Satellite A205-S4607 doesn't start after windows vista update

Hello,
I was installing windows vista updates, but the battery was low and the computer turned off, then, the computer doesn´t start, only the hard disc led is light but the screen is black, please can you help me?
The model is Satellite A205 -S4607

Thanks for your advice, but the problem is very complicate, the computer doesn't boot up, only the led te HD is ligthing, I removed the HD and the memory but doesn't work, I've read that the problem could be the bios, and the recomendation is remove the battery of the board to reset the bios, but I think it is very dangerous.
Message was edited by: Nvillegas

Similar Messages

Master Collection fails to start after Windows Vista update

Last night, Automatic Update patched my machine and restarted. This morning, I find that all my CS3 apps (from Master Collection) will not start. Every app presents me with the "Adobe ________ .exe has stopped working." Has anyone else experienced this? Thanks!
Vista Ultimate x64
Intel Core2 Duo 2.66GHz
8GB RAM
Angry
-Andrew

Hi all, just ran into the same issue after Service Pack 1 for Vista. Here's the solution:
If you are getting a message about the BRS pencil tool when launching Illustrator and you are using Windows Vista or XP, you may be missing an important font.
For Vista users you are missing the Segoe-UI font. For XP users
you are missing the Tahoma font. These fonts need to be installed on
your system in order for Illustrator, Flash, Photoshop and InDesign to
launch. Most of the other applications will give you a generic
"application has stopped working" error when trying to launch.
Also,another clue is located inside the Event Viewer. For vista users, click on your start button and in the search area type "event", the event viewer will show in the results area, click on it and then click on "windows logs", then click on "application". For XP users, click Start, then Run and type "eventvwr" and hit enter, then click on
"Application". By double-clicking on an error you will see the
description for the problem. If the faulting module shows AdobeOwl.dll, you are most likely missing the font. You can do a google search for the font and they are available for download.
So far I have not found a solution for a mac. The documents referencing these errors are kb402311 and 331889

T61 no sound after Windows (Vista) update (?)

I have purchased a T61 in December 2007. The sound has always been low and now i have no sound at all. I cannot hear files locally or on the Net -- or any of the computer sounds.
i realize now that it has happened after a Windows (Vista) update. I have done every step but 6.
I have Speakers (SoundMax Integrated Digital HD Audio). The sound keeps defaulting to to Line 2 Muv Enum (Virtual Cable).
http://support.microsoft.com/kb/948481
>> Update -- perhaps this will help someone else. After doing steps 1-5 (at support link), I redid step #3 and now it's working.
Message Edited by Suntea on 06-27-2008 12:50 PM

I have purchased a T61 in December 2007. The sound has always been low and now i have no sound at all. I cannot hear files locally or on the Net -- or any of the computer sounds.
i realize now that it has happened after a Windows (Vista) update. I have done every step but 6.
I have Speakers (SoundMax Integrated Digital HD Audio). The sound keeps defaulting to to Line 2 Muv Enum (Virtual Cable).
http://support.microsoft.com/kb/948481
>> Update -- perhaps this will help someone else. After doing steps 1-5 (at support link), I redid step #3 and now it's working.
Message Edited by Suntea on 06-27-2008 12:50 PM

Vaio SVT13134CXS doesn't start after windows 10 upgrade

Hi, I've upgraded my laptop from win 8.1 to 10 and at boot stage the mouse cursor and loader icon are showed. i've seen that is not recommended do the update yet, but it's too late . Anyone know how can I make my laptop usabe again? I'm very grateful with any help. cheers

Hi ebordon,
Thank you for considering Sony Community!
I am sorry to hear your issue but let's try to isolate this. Hopefully will be able to boot your unit to Windows. Since this is a U.S. model, these steps are applicable to your unit.
Remove all peripherals -> look for a battery off button or pinhole on the bottom of the laptop -> push the button for 5 seconds.
Reset BIOS.
Safe Mode.
If you're planning to roll back to the previous operating system, please visit this page: How to go back to a previous version of Windows after Windows 10 has been installed.
For other concern and for further assistance, we kindly recommend visiting our Sony Global Web site for information on contacting the Sony Support Center in your region at http://www.sony.net/SonyInfo/Support/.
Hope these help.
Regards,
Vincent
If my post answers your question, please mark it as "Accept as Solution"

Laptop does not start after windows 8 update

hi every one
2 days ago my hp-15 notebook got 2 windows 8 updates. The 2nd one failed and after 1 hr i removed the battery to put it out of it's misery.
now, when i push the start button only the wifi-lichts go on for about 30 sec and then the system shuts down.
everything i tried has failed.
what to do next???

Hi @lisa55 ,
Welcome to the HP Forums!
I would like to take a moment and thank you for using the forum, it is a great place to find answers. For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that you got 2 Windows updates, during the installation of the second one the computer froze. After 1 hour you removed the battery and reinstalled it.
Now when you try to power it on you get a blank or black screen with no error messages. The wireless light is lit for about 30 seconds before it powers itself down.
There has been some Windows updates that have been causing an issue.
Would you boot into Safe Mode and uninstall these updates.
KB2982791, KB2970228, KB2975719 and KB2975331.
The other one that is suspected of causing this issue is the "Search Protect" software.
If you check under programs and it is listed, please uninstall it.
Windows 8 Safe Mode
See which Windows updates are installed
If you would like further assistance, please provide your exact model of HP 15 notebook you have.
How Do I Find My Model Number or Product Number?
Good Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Satellite A210 touchpad scrolling disabled after Windows Vista update

Last week I accepted a Microsoft Windows update. Sine that update I can not get the Satellite to recognise its touchpad and the only driver updates that work are for a standard PS2 mouse. I can no longer use the bottom and side scroll features of the Toshiba touchpad. What drive am I looking for to rstore the touchpad please?

You can find the Touchpad driver here: http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp
Firstly remove the driver from Control Panel -> Programs and Features
Then download and install the latest version.
If you have Logitech mouse drivers or other 3rdparty mouse/keybiard drivers installed, remove those as well.

Cisco VPN Client after Windows Vista Update (KB941229)

I had the Cisco VPN client 5 installed on my laptop and configured by the IT department at work. It was working fine all day until I restarted and KB941229 was automatically installed. When it turned back on the Cisco VPN service (CVPND) would attempt to run then stop. If I started it manually it would run for about a minute then stop again. Without the service running the VPN client won't open, let alone let me connect.
I know this vista update is fairly recent so I'm not sure there will be a fix but maybe somebody can think of a workaround or some way to fix this situation.
Things I've tried:
1) Uninstalling the windows update
2) restarting
3) restarting (in denial that this was happening)
4) configuring a vista VPN connection to attempt to connect to the company VPN (this failed too)
Uninstalling the update caused me to be unable to ping for some reason. This meant the VPN client would run but be unable to connect to the server and yet I was entirely able to access the internet locally. I reinstalled the update assuming maybe the installation went badly but that caused the same problem with the VPN service stopping itself (or being stopped) after a minute.

Hello
my issue has been resolved.
there is a service called Base Filtering Services running in background for Vista and has to disabled to make IP Sec VPN Client working.
after doing so it works smoothly.
- Dhaval Tandel

Satellite P300 - Microphone doesn't work after Windows 7 installation

Hi,
I recently did a clean install of Windows 7 on my Satellite P300. The built in microphone was fine with Vista but does not now work with Windows 7.
I've tried going to the sound section and it does not list the built in mike - just the jacks. Can anyone help?
Thanks
James

Hi
Maybe you didnt install the driver for the microphone?! Therefore you have to install the webcam driver because the microphone is a part of it. You can get it here:
http://eu.computers.toshiba-europe.com => Support & Downloads => Download Drivers
After this it should be possible to use the internal microphone.
By the way: Which application you use for the internal microphone? Skype or something else?

Satellite L10-104 doesn't start after battery totally empty

Hi,
after I left the laptop over the weekend without the AC charger the battery was totally empty. So I reconnected it to charge the battery for one day.
Now, when I press the power on button the green LED on the front illuminates for approx 3 seconds - nothing else happens. No HDD sounds, no coooling fan noise, nothing on the screen.
Does anyone have some ideas what I could do to make it run again?
Thanks,
Christian

Hi,
I took out the battery for one day, put everything together and tried to start up - nothing.
Then I took out RAM, HDD and some other module that's accessible from underneath and put the power cord in, tried to start - nothing.
I even disassembled the whole notebook and hooked up only the motherboard with the power line (of course CPU, GPU and cooling fan were still attached) - still nothing. Only the green LED in the front lights up for 3 seconds.
My guess is - its time has finally come. However I never expected that after a complete discharge of the battery.
Thanks for your help. I'd appreciate if you have any other ideas and since the notebook is 5 years old I guess I will not take it to a service technician.

Adobe Reader doesn't work after windows 7 update

Hello,
My Adobe Reader X was working fine, until one night where Windows 7 automatically updated, and after that Adobe Reader doesn't work anymore. It doesn't respond AT ALL when I click on it, and I cannot view PDF files anymore.
I uninstalled it, and re-installed it --- still doesn't work. I tried downloading version 9, but still it doesn't work.
I also tried to do system restore, but somehow it won't let me --- it says it failed to do so.
When I try to open PDF files in IE 10, it says "There is a problem with Adobe Acrobat/Reader..." and an error code of 103:103.
Could anyone help me?
Thanks!

You can try running cleaner on your machine
http://labs.adobe.com/downloads/acrobatcleaner.html
and then again install latest Reader from
http://get.adobe.com/reader/enterprise/

Entrance doesn't start after today's update

Entrance begins but seems locked with the cross at the center of the screen.
I found in daemon.log:
1605 is the pid, but I couldn't write to /var/run/entrance/entranced.pid
When I start in a console and try to start with a /usr/sbin/entranced, it display the following error:
ERR:Ecore ecore_config_ipc_main.c:266 _ecore_config_ipc_init() _ecore_config_ipc_init: registered "_system"...
ERR:Ecore ecore_config_ipc_main.c:266 _ecore_config_ipc_init() _ecore_config_ipc_init: registered "entrance"...
ERR:Ecore ecore_config_storage.c:87 ecore_config_file_load() Cannot open database from file /home/jd/.e/config.eet!
ERR:Ecore ecore_config_storage.c:87 ecore_config_file_load() Cannot open database from file /usr/share/ecore/system.eet!
Upgraded packages:
[2010-02-01 10:29] upgraded libpng (1.2.40-1 -> 1.4.0-2)
[2010-02-01 10:29] upgraded cairo (1.8.8-1 -> 1.8.8-2)
[2010-02-01 10:29] upgraded eina-svn (44898-1 -> 45668-1)
[2010-02-01 10:29] upgraded libjpeg (7-1 -> 8-1)
[2010-02-01 10:29] upgraded eet-svn (44906-1 -> 45443-1)
[2010-02-01 10:29] upgraded libtiff (3.9.2-1 -> 3.9.2-2)
[2010-02-01 10:29] upgraded libcups (1.4.2-2 -> 1.4.2-3)
[2010-02-01 10:29] upgraded gtk2 (2.18.5-1 -> 2.18.6-1)
[2010-02-01 10:29] upgraded librsvg (2.26.0-1 -> 2.26.0-2)
[2010-02-01 10:29] upgraded evas-svn (44940-1 -> 45623-1)
[2010-02-01 10:29] upgraded ecore-svn (44945-1 -> 45703-1)
[2010-02-01 10:29] upgraded e_dbus-svn (44846-1 -> 45652-1)
[2010-02-01 10:29] upgraded embryo-svn (44547-1 -> 45428-1)
[2010-02-01 10:29] upgraded edje-svn (44912-1 -> 45672-1)
[2010-02-01 10:29] upgraded efreet-svn (44905-1 -> 45532-1)
[2010-02-01 10:29] upgraded e-svn (44948-1 -> 45691-1)
[2010-02-01 10:29] upgraded e-modules-extra-svn (44918-1 -> 45590-1)
[2010-02-01 10:29] upgraded entrance-svn (44929-1 -> 45539-1)
[2010-02-01 10:29] upgraded imlib2 (1.4.2-3 -> 1.4.2-6)
[2010-02-01 10:30] upgraded ffmpeg (20100108-2 -> 20100108-3)
[2010-02-01 10:30] upgraded ffmpegthumbnailer (2.0.0-2 -> 2.0.0-3)
[2010-02-01 10:30] upgraded file (5.04-1 -> 5.04-2)
[2010-02-01 10:30] upgraded xulrunner (1.9.1.7-1 -> 1.9.2-2)
[2010-02-01 10:31] upgraded firefox (3.5.7-1 -> 3.6-2)
[2010-02-01 10:31] upgraded fltk (1.1.9-2 -> 1.1.9-3)
[2010-02-01 10:31] upgraded gd (2.0.36RC1-1 -> 2.0.36RC1-3)
[2010-02-01 10:31] upgraded gegl (0.1.0-1 -> 0.1.0-2)
[2010-02-01 10:31] upgraded jasper (1.900.1-3 -> 1.900.1-4)
[2010-02-01 10:31] upgraded ghostscript (8.70-3 -> 8.70-4)
[2010-02-01 10:31] upgraded lcms (1.18-2 -> 1.18-3)
[2010-02-01 10:31] upgraded libmng (1.0.10-2 -> 1.0.10-3)
[2010-02-01 10:31] upgraded libx11 (1.3.2-1 -> 1.3.3-1)
[2010-02-01 10:31] upgraded libwmf (0.2.8.4-5 -> 0.2.8.4-7)
[2010-02-01 10:31] upgraded gimp (2.6.8-1 -> 2.6.8-2)
[2010-02-01 10:31] upgraded glib2 (2.22.3-1 -> 2.22.4-1)
[2010-02-01 10:31] upgraded gnome-python-extras (2.25.3-4 -> 2.25.3-5)
[2010-02-01 10:31] upgraded imagemagick (6.5.8.5-1 -> 6.5.9.0-2)
[2010-02-01 10:31] upgraded initscripts (2009.08-1 -> 2010.01-1)
[2010-02-01 10:31] upgraded kernel26-firmware (2.6.32.6-1 -> 2.6.32.7-1)
[2010-02-01 10:32] >>> Updating module dependencies. Please wait ...
[2010-02-01 10:33] >>> MKINITCPIO SETUP
[2010-02-01 10:33] >>> ----------------
[2010-02-01 10:33] >>> If you use LVM2, Encrypted root or software RAID,
[2010-02-01 10:33] >>> Ensure you enable support in /etc/mkinitcpio.conf .
[2010-02-01 10:33] >>> More information about mkinitcpio setup can be found here:
[2010-02-01 10:33] >>> http://wiki.archlinux.org/index.php/Mkinitcpio
[2010-02-01 10:33]
[2010-02-01 10:33] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2010-02-01 10:33] ==> Building image "default"
[2010-02-01 10:33] ==> Running command: /sbin/mkinitcpio -k 2.6.32-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26.img
[2010-02-01 10:33] :: Begin build
[2010-02-01 10:33] :: Parsing hook [base]
[2010-02-01 10:34] :: Parsing hook [udev]
[2010-02-01 10:34] :: Parsing hook [pata]
[2010-02-01 10:34] :: Parsing hook [scsi]
[2010-02-01 10:35] :: Parsing hook [sata]
[2010-02-01 10:35] :: Parsing hook [usb]
[2010-02-01 10:35] :: Parsing hook [filesystems]
[2010-02-01 10:36] :: Generating module dependencies
[2010-02-01 10:36] :: Generating image '/boot/kernel26.img'...SUCCESS
[2010-02-01 10:36] ==> SUCCESS
[2010-02-01 10:36] ==> Building image "fallback"
[2010-02-01 10:36] ==> Running command: /sbin/mkinitcpio -k 2.6.32-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26-fallback.img -S autodetect
[2010-02-01 10:36] :: Begin build
[2010-02-01 10:36] :: Parsing hook [base]
[2010-02-01 10:36] :: Parsing hook [udev]
[2010-02-01 10:36] :: Parsing hook [pata]
[2010-02-01 10:37] :: Parsing hook [scsi]
[2010-02-01 10:38] :: Parsing hook [sata]
[2010-02-01 10:38] :: Parsing hook [usb]
[2010-02-01 10:38] :: Parsing hook [filesystems]
[2010-02-01 10:39] :: Generating module dependencies
[2010-02-01 10:39] :: Generating image '/boot/kernel26-fallback.img'...SUCCESS
[2010-02-01 10:39] ==> SUCCESS
[2010-02-01 10:39] upgraded kernel26 (2.6.32.6-1 -> 2.6.32.7-1)
[2010-02-01 10:39] upgraded libdrm (2.4.17-2 -> 2.4.17-3)
[2010-02-01 10:39] upgraded libgphoto2 (2.4.7-1 -> 2.4.7-2)
[2010-02-01 10:39] upgraded libtasn1 (2.2-1 -> 2.4-1)
[2010-02-01 10:39] upgraded libthai (0.1.12-1 -> 0.1.13-1)
[2010-02-01 10:39] upgraded libwebkit (1.1.15.4-2 -> 1.1.15.4-3)
[2010-02-01 10:39] upgraded live-media (2010.01.13-1 -> 2010.01.22-1)
[2010-02-01 10:39] upgraded mplayer (30325-1 -> 30325-2)
[2010-02-01 10:39] upgraded netpbm (10.35.841-1 -> 10.35.841-2)
[2010-02-01 10:40] when you use a non-reparenting window manager
[2010-02-01 10:40] set _JAVA_AWT_WM_NONREPARENTING=1 in
[2010-02-01 10:40] /etc/profile.d/openjdk6.sh
[2010-02-01 10:40] upgraded openjdk6 (1.6.2-1 -> 6.b17_1.7-1)
[2010-02-01 10:40] upgraded redland (1.0.10-1 -> 1.0.10-2)
[2010-02-01 10:42] * relogin or source /etc/profile.d/openoffice.sh
[2010-02-01 10:42] * see http://wiki.archlinux.org/index.php/Openoffice
[2010-02-01 10:42] how to use extensions, e.g. for spell checking
[2010-02-01 10:42] see /usr/lib/openoffice/share/extension/install what
[2010-02-01 10:42] is shipped with this package
[2010-02-01 10:42] * make sure you have installed a ttf font (ttf-dejavu recommended)
[2010-02-01 10:42] upgraded openoffice-base (3.1.1-2 -> 3.1.1-3)
[2010-02-01 10:42] upgraded pciutils (3.1.5-1 -> 3.1.6-1)
[2010-02-01 10:42] upgraded pm-utils (1.2.6.1-3 -> 1.2.6.1-4)
[2010-02-01 10:42] upgraded polkit (0.95-1 -> 0.96-1)
[2010-02-01 10:42] upgraded poppler (0.12.2-1 -> 0.12.3-1)
[2010-02-01 10:42] upgraded poppler-glib (0.12.2-1 -> 0.12.3-1)
[2010-02-01 10:42] upgraded pycairo (1.8.6-1 -> 1.8.8-1)
[2010-02-01 10:43] upgraded qt (4.5.3-3 -> 4.5.3-4)
[2010-02-01 10:43] upgraded rrdtool (1.4.2-1 -> 1.4.2-2)
[2010-02-01 10:43] update desktop mime database...
[2010-02-01 10:43] upgraded scribus (1.3.5.1-1 -> 1.3.5.1-2)
[2010-02-01 10:43] upgraded sdl_image (1.2.10-1 -> 1.2.10-2)
[2010-02-01 10:43] upgraded smplayer (0.6.8-1 -> 0.6.8-2)
[2010-02-01 10:44] upgraded stellarium (0.10.2-3 -> 0.10.2-4)
[2010-02-01 10:45] upgraded texlive-bin (2009.5-1 -> 2009.5-2)
[2010-02-01 10:45] upgraded thunar (1.0.1-4 -> 1.0.1-5)
[2010-02-01 10:45] upgraded zvbi (0.2.33-1 -> 0.2.33-2)
[2010-02-01 10:45] upgraded vlc (1.0.4-3 -> 1.0.5-1)
[2010-02-01 10:45] upgraded wxgtk (2.8.10.1-5 -> 2.8.10.1-6)
[2010-02-01 10:46] upgraded xfce4-notifyd (0.1.0-1 -> 0.1.0-2)
[2010-02-01 10:46] upgraded xkeyboard-config (1.6-1 -> 1.8-1)
[2010-02-01 10:46] upgraded xorg-apps (7.5-2 -> 7.5-3)
[2010-02-01 10:46] upgraded xorg-server (1.7.3.902-1 -> 1.7.4.901-1)
[2010-02-01 10:46] upgraded xscreensaver (5.10-2 -> 5.10-3)
I have to add that I am almost a newbie in Archlinux and that my english is very poor. Sorry && !
Last edited by jdn06 (2010-02-02 15:00:20)

I was offline on holidays for a few days.
Back home, I tried to update and saw a new version of entrance. I tried it and the problem is not the same, but it didn't work better.
I can write my login and pass and choose my session, it starts... and comes back to login. I tried by using xinittab or by adding entranced in rc.conf; same result.
Here is the log:
Feb 21 18:56:02 eeePapillon entranced: Starting X server.
Feb 21 18:56:03 eeePapillon acpid: client connected from 1504[0:0]
Feb 21 18:56:03 eeePapillon acpid: 1 client rule loaded
Feb 21 18:56:03 eeePapillon kernel: [drm] DAC-6: set mode 640x480 0
Feb 21 18:56:03 eeePapillon kernel: [drm] DAC-6: set mode 640x480 0
Feb 21 18:56:03 eeePapillon kernel: [drm] TV-12: set mode NTSC 480i 0
Feb 21 18:56:03 eeePapillon kernel: [drm] TV-12: set mode NTSC 480i 0
Feb 21 18:56:03 eeePapillon kernel: [drm] DAC-6: set mode 640x480 0
Feb 21 18:56:03 eeePapillon kernel: [drm] DAC-6: set mode 640x480 0
Feb 21 18:56:04 eeePapillon kernel: [drm] TV-12: set mode NTSC 480i 0
Feb 21 18:56:04 eeePapillon kernel: [drm] TV-12: set mode NTSC 480i 0
Feb 21 18:56:04 eeePapillon entranced: Starting Entrance.
Feb 21 18:56:05 eeePapillon entrance: Debug: ipc_title = /var/run/entrance/entrance_ipc_1501
Feb 21 18:56:05 eeePapillon entrance: entrance_ipc_init: Success
Feb 21 18:56:05 eeePapillon dhcpcd: eth0: leased 192.168.1.100 for 86400 seconds
Feb 21 18:56:05 eeePapillon dhcpcd: forking to background
Feb 21 18:56:05 eeePapillon entrance: Executing Init script.
Feb 21 18:56:15 eeePapillon entrance: PAM: Succès.
Feb 21 18:56:16 eeePapillon entrance: entranced: Requesting auth for uid 1000 (/home/jd)
Feb 21 18:56:16 eeePapillon entrance: _entrance_ipc_server_data = E_XAUTH_ACK
Feb 21 18:56:16 eeePapillon entrance: Executing /etc/X11/Xsession /usr/bin/ck-launch-session /usr/bin/enlightenment_start
Feb 21 18:56:16 eeePapillon entrance: Starting session for user "jd".
Feb 21 18:56:16 eeePapillon entrance: Opened PAM session. jd : :0.
Feb 21 18:56:16 eeePapillon entrance: DEBUG1
Feb 21 18:56:16 eeePapillon entrance: DEBUG2
Feb 21 18:56:16 eeePapillon entrance: DEBUG3
Feb 21 18:56:16 eeePapillon entrance: DEBUG4
Feb 21 18:56:16 eeePapillon entrance: DEBUG5
Feb 21 18:56:16 eeePapillon entrance: DEBUG6
Feb 21 18:56:16 eeePapillon entrance: DEBUG7
Feb 21 18:56:16 eeePapillon entrance: DEBUG8
Feb 21 18:56:16 eeePapillon entrance: entrance_ipc_shutdown: Success
Feb 21 18:56:16 eeePapillon entrance: DEBUG9
Feb 21 18:56:16 eeePapillon entrance: Replacing Entrance with simple login program to wait for session end.
Feb 21 18:56:16 eeePapillon entrance: Executing PreSession script.
Feb 21 18:56:16 eeePapillon entrance: Exec entrance login replacement: /usr/lib/entrance/entrance_login 1533 jd :0
Feb 21 18:56:16 eeePapillon entrance_login[1509]: Wait for jd on :0
Feb 21 18:56:16 eeePapillon acpid: client 1504[0:0] has disconnected
Feb 21 18:56:16 eeePapillon acpid: client connected from 1504[0:0]
Feb 21 18:56:16 eeePapillon acpid: 1 client rule loaded
Feb 21 18:56:16 eeePapillon entrance_login[1509]: Wait for pid 1533
Feb 21 18:56:16 eeePapillon entrance_login[1509]: Ending PAM session for user "jd".
Feb 21 18:56:16 eeePapillon entrance_login[1509]: Executing PostSession script.
Feb 21 18:56:16 eeePapillon entrance_login[1509]: child (pid=1533, user=jd, display=:0) exited with error: 127
Feb 21 18:56:16 eeePapillon entranced: session exit: code=0, signal=0
Feb 21 18:56:16 eeePapillon entranced: The session has ended normally.
Feb 21 18:56:16 eeePapillon acpid: client 1504[0:0] has disconnected
Feb 21 18:56:16 eeePapillon acpid: client connected from 1504[0:0]
Feb 21 18:56:16 eeePapillon acpid: 1 client rule loaded
The directory /var/run/entrance/ is empty after reboot; I don't know what is this /var/run/entrance/entrance_ipc_1501 file.
Has anyone an idea about this new variant of the entrance problem?
@FarmerF
Thank you for your advice; I did it and it worked, but I had naturally to remake all my personal adjustments of the racks.
Last edited by jdn06 (2010-02-21 18:46:03)

Satellite P300 (PSPCCA-03W01Y) - No microphone after Windows 7 update

Hi,
After updating my P300 to Windows 7 (32-bit) my in-built microphone has not worked. I understand that the microphone is part of the camera, but I cannot find the driver for Windows 7 32-bit to update it with. The camera is working fine.
There have been similar threads that direct you to download the driver, but after looking at the Toshiba Australia and the toshiba-europe sites, I have not been able to find it.
Does anyone know where I can find this driver?
Thanks.

Hi stelth_turtle,
You can try the Vista 32bit driver from Toshiba Australian page. Usually this driver also work on Windows 7 because Vista and Windows 7 are very similar so it would be worth a try and install the Vista 32bit driver.
If it doesnt work have a look for Satellite P500 drivers. On Australian page I saw a Windows 7 32bit driver for this model and I assume it should also work on your P300.
Check this!!!

Tiger doesn't start after last Software Update

Hi,
this morning I ran the new Update for Tiger and since then the system doesn't restart. Instead it keeps hanging on the grey start-up screen for hours.
What can I do?
Regards,
Nils

Use Disk Utility to verify/Repair the HD, then Repair Permissions then reboot, if the problems persist try reinstalling the update...
But don't use Software Update to get it, use this...
http://www.apple.com/support/downloads/

Aperture doesn't start after Mountain Lion update

Hi,
I've been using Aperture 3 for a while without problems. It's the version that came out last before Aperture went into the app store (and the price was reduced). All updates have been installed since then without any problems. Today I got my new MacBook Pro Retina and transfered all programs from my old 2010 MacBook. I also upgraded to Mountain Lion (10.8).
Since than, I can not open Aperture anymore. I am even unable to reinstalled it from DVD after deletion.
Any ideas?
Thx in advance,
Rasabo

I am even unable to reinstalled it from DVD after deletion.
I just reinstalled from the DVD. What is the error message that you get when you try?
Two things:
The installer on the DVD may give a warning that it needs to relaunch. Allow this by pressing "o.k."
Or you may get the message: "check with the developer to make sure Aperture works with this version of Mac OS X". This may be caused by an expired developer certificate. In this case, reset the Date in the system preferences to the first of February, before you run the installer.
Later you can set it back.
Regards
Léonie

Acer R7 keyboard doesn't work after windows 10 update

I really hate this ... tried many things still no luckSo I have to plug in my super old usb keyboard and voila it works just fine Is there a driver for R7 keyboard? Or should I clean install windows 10?But how ... usb thumbdrive? burn win 10 iso? Please help

Never in my life i have problem with keyboard like this .... it's annoying
My notebook is Aspire R7 571G and SNID: [edited to comply with guidelines]
When I checked on the win10 drivers, there was nothing there but wireless card driver .... i think
Should i install windows 8.1 driver while running windows 10 just to make the keyboard works?
is there any driver specifically for windows 10?

Satellite A205-S4607 doesn't start after windows vista update

Similar Messages

Maybe you are looking for