SAPSCRIPT appears with blank fields

Hello Guys,
I am finding a problem with a SAPscript.
Running directly my program Z(SE38) , it select the P.O.tables(EKKO, EKPO,...) correctly, calls my ZSAPSCRIPT correctly and I can preview, It's OK.
It Has made the parameterization and calling via printing preview in ME22N. The sapscript windows appears entirely but no field or variable are displayed. I put a break on my Zprogram and the program is called correctly, all the selections are loaded normally, but it does not show any content, only the fixed ones in the SAPSCRIPT.

How exactly did you code your Z print program?
The PO print process will provide the output request record in table work area NAST. Based on that, the output program will retrieve the relevant PO data and process the output.
Not knowing how your program is coded makes it hard to comment on your problem, but I suspect there is a disconnect between processing the output request record and your print program. If your program (and starting subroutine) expects the PO number in a different way than using NAST, this won't work.
The best you can do is take a look at the standard print program SAPFM06P, subroutine ENTRY_NEU and model your data retrieval after that.

Similar Messages

Is there a way you can make a contact page with blank fields to put info. on iWeb and submit it to my email?

is there a way you can make a contact page with blank fields to put info. on iWeb and submit it to my email?

It depends on where you publish.
MobileMe users need to use a form service or MailShoot...
http://www.iwebformusicians.com/Website-Email-Marketing/Form-Service.html
http://www.iwebformusicians.com/Website-Email-Marketing/MailShoot.html
If you publish to another server that supports php you can do it yourself...
http://www.iwebformusicians.com/Website-Email-Marketing/Contact-Form.html
"I may receive some form of compensation, financial or otherwise, from my recommendation or link."

PDF file opening with blank fields - the field values are not populated.

Recently, our users have been facing this issue, "data not populating in the PDF fields".
We are using FDF in PHP to load the PDF templates and apply the data to the PDF fields. This works fine on many adobe versions but showing empty fields in few adobe versions. For e.g It worked fine with Adobe Reader 10.1.3 but did not work in 11.0.
This has been critical now as it is showing empty fields in IE11. Can you please help me overcome this issue.
Thanks!

All I can suggest is to try the latest Reader versions, i.e. 10.1.11 or 11.0.8.

Sending Master IDocs with blank fields

Hi iDoc Experts,
I'm sending Driver Master data to external system through IDoc type OILDRV01.
The external system need the IDoc data in consistent state, but I have a problem when a field is blank in the master table OIGD the corresponding tag doesn't get generated.
For example, when driverstatus field is blank the generated IDoc is missing the drvstatus tag altogether, and the iDoc structure becomes inconsistent. So, I need to make this a mandatory field.
I was trying to extend the original IDoc type OILDRV01, but that doesn't seem like a reliable option.
I wonder if I could achieve this though an enhancement to FM: MASTERIDOC_CREATE_SMD_OILDRV01.
But I don't know the necessary steps to do this.
Any suggestion would be greatly appreciated.
Thanks in Advance

Hi Experts,
As u suggested this Enhancement was worked fine.
But the IDoc tag <DRVSTATUS></DRVSTATUS> is still not getting generated.
It's not clear what I'm missing here.
Pls, any suggestion will be greatly appreciated.
Rgrds
Kaushalya

How to make the page blank field in runtime

Dear
when i will run the page the fields shoud come with blank Field.
i want to make it in runtime.
example- i have one page having employees data. but when i will run that page the data will not come only blank fields should come,

rakesh,
af:panelformlayout
see the naveeth comments.
You are following a wrong design for your application.
If there are no rows in the VO instance, show the message as 'There are no rows'.
What is the use-case that you have - in order to do the same for all the pages in the application.

How can I turn off Recently Websites when opening new Safari window? After tapping on the two overlapping boxes on the bottom right of Safari, a new blank window appears with Favorites, but now in iOS 8, recently viewed websites are listed.

How can I turn off Recently Visited Websites when opening new Safari window?
After tapping on the two overlapping boxes on the bottom right of Safari, a new blank window appears with Favorites, but now in iOS 8, recently viewed websites are listed. How can I turn this function off? I do NOT want my new Safari windows to have history displayed of previous websites I visited. I only want my Favorites (on the top) to be displayed. Please help.
Thank you for your time, patience, understanding, kindness, and concern.

Thanks for replying, but that isn't the answer I am looking for. Also, there is no + sign, UNLESS you do tap the overlapping boxes.
Let me try to ask my question a little more clearly:
When I tap the two overlapping boxes on the lower left (the option to Open New Windows), the new Window that appears will show your Bookmarked FAVORITES. But with my new iPhone 6, and the new iOS 8.0.2, when I tap the two boxes to open a New Window, my Bookmark Favorites show (as they always have and should), but below them, there is a dividing line underneath them, and it says Recently Viewed Websites, and has these websites available to tap.
So my question is, HOW DO I TURN THESE OPTION OFF?
*UPDATE (10.13.14): Since I have asked this question, I no longer see these Recently Viewed Websites under my Bookmarked Favorites in my new Window tabs. So I hope that Apple fixed it, or somehow it was a mistake, or somehow I changed an Option on my iPhone 6 that stopped this for reoccurring.
Thank you for your help bobseufert! I appreciate your concern, kindness, and the time to try to help. I am grateful.
Have a blessed day.

Issue with fill in the blank field and back button.

I am working in CP4 AS2. I have create a page of fill in the blank fields to simulate filling in a form. On the next slide, I show the answers by extracting the variables into text boxes. I have a back and a next button and instruct the user to review their answers and if incorrect, to select the back button in order to reenter the data. I have the back button set to jump to the previous slide by number (i've tried previous, last slide, etc...)
The flash movie freezes when I select the back button. I think flash is having trouble going back to the fill in the blank fields from the displayed variables. Any ideas? or work arounds for this. The idea solution would take them back to the page with the data already in the fields so they could correct the errors only and then return to the review page.
Thanks
Scott

Hi there
Is scoring enabled on these? If so, perhaps your quiz settings are preventing backward movement.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Mail from Exchange 2010 mailbox - BCC to Hotmail addresses with blank To: field not hounoured

Hi
This feels related to a previous question
http://social.technet.microsoft.com/Forums/exchange/en-US/bec88844-79c1-4d17-bf73-9425842b22de/problem-sending-mail-with-bcc-and-without-to?forum=exchangesvrgenerallegacy but is slightly different - it just applies to Hotmail and related addresses (e.g.
hotmail.com, hotmail.co.uk, outlook.com, live.co.uk).
Sending from our Exchange 2010 to BCC addresses with blank To: field, the BCC is not being honoured, but just by Hotmail-related addresses. Any Hotmail-related recipient sent to in this fashion sees all their and other Hotmail-related addresses in the To:
field. But any other addresses to other mail hosts (gmail, yahoo etc) in the same BCC list aren't shown, and recipients at the other mail hosts have a fully hidden BCC list (i.e. see no To addresses at all).
If the To: field has an address then there is no problem - all BCC addresses are hidden for all recipients as expected.
It feels like it is the way the header is being handled by the Hotmail MTAs. But I only see this behaviour from our Exchange 2010 servers (including test servers).
Below are message headers from examples - anyone any ideas on this?
Thanks,
Gordon
Headers from the same message sent as a BCC to a "@live.co.uk" address and "@gmail.com" address with no To: field, and below that a header of similar with a To: field.
First message, sent from [email protected] (gets translated to
[email protected]) BCCd to
[email protected] and [email protected] with no To: address.
Seen in mailbox of [email protected] (note the "to:" field at the bottom - this is what is being shown in the UI):
x-store-info:J++/JTCzmObr++wNraA4Pa4f5Xd6uensaUSop/gUCq9urBwwSF/6FOwwl1Py7H+wW1z5lc55JnUJDXNvxmGUxkw/bnnWJePWYXWzuS5Ywv2HQzl2GD+3A6SoaKpjD5JlShFHg3JE6so=
Authentication-Results: hotmail.com; spf=pass (sender IP is 143.52.X.XX)
[email protected]; dkim=none header.d=shu.ac.uk; x-hmca=pass
[email protected]
X-SID-PRA: [email protected]
X-AUTH-Result: PASS
X-SID-Result: PASS
X-Message-Status: n:n
X-Message-Delivery: Vj0xLjE7dXM9MDtsPTE7YT0xO0Q9MTtHRD0xO1NDTD0w
X-Message-Info: NhFq/7gR1vQRHV6jbdvQfibhgw1iwvrSqdhXuaSscqGalY1BHnH2KCdI+PRBKCQiYnAlF/zI6HIxnd9XTtPz9XHPDwg5mATFcpFtv9WV5ImszG0/OtQaSIg5iX4MbuVLCVo+t2VN/SyhCbwRod9LNPet1UXZtp+Oho5aLYTKlYQVRQ8OWRHqxMCUhgER4oHof+Be4v85/e3u59xr9Q2GEVPOpY/FDKse
Received: from MTA2.shu.ac.uk ([143.52.X.XX]) by SNT004-MC4F19.hotmail.com with Microsoft SMTPSVC(7.5.7601.22712);
Wed, 10 Sep 2014 03:56:32 -0700
Received: from MTA1 ([10.14.XXX.XXX])
by MTA2.shu.ac.uk with esmtp (Exim 4.76)
(envelope-from <[email protected]>)
id 1XRfZg-0004Kn-9C
for [email protected]; Wed, 10 Sep 2014 11:56:32 +0100
Received: from CAS1.shu.ac.uk ([10.14.XX.XX])
by MTA1 with esmtp (Exim 4.80.1)
(envelope-from <[email protected]>)
id 1XRfZg-0002cz-2q; Wed, 10 Sep 2014 11:56:32 +0100
Received: from MBX1.shu.ac.uk ([xxxx::xxxx:xxxx:xxxx:xxxx]) by
CAS1.shu.ac.uk ([xxxx::xxxx:10.14.XX.XX%12]) with mapi id
14.03.0174.001; Wed, 10 Sep 2014 11:56:29 +0100
From: "user1" <[email protected]>
Subject: RE: PLease ignore yet again! testing Bcc again - no "to" field
Thread-Topic: PLease ignore yet again! testing Bcc again - no "to" field
Thread-Index: Ac/M5d+WfHZZ5GLGRsCfXxvcxsjnbw==
Date: Wed, 10 Sep 2014 10:56:28 +0000
Message-ID: <[email protected]>
Accept-Language: en-GB, en-US
Content-Language: en-US
X-MS-Has-Attach:
X-MS-TNEF-Correlator:
x-originating-ip: [10.14.XXX.XXX]
Content-Type: multipart/alternative;
boundary="_000_24BACA8040C3054487601DFC4087062C8C013974mbx1sh_"
MIME-Version: 1.0
to: [email protected]
Return-Path: [email protected]
X-OriginalArrivalTime: 10 Sep 2014 10:56:33.0151 (UTC) FILETIME=[E23190F0:01CFCCE5]
Seen in mailbox of [email protected]:
Delivered-To: [email protected]
Received: by 10.25.156.200 with SMTP id f191csp386624lfe;
        Wed, 10 Sep 2014 03:56:32 -0700 (PDT)
X-Received: by 10.194.200.137 with SMTP id js9mr48633666wjc.90.1410346592418;
        Wed, 10 Sep 2014 03:56:32 -0700 (PDT)
Return-Path: <[email protected]>
Received: from MTA1 (MTA1. [143.52.X.XXX])
        by mx.google.com with ESMTPS id cg3si20369633wjc.56.2014.09.10.03.56.32
        for <[email protected]>
        (version=TLSv1.2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128/128);
        Wed, 10 Sep 2014 03:56:32 -0700 (PDT)
Received-SPF: pass (google.com: domain of [email protected] designates 143.52.X.XXX as permitted sender) client-ip=143.52.X.XXX;
Authentication-Results: mx.google.com;
       spf=pass (google.com: domain of
[email protected] designates 143.52.X.XXX as permitted sender)
[email protected]
Received: from CAS1.shu.ac.uk ([10.14.XX.XX])
by MTA1 with esmtp (Exim 4.80.1)
(envelope-from <[email protected]>)
id 1XRfZg-0002cz-2q; Wed, 10 Sep 2014 11:56:32 +0100
Received: from MBX1.shu.ac.uk ([xxxx::xxxx:xxxx:xxxx:xxxx]) by
CAS1.shu.ac.uk ([xxxx::xxxx:10.14.XX.XX%12]) with mapi id
14.03.0174.001; Wed, 10 Sep 2014 11:56:29 +0100
From: "user1" <[email protected]>
Subject: RE: PLease ignore yet again! testing Bcc again - no "to" field
Thread-Topic: PLease ignore yet again! testing Bcc again - no "to" field
Thread-Index: Ac/M5d+WfHZZ5GLGRsCfXxvcxsjnbw==
Date: Wed, 10 Sep 2014 10:56:28 +0000
Message-ID: <[email protected]>
Accept-Language: en-GB, en-US
Content-Language: en-US
X-MS-Has-Attach:
X-MS-TNEF-Correlator:
x-originating-ip: [10.14.XXX.XXX]
Content-Type: multipart/alternative;
boundary="_000_24BACA8040C3054487601DFC4087062C8C013974mbx1sh_"
MIME-Version: 1.0
Similar message sent with [email protected] in To: field: from
[email protected]/[email protected] BCCd to
[email protected] and
[email protected] as seen in mailbox of [email protected]
x-store-info:J++/JTCzmObr++wNraA4Pa4f5Xd6uensaUSop/gUCq9v81cBAiz99O+8SxkfBVJ9NjbAXH8xe1rjvemR/ciBJT5MdkHvi8JYPj0vgDySrSfVnSG2OjgyyKNgjV2QF5PyGqXgRRVkQVM=
Authentication-Results: hotmail.com; spf=pass (sender IP is 143.52.X.XX)
[email protected]; dkim=none header.d=shu.ac.uk; x-hmca=pass
[email protected]
X-SID-PRA: [email protected]
X-AUTH-Result: PASS
X-SID-Result: PASS
X-Message-Status: n:n
X-Message-Delivery: Vj0xLjE7dXM9MDtsPTE7YT0xO0Q9MTtHRD0xO1NDTD0w
X-Message-Info: NhFq/7gR1vTvTqmPqDcS3ZKVZ4zJXdbe/WQhPCDn6U7TYJxfLAm+gALYf9z8EvjEIPauVTBwIF/uNFwreEfp3wgBZYYA8nUP8PFhNAMvRkDwCAnqdyWkFMZlNIQlCYkX84PJFTI7+qoRwxyIjAr2dfuXuj/qYYgN8IbRFD0FftK7d85hSKx/muFfL/1x713Efp1R2ztH/sUzvcxbXl+i8zHWvMqqF945
Received: from MTA2.shu.ac.uk ([143.52.X.XX]) by BAY004-MC6F14.hotmail.com with Microsoft SMTPSVC(7.5.7601.22712);
Wed, 10 Sep 2014 05:22:06 -0700
Received: from MTA1 ([10.14.XXX.XXX])
by MTA2.shu.ac.uk with esmtp (Exim 4.76)
(envelope-from <[email protected]>)
id 1XRguU-0006jA-4s
for [email protected]; Wed, 10 Sep 2014 13:22:06 +0100
Received: from CAS2.shu.ac.uk ([10.14.XX.XX])
by MTA1.shu.ac.uk with esmtp (Exim 4.80.1)
(envelope-from <[email protected]>)
id 1XRguU-0001YY-0a; Wed, 10 Sep 2014 13:22:06 +0100
Received: from MBX1.shu.ac.uk ([xxxx::xxxx:xxxx:xxxx:xxxx]) by
CAS2.shu.ac.uk ([xxxx::xxxx:10.14.XX.XX%15]) with mapi id
14.03.0174.001; Wed, 10 Sep 2014 13:22:00 +0100
From: "user1" <[email protected]>
Subject: test BCC - using own name in To
Thread-Topic: test BCC - using own name in To
Thread-Index: Ac/M8dJDWdvoIxoORH2RMAqNKM2m1w==
Date: Wed, 10 Sep 2014 12:22:00 +0000
Message-ID: <[email protected]>
Accept-Language: en-GB, en-US
Content-Language: en-US
X-MS-Has-Attach:
X-MS-TNEF-Correlator:
x-originating-ip: [10.14.XXX.XXX]
Content-Type: multipart/alternative;
boundary="_000_24BACA8040C3054487601DFC4087062C8C013A65mbx1sh_"
MIME-Version: 1.0
To: [email protected]
Return-Path: [email protected]
X-OriginalArrivalTime: 10 Sep 2014 12:22:07.0005 (UTC) FILETIME=[D63584D0:01CFCCF1]

I'm guessing that they're using something other than Exchange for the MTA's. I don't recall seeing this in the "Received:" headers ever since Exchange stopped using the MS Windows SMTP service:
Microsoft SMTPSVC(7.5.7601.22712)
--- Rich Matheisen MCSE&I, Exchange MVP

I am running Windows 7 Professional. When I try to install Flashplayer, I get to step 3, and then the installation will not proceed any further. A blank dialog box appears, with Adobe Flash Player Installer in the upper left corner. I have tried to ins

I am running Windows 7 Professional. When I try to install Flashplayer, I get to step 3, and then the installaion will not proceed any further. A blank dialog box appears, with Adobe Flash Player Installer in the upper left corner. I have tried to install on Explorer, Firefox, and Chrome. Nothing works. Please help.
Thanks/ Scott

1. Restart your computer to stop any Adobe process that is running.
2. Click on the following Adobe link. Go to the bottom where it says "Still having problems?". Click on the version of Flash Player for your browser.
Installation problems | Flash Player | Windows

Error in sql server with a trigger (I want to display a customize message, when the user left a blank field or null) How can I do?

How I display a customize message(with a trigger)when a user left a blank field? I want to the stop the insert statament if the user left the status field in blank. I create a trigger but now I can't enter a row, i used an instead trigger
too but doesn't work. I want to display a customize message when the user left the
status field in blank or null.
I have the following code:
CREATE TRIGGER [dbo].[BLANKFIELD]
ON [dbo].[Status]
FOR INSERT
AS
BEGIN
IF (SELECT COUNT(*) FROM inserted WHERE Status IS NULL) =1
PRINT 'Please Fill the Status field is required'
Rollback;
END

I agree with other comments that you should do this with specifying that the column is NOT NULL to prevent it from being NULL and a constraint if you don't want it to be blank (spaces or the empty string - note that the empty string is not the same thing
as NULL).
But for completeness, the reason your trigger does not ever allow you to enter a row is the code
IF (SELECT COUNT(*) FROM inserted WHERE Status IS NULL) =1
PRINT 'Please Fill the Status field is required'
Rollback;
Since you don't have a begin/end block after IF, the only conditionally executed statement is the one immediately following the IF (that is the PRINT). So the Rollback is always executed whether or not the IF is true and so all updates are rejected.
So if you were to do this in a trigger you could do something like the following
CREATE TRIGGER [dbo].[BLANKFIELD]
ON [dbo].[Status]
FOR INSERT
AS
BEGIN
IF EXISTS(SELECT * FROM inserted WHERE Status IS NULL)
BEGIN
PRINT 'Please Fill the Status field is required';
Rollback;
END
END
(As José noted, there can be more than one row in the inserted pseudo table, so you don't want to test whether the COUNT = 1, instead just whether one or more rows exist where the Status is null. If you want to prevent Status is NULL, or all
spaces, or the empty string, then your IF statement would be
IF EXISTS(SELECT * FROM inserted WHERE ISNULL(Status, '') = '')
Tom

Mail Merge script to replace any blank fields with specific text

In InDesign Mail Merge I would like to replace any blank fields with specific text. For example if we have four fields (A, B, C & D) to merge, and field A is blank, it would insert field C.
In essence leaving no blank fields but replacing a blank field with another specific field.
I have read that inDesign does have Mail Merge limitations but if there is a script that we could run that would solve our problem.
Please let me know if you can help?

I take from the lack of response it is not possible to do this in InDesign.

Photos are there but the videos are appearing as blank icons with an error message after the upgrade to Yosemite

I bought myself a new MacBook Pro and migrated everything from a Time Capsule/Time Machine migration. My previous computer was slowly dying so I had backed it up although it was running Mavericks. I migrated everything to the new computer from a Time Machine backup - all my photos and files are there - but in iPhoto, the videos (taken with a camera as .MOV files which usually appear in iPhoto) are appearing as blank icons. When I click on them, I get the error message, "The operation couldn’t be completed. (OSStatus error -54.)" and the video doesn't play or appear. The video does, however, appear when I click on "Reveal in Finder - Original File" - so the files are there - they just aren't being compatible with my iPhoto in Yosemite.
Any idea why?

Do you still have access to the old system? If so drag the iPHtoo library on the new system to the desktop and Connect the two Macs together (network, firewire target mode, etc) or use an external hard drive formatted Mac OS extended (journaled) and drag the iPhoto library intact as a single entity from the old Mac to the pictures folder of the new Mac - launch iPhoto on the new mac and it will open the library and convert it as needed and you will be ready move forward.
LN

Mail using smtp is going with to field blank

Hi,
I am sending a mail using utl_smtp .receipient is getting the mail.but problem is that he is getting it with blank 'to field'.
Following is the code i wrote.
CREATE OR REPLACE PROCEDURE mis_test_send_mail AS
pfrom VARCHAR2(100):='[email protected]';
crlf CONSTANT VARCHAR2(100):= CHR(13) || CHR(10);
message VARCHAR2(1000);
preceiver VARCHAR2(100):='[email protected]';
psubject VARCHAR2(100):='Test Mail';
mail_conn Utl_Smtp.connection;
mailhost CONSTANT VARCHAR2(50):='mailrelay.organization.com';
BEGIN
message:='How Are You'||crlf;
mail_conn:=Utl_Smtp.open_connection(mailhost);
utl_smtp.helo(mail_conn, mailhost);
utl_smtp.mail(mail_conn, pfrom);
utl_smtp.rcpt(mail_conn, preceiver);
utl_smtp.data(mail_conn, message);
utl_smtp.quit(mail_conn);
EXCEPTION WHEN OTHERS THEN
dbms_output.put_line('error :'||SQLERRM||''||SQLCODE);
END mis_test_send_mail ;
Any help on this is highly appreciated.
Regards,
Cheriyan

You need to include any headers that need to be shown in the mail in the message data. The headers section of the data needs to be separated from the body section by at least one blank line.
message:= 'From: "sender name" <[email protected]>' || crlf;
message:= message || 'To: "recipient" <[email protected]>' || crlf;
message:= message || 'Subject: this is only a test' ||crlf;
message:= message || crlf;
message:= message || 'How Are You' ||crlf;The utl_smtp.mail and utl_smtp.rcpt procedures just tell the recieving SMTP server who is sending it and who to deliver it to, but what the recipient sees is what's in the headers section of the utl_smtp.data payload.
You can take advantage of this in that you can include multiple calls to utl_smtp.rcpt, but not include them in the payload's header section. This is exactly what happens when you use your mail client to send blind carbon copies of an email.

Saving forms with interactive fields.

I am using Adobe Reader XI. I am filling out a form with interactive fields and the purple bar at the top which states "data typed into this form can be saved". However, when I save the form and then reopen it, the form is blank. Is there anything I can do to save the completed form?

Worked for me (Yahoooo! Have been asking for this for over a decade)
Opened .pdf with form field in reader X1
Type in a few numbers into form field
Did a save as, save was greyed out.
Closed file, reopened in reader X1
Closed file, reopened in Acrobat Pro X, flashed without form field or purple bar, then 3 seconds later falshed again and purple bar and form contents appeared, seems to have to think about whether to show or not

SAPScript Suppress/Control Amount field size

Hi Guys,
I have been working on a SAPScript form and I have an issue. Can I restrict the size of the amount field so that it appears with a certain number of digits before the decimal point? If so, how? The size of the amount field is causing part of the amount to be written to the next line, which I do not want to happen.
I also need a character field not to compress spaces. It seems this is what is happening if this field contains a smaller number of characters than the defined number e.g. &EKPO-TXZ01(17)& having max 17 characters. This causes the other numbers and so on in front to drag back wards. I do not want this to happen as well. Also, it seems it is also creating spaces (about 3) after each line and I have not defined any new lines in the form itself.
Please assist.
Thanks and Regards,
Darlington

Hi Guys,
Thanks for the quick response. The first issue I think can be resolved through the use of the solutions you suggested. For the second issue, I need to understand how the tabs would work as you suggested. For instance, &EKPO-EBELP& &EKPO-EMATN(10)& &EKPO-TXZ01(15)& &EKPO-TXZ01(17)& &RM06P-PRMG1& &T006A-MSEHT& ,,&EKPO-NETPR&&RM06P-PRPEI& &EKPO-NETWR& are all in one line and the element in question is &EKPO-TXZ01(15)&. The text 'test' is less than 15 characters and it seems it compresses the spaces such that the other elements (&RM06P-PRMG1&, &T006A-MSEHT&, etc.) are dragged leftwards towards it., but for characters exactly 15 characters long, the others do not move.
How would I apply the tabulators in this case?
Thanks

SAPSCRIPT appears with blank fields

Similar Messages

Maybe you are looking for