultrasparc T5140 w/ Firmware 7.2.10.a and running Solaris 10 (sunOS 5.10 Generic_147147-26 sun4v sparc
    cd /cdrom/cdrom0/Solaris_sparc/
    ./installer
    "The installer you have invoked can run only in  platform.  Please invoke the installer for Solaris_sparc platform."
    ./installer -nodisplay
    "The installer you have invoked can run only in  platform.  Please invoke the installer for Solaris_sparc platform."
    /cdrom/cdrom0/Solaris_sparc/installer
    Usage: dirname [path]
    /cdrom/cdrom0/Solaris_sparc/installer: /bin/basename,/usr/bin/basename,/usr/usb/basename: not found.
    /cdrom/cdrom0/Solaris_sparc/installer: /bin/basename,/usr/bin/basename,/usr/usb/basename: not found.
    /cdrom/cdrom0/Solaris_sparc/installer: /bin/cut,/usr/bin/cut: not found.
    /cdrom/cdrom0/Solaris_sparc/installer: /bin/cut,/usr/bin/cut: not found.
    You must be root to run this script.
    id
    uid=0(root) gid=0(root)
    copied entire contents of disc to /Solaris\ Cluster\ 3.3.2-SPARC
    chown -R root:root /Solaris\ Cluster\ 3.3.2-SPARC
    Did the exact same process as detailed above with the exact same results (except it says /Solaris Cluster 3.3.2-SPARC/Solaris_sparc/installer: ... for error messages)
    Can't for the life of me figure out why it won't do what it's supposed to...  Any thoughts?

    prtdiag -v - Pastebin.com
    df -k - Pastebin.com
    zoneadm list -cv
      ID NAME       
    STATUS
    PATH                     
    BRAND
    IP  
       0 global     
    running
    native   shared
    which basename
    /usr/bin/basename
    ls -la /usr/bin/basename
    -r-xr-xr-x   1 root
    bin  
    10064 Jun 30  2006 /usr/bin/basename
    the osc_4_2_repo_full is the solaris cluster 4.2 full repo, downloaded it out of desperation, realizing after the fact that it won't work with Solaris 10.

  • MDB connection problem in cluster

    Hi,
    I am running a cluster with two managed server as ManagedServer1 and ManagedServer2. I have targeted JMS services at Migratable target with prefrred server as ManagedServer1 and Migaration basis for cluster is "Database". Now when i start ManagedServer1 then JMS services get started and MDB on ManagedServer1 is also get connected. But when i start ManagedServer2 then MDB is successfully deployed but couldn't able to connect to Topic. When i resume MDB from console then it will get connected.
    Appreciating your help in advance.
    Regards
    Vikash Jain
    Edited by: VikashJ on Feb 19, 2009 2:07 AM

    No there were no error in log. Only statement stating that MDB is not connected to destination.
    Regards
    VikashJ

  • Problems running cluster example

    when i run the cluster examples, i hav some output in the server
              console:
              Thu Nov 02 13:26:14 CET 2000:<I> <ConflictHandler> ConflictStop
              cluster.ejb.TellerHome_EO:examples.cluster.ejb.teller.TellerBeanEOImpl_WLStub
              (from
              [email protected]:[7001,7001,7002,7002,7001,-1])
              Thu Nov 02 13:26:14 CET 2000:<I> <ConflictHandler> ConflictStop
              cluster.ejb.TellerHome:examples.cluster.ejb.teller.TellerBeanHomeImpl_WLStub
              (from
              [email protected]:[7001,7001,7002,7002,7001,-1])
              Thu Nov 02 13:26:14 CET 2000:<I> <ConflictHandler> ConflictStop
              cluster.ejb.AccountHome:examples.cluster.ejb.account.AccountBeanHomeImpl_WLStub
              (from
              [email protected]:[7001,7001,7002,7002,7001,-1])
              whats wrong here?
              

    Rebuild them separately on both machines and deploy them again. Typically you see
              if they are different versions or the object is not clusterable.
              - Prasad
              Reto Meier wrote:
              > when i run the cluster examples, i hav some output in the server
              > console:
              >
              > Thu Nov 02 13:26:14 CET 2000:<I> <ConflictHandler> ConflictStop
              > cluster.ejb.TellerHome_EO:examples.cluster.ejb.teller.TellerBeanEOImpl_WLStub
              > (from
              > [email protected]:[7001,7001,7002,7002,7001,-1])
              >
              > Thu Nov 02 13:26:14 CET 2000:<I> <ConflictHandler> ConflictStop
              > cluster.ejb.TellerHome:examples.cluster.ejb.teller.TellerBeanHomeImpl_WLStub
              > (from
              > [email protected]:[7001,7001,7002,7002,7001,-1])
              >
              > Thu Nov 02 13:26:14 CET 2000:<I> <ConflictHandler> ConflictStop
              > cluster.ejb.AccountHome:examples.cluster.ejb.account.AccountBeanHomeImpl_WLStub
              > (from
              > [email protected]:[7001,7001,7002,7002,7001,-1])
              >
              > whats wrong here?
              

  • Deployment problem in cluster

    Hi,
    I have a bea cluster configured among two physical servers
    First machine has the admin server configured. It also has a managed server configured in the cluster named "cluster" . The application ear file is copied on to this server only (No shared storage is available)
    second machine has one managed server configured in the same cluster "cluster"
    When I have done the deployment onto the "cluster" everything worked fine. I am able to access the applicatio through both the managed server's urls.
    Then for testing purpose, I shutdown the first server which has the admin server. Still the application continued to work on the second server
    Then I have restarted the managed server on the second machine by keeping the first machine shutdown, the managed server started in ADMIN mode, and is refusing the application requests.
    can anyone suggest any workaround ??
    Thanks
    Ushas Symon

    Hi,
    1)start the adminserver
    2)restart the secondary server
    -Paul

Maybe you are looking for

  • Why BADI-- Z_implenation is in BLUE color, even though activated!

    HI Experts, I hv been created a Z_Implementation for BADI_MATERIAL_CHECK-->Method-CHECK_DATA-->ABAP Editor wriiten the code! 1 - Tried to activate, but got the error, saying that the Interface is not existing in Z_class--> By mistake, I have choosen

  • Convert XML to flat file with File adapter

    Hi all. Trying to configure a file adapter according to the following link. http://help.sap.com/erp2005_ehp_04/helpdata/EN/d2/bab440c97f3716e10000000a155106/frameset.htm What i want it to do is the following. I have the following incoming message: <h

  • Connecting your IPOD to your Car using a Pioneer Radio Adapter

    Is there any easier way you can watch your videos on your IPOD using your Radio (Pioneer) Adapter. I had it working 3 times but the problems seems to be after I shut my car off, the adapter or the IPOD will not allow me to go back into the menu. I kn

  • IMac-Green light nothing more....

    I work for a large school district and am having the same issue with several iMac machines. I get a green light and nothing more, no chime, no HD activity, nothing... Here is what I have done. Reset PMU, changed battery, swapped with known good RAM,

  • CF9.0.1 and Flex4 Remoting Issue

    We are trying to migrate our flex apps from CF8.0.1 to CF9.0.1 and we are getting an error that seems to be caused when trying to create a VO which is typed to a CFC that is in a directory below the webroot. This was working in CF8.0.1. The UserVO.as