SAPRouter problem ERROR: sapserv2a: route permission denied

Hello Gurus,
we have a problem with connection with SAPOSS, when we test the connection present the following message:
Connection Error
Error when opening an RFC connection
ERROR: sapserv2a: route permission denied (200.30.70.220 to oss001, sapmsOSS)
LOCATION: SAProuter 37.15 on sapserv2a
COMPONENT: NI (network interface)
COUNTER: 5
MODULE:
LINE:
RETURN CODE: -93
SUBRC: 0
RELEASE: 640
TIME: Fri Apr 11 23:54:16 2008
VERSION: 37
In the Tx OSS1 we have:
saprouter1
name: server name where saprouter is installed
IP address: LAN IP address where saprouter is installed (is locally intalled)
Instance no. 99
Saprouter at SAP
Name sapserv2
IP Address 194.39.131.34 (ping to this IP response)
instance 99
name oss001
db name o01
instance 01
In Tx ST11, dev_lg log file contains:
RSTR0006: Display Developer Traces
trc file: "dev_lg", trc level: 1, release: "700"
[Thr 4780] Fri Apr 11 16:41:16 2008
[Thr 4780] *** ERROR => NiBufIProcMsg: hdl 0 received rc=-93 (NIEROUT_INTERN) from peer [nibuf.cpp    2125]
[Thr 4780] *** ERROR => MsINiWrite: NiBufSend (rc=NIEROUT_INTERN) [msxxi.c      2480]
[Thr 4780] *** ERROR => MsIAttachEx: MsINiWrite (rc=NIEROUT_INTERN) [msxxi.c      734]
[Thr 4780] *** ERROR => LgIAttach: MsAttach (rc=NIEROUT_INTERN) [lgxx.c       3980]
[Thr 4780] *** ERROR => LgApplSrvInfo: LgIAttach(rc=LGEMSLAYER) [lgxx.c       1272]
[Thr 4780]
[Thr 4780] * LOCATION    SAProuter 37.15 on sapserv2a
[Thr 4780] * ERROR       sapserv2a: route permission denied (200.30.70.220 to oss001,
             sapmsO01)
[Thr 4780] *
TIME        Fri Apr 11 23:32:17 2008
[Thr 4780] * RELEASE     640
[Thr 4780] * COMPONENT   NI (network interface)
[Thr 4780] * VERSION     37
[Thr 4780] * RC          -93
[Thr 4780] * COUNTER     3
[Thr 4780] *
[Thr 4780] *****************************************************************************
dev_rout file in /usr/sap/saprouter contains:
trc file: "dev_rout", trc level: 1, release: "700"
Fri Apr 11 17:02:21 2008
SAP Network Interface Router, Version 38.10
command line arg 0:     saprouter
command line arg 1:     -r
command line arg 2:     -R
command line arg 3:     ./saprouttab
main: pid = 5504, ppid = 0, port = 3299, parent port = 0 (0 = parent is not a saprouter)
reading routtab: './saprouttab'
Fri Apr 11 17:02:36 2008
ERROR => NiBufIProcMsg: hdl 2 received rc=-94 (NIEROUT_PERM_DENIED) from peer [nibuf.cpp    2125]
Fri Apr 11 17:03:15 2008
ERROR => NiBufIProcMsg: hdl 2 received rc=-94 (NIEROUT_PERM_DENIED) from peer [nibuf.cpp    2125]
Thanks,
HEPC

Hello Kaushik,
the problem was solved adding the following line in the saprouttab file, this line must be the firts line in the file:
KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 194.39.131.34 *
the file continue with:
inbound connections MUST use SNC
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" <IP server 1> 3299
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" <IP server 2> 3299
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" <IP server 1> 3200
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" <IP server 2> 3200
outbound connections to <sapserv2> will use SNC
KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" <IP server with saprouter> 3299
KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 194.39.131.34 3299
permission entries to check if connection is allowed at all
P <IP server 1> 194.39.131.34 *
P <IP server 2> 194.39.131.34 *
I hope this solve your problem,
Hernando Polania
Colombia

Similar Messages

SAPRouter - sapserv2a: route permission denied

Hi Gurus,
I have configured and registered SAProuter.
Version: SAP Network Interface Router, Version 38.10
When try to Log On to SAPNet with 1_Public , I get following error
*sapserv2a: route permission denied
Routtab entired:
SNC connection to and from SAP
KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 194.39.131.34 *
SNC connection to local system for R/3-Support
R/3 Server: 192.168.2.4
R/3 Instance: 00
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.168.2.4 3200
SNC connection to local WINDOWS system for WTS, if applicable
Windows server: 192.168.2.35
Default WTS port: 3389
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.168.2.35 3389
Access from the local Network to SAP
P 192.168.. 194.39.131.34 3299
Deny all other connections
D * * *
SOLMAN: SP17
WIN32
I did not find any latest version of SAPRouter for WIN32. Please suggest ..
Regards
Shreeshail Ganiger

Hi,
> *sapserv2a: route permission denied
>
Why it is picking sapserv2a ? It should be sapserv2. Please check.
Thanks
Sunny

SAPROUTER - route permission denied

Hello.
I'm trying to connect my ERP to SAPNet but i'm getting troubles.
This is the error.
[Thr 4812] * LOCATION    SapRouter on sapserv2a
[Thr 4812] * ERROR       sapserv2a: route permission denied (80.37.122.205 to oss001,
             sapmsO01)
[Thr 4812] *
TIME        Mon Jun 25 10:24:43 2007
[Thr 4812] * RELEASE     620
[Thr 4812] * COMPONENT   NI (network interface)
[Thr 4812] * VERSION     36
[Thr 4812] * RC          -93
[Thr 4812] * COUNTER     19
[Thr 4812] *
[Thr 4812] *****************************************************************************
I have the 3299 port open for the saprouter host.
My saprouter is registered in SAP, i have my certificated and i applied correctly on my saprouter.
My routerttab permits all traffic. P * * * *
I'm configuring my connection on the SM59 transaction.
Target system: OSS
Msg. Server: /H/194.39.131.34/H/OSS001
Language: EN
Client: 001
User: My SSO number
PWD: My sso password.
Any idea?
Thanks in advance.

Hi,
As of April 3rd, 2006 the SAPNet R/3 Frontend will be not available for
Support applications anylonger. It will be substituted by both supports Platforms,
SAP Support Portal and SAP Solution Manager
So OSS1 -->Logon to SapNet (Does not work).
You can maintain the IP's and Other Information in OSS1 -->Paramter ->Technical Settings. which will modify the "SAPOSS" RFC destination.
Thanks,
Tanuj

Saprouter "sapserv3: route permission denied"

Hi!
I have one question regarding the SAP router functionality.
If I check the connection via Tx. OSS1 I can choose the different groups (EWA, 1_PUBLIC, etc.) but after this I am getting the error "sapserv3: route permission denied (212.6.91.12 to 10.16.1.19, sapdp01").
How can I solve the problem?
My SAPROUTTAB looks like "P * * *" (it means alls connections are allowed)

Hi Axel,
The direct connection via OSS1 is not possible anymore. SAP has deactivated this since April-2006.
You should make the configuration in OSS1 (I think that is okay for your case as you are getting the different group selection as pop-up).
Only RFC connection logon is allowed. For more info please check note: 33135
http://service.sap.com/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=33135&_NLANG=E
Cheers !!
Satya.
PS: Pls reward points if the answer is helpful...Thx.

Sapserv1:route permission denied (216.53.212.149 to 147.204.100.55, sapdp01

Hi,
We are having issue with our sapnet connection. When ever I am trying to connect to sapNet im getting this error. The following is the procedure i m doing
1. t-code oss1
2. logon to SAPNet
3. selecting the group PUBLIC
then I m getting thid error
sapserv1:route permission denied (216.53.212.149 to 147.204.100.55, sapdp01)
Please reply me back ASAP as this is urgent issue. I will appriciate ur help n sugsestions.

Hi,
On April 03, 2006, SAPNet - R/3 Frontend was deactivated as a user interface. SAPNet - R/3 Frontend, which was introduced in 1995 as SAP's Online Service System (OSS), was SAP's first and, for a long time, its only support system, which customers worldwide accessed using transaction OSS1.
Today, the SAProuter connection via transaction OSS1 continues to be used for the following RFC connections:
- Transfer of EarlyWatch Alert data
- Exchange of data using the SAP Notes Assistant
To install and configure this transaction, proceed exactly as follows:
1. Making the technical settings for OSS1
You must configure transaction OSS1 before you can use it. Choose "Parameter" from the menu bar (-> Techn. Settings) and choose "Change".
The technical settings for transaction OSS1 are set by default to Walldorf (sapserv3) with the IP address 147.204.2.5. If this address does not correspond with the entry in your host file, choose the sapserv3 IP address that is valid for you by choosing the menu option "SAPRouter at SAP -> Walldorf".
Furthermore, enter your local SAPRouter information in the "SAPRouter 1" fields. Now save the settings.
NOTE:
Replace sapservX with the following values:
sapserv1 (194.117.106.129) connection via Internet VPN
sapserv2 (194.39.131.34) connection via Internet SNC
sapserv3 (147.204.2.5)    for customers with connection to Germany
sapserv4 (204.79.199.2)    for customers in America
sapserv5 (194.39.138.2)    for customers with connection to Japan
sapserv6 (194.39.139.16) for customers in Australia and New Zealand
sapserv7 (194.39.134.35)   for customers in Asia
Choose "Start Logon to SAPNet - R/3 Frontend". If the system issues message S1 452, there are errors in the operating system configuration.
When you install an access authorization file "saprouttab", you should ensure that all of your front ends and R/3 servers can establish a connection to sapserv3, service sapdp99.
Try it again until the dialog box "Please select a group" appears. If the dialog box "Please select a group" is displayed, the configuration for transaction OSS1 is correct.
I hope this will help you.
Regards
Aashish Sinha
PS : reward points if helpful

SAP ROUTE PERMISSION DENIED

Hi Experts,
When i try to logon SAPNET from T/Code OSS1 its througing error as
"sapsrv2a: route permission denied(12.34.23.5 to oss1 sapdp01)
Location SAPoruter 37.15 on sapserv2a
Component NI
Release 640
Version 37
Return Code -93
Counter 5
Kindly suggest any solution for this problem
Thanks in Advance,
Ramamurthy

HI
I have this error too if I try to logon to sapnet with OSS1 transaction.
you must logon to sapnet trought internet explorer http://service.sap.com
Note 33135 - Guidelines for OSS1
Note Language: Version: 15 Validity: valid since 30.06.2006
PDF Download Corrections Compare Versions SSCR
 Go to SAP Note: Display
Content: Summary | Header Data | Releases | Related Notes
Summary
Symptom
You are using transaction OSS1 to establish a remote connection.
Other terms
OSS1, RFC connections to SAPNet - R/3 Frontend, SAPOSS, OSS_RFC, SAProuter
Reason and Prerequisites
Remote connection to SAP, R/3 system
Solution
On April 03, 2006, SAPNet - R/3 Frontend was deactivated as a user interface. SAPNet - R/3 Frontend, which was introduced in 1995 as SAP's Online Service System (OSS), was SAP's first and, for a long time, its only support system, which customers worldwide accessed using transaction OSS1.
Today, the SAProuter connection via transaction OSS1 continues to be used for the following RFC connections:
- Transfer of EarlyWatch Alert data
- Exchange of data using the SAP Notes Assistant
To install and configure this transaction, proceed exactly as follows:
1. Making the technical settings for OSS1
You must configure transaction OSS1 before you can use it. Choose "Parameter" from the menu bar (-> Techn. Settings) and choose "Change".
The technical settings for transaction OSS1 are set by default to Walldorf (sapserv3) with the IP address 147.204.2.5. If this address does not correspond with the entry in your host file, choose the sapserv3 IP address that is valid for you by choosing the menu option "SAPRouter at SAP -> Walldorf".
Furthermore, enter your local SAPRouter information in the "SAPRouter 1" fields. Now save the settings.
After making these changes, the screen for the technical settings should be as follows:
Router data for the logon to SAPNet - R/3 Frontend
-Customer SAPRouters----
-SAPRouter 1---- -SAPRouter 2----
Name my_saprouter
Name
IP Address x.x.x.x
IP Address
Instanc No. 99
Instance No.
-SAPRouter and OSS Message Server at SAP----
-SAPRouter at SAP---- -OSS Message Server----
Name sapservX
Name oss001
IP Address x.x.x.x
DB Name O01
Instance No. 99
Instance No. 01
NOTE:
Replace sapservX with the following values:
sapserv1 (194.117.106.129) connection via Internet VPN
sapserv2 (194.39.131.34) connection via Internet SNC
sapserv3 (147.204.2.5) for customers with connection to Germany
sapserv4 (204.79.199.2) for customers in America
sapserv5 (194.39.138.2) for customers with connection to Japan
sapserv6 (194.39.139.16) for customers in Australia and New Zealand
sapserv7 (194.39.134.35) for customers in Asia
Choose "Start Logon to SAPNet - R/3 Frontend". If the system issues message S1 452, there are errors in the operating system configuration. In this case, see appendix A.
When you install an access authorization file "saprouttab", you should ensure that all of your front ends and R/3 servers can establish a connection to sapserv3, service sapdp99. Appendix E contains examples of saprouttabs. For more information on the SAPRouter, refer to the SAPRouter documentation (Note 30289).
Try it again until the dialog box "Please select a group" appears. If the dialog box "Please select a group" is displayed, the configuration for transaction OSS1 is correct. You can then proceed with the next section.
NOTE:
When you try to log on to SAPNet - R/3 Frontend, the system issues an error message indicating that you are no longer allowed to log on to SAPNet - R/3 Frontend.
2. Further questions?
As soon as you have carried out the steps described above, transaction OSS1 should connect you to the most efficient SAPNet - R/3 Frontend application server.
If you have further questions or problems, the file entitled "OSS1. TroubleShooting" contains additional information. If you have a problem that you cannot solve, contact our hotline: 0180/5 34 34 3-3.
Appendix A
If message S1 452 appears when you try to log on to SAPNet - R/3
Frontend with transaction OSS1, there is an incorrect setting somewhere (either in the technical settings for OSS1 or at operating system level).
To find out why the connection to the message server was unsuccessful, choose Tools (Case, Test ( Developer trace (transaction ST11). The trace contains an entry for dev_lg. This file contains the error log. The LOCATION line, if available, contains the host on which the error occurred. The problem description is found in the ERROR line. If you cannot find the entry dev_lg, check whether the program "lgtst" exists (see appendix B).
Examples of the contents of dev_lg:
ERROR partner not reached (host abc.def.gh.i, service sapdp99)
TIME Thu Aug 10 09:17:57 1995
RELEASE 21J
COMPONENT NI (network interface)
VERSION 15
RC -10
MODULE niuxi.c
LINE 773
DETAIL NiPConnect
SYSTEM CALL connect
ERRNO 239
ERRNO TEXT Connection refused
COUNTER 1
Here, the system could not reach the SAPRouter. For example, no SAProuter could be found under service 99 (port 3299) on the host with the IP address abc.def.gh.i. The SAPRouter process does not work or the IP address was not configured correctly in OSS1.
ERROR service 'sapdp99' unknown
TIME Thu Aug 10 09:22:00 1995
RELEASE 30A
COMPONENT NI (network interface)
VERSION 17
RC -3
MODULE niuxi.c
LINE 404
DETAIL NiPServToNo
SYSTEM CALL getservbyname
COUNTER 1
This message indicates that the service sapdp99 was not entered in /etc/services. Add the entry in /etc/services. This must be available on all R/3 servers and front ends.
LOCATION SapRouter on abc.def.gh.i
ERROR route permission denied (XXXXXXXX to sapservX, sapdp99)
TIME Thu Aug 10 09:37:44 1995
RELEASE 30A
COMPONENT NI (network interface)
VERSION 17
RC -94
MODULE nixxrout.c
LINE 1426
COUNTER 1
The file saprouttab, which contains the valid connections, is not correct. The SAPRouter on the host abc.def.gh.i does not set up the connection to sapservX. Check the SAPRouter file saprouttab. This should contain every R/3 server and frontend (see also appendix E).
LOCATION SapRouter on abc.def.gh.i
ERROR internal error
TIME Thu Aug 10 10:50:18 1995
RELEASE 21J
COMPONENT NI (network interface)
VERSION 15
RC -93
MODULE niuxi.c
LINE 773
DETAIL NiPConnect
SYSTEM CALL connect
ERRNO 242
ERRNO TEXT No route to host
COUNTER 1
This error message indicates that the host abc.def.gh.i cannot process the IP address of the next host configured in OSS1. If the SAPRouter error message appears and the next host is sapservX, check the address for sapservX. OSS1 is delivered with the default settings sapserv3 and IP address 147.204.2.5. Customers in the U.S.A. are normally connected to sapserv4, IP address 204.79.199.2. If required, change the technical settings of OSS1 accordingly.
ERROR internal error
TIME Thu Nov 23 00:11:20 1995
RELEASE 21J
COMPONENT NI (network interface)
VERSION 15
RC -1
COUNTER 1
This message shows that the instance number entered does not agree with at least one of the technical settings for the SAPRouter defined in OSS1. The default for the instance number of the SAPRouter is 99. Under no circumstances should you enter the instance number of your R/3 system for the SAPRouter. You need to specify instance number 99 for sapservX. Otherwise, it is not possible to log on to SAPNet - R/3 Frontend.
LOCATION SapRouter on sapservX
ERROR route permission denied (XXXXXX to oss002, sapmsO01)
TIME Mon Nov 27 19:25:54 1995
RELEASE 30A
COMPONENT NI (network interface)
VERSION 15
RC -94
MODULE nixxrout.c
LINE 1390
COUNTER 1
An incorrect server was entered as message server 001, in this example, the server oss002. The message server for O01 is oss001. Change the technical settings for transaction OSS1 accordingly.
Appendix B (for Windows NT only)
Change to the directory "\usr\sap\<SID>\SYS\exe\run" and search for the program "lgtst.exe". If you cannot find it, or if the length of this file is not exactly 640216 bytes, import the program "lgtst.exe" from sapservX via ftp:
> ftp sapservX
Connected to sapservX.
220 sapservX FTP server (Version 1.7.194.2 Wed Sep 8 17:23:04 GMT 1993) ready.
Name: ftp
331 Guest login ok, send ident as password.
Password: <Your_customer_number>
ftp> cd dist/permanent/OSS1/lgtst.exe
250 CWD command successful.
ftp> binary
200 Type set to I.
ftp> get lgtst.exe
150 Opening BINARY mode data connection for lgtst.exe (640216 bytes).
226 Transfer complete.
640216 bytes received.
ftp> bye
Copy this file into the aforementioned directory.
Appendix C
The messages from transaction OSS1 (error messages and information) are given in the following list. Each message is described briefly.
|No.| Message Text
|450| Maintain technical settings first.
|452| Unable to connect to SAPNet - R/3 Frontend message server.
|454| E: Unable to start SAPGUI.
|455| SAPGUI was started.
|456| Specify a server name.
|457| Specify an IP address.
|458| Specify an instance number.
|459| Specify a database name.
|460| No authorization to log on to SAPNet - R/3 Frontend.
|461| No authorization to maintain technical settings.
|462| E: RFC destination could not be generated
Number 450: Maintain technical settings first
You can only log on to SAPNet - R/3 Frontend if the technical settings
are maintained. The technical settings determine the network path from the customer R/3 system to the online service system.
Number 452: Unable to connect to SAPNet - R/3 Frontend message server.
This message appears if the connection to the SAPNet - R/3 Frontend message server was not possible (system name O01, server oss001). There can be different reasons for this (see appendix A).
Number 454: E: Unable to start SAPGUI.
Transaction OSS1 could start the SAPGUI (not SAPTEMU), either because the program does not exist in the path given, or because the execute permission is not set correctly. Check whether the SAPGUI exists; SAPTEMU alone is not sufficient.
Number 455: SAPGUI was started.
This is not an error message. It merely informs you that an additional SAPGUI was started to establish a connection to SAPNet - R/3 Frontend.
Number 456: Specify a server name.
The server name was omitted from the technical settings.
Number 457: Specify an IP address.
The IP address was omitted from the technical settings.
Number 458: Specify an instance number.
The instance number was omitted from the technical settings.
Number 459: Specify a database name.
The database name for the Online Service System (001) was omitted from the technical settings.
Number 460: No authorization to log on to Online Service System
You do not have authorization to call transaction OSS1. Up to Release 2.2F: The authorization S_TSKH_ADM is checked for value 1. After Release 2.2F: For transaction OSS1, there are two special authorization profiles (see appendix D).
Number 461: No authorization to maintain technical settings.
You do not have the authorization to maintain the technical settings (see appendix D).
Number 462: E: RFC destination could not be generated.
In Releases 2.2, you can ignore this message. When saving the technical settings, an attempt is made to generate the RFC destination SAPOSS. The length of an RFC destination is limited in 2.2, and the maximum length was exceeded by the parameters of the technical settings.
Appendix D
As of Release 2.2F, there are two different authorization profiles for transaction OSS1: S_OSS1_START and S_OSS1_ADMIN.
S_OSS1_START authorizes you to call transaction OSS1 and to log on to the Online Service System. In addition, S_OSS1_ADMIN contains the
authorization to maintain the technical settings for the transaction.
The technical settings of OSS1 must be made at least once. Therefore, add S_OSS1_ADMIN to your user profile, log off, and then log on again afterwards.
Appendix E
Prerequisites:
(A TCP/IP connection can be established between the SAProuter on
the customer system and the SAProuter on sapserv3 in Walldorf.
(The SAProuter process must be started on the server that is registered
with SAP:
saprouter -r -R saprouttab &
Example of the "saprouttab" file with minimum configuration:
saprouttab - Example
Allows connections from the entire customer network to sapservX
and therefore to the Online Service System via SAProuter port 3299.
P * sapservX sapdp99 *
Allows connections from sapserv3 to the entire customer network,
for example for EarlyWatch or First Level Support.
P sapservX * * *
Header Data
Release Status: Released for Customer
Released on: 30.06.2006 09:13:57
Priority: Correction with high priority
Category: Consulting
Primary Component: XX-SER-NET Network connection
Antonio.
Edited by: Antonio Voce on May 22, 2008 5:07 PM

Route permission denied

Hello everbody;
When I want to entry to the server sap, I have this error route permission denied (181.66.156.130 to n4sexternal,sapdp01)
Someone can help me please

Hi, Robert!
You'll have to config your SapRouter appropriately. It's usually done by Basis team.

Saprouttab, route permission denied

hi,
I have to open one ITS (internet transaction server) link to SAP thru saprouttab. I have done the entry in saprouttab. But when SAP is trying to connect, he is getting error "SAP WEB PROXY: destination server not reachable"
detail error : route permission denied.
I have a ITS link <hostname.mycompany.com> and the port is 80. In saprouttab table, permission is given and entry is
P 204.79.199.2 <hostname.mycompany.com> 80
P 147.204.2.5 <<hostname.mycompany.com> 5631
My Question:
What is the correct port for ITS link ? Since my ITS link is having default port 80, I have given 80 in saprouttab. But still it is giving error route permission denied. SAP has send me the error screen snapshot and in that destination port it is showing 3299.
Can any one help me what should be the correct entry in saprouttab and the correct port number ?? Is there any way I can check the permission before asking SAP to check ?
Thanks
Regards,
Basis

hi basis ck,
3299, is the SAP Gateway Service port. So check whether this service is mentioned in "service" file or not. If not then make an entry there.
Normally, if u have a SAPGUI installed in ur machine, then the entry will be automatic.
I think then connection should be ok or else then try with 3299 in place of 80 in ur saprouttab entry.
with regards,
Samarpan

"Error on Page" permission denied

We have several users in our SRM system that encounter an "Error on Page" (permission denied) javascript error when their page is left idle for 5-10 minutes. This is in spite of the timeout settings being set as follows:
SRM Server
rdisp/gui_auto_logout 1800
AGATE
~rfctimeout 60
~timeout 60
TimeoutDiagRead 600000
WGATE
NiSendTimeout 600000
NiReceiveTimeout 600000
We are running SRM 4.0 (Server 5.0), with an external ITS release 620. The WGate and AGate are on separate servers, and we do experience the same error in all of our systems. Once the Error On Page has been received, none of the links on the current page are functional. OSS has not been able to duplicate.
I would appreciate any suggestions. Thanks.

Hi,
1) Is it BSP application issue.
Javascript error could occur if any of the Script files were not loaded.
IF you have tool like HTTPWatch , You can use then and see which File on loading home page has an issue. As absolute URL will also be loaded we can check which BSP application javascript fiel is issue, then check in SICF if that BSP application is active.
2)You would also try to debug using javascript and see where error is happening,
if possible just give more inputs.
Regards,
Vijay

Error MOS-01105: Permission Denied message during install

Hi,
I am trying to install BW30B with Oracle 9.2 on a Sun Solaris 64bit machine. I am using Exceed to display the installation GUI.
I keep getting the error message:
Unable to access file <Path>/SAPENV.SH Permission Denied.
I am running the install with root permissions. The above path does exist and I have given all the files 777 rights. I have in turn given the <SID>adm and ora<SID> directories 777 access. It looks like its trying to copy the scripts from the /UNIX/COMMON/INSTALL directory into the <SID>adm & ora<SID> directories when it fails.
Any suggestions would be greatly appreciated.
Regards,
Chengappa

By Default none of us have root permissions. To work around this we start the installation as sapadm and add the install path to the sudo list so that the install runs with root permissions.
Eg: sapadm> sudo /sapcd/BWINSTALL/INSTALL
The destination filesystem is remotely mounted, though i think that's not the problem as we have successfully installed SAP from that path before. The error message from the sapinst log file is below. Also the userid's have already been created and I have set their home directories to 777 permissions.
Transaction begin ********************************************************
TRACE [iaxxbnodes.cpp:404]
 CIaOsNodes::nodesDo()
Processing Nodemap CONDITION=YES NODENAME=/sapcd/sap/BW30B_ORACLE9_INSTALL/kernel/UNIX/COMMON/INSTALL/SAPENV.SH NODEPERMISSION=(da1adm,USER,=rwo) (sapsys,GROUP,=rg) (Everyone,GROUP,=r) NODETARGET=/export/home/da1adm/.sapenv_sapda31.sh NODETYPE=FILE OPMODE=COPY
TRACE[E] [syuxcnodut.cpp:591]
 CSyNodeUtils::isExistingWithType(iastring, bool, ISyNode::eNodeType)
Unable to access file /sapcd/sap/BW30B_ORACLE9_INSTALL/kernel/UNIX/COMMON/INSTALL/SAPENV.SH: Permission denied.
ERROR 2005-06-06 16:42:18 [iaxxbnodes.cpp:444]
 CIaOsNodes::nodesDo()
MOS-01105 Processing of one or more file system node operations of table
Content of table: tUX_SAPComponent_Environment_FORMS_SHARED with condition WHERE WapsSystemName='DA1' AND WapsInstanceName='DVEBMGS70' AND WapsInstanceHost='sapda31' AND SUBSTR(Key,1,5) = 'WAPS_'
Row[0] WapsSystemName="DA1" WapsInstanceName="DVEBMGS70" WapsInstanceHost="sapda31" Key="WAPS_SAPENV_SH_COPYING" Condition="true" NodeName="/sapcd/sap/BW30B_ORACLE9_INSTALL/kernel/UNIX/COMMON/INSTALL/SAPENV.SH" NodeNameWithoutCdPath="UNIX/COMMON/INSTALL/SAPENV.SH" CdName="SAPINST" NodePermission="(da1adm,USER,=rwo) (sapsys,GROUP,=rg) (Everyone,GROUP,=r)" NodeTarget="/export/home/da1adm/.sapenv_sapda31.sh" NodeType="FILE" OpMode="COPY"
Row[1] WapsSystemName="DA1" WapsInstanceName="DVEBMGS70" WapsInstanceHost="sapda31" Key="WAPS_SAPENV_CSH_COPYING" Condition="true" NodeName="/sapcd/sap/BW30B_ORACLE9_INSTALL/kernel/UNIX/COMMON/INSTALL/SAPENV.CSH" NodeNameWithoutCdPath="UNIX/COMMON/INSTALL/SAPENV.CSH" CdName="SAPINST" NodePermission="(da1adm,USER,=rwo) (sapsys,GROUP,=rg) (Everyone,GROUP,=r)" NodeTarget="/export/home/da1adm/.sapenv_sapda31.csh" NodeType="FILE" OpMode="COPY"
Row[2] WapsSystemName="DA1" WapsInstanceName="DVEBMGS70" WapsInstanceHost="sapda31" Key="WAPS_SAPSRC_SH_COPYING" Condition="true" NodeName="/sapcd/sap/BW30B_ORACLE9_INSTALL/kernel/UNIX/COMMON/INSTALL/SAPSRC.SH" NodeNameWithoutCdPath="UNIX/COMMON/INSTALL/SAPSRC.SH" CdName="SAPINST" NodePermission="(da1adm,USER,=rwo) (sapsys,GROUP,=rg) (Everyone,GROUP,=r)" NodeTarget="/export/home/da1adm/.sapsrc_sapda31.sh" NodeType="FILE" OpMode="COPY"
Row[3] WapsSystemName="DA1" WapsInstanceName="DVEBMGS70" WapsInstanceHost="sapda31" Key="WAPS_SAPSRC_CSH_COPYING" Condition="true" NodeName="/sapcd/sap/BW30B_ORACLE9_INSTALL/kernel/UNIX/COMMON/INSTALL/SAPSRC.CSH" NodeNameWithoutCdPath="UNIX/COMMON/INSTALL/SAPSRC.CSH" CdName="SAPINST" NodePermission="(da1adm,USER,=rwo) (sapsys,GROUP,=rg) (Everyone,GROUP,=r)" NodeTarget="/export/home/da1adm/.sapsrc_sapda31.csh" NodeType="FILE" OpMode="COPY"
Row[4] WapsSystemName="DA1" WapsInstanceName="DVEBMGS70" WapsInstanceHost="sapda31" Key="WAPS_DBSRC_SH_COPYING" Condition="true" NodeName="/sapcd/sap/BW30B_ORACLE9_INSTALL/kernel/UNIX/COMMON/INSTALL/DBSRC.SH" NodeNameWithoutCdPath="UNIX/COMMON/INSTALL/DBSRC.SH" CdName="SAPINST" NodePermission="(da1adm,USER,=rwo) (sapsys,GROUP,=rg) (Everyone,GROUP,=r)" NodeTarget="/export/home/da1adm/.dbsrc_sapda31.sh" NodeType="FILE" OpMode="COPY"
Row[5] WapsSystemName="DA1" WapsInstanceName="DVEBMGS70" WapsInstanceHost="sapda31" Key="WAPS_DBSRC_CSH_COPYING" Condition="true" NodeName="/sapcd/sap/BW30B_ORACLE9_INSTALL/kernel/UNIX/COMMON/INSTALL/DBSRC.CSH" NodeNameWithoutCdPath="UNIX/COMMON/INSTALL/DBSRC.CSH" CdName="SAPINST" NodePermission="(da1adm,USER,=rwo) (sapsys,GROUP,=rg) (Everyone,GROUP,=r)" NodeTarget="/export/home/da1adm/.dbsrc_sapda31.csh" NodeType="FILE" OpMode="COPY"
failed.
Transaction end **********************************************************

Backup error on DEV (Permission denied)

Dear all,
Pls check the backup log...
10:49:03     Job started
10:49:03     Step 001 started (program RSDBAJOB, variant &0000000000222, user ID S2K_SATHIES)
10:49:04     Execute logical command BRBACKUP On host SAPDEVQA
10:49:04     Parameters:-u / -jid ALLOG20100823104903 -c force -t online -m all -p initIRD.sap -a -c force -p initIRD.sap -c
10:49:04     ds
10:49:04     BR0051I BRBACKUP 7.00 (48)
10:49:04     BR0055I Start of database backup: bedypdqe.ant 2010-08-23 10.49.04
10:49:04     BR0252E Function fopen() failed for '/oracle/IRD/sapbackup/bedypdqe.ant' at location main-9
10:49:04     BR0253E errno 13: Permission denied
10:49:04     BR0121E Processing of log file /oracle/IRD/sapbackup/bedypdqe.ant failed
10:49:04
10:49:04     BR0056I End of database backup: bedypdqe.ant 2010-08-23 10.49.04
10:49:04     BR0280I BRBACKUP time stamp: 2010-08-23 10.49.04
10:49:04     BR0054I BRBACKUP terminated with errors
10:49:04     External program terminated with exit code 3
10:49:04     BRBACKUP returned error status E
10:49:04     Job finished
Kindly advise
Regards

issu has been resolved , after given permission 777 to sapbackup(directory)

"Error opening document - permission denied"

I'm using Acrobat Reader version 7.0. It refused to open pdf files on my computer. The error message that was returned is There was an error opening this document. Permission denied. I own the files, with read (and write) permissions, and acroread is running with my user id.
I have tried deleting and re-installing the program, with no luck.
Any ideas, please?

I'm using Acrobat Reader version 7.0.
Install the updates for Adobe Reader 7.

JCO Connection - route permission denied

Coulds any one suggest on this error
Connect to SAP gateway failed Connect_PM
Rout permission denied

Hello Mario,
it seems that the SAP Router which is used with hte connection String does not allow you to connect. Have you tried the Connection string to logon with SAP GUI?
Regards
Gregor

Permission denied in sap router

Hello everybody,
I have installed the SAPROUTER.
when our remote user login by SAPSTRING 114.240.174.28 then user can login without any problem
but when the user used the /H/114.240.174.28/H/192.168.0.170/S/3299/H/
then they can not able to login, get error
router permission denied 115.240.50.30 to 192.168.0.170, 3299
I have check the saposs RFC from sap its work fine.
In my SAP routtab file I maintain the entries as follows
KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 194.39.131.34 *
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.168.0.180 3200
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.168.0.185 3200
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.168.0.186 3200
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.168.0.180 *
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.168.0.185 *
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.168.0.186 *
P * 194.39.131.34 3299
P * * *
Please suggest where is wrong.
Thanks
Ganesh

HI,
Our remote user can access with the /H/external_IP_of_saprouter/H/internal_IP_of_saprouter/H/ this string
but now they are not able to access by using above said string , when they tired to access they got message
like
router permission denied 115.240.50.30 to 192.168.0.170, 3299
actually, in saprouttab I mention P * * * .
Thanks
Ganesh

Permission denied error while checking in

I am working on webdynpro DC. While i try to checkin the DC, the following permission denied errror pops up. I have seen a blog with similar problem, but no answer. Will someone from SAP help solve this issue?
The related link with similar problem is
Permission denied error while CBS is building DCs
My Log is as follows:
Build number assigned: 7900
Change request state from QUEUED to PROCESSING
ACTIVATION request in Build Space "D30_ESSJAVA_D" at Node ID: 7,433,150
 [id: 7,756; parentID: 0; type: 4]
 [options: IGNORE COMPONENT INTERSECTION]
REQUEST PROCESSING started at 2007-05-22 15:55:22.138 GMT
===== Pre-Processing =====
Waiting 5 ms
List of activities to be activated:
 1 activity in compartment "com.swiss_XSSswiss_1"
 Model_KA_22022007_1735
 [seq. no 1129][created by INDIA at 2007-05-22 17:55:14.0][ID 4db56227087911dcb96f0013217ca473]
Analyse activities... started at 2007-05-22 15:55:22.155 GMT
Analyse dependencies to predecessor activities... finished at 2007-05-22 15:55:23.704 GMT and took 1 s 400 ms
 SKIP : Development Component "com.swiss/xss/glbmr"
 1 component to be build in compartment "com.swiss_XSSswiss_1"
Analyse activities... finished at 2007-05-22 15:55:23.777 GMT and took 1 s 622 ms
Change request state from PROCESSING to PROCESSING
Calculate all combinations of components and variants to be built...
 "com.swiss/xss/glbmr" variant "default"
Prepare build environment in the file system... started at 2007-05-22 15:55:23.876 GMT
 Synchronize development configuration... finished at 2007-05-22 15:55:23.877 GMT and took 0 ms
 Synchronize component definitions... finished at 2007-05-22 15:55:23.892 GMT and took 14 ms
 Synchronize sources...
17:55:36.481 SYNC (FAILED: Failed to create/open file: /usr/sap/trans_D30/CBS/65/.CACHE/437/DCs/com.swiss/xss/glbmr/_comp/src/packages/com/swiss/glbmr/trainmodel/types/Bapiqualif.dtstructure (Permission denied (errno:13))) Bapiqualif.dtstructure (/usr/sap/trans_D30/CBS/65/.CACHE/437/DCs/com.swiss/xss/glbmr/_comp/src/packages/com/swiss/glbmr/trainmodel/types/Bapiqualif.dtstructure)
17:55:36.702 SYNC (FAILED: Failed to create/open file: /usr/sap/trans_D30/CBS/65/.CACHE/437/DCs/com.swiss/xss/glbmr/_comp/src/packages/com/swiss/glbmr/trainmodel/types/Plstx.dtsimpletype.xlf (Permission denied (errno:13))) Plstx.dtsimpletype.xlf (/usr/sap/trans_D30/CBS/65/.CACHE/437/DCs/com.swiss/xss/glbmr/_comp/src/packages/com/swiss/glbmr/trainmodel/types/Plstx.dtsimpletype.xlf)
17:55:36.714 SYNC (FAILED: Failed to create/open file: /usr/sap/trans_D30/CBS/65/.CACHE/437/DCs/com.swiss/xss/glbmr/_comp/src/packages/com/swiss/glbmr/trainmodel/types/Syuname.dtsimpletype (Permission denied (errno:13))) Syuname.dtsimpletype (/usr/sap/trans_D30/CBS/65/.CACHE/437/DCs/com.swiss/xss/glbmr/_comp/src/packages/com/swiss/glbmr/trainmodel/types/Syuname.dtsimpletype)

Hi Sandeep,
looks like your CBS has no permission in the filesystem where it tries to build your DC.
The prefix "/usr/sap/trans_D30/CBS" looks a bit suspicious to me. Is it really intentional that CBS should work in some (probably publicly visible) transport directory?
Regards,
Marc

SAPRouter problem ERROR: sapserv2a: route permission denied

Similar Messages

Maybe you are looking for