Satellite A205-S5843: Unknown WLAN card & some buttons don't work

OK one problem im probably get laughed at the other not
First problem.
I have no idea what a network adapter is.
My first thought is wireless internet because it says it has a wireless card in it but i can only connect to a network and nothing else even in my apartment that has wireless i can only connect to the network...plz help the noob!
Next problem.
Some of my keys will not work... nothing has been spilled on it for i refuse to let any liquid near it for fear of death..
The keys that don't work are the Z, R, Y, the arrow keys, the FN button, and the /? button.
It used to work and now it doesn't one site suggested that i hold the FN key and press the f11 button.
I did and it would work for 5 min or so and then nothing...now the FN don't work and im so confused and angry...this is my college laptop and it really hurts when i have to use the mouse to click the on screen keyboard all the time...plz help

Hi
The A205-S5843 belongs to the US series.
I checked the hardware specifications on the Toshiba US page and it looks like this notebook has been equipped with the Atheros 802.11 b/g wireless-LAN card.
The Atheros Wlan driver can be downloaded from the Toshiba US driver page or from this Toshiba European WLan portal:
http://aps2.toshiba-tro.de/wlan/
Regarding your keyboard/button issue.
Did you ensure that this is not a software problem?
I mean did you test if the notebooks keyboard/buttons would work using the original preinstalled Toshiba OS image?
In my personal opinion this strange keyboard behavior looks more like more hardware issue as software issue but its worth to check if the new installation would solve your problem
But if you will not notice any improvements then the keyboard should be checked by an authorized service partner.

Similar Messages

Clean Install of Windows 8 & Some buttons Don't Work

I bought this PC with dead Hard Drive. I installed new Drive and Windows 8 from USB.It only installed as 32bit OS and I know it should have been 64bit. Has 4Gb memory installed.Property screen shows: 4.00GB (2.97GB usable)(32bit OS, x64 Processor). Some of my buttons Don't Work nor does my Microphone. I have tried verifying all drivers but none fix buttons. No errors listed in Device Manager. Any help is Appreciated.

Wow that is so a "Canned" response. Can't install Windows7 on a system that never had 7. This unit was made originally for Vista. And even those do not have drivers I could use. Now if there were device manufacturer information you could give me about my unit then maybe I can get the buttons to work. The most important is the Microphone and Volume/mute buttons that need to work then you could help me.The Dell site will give you an exact biuld list when serial or Tag number is provided which help Identify device manufacturer so user can goto their site to get generic drivers to work with their Dell PC regardless of what version of OS is currently installed.So if you can really help here is the PC Info»HP TouchSmart IQ524 Desktop PC
Serial Number: 3CR9240GJN
Product Number: NC701AA

Re: Satellite A200-1ZF Win XP & Toshiba Control buttons don't work

Hi,
I have a Satellite A200-1ZF with Vista installed originally.
I removed Vista and install XP. And then installed all drivers and almost everything is working but those keys (power,www,mediaplayer,play,stop,back,next) on the upside of notebook don't work. :/
Only power work properly ...sometimes www and mediaplayer, but rest of it doesn,t work at all.
I have Windows Media Player 9 series. I don't know if it is problem with my drivers or windows media version or something else..
please help..

Hi
Satellite A200-1ZF belongs to the PSAE6E series.
Choose this series in the Toshiba European driver download form.
There you will find a XP BIOS. If you are using Win XP on this notebook then you have to update the BIOS to the XP version!
Furthermore you have to install the Toshiba Controls v. 2.48.2.2C.
This tool is needed to get the Toshiba Media buttons working!
Bye

Touch sensitive multimedia buttons don't work ! (Toshiba Satellite M645-S4050)

I've Toshiba Satellite M645-S4050. My multimedia touch buttons don't work except Vol+ and Vol-. All of them are making sounds when I touched but no action! 1) I uninstalled Toshiba Value Added Package (TVAP), 2) rebooted the machine, 3) installed TVAP then 4) rebooted again. But nothing's changed. 5) I reinstalled all Toshiba Utilities includes Assist and Flash Cards but same result. Also 6) I unplugged the battery and AC adapter because of static energy issue possibility and 7) choosed the default settings from the BIOS menu. Still same ! What am I supposed to do ?

If it's under warranty, I'd send it back to Toshiba and have them fix it right this time. It took 2 repairs for the Depot to fix my problem, by replacing the mother-board.
Call customer relations and try to get it sent to Toshiba "VIP" Tri-Star repair facility in Garden Grove CA 92843, they repair it when their regular service tech's can't get it right the first, or second time.
Fix it now, or it will be a hassle for you as long as you own it.

Satellite A300-1JH PSAGLE: Control buttons don't work with XP

Hello there.
I own a Toshiba Satellite A300 psagle.
It works beautifully, but there is a problem: the tactile music buttons don't work.
I am using Windows XP and I have installed all the drivers available.
Could some one please tell me what I should do.
P.s. how can I activate the "face recognition" option?
Please reply.
Regards.

Hi
Regarding the Toshiba Control Media buttons;
You have to install the Toshiba Controls from the Toshiba European driver page.
Check there the Satellite A300 PSAG8E series and download the Toshiba Controls
Regarding the face reorganization:
Check these threads:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=127846&#127846
http://forums.computers.toshiba-europe.com/forums/message.jspa?messageID=131453
Bye

Satellite A300-1GN - Media buttons don't work with Win 7

Hei
I installed windows 7 to my Toshiba satellite a300 1gn, Short Model No: psagce and some illuminated media buttons don't work.
i have the latest drivest but still nothing. first button is should controll the illumination for media buttons, touch pad and Satellite logo.
second button should open media player or something like that. the other fore buttons work fine!
Could someone helt me solve my problem?

Hi
You have to configure the single buttons.
This Toshiba button support pop up will appear if the pressed button was not configured.
So press the button and then assign the action, application.
You have to expand this menu pressing on the small arrow on the right.
Greets

Satellite A300-1G5 PSAG4E - Multimedia Buttons don`t work properly

My multimedia buttons don`t work properly any more. I`m talking abut the first 2 buttons (Mute and Media Player - buttons).
I just tried to reinstall VAP but it`s the same. I must say i can use Mute button but it won`t shows up that icon for mute.
The Media player button doesen`t work at all.
I just tried to search on this form for a sollution but i couldn`t find it.
All the rest of the buttons (play/pause, stop, next, previews) are working just fine.
As far as i remember 2 days ago all my multimedia buttons worked perfectly.
In this time i didn`t reinstalled OS or any other drivers.
I`m using the last version of BIOS (downloaded from toshiba website) and Windows 7 Ultimate. I have a Toshiba Satellite A300 - 1G5 PSAG4E.
Can you give me some advices about that pls?
Message was edited by: blunthlox

Solved. I used a system restore at yesterday`s date and it`s ok now.

Satellite U400: Need Vista install order and Control buttons don't work

I bought an Satellite U400-11T model with french windows Vista.
I want to change the french Vista to hungarian Vista.
Of course I bought a legal vista HUN and downloaded the drivers etc.
I am interrested in about the install order called installation instruction like at the XP models.
My second problem is; I have already installed the new Vista HUN and the 6 easy key touch buttons don't work anymore.
Where can I switch on it or wich program must i reinstall?
Thanks
Schmid

Hi
The installations order for Satellite U400 should be as follow:
Windows Vista SP1
Intel(R) Chipset Module
Intel(R) Robson(Intel iMSM Driver)
Intel(R) Crestline-GM / UMA Driver or AMD M82XT /M86 Driver V8.452.2
Conexant CX20561 Audio Driver
Marvell 8040/8055 LAN Driver
Synaptics Touch Pad Driver
Alps Touch Pad Driver
Conexant Modem Driver
Netwaiting
Modem Region Select Utility
Wireless LAN Driver
Chicony Camera Software
Bluetooth Stack for Windows by Toshiba
CIR Port Driver V7.1.62.2012
TOSHIBA Value Added Package
TOSHIBA Hardware Setup Utility
TOSHIBA Supervisor Password
TOSHIBA SD Memory Utilities
Authentec AES1610 Fingerprint Utility
TOSHIBA ConfigFree
TOSHIBA WPS Library
TOSHIBA Assist
TOSHIBA Speech System
TOSHIBA Extended Tiles for Windows Mobility Center
TOSHIBA Remote Control Manager
CD/DVD Drive Acoustic Silencer V2.02.00
Toshiba HDD Protection
TOSHIBA Face Recognition
TOSHIBA TRS Driver
Broadcom
HDMI Control Manager
Please do not ask me about single tools. Install all offered stuff following this list and I hope everything will work well.
Bye

Some buttons won t work how do i fix it?

some buttons won t work- others are sticky- need to be hit twice- how do I fix it?

What sort of keyboard are you referring to? Macbook, desktop keyboard, etc?

Some links don't work in Safari

I ran a whole bunch of software updates a while ago (funny, after the entire process, nothing actually updated... I had to run it again later), and somehow, in the process, something went wrong with Safari. Now, some links don't work. It's mostly links in the content portions of webpages. For example, things like the Store/Mac/etc buttons at the top of the Apple site work fine, but things like links in forum signatures don't. I have to open them in a new tab. I tried updating Safari, but it didn't fix anything. I've tested Firefox and Camino and they work fine, but Safari is my browser of choice, so this is pretty irritating. Any ideas as to what's causing this and how to fix it?

You might try installing a fresh version of SafariStand and see if you still have the problem with dead links. I'm not familiar with the 'Quick Search' feature but you could have a look at Glims. Don't try to run both Glims and SafariStand together.

Flash buttons don't work

I created my template in Dreamweaver and 9 other pages from
the template. Now I inserted flash buttons in the original template
and linked them to all other pages. Buttons work in the original
template but not in any of other pages, even though I updated the
pages with all the changes. What am I doing wrong??? I am losing my
mind here.
Any help appreciated.
Thanks!

Flash buttons don't work in any real sense of the word,
anyhow. Why are you
using them?
If you want to use Flash for navigation, consider this -
1. Some people don't have Flash installed - what do they do?
2. Search engines don't parse Flash links - your site will
not be spidered
3. Screen assistive devices don't parse Flash links - what
will those users
do?
4. DW cannot maintain links within a Flash movie, so if you
move or rename
a linked file, your navigation will break - what will you do?
It's usually a very bad idea for these reasons...
This problem is due to the fact that you are placing the
buttons into a
Template file. In this case, and assuming you want to inherit
all the
problems, make the links to the buttons ROOT RELATIVE.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"zxh5079" <[email protected]> wrote in
message
news:ga1gp6$qos$[email protected]..
>I created my template in Dreamweaver and 9 other pages
from the template.
>Now I
> inserted flash buttons in the original template and
linked them to all
> other
> pages. Buttons work in the original template but not in
any of other
> pages,
> even though I updated the pages with all the changes.
What am I doing
> wrong???
> I am losing my mind here.
> Any help appreciated.
>
> Thanks!
>

Click wheel and buttons don't work on 5th gen.

I have had my iPod for about half a year and for some reason my iPod buttons don't work. If I move the hold button it turns on but none of the other buttons work. It charges and everything. Does anyone know what to do?
5th generation Windows XP

There isn't any problem with your ipod, theres just a different way of going about when you put video games on your ipod. First, plug in your ipod. when your ipod icon appears on the left side where it usually does, click on it. Look at the top on the ipod screen that appears. The screen should give u info about your ipod. At the top look for an icon that says games. Pictures and a few other things are there but click on games. Once that screen appears click on the check mark that say sync games. After that it is pretty self explanatory. GoodLuck

Portege M750 and Win8.1 Pro -tablet buttons don't work

Hi
I'm having difficulties installing the tablet buttons in WINDOWS 8.1 Pro. Everything else works, perfectly.
In Windows 8 Pro this buttons worked nicely, but now, after a clean install of Windows 8.1 Pro two of the buttons don't work. The buttons are the Toshiba assist button and the presebtation button. I've tried to configure them in Toshiba assist software but nothing happens.
I'm sure I've installed all drivers that made wverything work with Windows 8. As anyone tryed this and add success?

> I'm sure I've installed all drivers that made wverything work with Windows 8
Windows 8.1 is not Windows 8 and many of Toshiba Win 8 drivers and tools dont work or are not fully compatible with Win 8.1
As far as I know the Toshiba does not support Win 8.1 on this Portege M750.
This means that no Win 8.1 drivers will be released and in such case some notebook features like the control buttons could not work properly.
Fact is that using Windows Vista or Win 7, such buttons were controlled by Value Added Package. This package does not exist for Win 8.1 and has been replaced by other software called Toshiba System Driver
So in case you want to try to get the buttons to work, I recommend checking this with Toshiba System Driver

Buttons don't work

I am working on a small application.
My main frame is a public class that defines two buttons in its constructor one for input and the other for feedback.
The input screen and the feedback screens are defined as inner listener classes of the main class.
The code compiles fine but the buttons don't work.Please take a look at my code and make suggestions for what I am doing wrong
Thanks
import java.awt.*;
import java.awt.event.*;
public class project1 extends Frame {
static Object source;
static Button input, feedback, apply;
public project1(){
super("Project Development Coordination System");
setSize(500,500);
setLayout(new BorderLayout());
//Build and add 1st Panel of project1
Panel p1 = new Panel(new BorderLayout());
TextField Title = new TextField();
Title.setFont(new Font("Sansserif", Font.BOLD, 48));
Title.setText("HORNSONIC");
Title.setEditable(false);
TextField Name = new TextField();
Name.setFont(new Font("Sansserif", Font.BOLD, 30));
Name.setText("Hera International, Inc.");
Name.setEditable(false);
p1.add(Title, BorderLayout.NORTH);
p1.add(Name, BorderLayout.CENTER);
add(p1, BorderLayout.NORTH);
//Build and add 2nd Panel
Panel PDCS = new Panel();
TextField pdcs = new TextField();
pdcs.setFont(new Font("Sanserif", Font.BOLD, 22));
pdcs.setText("Project Development Coordination System");
pdcs.setEditable(false);
PDCS.add(pdcs);
add(PDCS, BorderLayout.CENTER);
//Build and add 3rd Panel
Panel buttons = new Panel();
Button input = new Button("INPUT");
buttons.add(input);
Button feedback = new Button("FEEDBACK");
buttons.add(feedback);
input.addActionListener( new Input());
feedback.addActionListener(new Feedback());
add(buttons, BorderLayout.SOUTH);
addWindowListener(new WindowAdapter(){
public void windowClosing(WindowEvent event){
     System.exit(0);
//end of project1()
//Input class
static class Input extends Frame implements ActionListener {
          Input(){
super("Input");
setSize(500,500);
//Build and add FirstPanel of the Frame
Panel FP = new Panel(new BorderLayout());
//Build and add northpanel of FP
Panel np = new Panel(new BorderLayout());
//Build and add subpanel1 of np
Panel subpanel1= new Panel();
Label L1 = new Label("Sample#");
TextField T1 = new TextField(10);
T1.setEditable(true);
Label L12 = new Label("Customer:");
TextField ctf = new TextField(10);
ctf.setBackground(Color.gray);
ctf.setForeground(Color.black);
ctf.setEditable(true);
subpanel1.add(L1);
subpanel1.add(T1);
subpanel1.add(L12);
subpanel1.add(ctf);
//Build and add subpanel2 of np
Panel subpanel2 = new Panel();
TextField sub1t = new TextField(10);
sub1t.setBackground(Color.gray);
sub1t.setForeground(Color.black);
sub1t.setEditable(true);
subpanel2.add(sub1t);
Label sublabel = new Label("Model#");
subpanel2.add(sublabel);
TextField sub2t = new TextField(10);
sub2t.setBackground(Color.gray);
sub2t.setForeground(Color.black);
sub2t.setEditable(true);
subpanel2.add(sub2t);
np.add(subpanel1, BorderLayout.NORTH);
np.add(subpanel2, BorderLayout.CENTER);
FP.add(np, BorderLayout.NORTH);
//Build and add centerpanel of FP
Panel cp = new Panel(new BorderLayout());
//Build and add subcenter1 of centerpanel
Panel subcenter1 = new Panel(new BorderLayout());
Panel NP = new Panel();
Label Project = new Label("Project Scope");
NP.add(Project);
TextField PS = new TextField(10);
PS.setBackground(Color.gray);
PS.setForeground(Color.black);
PS.setEditable(true);
NP.add(PS);
Label Appl = new Label("Application:");
NP.add(Appl);
TextField Price1 = new TextField(10);
Price1.setBackground(Color.gray);
Price1.setForeground(Color.black);
Price1.setEditable(true);
NP.add(Price1);
subcenter1.add(NP, BorderLayout.NORTH);
Panel CP = new Panel();
Label TP = new Label("Target Price-");
CP.add(TP);
TextField appl = new TextField(10);
appl.setBackground(Color.gray);
appl.setForeground(Color.black);
appl.setEditable(true);
CP.add(appl);
Label quote = new Label("Quoted Price-");
CP.add(quote);
TextField Q = new TextField(10);
Q.setBackground(Color.gray);
Q.setForeground(Color.black);
Q.setEditable(true);
CP.add(Q);
subcenter1.add(CP, BorderLayout.CENTER);
cp.add(subcenter1, BorderLayout.NORTH);
//Build subcenter panel of cp
Panel subcenter = new Panel(new GridLayout(1,3));
List list = new List (3,true);
list.addItem("Woofer:");
list.addItem("Mid:");
list.addItem("Tweeter");
subcenter.add(list);
TextArea inches = new TextArea(3,5);
inches.setBackground(Color.gray);
inches.setForeground(Color.black);
inches.setEditable(true);
subcenter.add(inches);
List list1 = new List(3, true);
list1.addItem("Count-");
list1.addItem("Count-");
list1.addItem("Count-");
subcenter.add(list1);
TextArea count = new TextArea(3,5);
count.setBackground(Color.gray);
count.setForeground(Color.black);
count.setEditable(true);
subcenter.add(count);
List list2 = new List(3, true);
list2.addItem("Materials:");
list2.addItem("Materials:");
list2.addItem("Materials:");
subcenter.add(list2);
TextArea materials = new TextArea(3,5);
materials.setBackground(Color.gray);
materials.setForeground(Color.black);
materials.setEditable(true);
subcenter.add(materials);
cp.add(subcenter, BorderLayout.CENTER);
FP.add(cp, BorderLayout.CENTER);
//Build and add southpanel of FP
Panel sp = new Panel();
TextArea comments = new TextArea("Comments:", 3,30);
sp.add(comments);
FP.add(sp, BorderLayout.SOUTH);
add(FP, BorderLayout.NORTH);
//Build and add SouthPanel of Frame
Panel SP = new Panel();
List l1 = new List(8,true);
l1.addItem("Quote Requested:");
l1.addItem("Quote to be completed by:");
l1.addItem("Sample Requested:");
l1.addItem("STd sent to Factory:");
l1.addItem("Factory estimated ETD:");
l1.addItem("Revised ETD#1:");
l1.addItem("Revised ETD#2:");
l1.addItem("Revised ETD#3:");
SP.add(l1);
TextArea dates1 = new TextArea(8,8);
dates1.setBackground(Color.gray);
dates1.setForeground(Color.black);
dates1.setEditable(true);
SP.add(dates1);
List l2 = new List(8, true);
l2.addItem("Days Quote overdue:");
l2.addItem("Date Quote Received:");
l2.addItem("Actual ETD:");
l2.addItem("Sample Arrival Date:");
l2.addItem("Days Sample overdue:");
l2.addItem("Days in Development:");
l2.addItem("Date sent to customer:");
l2.addItem("Actual Days to customer:");
SP.add(l2);
TextArea dates2 = new TextArea(8,8);
dates2.setBackground(Color.gray);
dates2.setForeground(Color.black);
dates2.setEditable(true);
SP.add(dates2);
add(SP, BorderLayout.SOUTH);
//Build and add CenterPanel of Frame
Panel TD = new Panel();
TextField td = new TextField("TIME IN DEVELOPMENT");
TD.add(td);
add(TD, BorderLayout.CENTER);
          addWindowListener(new WindowAdapter(){
public void windowClosing(WindowEvent event){
     System.exit(0);
}// end of input()
public void actionPerformed(ActionEvent Event)
Object source = Event.getSource();
if (source == input){
               new Input();
               setVisible(true);
}//end of input if
          }//end of actionPerformed.
     }//end of class input
//Feedback class
static class Feedback extends Frame implements ActionListener{
Feedback(){
super("Feedback");
setSize(500,500);
//Build and add panel 1.
Panel p1 = new Panel(new BorderLayout());;
//Build and subpanel off panel 1
Panel subpanel1= new Panel();
Label L1 = new Label("Sample#");
TextField T1 = new TextField(10);
T1.setEditable(true);
Label L12 = new Label("Customer:");
TextField ctf = new TextField(10);
ctf.setBackground(Color.gray);
ctf.setForeground(Color.black);
ctf.setEditable(true);
subpanel1.add(L1);
subpanel1.add(T1);
subpanel1.add(L12);
subpanel1.add(ctf);
Panel subpanel2 = new Panel();
TextField sub1t = new TextField(10);
sub1t.setBackground(Color.gray);
sub1t.setForeground(Color.black);
sub1t.setEditable(true);
subpanel2.add(sub1t);
Label sublabel = new Label("Model#");
subpanel2.add(sublabel);
TextField sub2t = new TextField(10);
sub2t.setBackground(Color.gray);
sub2t.setForeground(Color.black);
sub2t.setEditable(true);
subpanel2.add(sub2t);
p1.add(subpanel1, BorderLayout.NORTH);
p1.add(subpanel2, BorderLayout.CENTER);
add(p1, BorderLayout.NORTH);
//Build and add Panel 2
Panel p2 = new Panel(new BorderLayout());
//Build and add subcenter1 of Panel 2.
Panel subcenter1 = new Panel(new BorderLayout());
//Build subpanels of subcenter 1.
Panel NP = new Panel();
Label Project = new Label("Project Scope");
NP.add(Project);
TextField PS = new TextField(10);
PS.setBackground(Color.gray);
PS.setForeground(Color.black);
PS.setEditable(true);
NP.add(PS);
Label Appl = new Label("Application:");
NP.add(Appl);
TextField Price1 = new TextField(10);
Price1.setBackground(Color.gray);
Price1.setForeground(Color.black);
Price1.setEditable(true);
NP.add(Price1);
subcenter1.add(NP, BorderLayout.NORTH);
Panel CP = new Panel();
Label TP = new Label("Target Price-");
CP.add(TP);
TextField appl = new TextField(10);
appl.setBackground(Color.gray);
appl.setForeground(Color.black);
appl.setEditable(true);
CP.add(appl);
Label quote = new Label("Quoted Price-");
CP.add(quote);
TextField Q = new TextField(10);
Q.setBackground(Color.gray);
Q.setForeground(Color.black);
Q.setEditable(true);
CP.add(Q);
subcenter1.add(CP, BorderLayout.CENTER);
p2.add(subcenter1, BorderLayout.NORTH);
//BUILD and add subcenter to Panel 2);
Panel subcenter = new Panel();
List list = new List (3,true);
list.addItem("Woofer:");
list.addItem("Mid:");
list.addItem("Tweeter");
subcenter.add(list);
TextArea inches = new TextArea(3,5);
inches.setBackground(Color.gray);
inches.setForeground(Color.black);
inches.setEditable(true);
subcenter.add(inches);
List list1 = new List(3, true);
list1.addItem("Count-");
list1.addItem("Count-");
list1.addItem("Count-");
subcenter.add(list1);
TextArea count = new TextArea(3,5);
count.setBackground(Color.gray);
count.setForeground(Color.black);
count.setEditable(true);
subcenter.add(count);
List list2 = new List(3, true);
list2.addItem("Materials:");
list2.addItem("Materials:");
list2.addItem("Materials:");
subcenter.add(list2);
TextArea materials = new TextArea(3,5);
materials.setBackground(Color.gray);
materials.setForeground(Color.black);
materials.setEditable(true);
subcenter.add(materials);
p2.add(subcenter, BorderLayout.CENTER);
//Build and add south subpanel of Panel 2
Panel subpanel = new Panel();
Label L2 = new Label("Sample Disposition:");
subpanel.add(L2);
TextField T2 = new TextField(10);
T2.setEditable(true);
subpanel.add(T2);
Label l2 = new Label("Date:");
subpanel.add(l2);
TextField t2 = new TextField(10);
t2.setEditable(true);
subpanel.add(t2);
TextArea TF = new TextArea("Feedback:",3,30);
TF.setEditable(true);
subpanel.add(TF);
p2.add(subpanel, BorderLayout.SOUTH);
add(p2, BorderLayout.CENTER);
//Build and add Panel 3.
Panel p3 = new Panel();
Label L3 = new Label("Project Continued on Revision#:");
TextField T3 = new TextField(10);
T3.setEditable(true);
Label l3 = new Label("Order Placed:");
TextField t3 = new TextField(10);
t3.setEditable(true);
p3.add(L3);
p3.add(T3);
p3.add(l3);
p3.add(t3);
add(p3, BorderLayout.SOUTH);
setVisible(true);
addWindowListener(new WindowAdapter(){
public void windowClosing(WindowEvent event){
     System.exit(0);
}//end of Feedback()
public void actionPerformed(ActionEvent AE){
if (AE.getSource() == feedback){
new Feedback();
     setVisible(true);
}//end of feedback if
}//end of actionPerformed
}//end of class Feedback
public static void main (String args[]){
     project1 window = new project1();
     window.setVisible(true);
     //end of main
}//end.

I compiled and did run your code....
it seems you are trying to implement a Frame with two buttons... each time the user click on a button, the main frame displays the equivalent panel with a set of components .. isn�t it ?
well... some tips:
1 - Why don�t you use a JTabbedPane ? a much better container than a simple Frame....
2 - If you really need to use a Frame as a container of multiple forms.. then you should take a look in the java.awt.CardLayout
other tip: don�t use the Frame component as the same class as the ActionListener.. divie these comopnents in two classes...

:*( Form buttons don't work for all testers

I created a form in Acrobat 9.1 using Forms> Add or Edit Fields. The form contains action buttons for next page and previous page, to clear all fields, and (with the generous help of a fellow forum member) to print the form and save it to disk. I optimized the form with compatibility set to Acrobat 8.0 and later, then enabled it for Reader. I sent this form to several users for testing.
Those using Acrobat have no problems with it.
Those using Foxit Reader have no problems with the action buttons or the form fields (except that date fields are finicky; Foxit doesn't convert the dates to the correct format the way Reader or Acrobat do). But, the yellow background that I created as a watermark -- so I could make it visible but not print -- is printing. That's not anything that Acrobat can help, but it is a very good reason to not recommend using Foxit. It would create a dreadful shortage of yellow inkjet ink.
Those using Reader 8.0 to 8.1.2 are having several problems. For them, the action buttons don't work... except the "clear all fields" one. The buttons don't do anything; there are no errors, no messages, no activity of any kind except to change color when clicked.
The buttons that don't work are all set up as Mouse Up actions executing a menu item... for example, "Go to page 2" is just View>Go To>Next Page. The "Clear all fields" button is, on Mouse Up, "Reset a form" with all fields selected... so it's the only kind of button that works for Reader users, and it's the only button that doesn't execute a menu item.
Why is there a difference in actions these users can run? If it's a security issue... what possible risk is there in going to the next page, using a button instead of a scroll bar or Page Down key??? I can find no common sense here, especially because Reader users are the only ones barred from these form actions. Everyone else can use them.
-- Also, these testers (Reader 8+) are having problems with the tab order. Some of the radio button groups (which have no more than three options, Yes, No and NA) at first appear to be tabbing correctly, because the Yes option receives focus in the correct order... but randomly, tabbing through several fields, suddenly the No option will get focus... in a radio button group nowhere near the current tab location. Tabbing is rendered useless, then, because these anomalies are unpredictable and it doesn't appear there's anything I can do to prevent this from happening.
It's pointless to delete and re-add the afflicted radio buttons. That has no effect... and the radio button groups are already in the correct order anyway. I don't know how this could possibly happen... But it doesn't happen for the Foxit or Acrobat testers.
• Why would Reader be the only app that can't use the buttons and can't tab through the fields correctly? I'd think Adobe's own software would work best with their own file format. •
Is Reader 8 the problem --- should those users all update to the newest version? I don't have any Reader 9+ testers yet. Nobody seems interested in it. The testers all assume the problems are MY fault, so nobody's happy with me and no one wants to bother testing the forms because there's always something wrong.
<hair-pulling> I seriously regret upgrading to Acrobat 9.1. I know other forum members who agree this thing is catastrophically buggy -- I've wasted weeks trying to iron out all the problems I've been having with these forms, forms that should have been quick and simple to create, and in past versions of Acrobat, would have been. Yet I'm still tearing out my hair over tab order! Worse, I fear I'm close to losing my job for all the time wasted and all the projects I've fallen behind in because of this. <no /hair-pulling in sight>

I have no clue, but it might make a difference depending on the form being produced in Acrobat versus Designer. Acrobat will take you both places and one of them may have an issue with backward compatibility. I have not heard of that, but it is a possibility.

Satellite A205-S5843: Unknown WLAN card & some buttons don't work

Similar Messages

Maybe you are looking for