SAPRouter set up in Solman 7.1 sr1 release

Dear All,
we completed the installation Of Solman Server 7.1. Now we are in the process of activity "Configuration Of SOlman Server ".
RFC Destination SAP OSS not working. Connection and Authorization test for SAPOSS is failing with "Connection Error "
Connection test of RFC Destination ( SAPOSS) is failing with below error:
Logon Connection Error
Error Details Error when opening an RFC connection (LB: Hostname or service of the message ser
Error Details ERROR: partner '147.204.2.5:sapdp99' not reached
Error Details LOCATION: SAP-Server solmantrg_SMI_01 on host solmantrg (wp 2)
Error Details DETAIL: NiPConnect2: 147.204.2.5:3299
Error Details CALL: connect
Error Details COMPONENT: NI (network interface)
Error Details COUNTER: 27
Error Details ERROR NUMBER: 79
Error Details ERROR TEXT: Connection refused
Error Details MODULE: nixxi.cpp
Error Details LINE: 3286
Error Details RETURN CODE: -10
Error Details SUBRC: 0
Error Details RELEASE: 720
Error Details TIME: Fri Apr 25 13:04:19 2014
Error Details VERSION: 40
Authorization Test Of RFC Destination ( SAPOSS) IS FAILING WITH below error
Logon Connection Error
Error Details Error when opening an RFC connection (LB: Hostname or service of the message ser
Error Details ERROR: partner '147.204.2.5:sapdp99' not reached
Error Details LOCATION: SAP-Server solmantrg_SMI_01 on host solmantrg (wp 2)
Error Details DETAIL: NiPConnect2: 147.204.2.5:3299
Error Details CALL: connect
Error Details COMPONENT: NI (network interface)
Error Details COUNTER: 34
Error Details ERROR NUMBER: 79
Error Details ERROR TEXT: Connection refused
Error Details MODULE: nixxi.cpp
Error Details LINE: 3286
Error Details RETURN CODE: -10
Error Details SUBRC: 0
Error Details RELEASE: 720
Error Details TIME: Fri Apr 25 13:05:37 2014
Error Details VERSION: 40
In OSS1, parameter of the technical setting is attached. Please check attached screenshot for more details on the error
Please tel how to maintain OSS1 details and help to fix the RFC error of destination SAPOSS
Regards,
Gayathri.K

Gayathri,
Is your SAProuter installed on the same server as Solution Manager, or on another server? Since you said this was all working before when you were using SolMan 4.0, you must have already had a saprouter registered with SAP. Do you still have that SolMan 4.0 system? Or did you wipe it out before doing the fresh install of SolMan 7.1?
The SAProuter will have two IP addresses: an 'external' one that you have registered with SAP, and an 'internal' one that is on your company's private network. That internal IP address needs to be set up in OSS1 technical settings as the address of your "SAProuter at Customer Site". In your screenshot, you had these fields blank, and as Shkelzen pointed out, this isn't going to work until you fill that in:
Regards,
Matt

Similar Messages

Solman 4.0 SR1 issue - create ADS user

Has anyone seen a problem with creating the ADS user while installing SOLMAN 4.0 SR1? I appreciate any thoughts you might have. Thank you much.
~TJ
createADSUser was executed with status ERROR .
Previous to that message, I see:
WARNING 2006-11-19 03:09:01
CJSlibModule::writeWarning_impl()
Execution of the command "\usr\sap\SM1\SYS\exe\run\jlaunch
UserCheck.jlaunch com.sap.security.tools.UserCheck
\usr\sap\SAPinst\SOLMAN\SYSTEM\DB4\CENTRAL\AS\install\lib:\usr\sap\SAPinst\SOLMAN\SYSTEM\DB4\CENTRAL\AS\install\sharedlib:\usr\sap\SAPinst\SOLMAN\SYSTEM\DB4\CENTRAL\AS\install
-c sysnr=40 -c ashost=USALSAPT -c client=001 -c user=DDIC -c XXXXXX -a
checkCreate -u ADSUSER -p XXXXXX -message_file UserCheck.message"
finished with return code 255. Output:
Could not open the ICU common library.
The following files must be in the path described by
the environment variable "LIBPATH":
libicuuc30.a, libicudata30.a, libicui18n30.a [nlsui0_mt.c 1620] pid =39728

Hi TJ,
useful input for analysis, also if via customer message might be the environment of the regarding job. In order to get it do the following:
Signon as <SID>ADM
call qp2term
ps -ef | grep <SID>
(gives you an overview of active processes, grep the PID <pid> of your process)
ps eew <pid>
HTH,
Thomas

How to set Ibase in Solman?

Hello friends!
I am trying to configure Ibase systems in solution manager for testing.
I want to create all my Systems(in landscape), so that the test team can assign the testers accordingly to the systems.
When I am trying to include the system in the Ibase, It is looking for Identification?
Any information on this problem will be appreciated.
Thanks in advance.

Dear Fr.
For Initially Creating and Assigning the Component Systems as iBase
Use
To be able to use the Service Desk and Change Request scenarios in SAP Solution Manager, you need to define the Installed Base (iBase). An iBase component has to be created for each satellite system from which Service Desk messages will be sent to the SAP Solution Manager system.
The iBase components for the iBase structure SOL_MAN_DATA_REP (installation 1) can be created and assigned either automatically or manually. Note that these components and the assignments can only be created once automatically for every solution. To refresh your existing iBase data execute IMG activity Manually Create and Assign the Satellite Systems as iBase Components(this is second step given under service desk-ibase path of spro).
Requirements
You have defined your system landscape in the Solution Manager System Landscapes(transaction SMSY).
Steps
1. In transaction SOLUTION_MANAGER, open a solution.
2. Choose Edit -> Initial Data Transfer for iBase.
The data is copied automatically. The iBase systems for the solution are automatically assigned to SOL_MAN_DATA_REP (installation "1"). An iBase component is created for each system installation number (which can be displayed by choosing System -> Status).
For each solution repeat these steps.
In Spro goto solution manager advance config service desk-ibase and read the IMG help provided you can very wel do thesame.
Please reward points for the same.

Setting up of WF - BATCH for invoices released through workflow

Hi all,
i have set up the standard workflow for the Invoice Park and post which is working perfectly for the invoices. From the inbox the invoice is released by executing the work item. when i check the invoice document, the document is not getting posted, i believe there is a need to set up the user WF-BATCH, Could any body please advise as to how to set up the WF-BATCH so that the invoices get posted in the background.
Thanks a lot in advance....

Martin,
Thanks for your reply. But, my question is, what and how can we tackle the witems that are struck.
For example, in my case, the user has already taken decision from Portal side and he got a message that the approval task was successful and the witem is gone from his UWL. But, during this time, WF-BATCH was locked and so the "Result Processing" step that was done at the end of every witem execution, didn't happen. And hence the next witem also was not generated. But, if you see the wflow log, the witem status says, "COMPLETED". But if you expand the log for this step, then only we can see that the "Result Processing" was not completed by WF-BATCH.
In this situation, will the SWPC be useful in troubleshooting the COMPLETED witems ? Pl clarify. I don't have access to SWPC right now and will definitely explore this.
My biggest concern on this is, let us say, we have somany TRIP's in the middle of the approval process and the managers have already approved from their end. But, if the WF-BATCH is locked and no one noticed for a while, then it'll be a big task to identify each of these witems and Re-process them, even with SWPC,Right ?
Please update on this.
Thanks
venu

Need ff to release proxy setting - uninstall of new versions won't release

In the past our systems used a Proxy server, now they don't, and when FF opens it takes forever to open because it is trying to access the proxy. I have been able to remove older versions and it would ask in the uninstall if I wanted to keep settings (i believe user settings), if I checked the box during an uninstall, it would release the proxy server data on the new install. Then when I reinstalled FF, it would pull settings from IE and Internet settings. Newer versions keep proxy server settings, even though I remove Mozilla from C: Program Files. I have set up the settings as an administrator, and then when another person logs on, it doesn't pull the setup data. How can I get around this, I love FF, but I have many users that want to use it but they think it doesn't work so they use other browsers. :-(
Thanks for any assistance you can provide.

Instead of deleting your profile, try creating a new one. Here's how:
'''Create a new Firefox profile'''
A new profile will have your system-installed plugins (e.g., Flash) and extensions (e.g., security suite toolbars), but no themes, other extensions, or other customizations. It also should come with completely fresh settings databases and a fresh cache folder. '''However, if there is a lock file in Firefox's program folder, those preferences will be pushed into the new profile settings as well.'''
Exit Firefox and start up in the Profile Manager using Start > search box (or Run) -- type or paste the following and press Enter:
firefox.exe -P
''Don't delete anything here.''
Any time you want to switch profiles, exit Firefox and return to this dialog.
Click the Create Profile button, assign a name like March16, and ignore the option to change the folder location. Then start Firefox in the new profile you created.
Any improvement?
When returning to the Profile Manager, you might be tempted to use the Delete Profile button. But... it's a bit too easy to accidentally delete your "real" profile, so I recommend resisting the temptation. If you do want to clean up later, I suggest making a backup of all your profiles first in case something were to go wrong.

How to set the overall credit status as "partial release" on SO header?

Hey guys,
Do you have any idea on how did the overall credit status become "partial release" on sales order header level?
Because as my understanding in SAP, i am not sure whether there is a way to partial release a sales order with multiple item lines.
Jasper

Hi balajia,
after seeing your description i have gone to VKM4.
i have executed OVER ALL CREDIT STATUS with A.
then i am able to see one sales order with OVCS - 'A'.
then i have given OVCS as 'B' & also "C' - i am not able to see any sales order OVCS as B & C.
that means here there are options to use if OVCS in sales order status is B or C as it has executed for A.
so,
some where in sales order program it is hard coded i think so - i am saying this because there is a link between sales order header:
Delivery status Not delivered
Credit status Not performed
Overall blkd status Blocked
so if it is hard coded with B and C also you can use these options in VKM4.
that's is what my R & D on this says.
regadrs,
balajia

Firmware Versions 8.0(4)SR1 - Release notes

Hello I'm trying to find the release notes for the 8.04sr1 firmware. I clicked the link in the readme, and the page is not found on Cisco. Is there another place I can look to find the fixes in this release?

It is under the downloads page: http://www.cisco.com/cgi-bin/tablebuild.pl/ip-7900ser
Here is the direct link (you need a valid CCO): http://ftp-sj.cisco.com/cisco/voice/ip-7900ser/cmterm-7911_7906-sccp.8-0-4SR1-readme.htm

ERROR IN SAPROUTER STRING

Dear Team,
We are going to access sap from out side internet without using the office VPN or network.
Now I want to set SAP Router string thru which any person who wants to access our SAP system can do so without getting into our VPN or network. Basically people in Sales when they are at the customer sites.
My saprouter is working fine, as SAP can login to our systems.The NAT is completed so that does not seem any issue.
find the below is our configuration..
Our sap router has configured in SOLMAN SERVER.
For Solman server below are the IP:
132.147.166.3  Private IP for internal access
210.18.50.134Public IP address.
ROUTAB file is in the below path C:\usr\sap\saprouter.
Below is the content of ROUTAB file
SNC connection to and from SAP
KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 194.39.131.34 *
SNC connection to local system for R/3-Support
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 132.147.166.19 3202
Access from the local Network to SAP
P 192.168.. 194.39.131.34 3299
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 132.147.166.11 5631
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 132.147.166.11 23
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 132.147.166.19 3389
P * 194.39.131.34 3299
P "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" * *
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 132.147.166.7 3201
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 132.147.166.5 3200
KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 194.39.131.34 *
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 132.147.166.5 3389
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 132.147.166.7 3389
deny all other connections
D * * *
Now I want to access my production server with ip =132.147.166.11from outside .
So I had configured the below setting in Sap GUI .
Application server=132.147.166.11                   [public ip of server where saprouter has installed]
SAProuter String=/H/210.18.50.134/S/3299
system id=ELP
system number=02
but when i click on login it is showing below error..
router permission denied(210.18.50.134 to 132.147.166.11 ,sapdp02
location =saprouter 38.10 ON 'SOLMAN'
relese=700
version=38
returncode=-94
counter=012
Is it nacessary to make any change in routab file , as net work admin is saying problem is from saprouter to production server
please help us for the same
Regards
Rabin Nayak
SAP Basis Team

Dear Sourabh,
Thanks for your support, I am using /H/210.18.50.134/H/132.147.166.11/H/ for production server only
& /H/210.18.50.134/H/132.147.166.5/H/ for my developement server.
Please find the below is the Log of dev_rout file.
trc file: "dev_rout", trc level: 1, release: "700"
Mon Mar 29 10:51:26 2010
SAP Network Interface Router, Version 38.10
command line arg 0:     saprouter
command line arg 1:     -r
command line arg 2:     -S
command line arg 3:     3299
command line arg 4:     -K
command line arg 5:     p:CN=SOLMAN, OU=0000849045, OU=SAProuter, O=SAP, C=DE
SncInit(): Initializing Secure Network Communication (SNC)
      PC with Windows NT (mt,ascii,SAP_UC/size_t/void* = 8/32/32)
SncInit(): Trying environment variable SNC_LIB as a
      gssapi library name: "C:\usr\sap\saprouter\sapcrypto.dll".
File "C:\usr\sap\saprouter\sapcrypto.dll" dynamically loaded as GSS-API v2 library.
The internal Adapter for the loaded GSS-API mechanism identifies as:
Internal SNC-Adapter (Rev 1.0) to SECUDE 5/GSS-API v2
main: pid = 5260, ppid = 0, port = 3299, parent port = 0 (0 = parent is not a saprouter)
reading routtab: './saprouttab'
ERROR => invalid token (p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE) in IPadr-string, skip line 11 [nirout.cpp   8585]
Mon Mar 29 10:56:20 2010
checkRoute: route not permitted (15)
ERROR => NiRClientHandle: NiRExRouteCon for C1/-1 'mail.supremegroup.co.in' failed (rc=-94) [nirout.cpp   2243]
Mon Mar 29 10:56:44 2010
checkRoute: route not permitted (15)
ERROR => NiRClientHandle: NiRExRouteCon for C1/-1 'mail.supremegroup.co.in' failed (rc=-94) [nirout.cpp   2243]
Mon Mar 29 11:25:43 2010
checkRoute: route not permitted (15)
ERROR => NiRClientHandle: NiRExRouteCon for C1/-1 '210.18.50.134.sify.net' failed (rc=-94) [nirout.cpp   2243]
I had addedd another twolines in my routab file as below mentioned Hilited mark.
SNC connection to and from SAP
KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 194.39.131.34 *
SNC connection to local system for R/3-Support
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 132.147.166.19 3202
Access from the local Network to SAP
P 192.168.. 194.39.131.34 3299
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 132.147.166.11 5631
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 132.147.166.11 23
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 132.147.166.19 3389
P * 194.39.131.34 3299
P "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" * *
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 132.147.166.7 3201
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 132.147.166.5 3200
KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 194.39.131.34 *
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 132.147.166.5 3389
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 132.147.166.7 3389
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 132.147.166.5 3299
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 132.147.166.7 3299
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 132.147.166.11 3299
deny all other connections
D * * *
P * * *
I had checked my Public Ip already registered with SAP,still i am getting same error at time of login.
Regards
Rabin
Edited by: RABIN-SAP BASIS on Mar 29, 2010 8:03 AM

Installation problem with SolMan on SUSE 9,0 / Oracle

Hi Experts,
I have just started to work with SAP environment. My first challenge is to install Solution Manager on SUSE 9.0 Linux. I have faced quite lot of error messages and managed to solve them with help of support and forum pages. But the last mile seems to be the hardest one. Installation stopped on phase 42 / 45 (Configure System Landscape Directory) with following errors:
WARNING 2007-02-08 09:18:13
Execution of the command "/usr/sap/HSM/DVEBMGS01/exe/jlaunch UserCheck.jlaunch com.sap.security.tools.UserCheck /tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/install/lib:/tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/install/sharedlib:/tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/install -c sysnr=01 -c ashost=haukka -c client=001 -c user=DDIC -c XXXXXX -a checkCreate -u SLDDSUSER -p XXXXXX -message_file UserCheck.message" finished with return code 4. Output:
Warning: tmpfs at /dev/shm is configured quite small with 1956 MB! Minimum value is 2048 MB.
Recommended size is 75 % of RAM + swap.
Warning: tmpfs at /dev/shm is configured quite small with 1956 MB! Minimum value is 2048 MB.
Recommended size is 75 % of RAM + swap.
Feb 8, 2007 9:18:10 AM   Info: User management tool (com.sap.security.tools.UserCheck) called for action "checkCreate"
Feb 8, 2007 9:18:11 AM   Error: Exception during execution of the operation
[EXCEPTION]
com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed
Connect_PM TYPE=A ASHOST=haukka SYSNR=01 GWHOST=haukka GWSERV=sapgw01 PCS=1
LOCATION    CPIC (TCP/IP) on local host with Unicode
ERROR       partner 'haukka:sapgw01' not reached
TIME        Thu Feb 8 09:18:11 2007
RELEASE     700
COMPONENT   NI (network interface)
VERSION     38
RC          -10
MODULE      nixxi.cpp
LINE        2764
DETAIL      NiPConnect2
SYSTEM CALL connect
ERRNO       111
ERRNO TEXT Connection refused
COUNTER     2
     at com.sap.mw.jco.MiddlewareJRfc.generateJCoException(MiddlewareJRfc.java:456)
     at com.sap.mw.jco.MiddlewareJRfc$Client.connect(MiddlewareJRfc.java:922)
     at com.sap.mw.jco.JCO$Client.connect(JCO.java:3171)
     at com.sap.security.tools.UserCheck.main(UserCheck.java:172)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
Feb 8, 2007 9:18:12 AM   Info: Leaving with return code 4
INFO 2007-02-08 09:18:13
Removing file /tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/dev_UserCheck.
INFO 2007-02-08 09:18:13
Removing file /tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/dev_UserCheck.clone.
ERROR 2007-02-08 09:18:13
CJS-30196 Connect to SAP gateway failed
Connect_PM TYPE=A ASHOST=haukka SYSNR=01 GWHOST=haukka GWSERV=sapgw01 PCS=1
LOCATION    CPIC (TCP/IP) on local host with Unicode
ERROR       partner 'haukka:sapgw01' not reached
TIME        Thu Feb 8 09:18:11 2007
RELEASE     700
COMPONENT   NI (network interface)
VERSION     38
RC          -10
MODULE      nixxi.cpp
LINE        2764
DETAIL      NiPConnect2
SYSTEM CALL connect
ERRNO       111
ERRNO TEXT Connection refused
COUNTER     2
ERROR 2007-02-08 09:18:13
FCO-00011 The step createSLDDSUser with step key |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features_Configuration|ind|ind|ind|ind|5|0|NW_Usage_Types_Configuration_AS|ind|ind|ind|ind|0|0|NW_CONFIG_SLD|ind|ind|ind|ind|0|0|createSLDDSUser was executed with status ERROR .
I have stopped the installation, rebooted the system and started the installation again. Well that didnt help at all. After that I have to start Oracle database and listener to proceed with old installation.
Can you give me any advices how to solve this problem and finish the installation?
Grateful for help.
Jukka

Hi Dolores,
Thank you for your advices.
I would appreciate further assistance with this problem because I couldnt work it out jet.
I logged in to the Visual Admin by using go file in usr/sap/HSM/DVEBMGS01/j2ee/admin.
The Visual Administrator screen is opening but I cannot connect in.
The error message popping up is "Cannot open connection on host xx.yy.xx.yy and port 50004".
The login parameters specified are:
Display name: j2ee
User name: Administrator / (J2EE_ADMIN)
Host: localhost
HTTP Port: 50004
Load balancing method: manual
Transport layer: default
I tried with two different username, see above.
I also tried DDIC user logon via ssh command in Shell console, but didnt succeed.
Here is the information in some of those files your mentioned:
trc file: "dev_rd", trc level: 1, release: "700"
Wed Jan 31 10:47:35 2007
***LOG S00=> GwInitReader, gateway started ( 19402) [gwxxrd.c     1677]
systemid   387 (Intel x86 with Linux)
relno      7000
patchlevel 0
patchno    46
intno      20050900
make:      single threaded, Unicode, optimized
pid        19402
gateway runs with dp version 210000(ext=109000) (@(#) DPLIB-INT-VERSION-210000-UC)
Wed Jan 31 10:47:37 2007
gw/local_addr : 0.0.0.0
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
Wed Jan 31 10:48:05 2007
Bind service sapgw01 (socket) to port 3301
Wed Jan 31 10:48:06 2007
GwPrintMyHostAddr: my host addresses are :
1 : [192.168.229.131] haukka (HOSTNAME)
2 : [127.0.0.1] localhost (LOCALHOST)
Wed Jan 31 10:48:07 2007
DpSysAdmExtCreate: ABAP is active
DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
Wed Jan 31 10:48:57 2007
DpShMCreate: sizeof(wp_adm)          12744     (1416)
DpShMCreate: sizeof(tm_adm)          4011160     (19956)
DpShMCreate: sizeof(wp_ca_adm)          28800     (96)
DpShMCreate: sizeof(appc_ca_adm)     9600     (96)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/520056/520064
DpShMCreate: sizeof(comm_adm)          520064     (1032)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm)          0     (68)
DpShMCreate: sizeof(vmc_adm)          0     (1596)
DpShMCreate: sizeof(wall_adm)          (38456/34360/80/184)
DpShMCreate: sizeof(gw_adm)     48
DpShMCreate: SHM_DP_ADM_KEY          (addr: 0x457a0000, size: 4663248)
DpShMCreate: allocated sys_adm at 0x457a0000
DpShMCreate: allocated wp_adm at 0x457a1e88
DpShMCreate: allocated tm_adm_list at 0x457a5050
DpShMCreate: allocated tm_adm at 0x457a5080
DpShMCreate: allocated appc_ca_adm at 0x45b7f598
DpShMCreate: allocated comm_adm at 0x45b81b18
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0x45c00a98
DpShMCreate: allocated gw_adm at 0x45c00ad8
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 0x45c00b08
Wed Jan 31 10:48:58 2007
MtxInit: -2 0 0
Wed Jan 31 10:49:38 2007
GwDpInit: attached to gw_adm at 0x45c00ad8
Wed Jan 31 10:49:39 2007
***LOG Q0I=> NiIWrite: writev (32: Broken pipe) [nixxi.cpp 3797]
ERROR => NiIWrite: SiSendV failed for hdl 1 / sock 12
     (SI_ECONN_BROKEN; UD; ST; 127.0.0.1:0) [nixxi.cpp    3797]
LOCATION    SAP-Gateway on host haukka / sapgw01
ERROR       connection to partner 'localhost:0' broken
TIME        Wed Jan 31 10:49:39 2007
RELEASE     700
COMPONENT   NI (network interface)
VERSION     38
RC          -6
MODULE      nixxi.cpp
LINE        3797
DETAIL      NiIWrite
SYSTEM CALL writev
ERRNO       32
ERRNO TEXT Broken pipe
COUNTER     1
ERROR => GwIConnectHandle GwWrite failed (NIECONN_BROKEN) [gwxxrd.c     8689]
C-STACK -
(CTrcStack2+0x78)[0x80c1938]
(SigIGenAction+0x2d1)[0x81e9451]
[0xffffe440]
trc file: "sapstartsrv.log", trc level: 0, release: "700"
Thu Feb 8 09:15:05 2007
<<- ERROR: SapSSLInit(read_profile=1)==SSSLERR_LIB_NOT_FOUND
SapSSLInit failed => https support disabled
Webservice thread started, listening on port 50013
Trusted http connect via Unix domain socket '/tmp/.sapstream50013' enabled.
trc file: "dev_disp.new", trc level: 1, release: "700"
sysno      01
sid        HSM
systemid   387 (Intel x86 with Linux)
relno      7000
patchlevel 0
patchno    48
intno      20050900
make:      single threaded, Unicode, optimized
pid        19381
Wed Jan 31 10:48:07 2007
CCMS: start to initalize 3.X shared alert area (first segment).
Wed Jan 31 10:48:10 2007
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
DpMsgAdmin: Set patchno for this platform to 48
Release check o.K.
Wed Jan 31 10:49:57 2007
MBUF state ACTIVE
Wed Jan 31 10:50:11 2007
DpModState: change server state from STARTING to ACTIVE
Wed Jan 31 10:50:18 2007
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
For some reason the latest files are dated 1.2.2007?
Hopefully You can see the problem from this log file information.
As I mentioned earlier I am a green novice at SAP systems and Linux.
Best regards
Jukka

SOLMAN monitoring of SAP XI/PI interfaces

Hello! ALL
We have been leveraging SAP XI/PI monitoring capabilities using the Alter Framework: ALRTCATDEF and setting up alert rules in RWB.
However, we would like to start leveraging SOLMAN monitoring features for monitoring SAP XI/PI interfaces.
Please, let us know if anyone has been using SOLMAN for monitoring SAP XI/PI AE & IE interface errors AND how it can be done; so that we can work with Basis in getting this set up in SOLMAN.
Any info - or - documentation and links related to SOLMAN monitoring of SAP XI/PI interfaces would help.
Your help is greatly appreciated!!
Thank you,
Ritu

Hi,
Please check below thread. You can use BPM functionality of Sol Man for Monitoring.
[Re: Central monitoring in SOLAM+ALE status]
Regards,
Gouri

Dispathcher not starting after SOLMAN instllation

I have installed a solutin Manager. Immediately after installation i restarted the SOLMAN and the dispatcher is nto starting.
Pls hlep
PFB the log
<b>----
trc file: "dev_disp", trc level: 1, release: "700"
sysno      00
sid        SOL
systemid   560 (PC with Windows NT)
relno      7000
patchlevel 0
patchno    111
intno      20050900
make:      multithreaded, Unicode, optimized
pid        5016
Thu Oct 25 22:45:17 2007
kernel runs with dp version 229000(ext=109000) (@(#) DPLIB-INT-VERSION-229000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 5016) [dpxxdisp.c   1239]
     shared lib "dw_xml.dll" version 111 successfully loaded
     shared lib "dw_xtc.dll" version 111 successfully loaded
     shared lib "dw_stl.dll" version 111 successfully loaded
     shared lib "dw_gui.dll" version 111 successfully loaded
     shared lib "dw_mdm.dll" version 111 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Thu Oct 25 22:45:22 2007
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5361]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >SCDDEVSAP02_SOL_00                      <
DpShMCreate: sizeof(wp_adm)          20104     (1436)
DpShMCreate: sizeof(tm_adm)          4232256     (21056)
DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm)          528064     (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm)          0     (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm)          0     (72)
DpShMCreate: sizeof(vmc_adm)          0     (1536)
DpShMCreate: sizeof(wall_adm)          (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm)     48
DpShMCreate: SHM_DP_ADM_KEY          (addr: 06A10040, size: 4893744)
DpShMCreate: allocated sys_adm at 06A10040
DpShMCreate: allocated wp_adm at 06A12090
DpShMCreate: allocated tm_adm_list at 06A16F18
DpShMCreate: allocated tm_adm at 06A16F48
DpShMCreate: allocated wp_ca_adm at 06E20388
DpShMCreate: allocated appc_ca_adm at 06E26148
DpShMCreate: allocated comm_adm at 06E28088
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 06EA8F48
DpShMCreate: allocated gw_adm at 06EA8F88
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 06EA8FB8
DpShMCreate: allocated wall_adm at 06EA8FC0
MBUF state OFF
DpCommInitTable: init table for 500 entries
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 511 blocks reserved for free list.
ES initialized.
J2EE server info
start = TRUE
state = STARTED
pid = 3612
argv[0] = D:\usr\sap\SOL\DVEBMGS00\exe\jcontrol.EXE
argv[1] = D:\usr\sap\SOL\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\SOL\SYS\profile\SOL_DVEBMGS00_SCDDEVSAP02
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=4889
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=SOL
argv[7] = -DSAPMYNAME=SCDDEVSAP02_SOL_00
argv[8] = -DSAPPROFILE=D:\usr\sap\SOL\SYS\profile\SOL_DVEBMGS00_SCDDEVSAP02
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c   1629]
Thu Oct 25 22:45:23 2007
***LOG Q0K=> DpMsAttach, mscon ( SCDDEVSAP02) [dpxxdisp.c   11753]
DpStartStopMsg: send start message (myname is >SCDDEVSAP02_SOL_00                      <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
Thu Oct 25 22:45:24 2007
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
DpMsgAdmin: Set patchno for this platform to 111
Release check o.K.
DpJ2eeLogin: j2ee state = CONNECTED
Thu Oct 25 22:45:35 2007
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4248]
ERROR => NiIRead: SiRecv failed for hdl 4 / sock 1456
    (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:4896) [nixxi.cpp    4248]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=3612)
ERROR => DpProcKill: kill failed [dpntdisp.c   371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Thu Oct 25 22:46:03 2007
ERROR => W0 (pid 5300) died [dpxxdisp.c   14441]
ERROR => W1 (pid 5304) died [dpxxdisp.c   14441]
ERROR => W2 (pid 988) died [dpxxdisp.c   14441]
ERROR => W3 (pid 3960) died [dpxxdisp.c   14441]
ERROR => W4 (pid 4448) died [dpxxdisp.c   14441]
ERROR => W5 (pid 5284) died [dpxxdisp.c   14441]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W6 (pid 5328) died [dpxxdisp.c   14441]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W7 (pid 5080) died [dpxxdisp.c   14441]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W8 (pid 5232) died [dpxxdisp.c   14441]
ERROR => W9 (pid 3380) died [dpxxdisp.c   14441]
ERROR => W10 (pid 3652) died [dpxxdisp.c   14441]
ERROR => W11 (pid 5340) died [dpxxdisp.c   14441]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W12 (pid 5288) died [dpxxdisp.c   14441]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W13 (pid 5336) died [dpxxdisp.c   14441]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 25 22:46:13 2007
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long)               Fri Oct 26 05:46:13 2007
========================
No Ty. Pid      Status Cause Start Err Sem CPU    Time Program          Cl User         Action                    Table
0 DIA     5300 Ended         no      1   0        0
1 DIA     5304 Ended         no      1   0        0
2 DIA      988 Ended         no      1   0        0
3 DIA     3960 Ended         no      1   0        0
4 DIA     4448 Ended         no      1   0        0
5 DIA     5284 Ended         no      1   0        0
6 UPD     5328 Ended         no      1   0        0
7 ENQ     5080 Ended         no      1   0        0
8 BTC     5232 Ended         no      1   0        0
9 BTC     3380 Ended         no      1   0        0
10 BTC     3652 Ended         no      1   0        0
11 BTC     5340 Ended         no      1   0        0
12 SPO     5288 Ended         no      1   0        0
13 UP2     5336 Ended         no      1   0        0
Dispatcher Queue Statistics               Fri Oct 26 05:46:13 2007
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
2
2000
6
6
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id          12
wake_evt_udp_now     0
wake events           total     8, udp     7 ( 87%), shm     1 ( 12%)
since last update     total     8, udp     7 ( 87%), shm     1 ( 12%)
Dump of tm_adm structure:               Fri Oct 26 05:46:13 2007
=========================
Term    uid man user    term   lastop mod wp ta   a/i (modes)
Workprocess Comm. Area Blocks               Fri Oct 26 05:46:13 2007
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 25 22:46:18 2007
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >SCDDEVSAP02_SOL_00                      < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (1480) (SOFT_KILL)
Stop icman
killing process (308) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:1480 HANDLE:1556)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 25 22:46:19 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:1480 HANDLE:1556)
wait for end of icman
[DpProcDied] Process lives (PID:308 HANDLE:1560)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 25 22:46:20 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:308 HANDLE:1560)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 25 22:46:21 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:308 HANDLE:1560)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 25 22:46:22 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:308 HANDLE:1560)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 25 22:46:23 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:308 HANDLE:1560)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 25 22:46:24 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:308 HANDLE:1560)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 25 22:46:25 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:308 HANDLE:1560)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 25 22:46:26 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:308 HANDLE:1560)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 25 22:46:27 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:308 HANDLE:1560)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 25 22:46:28 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:308 HANDLE:1560)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 25 22:46:29 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:308 HANDLE:1560)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 25 22:46:30 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:308 HANDLE:1560)
[DpProcDied] Process died (PID:3612 HANDLE:1540)
DpStartStopMsg: send stop message (myname is >SCDDEVSAP02_SOL_00                      <)
NiIMyHostName: hostname = 'SCDDEVSAP02'
AdGetSelfIdentRecord: >                                                                           <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name                    -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIRead: read for hdl 3 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name           MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 3 (r)
NiIRead: hdl 3 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER          , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
Thu Oct 25 22:46:31 2007
NiIPeek: peek for hdl 3 timed out (r; 1000ms)
NiIRead: read for hdl 3 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c   12099]
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 3 in set0
SiSelNSet: set events of sock 1480 to: ---
NiBufISelRemove: remove hdl 3 from set0
SiSelNRemove: removed sock 1480 (pos=3)
SiSelNRemove: removed sock 1480
NiSelIRemove: removed hdl 3
MBUF state OFF
AdGetSelfIdentRecord: >                                                                           <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/14
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 3 / sock 1480
NiBufIClose: clear extension for hdl 3
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 5016) [dpxxdisp.c   10371]
Good Bye .....</b>

hi,
in windows services check the oracle service and also listner service oracle SID service are running.also check sap services are running.those are not running start it manually and then try.
regards
ajai

Job scheduling in solman

Hi All,
We want to configure only batch job monitoring in our Solution Manage 7.0 and we already configured initial and basic s setting in our solman.
Any suggestion on how to proceed further..
Regards,
Panu

hI
Here the best practice guide [batch job monitoring in Solman|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/97d2e8b3-0b01-0010-b787-b8ce558a51c2?quicklink=index&overridelayout=true]
if you look for business process monitoring chk here
ttps://service.sap.com/bpm --> Media Library --> Technical Information > bpm guide
Hope this helps
Jansi

Solution Manager 3.2 SR1 Install Problem

Hello everybody,
I'm having a hard time trying to install SAP SolMan 3.2 SR1 on Windows Server 2003 x86_64 with Oracle 10.2.
I have installed the OS and Oracle 10.2.
When I start the installation of CI of SolMan after couple of screens it gives me the error:
CJS-00030 Assertion failed: No db client software version available in tORA_ClientVersion for client type AMD64
I have searched for days google and other forums and couldn't find an answer.
Any help would be very much appreciated.
Thanks in advance.

Hi Stanislav,
The current Oracle 10.2.0.2 is at level patch-14 ( http://service.sap.com/swcenter-3pmain). So, that patch (10202_Patch14_MSWINX86-64.zip ) should be fine,
Also there you will have Oracle Install client OCL10264.SAR.
But, I'm now thinking of the point Markus mentioned earlier about compatibity in 6.40 kernel and Oracle 10g. You might have a look at note 949116.
In that case it might be you will have to go for SolMan 4.0 (based on WAS 7.00). If you are only using ABAP stack (no Solution Manager Diagnostics), they must be almost same.
Cheers !!
Satya.

SMD Version for Solman 7.1 on SLES10.3

Hi
We have set up a Solman 7.1 and need to install an additional SMD because Solman was a distributed install.
We use SLES 10SP3 as operating system, but Solman 7.1 requires SMD 7.30, which requires SLES 11.
What is best practice? Install an earlier SMD or disregard the warning (prerequisite check error) during SMD install?
BR
Kanan

Hi,
I would suggest you to go with SAP recommendation if it does not supported then don't install it otherwise in production environment, you will not get any support from SAP if it does not supported.
Thanks
Sunny

Install SolMan 4.0SR1 instead of 4.0 !

Hi all,
I know, SolMan 4.0 SR1 is out for 8-12 weeks now, but unfortunately - mostly because of older shipments - some customers still do have 4.0 (SR0) which is really complicated to install. As I had just yesterday again a customer trying this, I wanted to please ask you to check the SolMan packs and then order an SR1 if you shouldn't find SR1 on the SolMan box.
I did 4.0 SR1 installations totally smooth without any issues (perhaps 1-2 repeats - but that was it). So, thanks a lot to the IBM/SAP team for creating this SR1 package instead of trying to make the 4.0 package possible with "millions of notes" )
Regards
Volker Gueldenpfennig, consolut.gmbh
http://www.consolut.de - http://www.4soi.de - http://www.easymarketplace.de

What's your question? Is it OK? That's entirely your call.
You'll not have access to the new features in Xcode and Objective C and iOS 5, including the integration of Interface Builder into Xcode 4, and the Objective C ARC reference counting features.
But what you'll have should work.
You'll end up sorting out the examples and documentation that has dependencies on the newer versions, but that's expected.
The developer forums see more traffic, and (if your'e getting started and not in the developer program) you'll want to avail yourself of the mailing lists including the Apple Xcode User's mailing list, and discussions such as this one at StackOverflow.

SAPRouter set up in Solman 7.1 sr1 release

Similar Messages

Maybe you are looking for