Satellite A - LAN card stopped working

I purchased my A series in April 08 and a few weeks ago the LAN card stopped working. It just won't connect and can't get emails and doesn't connect to any web pages.
Currently have the computer working off wireless but does anyone know how to fix the LAN Card problem.

Hi!
Which Satellite notebook do you have exactly?
Does the notebook recognize a LAN cable if you plug in it? Is the LAN connection enabled in Windows?
Try to update the LAN driver and the BIOS. Both you can find on the Toshiba website:
http://eu.computers.toshiba-europe.com => Support & Downloads => Download Drivers
Bye

Similar Messages

  • Satellite L550 - Flash Cards stopped working after Windows 7 64bit repair

    I tried installing/reinstalling/uninstalling and then installing again, Toshiba Value Added Package and flash cards support utility. No luck...
    Flash cards utility is installed: [https://dl.dropbox.com/u/3002908/Capture.PNG]
    What now? :)
    Laptop model: L550-15F (PSLN4E)
    Also, does anyone know why a search for drivers for my model returns bluetooth stack package but my model doesn't seem to have bluetooth? :)

    Hi
    Wait a moment, please! In which order you have installed/reinstalled the Value Added Package and Flash Cards Support Utility? It would be interesting to know what you have done exactly.
    I have used the following repair order for this problem:
    I uninstalled Flash Cards Support Utility and then Value Added Package. I did make a restart and cleaned the system by using CCleaner. One restart more and I installed Value Added Package firstly and then Flash Cards Support Utility. Now I did make the last restart and the FN keys started to work!
    Its important that you install the new versions for Windows 7!
    That means Flash Cards Support Utility version 1.63.0.4 and VAP version 1.2.34_64. I founded both on the Toshiba website :)

  • Satellite A210-1AP - video card stopped working playing Call Of Duty 4

    Hello,
    I am having problems with my video card.
    When I was playing call of duty 4 in 5 minutes my video card stops working and screen restart.
    Then it says Your video card stopped working, and problem solved.
    My video card is ATI Mobility Radeon HD 2600.

    > Then it says Your video card stopped working, and problem solved.
    And? Is it working now?
    Possibly the graphic driver hung and therefore you received this message.
    Its also possible that the GPU temperature was too high and therefore the message appeared.
    The COC 4 needs a lot of hardware resources and everything must run with full performance! Therefore there is higher heat dissipation and this can lead to graphic card issues.

  • Satellite A60 - sound has stopped working

    Satellite A60 - sound has stopped working. Downloaded new sound driver from toshiba web site - clicked on sound update icon and it worked, but disappeared every time I restarted.
    Clicked on installshield icon, and install starts, but then has an error message saying 0x80040303, unknown error, setup terminates - this happens every time.
    Tried to download other updates, but it says I didn't register my laptop, which I'm sure I did, and won't let me do it again because it's more than 6 months old.
    Help!!

    Hello
    Try to roll back the operating system to an earlier time when everything works fine. On this way it is not easy to say why this happen. Try also to remove sound card from device manager and restart the unit.
    All drivers for your unit you can find on Toshiba download page under http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  • When updating itunes from 10.0.1.22 to anything higher, my network card stops working, HELP!

    When updating itunes from 10.0.1.22 to anything higher, my network card stops working, HELP!
    I have an iPhone 3gs, and a work iPhone 4 on iOS 4.3.3.  I want to sych with iTunes but clearly must upgrade to >10.1
    When I do, my network card no longer works on my desktop.  Please HELP!
    My spec is;
    NETWORK CARD;

    polydorus wrote:
    This isn't my thing, but the following post on this seems to have helped some people:
    http://discussions.apple.com/thread.jspa?messageID=12622179#12622179
    That's the go-to advice with this one, p. (I certainly don't have much to offer beyond it, but it does a superb job in the vast majority of instances.)

  • 32g sd card stopped working ,is there an answer to correctig problem ?

    32g sd card stopped working , is there an answer to correcting problem ?

    take it out and put it back in
    reformat it
    have you tried it in a pc with card reader?
    buy a new card?

  • Sdhc cards stopped working with 10.9.1 update

    sdhc cards stopped working with 10.9.1 update. I've tried multiple readers with no affect. Any ideas?

    Have you checked for an update and/or asked the developer for help?

  • After Software Update 2007-004 airport card stopped working after wakeup

    Hi,
    I have a powerbook G4 - DVI running 10.3.9. After I have installed Software Update 2007-003, when my computer goes to sleep and then wakes up, airport card stops working. I had to open the back of the computer, unplug and plug the airport card, then it starts working again. But next time the computer goes to sleep, it stops working again.
    Does anyone have a similar problem? Any work arounds?
    Thanks in advance.
    Also following is the logs from Software Update. Looks suspicious:
    Mac OS X Version 10.3.9 (Build 7W98)
    2007-04-28 18:56:03 -0400
    2007-04-28 18:56:03.190 loginwindow[181] FSResolveAliasWithMountFlags returned err = -43
    WirelessScan timeout waiting for first scan result
    WirelessScan timeout waiting for first scan result

    Deleting AppleAirPort2.kext solved the problem for some...
    http://discussions.apple.com/thread.jspa?threadID=934370&tstart=0
    While others had to rollback the AppleAirPort.kext to version...
    http://discussions.apple.com/thread.jspa?messageID=4310165&#4310165
    Installing the Security update 1.0.1 from 5/01/2007 helped others. Reapplying the Combo Update again helped a couple of people.

  • 5233 Memory card stopped working!

    Hi,
    I've had this phone for almost a year, it's good but there have been few problems.
    I have an 8 GB memory card, which I had to reformat recently. Today I was downloaded a theme from nokia store. But suddenly my memory card stopped working. I re -inserted it but it doesn't show on phone.
    56 MB of my phone memory and 6.5 GB of my external memory is free. I cant reformat cause memory card is not showing on phone.
    Another problem that's appeared is that while typing, if move the cursor back it goes through each alphabet instead of each word.
    3rd thing is wen I first posted here there was an option that allowed me to check response via email. Its not here anymore.
    Please help all my data is on memory card.
    Regards
    Solved!
    Go to Solution.

    Hi mtank,
    Thanks for your post.
    If the memory card can't be read in the phone try your memory card in a cardreader connected to a PC to verify if the card is readable still. If it is copy all content to the PC and format the card. Then check the card in the phone and if it is accessible copy all content back to it from the PC. If you still can't read the card on the phone replace it with a new one. You can copy the original content to it from the PC first.
    Hope this helps,
    Kosh
    Press the 'Accept As Solution' icon if I have solved your problem, click on the Star Icon below if my advice has helped you!

  • My SIM card stopped working, is that an issue to address to my phone carrier or to apple?

    My SIM card stopped working, and I have no idea why. I've had my phone for four months... Who can I bring it to to get it fixed?

    Is there an error message? What is the exact wording of that message?
    Remove the sim, clean the contacts, reseat the sim.
    Go to your wireless provider and get a new sim.
    Make an appointment at your local Apple store to have the iPhone evaluated.
         http://www.apple.com/retail/geniusbar/

  • After Service, Airport card stops working randomly on macbook pro 17" early 2009

    Hi,
    So after the last time my computer was serviced, the airport card stops working randomly on moving the screen.
    Upons restarting the computer, it sometimes says wi-fi hardware not installed. Then, if I move my machine around,
    lift it up, turn it around, place it back on the table and restart it, it works again. I don't understand this.
    And all this started happening the moment my warranty ran out. Extremely frustrating!!

    It may be possible that one of the following may be the issue:
    The internal AirPort Extreme card is not seated properly.
    The internal Wi-Fi antenna connector is not seated properly in the AirPort Extreme card.
    The internal AirPort Extreme card's connector is faulty or damaged.
    The internal AirPort Extreme card is faulty.
    To get an idea on how the Extreme card is installed, please check out the following iFixit article.

  • I have a factory unlock iphone 5 with the lasted version. Since yesterday my sim card stopped working and now says `No Sim`, was working fine and stopped working now, other sim works but just not mine. ¿What can be happening?

    I have a factory unlock iphone 5 with the lasted version. Since yesterday my sim card stopped working and now says `No Sim`, was working fine and stopped working now, other sim works but just not mine. ¿What can be happening?

    I thought that, but I put the sim card in another device that is not Apple and works. Definitely the sim card work, but no longer in my iPhone 5 or maybe in any other Apple device, i dont know why!! But i gonna get a replacement to see what happen

  • Graphic card stops working, then recovers

    I recently installed the plug-in for Pixel Bender on CS5.
    When I open a jpg, and choose OilPaint, with the check box for GPU, as soon as I hit the OilPaint filter, my graphics card stops working, the screen goes black for a few seconds, then comes back on.  I get a message that the card stopped working, but recovered.
    I surmise this is a graphics card issue, or memory, or both?  I don't know for sure.
    I'm using an HP PC with 6 Gb RAM, and the card is a Nvidia GeForce 9500GT.  The drivers for this card are all up to date.
    CS5's performance settings are:  2 scratch discs (not the boot drive) with nearly a terabyte free space on one, and about 250 Gb on the other.  The program shows about 5.7 Gb of available RAM, and the preferred setting (maximum) is about 3.8 Gb.  I've got it at 3.7 Gb.
    When the card recovers, it takes several minutes before I can see the image in Photoshop again.  Then, when I try the filter again, I uncheck the GPU box, click on the OilPaint filter, and get a window that says the process timed out, and gives me 2 options:  try again or cancel.  After about 6 or 7 try-agains, the image will have the filter applied.  It takes another 5 or 6 tries to finish with "OK" and then the image shows up in the pane, in Photoshop.
    My computer has a 350W power supply, so the GeForce 9500 GT is the biggest card I can use in it.
    Is it a question of an inadequate graphics card?  Or, not enough RAM?
    I could install a new power supply for the PC, then get a different card, if that would solve the problem.  But, since I'm not sure if this is what I need to do, could I please have some suggestions on my issue with this whole thing?
    Thanks very much.
    Alan

    Thanks for those links.  I missed them, because I just had Windows search for updated drivers, and when I told it to search online, it said that the drivers were up to date.  So....well, I'm sorry I didn't check NVIDIA directly.  I appreciate your help in this.
    Anyway, I did install the updated drivers.  I rebooted the machine, just to make sure (I checked the properties of the card, and it showed the updated driver listed).
    I re-tried the OilPaint, and the card crashed, as before.  It gave me this message:
    "The NVIDIA OpenGL lost connection with the display driver and is unable to continue.  The application must close."  It then closed CS5 (Bridge remained open, though).
    It said there was an Error code: 8.
    Thanks again for assisting me on this.  What would be the next step to resolve this?
    Alan

  • LAN Adapter stopped working

    My laptop’s local area connection adapter (LAN) suddenly stopped working. The laptop is an HP Pavilion dv6t-6c00 CTO Entertainment Notebook using windows 7 home premium 64-bit operating system. The network LAN adapter is Realtek PcIe GBE Family Controller. By the way, the wireless adapters include (a) Intel (R) centrino (R) wirless-N 1030 (b) Cisco AnyConnect secure mobility (c) Microsoft virtual WiFi miniport. Wireless works just fine, but LAN suddenly stopped working.
    Concerning the LAN here is what I have tried: (1) The Ethernet cable works just fine for my other pc’s LAN and I switched Ethernet cables that also work for my other pc’s LAN. (2) Using cmd function for ipconfig/release and ipconfig/renew, I get the same messages as follows “… media disconnected…” (3) Using device manager I reviewed to make sure all the network adapters were working correctly and enabled. (4) Using device manager I uninstalled and reinstalled the network adapters. (5) I checked for updates for the network adapters and I’m using the most recent updates. (6) The diagnostic message I get when I test the LAN is, “an Ethernet cable is not connected or is broken” (7) I’ve rebooted the HP and router many times. (8) The router is fine, because wireless works on the HP Pavilion and the Ethernet cables work just fine on my other pc.
    By the way, I don’t believe the Ethernet port is fried because there was no burn smell. I think it is the adapter since I get media disconnected message. Any suggestions or recommendations on how to fix the LAN?

    @InfoSeach ,
    Hello and thank you for posting on the HP support forums.  
    You have covered all the steps that normally are taken when diagnosing a LAN issue.  Except one.
    Did you check the pins in the socket on your notebook?  Are they all straight?  Are any missing?
    If they are all in good shape the next thing is repair.  The size and location of the chips for the LAN adapter generally will not give off a burn smell unless they go through an over heat.  If one tiny relay or cap goes controlling voltage you wont get a smell.
    Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    Thank you again for posting and have a great day
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    D5GR
    I work on behalf of HP

  • WRT330N Lan ports stopped working!

    Randomly stopped working. tried a hard reset, tried flashing...the wireless works, but the 4 lan ports don't.
    Help?

    Have you tried to connect the Ethernet Cable Directly from the Modem to the Computer and check if your computer is able to go Online? If its still the same problem, then i think it might be the problem with the Ethernet Card of your Computer.
    If it works fine, then again you need to Hardwired your computer to the Router and on your Computer you need to change some settings ....
    These settings are for Windows XP OS : 
    Click on the Start button >>> Control Panel >> Network Connections >> Right click on the ""Local Area Connection"" icon and select properties-Here click on the "Configure" button- Click on the "Advanced" tab- In the "Property" box highlight Link speed and duplex/Connection type/Network or Media type- And in the "Value" box select 10 Mbps half duplex/ 10 base T/10 base half mode and click on OK.. 
    These settings are for Vista OS :
    Click on the Start button >>> Control Panel >> Network and Sharing center >>Left hand side under task Click on manage wireless network >> Right click on the ""Local Area Connection"" icon and select properties-Here click on the "Configure" button- Click on the "Advanced" tab- In the "Property" box highlight Link speed and duplex/Connection type/Network or Media type- And in the "Value" box select 10 Mbps half duplex/ 10 base T/10 base half mode and click on OK..
    Once you are done with these settings, when if it still shows you Cable is Unpluged or its Connected. 

Maybe you are looking for

  • External USB 2.0 Hard drive not showing up

    I have a 120gb Western Digital external 2.0 USB hard drive. When I plug the drive in (have tried both speeds of USB) nothing shows up. The drive powers up and spins. The first time I plugged it into the computer it ran perfectly. 5 minutes later afte

  • Adobe Help required:subtotal of amount per page in Adobe forms

    Hello everyone, I have the following requirement: If i have 12 items in my i_item table: Page 1 --> 8 items fit                 calculate and display subtotal of field amount(WRBTR) of the 8 items at end of page 1 Page 2 --> remaining 4items fit     

  • Extranal contex mapping in web dynpro java 7.0

    hi, how to declare the usage of other webdynpro DC,how to pass data between the two DCs and Difference between External Context mapping and Normal mapping with working example.can any one send pdf G.srinu

  • Alpha channel in Adobe Media Encoder output

    Hello, I would like to know how to get the same result in Adobe Media Encoder as you get from AE rendering using Quicktime container and PNG + alpha codec. On the left is the SS from playing AME rendered video in any player, even Win preview, on the

  • IPad Full Screen Video Encode Settings

    This seems like such a basic question but I can't seem to find it. I want to transcode a video to play in 1024x768, which is the dimension of the iPad. However one of the presets in AME (CS6) for either Apple or iPad have this setting. What are peopl