SAPLPD vers.6.22 and Local port printers problem

Dear all,
We have old saplpd ver.6.03, print server with low performance and now I've installed now win 2003 and sapGUI 640 Final Release
with saplpd 6.22.
For the network printers - they are installed as standard TCP/IP port.
For printers that are attached to clients PC I'm installing them as Local port printers.
Then on SAP R/3 4.6C (Oracle 9.2.0.5 HP-UX) spad install new printer on the new print server as destination host.
Network printers work fine.
Problem is on the localy attached printers. On SP01 for all users and for that output device I see no errors all print request have status complated. And also on the saplpd log everything is OK,
"Printjob PRD0000007850_1 reported as done".
I don't see any error but the problem is there is NO PAPER printed.
I've tested on many types of printers like Lexmark T614, HP 1200 and others. Every time the problem is when I've installed the printer as Local port.
If I change the destination host to the old saplpd server everything is ok, and the paper is printed.
Please help, the old saplpd server will be very soon moved to retirement.
Thanks
Ruzica

I also have that problem in KDE. I have an external HD with firewire or USB input.
My external disk is mounted successfully, but reading directories of the external disk in Konqueror makes all Konqueror instances freeze for some time (just the same as your problem). Even accessing external folders from konsole makes the konsole freeze for some time.
And another strange thing happens: when the external disk is mounted pacman hangs after looking for inter-conflicts... done. As soon as i switch off the HD, pacman goes on working...
When mounting the HD via Firewire the problems are greater than via USB.
I just downgraded my kernel to kernel26-2.6.20.10-1 and everything works perfect!

Similar Messages

Currently running process name list and local port list display using java

HI
I have for truble to display Process name list and that process running local port number...
like this output from java
process localport
======= ========
ccApp 1096
orbd 1050
postmaster 5432
skype 443
MSTask 1051
can help any one with sample code Explain sample code wtih , this thread or . if you found sample code please send me [email protected]
Best Regards
P.SASIKUMAR

If it's possible for C++ ,. can you give me the best sample and how to interact to java todisplay this result....

Remote and Local Site Sync Problems

I have a customer who is using Dreamweaver CS4 on Mac OS X. Dreamweaver is setup to have a local site as our development server(win 2k3) and the remote site as our live web server(win 2k3). The folder structure on both the development and live web server is the same. When you view the path in the manage site window of dreamweaver it shows both remote and local site listed as /Volumes/www/Data. When dreamweaver connects to both of these to sync the files nothing happens since it sees them as the same place.
I have looked in the /Volumes folder on the customers computer and two listings appear for the servers www and www-1. This is not what dreamweaver shows and if you repoint the link to the www-1 folder it just changes back to www.
I have tried to create alias' and symbolic links to distinguish one folder from the other however nothing I seem to change has any effect.
If you use finder on the machine it can distinguish between the two folders I just need to figure out how to make dreamweaver do the same.
Any assistance on this would be greatly appreciated.

Unfortunately no I do not have a solution. I was not able to find out at the time and the problem went away with the migration to a content management system for our web server. Also the Develpment team changed hands and the new people all use windows machines.
Good Luck trying to find a solution.

Scsi emulation and parallel port printers

I'm attempting to get a Microtek ScanMaker V300 installed on my laptop. I've read the man sane-microtek2 but have great difficulty interpretting man pages at the best of times.
I have a port listed as /dev/parport0 at 0x378, or /dev/lp0 but no /dev/scanner or /dev/sg(x)
Being hardware illiterate I'm at a loss. Seems to have something to do with scsi emulation ??. Just how is the device created.
Any help appreciated (BTW Kernel 2.6.17 sane synced up to date).
The file /etc/sane.d/microtec2.conf exists in the filesystem.
Where to start?
Richard

Mixed news - I have solved one problem only to discover another!
Here's how I managed to get KDE adding printers again:
# pacman -Rd cups libcups
# rm -r /etc/cups
# pacman -S cups libcups
But I find that I cannot scan reliably with the HP PSC 500, getting either a "busy" or "i/o error" message when running XSane; or else it usually loads with scan resolution = 0 instead of 75. But sometimes (say 10%) it works!
I also found the sane-troubleshoot program from http://www.meier-geinitz.de/sane/sts/ and it reports:
[hpaio] failed to open scan channel: scan/sane/hpaio.c 665
<-- sane_open (hpaio:/par/PSC_500?device=/dev/parport0): Device busy
- OR -
[hpaio] scl.compat1150=<5300A>: scan/sane/hpaio.c 1808
[hpaio] SclSendCommand: size=6 bytes_wrote=0: scan/sane/scl.c 199
[hpaio] [0000] 1B 2A 73 31 39 45 .*s19E
<-- sane_open (hpaio:/par/PSC_500?device=/dev/parport0): Error during device I/O
Also, I wonder whether this comment from http://www.xs4all.nl/~ljm/SANE-faq.html#43 is significant:
7.7. I'm using IDE over SCSI and I keep getting IO-error under xsane.
The IDE via SCSI driver seems to create problems. Please advise the mailing list.
Just checked again, and I can scan fine with the HP PSC 500, running from the Knoppix 5.3.1 live DVD.

How to specify a local port but it should not be bound

Hi all,
i am developing a client app that connects to a server...
for example i have the constuctor of a socket that connects to a server..the server requires the ipaddress and local port of the client for security reasons...so my socket constructor looks like this client = new Socket (remote ipaddress, remote port, local ipaddress, local port) ..this works fine...but the problem is that the server sends messages to the local port.....how do i make sure that java does not bind..the local port..i mean for it to be freed..cos it seems java is binding it.
Thanks.

there is a Server (Not a java program) that requires
clients to connect to it using the following kind of
connection below:
a java client connects to the server with this socket
constructor
Socket ss = new Socket (remote ip, remote port, local ip, local port);This is your first problem. There is no such kind of server. The server will know the client's local port regardless of which Socket constructor the client uses, as someone else pointed out. Leave out the last two parameters.
now the
server sends responses to the local port specified in
the constructor of the socket.or the local port assigned by the system if it wasn't specified, as it almost always shouldn't be.
I need to create a listener on the localport
so i can read the information sent in from the serverAHA!!!!!!! NO YOU DO NOT. You need to execute a read on the client socket. That's what it's for. It already represents an established connection between a client local port and the server.
..creating
this ServerSocket ss = new ServerSocket
(localport); in jave generates an "Address
Already in Use Exception".As expected. It is.
now what i asked was "how
can i unbind the local port form the socket so java
will not tell me it is already in use when creating a
listener on it in ServerSocket".You don't want to do this as explained before. FYI you could close the Socket to release the port, but you will then discover that the server sends fail because it tries to send to the established connection.
I hope this is clear now.Clear as mud. What is clear is that you do indeed need to read up on TCP/IP as recommended by several other posters. Your grasp is very slender.

Webutil and local printers / ports

Hi,
is there a way in Webutil to use local printers installed in Windows? I want to specify wich printer to use, and to write or spool to that printer (e.g. a bar-code printer).
Other question is: how to communicate (in a webform) with a local port in the client (serial or parallel). We need this because we have precision balances and other instruments interfaced.
Thx
Gabor

Gabor,
no there is no local printer support in webutil as far as I know. You can obtain a list of local printers through a Java Bean that you can write and add to the Forms client. The Java 2 development kit contains a print API that can be used to get the names of installed printers (make sure the bean file is signed)
The same for serial ports: You have to write a Java Bean and sign the jar files. You can talk to serial ports with Java and to my understanding this is documented on www.javasoft.com
Fran

Receiver and transmitter on the same local port?

Hi,
Just got a couple of questions:
1. Is JMF 2.1.1e capable of using the same local port for receving and transmitting audio (say in PCMU), i.e. symmetric RTP?
2. If yes, then Im just facing a problem and once I assign the same local port, I end up with one-way audio, because my transmitter is not working for some reason... :( The way I create transmitter on the same local port as the receiver, is by reusing the same RTPManager that was created for the receiver on the first place. Is there anything I need to add to make it work properly?? Btw, the media code is borrowed from old SIP Comm project (just in case anyone knows, otherwise, ignore this).
I'd appreciate any help!
Andrey.

I found solution. There is an existing thread for this, actually :) Anyone interested, go to http://forum.java.sun.com/thread.jspa?threadID=589850&messageID=3064538
In short, i took AVReceive3, AVTransmit3 and RTPSocketAdapter files, created another class to start receiver and transitter (called it TempManager) and passed this TempManager in the arguments to both (like an owner or smth). Then transmitter is started first and saves created RTPManager's to the TempManager instance, and when receiver starts, it just takes already created RTPManager's from TempManager and uses them to initialize by itself... I just took a .wav file after that and played between accross local net between 2 hosts. Works really fine, however i still need to port all these into my app. :)

Local port

Hi there.
I have a problem with printing on a printer connected via a local port on Server 2012R2. Directly generated printouts from the print server is ok, but print from another computer via a printer share always ends with an error. Error does not apply the printers
connected via port tcp/ip
Any help will be appreciated.
Thanks.

Hi,
-->but print from another computer via a printer share always ends with an error.
Would you please let me know how configure the shared printer? Meanwhile, would you please let me know the complete error message that you get?
Print Management Step-by-Step Guide
In addition, did you open Event Viewer and check if find more clues? Please also refer to following article and check if help you to troubleshoot.
Troubleshooting Windows Server 2012 Printing
If anything I misunderstand or any update, please don't hesitate to let me know.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Cannot ping and scan ports of network printer

Hello,
I installed an Archlinux to my work place computer, and I configure everything, network is working I can ping Dns and other local hosts, but I cannot ping and scan ports of network printer HP Laserjet 1320n which is connected on same network in which all computers ip's are 10.0.2.X like and the priter IP is 169.254.154.167.
Cups is configured and working, I also install and configure according to wiki's avahi, nss-mdns, I try with dnsmasq, but nothing helps. The hp-setup and system-configure-printer is detecting printer, I add it and configure it, but I cannot print. Cannot connect and communicate with printers Jetdirect port.
Along with the Arch I have Ubuntu and WindowsXP installed, with them everything is working, I also install Manjaro but there was the same problem like in Arch.
Please help me! Thank you in advance.

^ These addresses are known as autoconfiguration addresses
Addresses in the range 169.254.0.0 to 169.254.255.255 are used automatically by most network devices when they are configured to use IP, do not have a static IP Address assigned and are unable to obtain an IP address using DHCP.
http://www.iana.org/go/rfc5735 You shouldn't consider this problem fixed
Last edited by Spider.007 (2014-01-17 18:12:29)

Need help with ASA 5512 and SQL port between DMZ and inside

Hello everyone,
Inside is on gigabitEthernet0/1 ip 192.9.200.254
I have a dmz on gigabitEthernet2 ip 192.168.100.254
I need to pass port 443 from outside to dmz ip 192.168.100.80 and open port 1433 from 192.168.100.80 to the inside network.
I believe this will work for port 443:
object network dmz
subnet 192.168.100.0 255.255.255.0
object network webserver
host 192.168.100.80
object network webserver
nat (dmz,outside) static interface service tcp 443 443
access-list Outside_access_in extended permit tcp any object webserver eq 443
access-group Outside_access_in in interface Outside
However...How would I open only port 1433 from dmz to inside?
At the bottom of this message is my config if it helps.
Thanks,
John Clausen
Config:
: Saved
ASA Version 9.1(2)
hostname ciscoasa-gcs
domain-name router.local
enable password f4yhsdf.4sadf977 encrypted
passwd f4yhsdf.4sadf977 encrypted
names
ip local pool vpnpool 192.168.201.10-192.168.201.50
interface GigabitEthernet0/0
nameif outside
security-level 0
ip address 123.222.222.212 255.255.255.224
interface GigabitEthernet0/1
nameif inside
security-level 100
ip address 192.9.200.254 255.255.255.0
interface GigabitEthernet0/2
nameif dmz
security-level 100
ip address 192.168.100.254 255.255.255.0
interface GigabitEthernet0/3
shutdown
no nameif
no security-level
no ip address
interface GigabitEthernet0/4
shutdown
no nameif
no security-level
no ip address
interface GigabitEthernet0/5
shutdown
no nameif
no security-level
no ip address
interface Management0/0
management-only
nameif management
security-level 100
ip address 192.168.1.1 255.255.255.0
ftp mode passive
dns server-group DefaultDNS
domain-name router.local
object network inside-subnet
subnet 192.9.200.0 255.255.255.0
object network netmotion
host 192.9.200.6
object network inside-network
subnet 192.9.200.0 255.255.255.0
object network vpnpool
subnet 192.168.201.0 255.255.255.192
object network NETWORK_OBJ_192.168.201.0_26
subnet 192.168.201.0 255.255.255.192
object network NETWORK_OBJ_192.9.200.0_24
subnet 192.9.200.0 255.255.255.0
access-list outside_access_in extended permit icmp any4 any4 log disable
access-list Outside_access_in extended permit udp any object netmotion eq 5020
access-list split standard permit 192.9.200.0 255.255.255.0
access-list VPNT_splitTunnelAcl standard permit 192.9.200.0 255.255.255.0
pager lines 24
logging asdm informational
mtu outside 1500
mtu inside 1500
mtu management 1500
mtu dmz 1500
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
nat (inside,outside) source static inside-network inside-network destination static vpnpool vpnpool
nat (inside,outside) source static NETWORK_OBJ_192.9.200.0_24 NETWORK_OBJ_192.9.200.0_24 destination static NETWORK_OBJ_192.168.201.0_26 NETWORK_OBJ_192.168.201.0_26 no-proxy-arp route-lookup
object network netmotion
nat (inside,outside) static interface service udp 5020 5020
nat (inside,outside) after-auto source dynamic any interface
access-group Outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 123.222.222.1 1
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
http server enable
http 192.168.1.0 255.255.255.0 management
http 192.9.200.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
crypto ipsec ikev1 transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec security-association pmtu-aging infinite
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs group5
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside_map interface outside
crypto ca trustpool policy
crypto ikev1 enable outside
crypto ikev1 policy 10
authentication crack
encryption aes-256
hash sha
group 2
lifetime 86400
crypto ikev1 policy 20
authentication rsa-sig
encryption aes-256
hash sha
group 2
lifetime 86400
crypto ikev1 policy 30
authentication pre-share
encryption aes-256
hash sha
group 2
lifetime 86400
crypto ikev1 policy 40
authentication crack
encryption aes-192
hash sha
group 2
lifetime 86400
crypto ikev1 policy 50
authentication rsa-sig
encryption aes-192
hash sha
group 2
lifetime 86400
crypto ikev1 policy 60
authentication pre-share
encryption aes-192
hash sha
group 2
lifetime 86400
crypto ikev1 policy 70
authentication crack
encryption aes
hash sha
group 2
lifetime 86400
crypto ikev1 policy 80
authentication rsa-sig
encryption aes
hash sha
group 2
lifetime 86400
crypto ikev1 policy 90
authentication pre-share
encryption aes
hash sha
group 2
lifetime 86400
crypto ikev1 policy 100
authentication crack
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 110
authentication rsa-sig
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 120
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 130
authentication crack
encryption des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 140
authentication rsa-sig
encryption des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 150
authentication pre-share
encryption des
hash sha
group 2
lifetime 86400
telnet 192.9.200.0 255.255.255.0 inside
telnet timeout 5
ssh timeout 5
ssh key-exchange group dh-group1-sha1
console timeout 0
dhcpd address 192.168.1.2-192.168.1.254 management
dhcpd enable management
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
ssl encryption aes128-sha1 3des-sha1
webvpn
enable outside
anyconnect image disk0:/anyconnect-win-2.5.2014-k9.pkg 2 regex "Windows NT"
anyconnect image disk0:/anyconnect-macosx-i386-2.5.2014-k9.pkg 3 regex "Intel Mac OS X"
anyconnect enable
tunnel-group-list enable
group-policy SSLVPN internal
group-policy SSLVPN attributes
dns-server value 192.9.200.13
vpn-tunnel-protocol ssl-client
split-tunnel-policy tunnelspecified
split-tunnel-network-list value split
default-domain value router.local
group-policy VPNT internal
group-policy VPNT attributes
dns-server value 192.9.200.13
vpn-tunnel-protocol ikev1 l2tp-ipsec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value VPNT_splitTunnelAcl
default-domain value router.local
username grimesvpn password 7.wersfhyt encrypted
username grimesvpn attributes
service-type remote-access
tunnel-group SSLVPN type remote-access
tunnel-group SSLVPN general-attributes
address-pool vpnpool
default-group-policy SSLVPN
tunnel-group SSLVPN webvpn-attributes
group-alias SSLVPN enable
tunnel-group VPNT type remote-access
tunnel-group VPNT general-attributes
address-pool vpnpool
default-group-policy VPNT
tunnel-group VPNT ipsec-attributes
ikev1 pre-shared-key *****
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
inspect icmp
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
Cryptochecksum:36271b5a1b9382621e14c3aa635e2fbb
: end

Hi Vibor. Apologies if my comment was misunderstood. What I meant to say was that the security level of the dmz interface should probably be less than 100.
And therefore traffic could be controlled between DMZ and inside networks.
As per thr security level on the DMZ interface. ....... that command is correct. :-)

DNS for internal network and Firewall ports?

Hello,
I don't know were to begin, so I guess I'll start with my setup.
I have Mac OS X server 10.5.7 running DNS, Firewall, Mail, iChat, RADIUS, VPN, SMB. Behind an Airport Base Station in DMZ.
My DSN setup is just for the server and local clients. I'm also setup to forward my ISP DNS.
My question is do I need to open any ports in the firewall. I currently have my local subnet 172.16.4.x to allow all. The "Any" subnet to allow DNS outbound. Is this correct or am I creating a security risk?
I dont want the public to be able to use my DNS server. (I would like to ONLY allow my local network, and VPN users.)
Thanks!
Message was edited by: Robert LaRocca

I always recommend going with a hardware device (including the base station) over IPFW when running a server.
The main reason is that when you're running behind a NAT device (such as the AirPort Base Station), ALL incoming traffic is blocked unless you specifically enabled it via port forwarding. A positive security model.
In contrast, Mac OS X Server will open firewall ports based on the services you're running, without regard to whether that service should be publicly accessible or not.
You then have to go through the motions of securing each service to either block external traffic at the service level (e.g. by telling the application what addresses it can listen to), or at the network level (by configuring the firewall to block external access). This is a bad security model since each service is public by default and you have to go out of your way to secure it.
Also bear in mind that you might not think this is a problem today since you can just configure IPFW and be done, but what about next week? or next month? or next year when you add another service. Will you remember to reconfigure the firewall to secure it then?

Using multiple MIDI in and out ports... is there a any solution?

Hi Guys,
I've been using Logic Pro for about 3 or 4 years, and have always struggled with the fact that when using external MIDI instruments, there are not separate drop-down menus for PORT IN and PORT OUT, where I could choose which port would be used on my MIDI interface.
I was previously a Cubase user, and it had these two ports, so I could easily choose, for example: "MIDI IN: Port B" and "MIDI OUT: Port C", and MIDI would be routed to those ports.
Logic only has one drop-down for selecting ports, and that is for the outgoing MIDI signal only.
My problem is that when we want to record say two synths at the same time, each on its own MIDI track, the incoming signals are blended and played on both active tracks.
There IS a tick-box option in Project Settings, called Auto demix by channel if multitrack recording, but this only works when all the channels in question are armed for recording. If we are just jamming ideas (but want to have MIDI set up ready to record... therefore local is off on each synth, etc...), it appears there is no way to separate the incoming MIDI signals so they only go back to their respective ports.
This issue has now compounded with the addition of two new synths in my studio... suddenly it's even more crucial to be able to easily separate the MIDI ports for each of the four synths.
I have never delved into the Environment, but was chatting to the guys in the music store I go to, and they were saying there might be a way of setting up the specific MIDI routing I am looking for, in the Environment.
I would love any assistance you could give me. This has become such a frustration that I have even looked at moving back to Cubase (but the way it handles lots of tracks at low latency on Mac is stopping me, at the moment! The trial version showed this up as a real issue, compared to Logic!).
I am of course secretly hoping that Logic Pro 10 will have a re-thought MIDI setup, with simple in and out port drop-downs for each MIDI track. But that's a long shot, and Logic 10 could still be ages away!
Any help an experienced user can offer me would really be appreciated.
Cheers,
Mike

discussed like ****
still no one ever did a simple explanation how to do , once for all in the environtment .
Please, i am ready even to pay someone who will show the techique

Sync problems with Vista, Desk Top Vers 6.2 and Tungson C

My wife recently bought a new cell phone with Palm Centro that loaded vers 6.2. My palm TC running OS 4.5 will not sync. If I try overighting either way I get duplicates in Address catagories but my datebook, Docs to go, address, memo, ToDo, and expences do not sync. I have lots of new data added to both the desktop and Palm but they stay in their respective enviorments. Any Ideas? I have cleaned out my desktop on my old PC, Windows XP, Palm vers 4.1 and am now using that. Go figure!!! Isn't new tech and upgraded vers great?
Post relates to: Tungsten C

You can use the same version of Palm desktop that you are using for the C on the Vista PC and the Centro should sync to that version.
You will need to "clean" uninstall the 6.2 version on the Vista PC. Install the version of Palm Desktop you got with the C. Create a username in Palm desktop for each device. Connect each device and then sync.
Here are the "clean" uninstall instructions for Vista.
You should first make a copy of your data to have just in case something
happens. You can find your data files by going to Start --> Documents -->
Palm OS Desktop. Highlight your Palm Desktop username and right click and
copy. Then go to your PC desktop right click on a blank spot and select paste.
Now you want to uninstall Palm Desktop and remove everything that has to do
with Palm Desktop from your computer.
Go to the following locations on the PC and delete the folders listed below.
C:\Program Files\Palm or Palm One
C:\Users\[Vista Login Name]\appdata\local\virtualstore\Program Files\Palm or
PalmOne
C:\Users\[Vista Login Name]\appdata
*Note you may need to view hidden folders to get to appdata. To do that go
into your control panel and open folder options. Go to view tab and uncheck
hide hidden files.
Once this is done you will need to delete some registry keys from your PC Operating System.
Word of warning, going here and deleting the wrong thing can cause your PC
from starting up, crashing and deletion of programs and data. If you feel
you are unsure of yourself, see if you have a friend that can help you or a
PC technician that you can pay to help you. This procedure will show them everything they need to delete. To make sure we have a good copy of the current registry, we need to do a backup of the Registry.
Go to start on the PC, in the search field type "regedit.exe" without quotes.
Highlight COMPUTER, go to File --> Export. Should pop up with a Save As box.
Current location is fine, should be in My Documents or save to a location you will remember. In the file name on the bottom type "backup[todaysdate]" i.e. backup07072008. Next, the hard part.
The easiest way to make sure your working with the correct key, highlight the key i.e. palm quick install, and press delete on your keyboard. It will ask you, are you sure. Say yes. Do the same thing for all keys below.
If you make a mistake, stop what you are doing. And call a PC technician.
BUT do not turn off your computer.
The reg keys are as follows (Note: some of theses reg keys will not be here
but if they are delete them)
* HKEY_CURRENT_USER\Software\U.S. Robotics\Palm Quick Install
* HKEY_CURRENT_USER\Software\U.S. Robotics\PalmOne File Transfer
* HKEY_CURRENT_USER\Software\U.S. Robotics\Pilot Desktop
* HKEY_CURRENT_USER\Software\Palm
* HKEY_CURRENT_USER\Software\Palm, Inc.
* HKEY_CURRENT_USER\Software\PalmDesktopAutorun
* HKEY_CURRENT_USER\Software\palmOne
* HKEY_CURRENT_USER\Software\PalmSource
* HKEY_LOCAL_MACHINE\Software\PalmSource or anything else that says palm
Next reboot your computer.
Then reinstall your palm desktop from the CD and do a hotsync.
For reference purposes, click on the following link for the support page for your Tungsten C device on the kb.palm.com webpage.
http://kb.palm.com/SRVS/NUA/launchTab.asp?t=home&fn=tungsten&mn=c&cn=unlocked
There are links on the page to the user guide, troubleshooting, how to's, downloads, etc.
Post relates to: Palm i705

Transparent Tunneling and Local Lan Access via VPN Client

Remote users using Cisco VPN 4.2 connect successfully to a Cisco Pix 515 (ver. 6.3). The client is configured to allow Transparent Tunneling and Local Lan access, but once connected to the Pix, these two options are disabled. What configuration changes are required on the Pix to enable these options? Any assistance will be greatly appreciated.
Mike Bowyer

Hi Mike,
"Transparent Tunneling" and "Local Lan Access" are two different things. "Transparent Tunneling" is dealing with establishing an IPSec Tunnel even if a NAT device is between your client and the VPN-Headend-Device. "Local LAN Access" is dealing with access to devices in the LAN your VPN-Client-Device is connected to.
What do you mean exactly with "disabled once the connection is made" ?
You can check the local LAN Access by having a look at the Route-Table of the VPN-Client:
Right Click the yellow VPN-lock Icon in System-Tray while the VPN-Connection is active and select "Statistics ...". Have a look at the second register page "route details".
Are any local LAN routes displayed when your are connected ?
And - always remember two important restrictions the Online Help of the VPN-Client is mentioning:
1: This feature works only on one NIC card, the same NIC card as the tunnel.
2: While connected, you cannot print or browse the local LAN by name; when disconnected, you can print and browse by name.
Carsten
PS: Removing Split Tunnel won't enable local LAN access as all traffic would be sent into the IPSec tunnel.

I have to send messages through UDP multicast and unicast from same port. In Labview I tried that it throws error. I heard it is possible by means of Datagram (UDP unicast and multicast) Port Sharing. How can it be achieved in Labview?

I have to send UDP multicast and Unicast messages to a remote port from a single source/local port. I tried by opening UDP unicast and multicast in the same port and got the expected error. I tried by opening a unicast connection and sending unicast messages.After that when multicast messages has to send I closed unicast and opened multicast in the same port.This is not throwing any error. But my requirenment is to comminicate with another application in C ++ which recieves this data, throwing an error of lost connectivity and both the applications are not abled to communicate properly.
In the other application with C++ this is implemented using port sharing. So how port sharing can be implemented in labview so that I can send both multicast and unicast messages from the same port?
Thanks in advance

UDP is a sessionless protocol, meaning that anyone listening on the specified port CAN receive the data. CAN because as you noted there is no guarantee in the protocol that it will be received. And if you send the data not to a specific address but a multicast address not only one computer can receive it but in fact every computer on the same subnet listening to that multicast address and depending on the TTL of the packet also computers in neighbouring subnets, although that last one is not a very reliable operation since routers can be configured to drop multicast packages anyhow despite of a different TTL saying otherwise.
Accordingly there is no real way to make sure that a receiving UDP port is not already in use, since you don't build up a connection. UDP is more or less analogous to shouting your messages through a megaphone, and anyone listening on the right frequency (port) can hear it. You do bind the sender socket to a specific port number but that makes little difference.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

SAPLPD vers.6.22 and Local port printers problem

Similar Messages

Maybe you are looking for