Satellite A210 ATI Mobility Radeon driver crashes

Hi all,
Recently I had to update my graphics driver because the old one did not support DirectDraw. So I uninstalled the old driver and downloaded the driver from the Toshiba site (The driver prescribed by thosiba for the A210-10Y).
I installed the new driver which went OK. I had to reboot my system and then the driver worked fine, but the problem now is that at uncertain moment s (during playing games or what so ever) the display turns green, blue, gray and yellow with stripes.
When that happens, the whole system grinds to a halt and there is no way to regain control of the system (CTRL+ ALT+DEL or the windows button do not work). The only solution is to reboot the system with the ON/OFF button.
Here is the information I was able to find with the problem solving option on vista, too bad this program is not able to give me a clear answer other than downloading the latest drivers from the ATI or Toshiba site.
Problem signature:
Name of problem: BlueScreen
Operation system version: 6.0.6000.2.0.0.768.3
Country code: 1043
Problem information:
BCCode: 117
BCP1: 84981510
BCP2: AD2BACBC
BCP3: 00000000
BCP4: 00000000
OS Version: 6_0_6000
Service Pack: 0_0
Product: 768_1
Files that could help describe the problem:
C:\Windows\Minidump\Mini012208-01.dmp
C:\Users\(USER)\AppData\Local\Temp\WER-82181-0.sysdata.xml
C:\Users\(USER)\AppData\Local\Temp\WER99AF.tmp.ver sion.txtProblemsignature:
Could someone please provide me a solution, I have been looking for answers on the internet for 7 days now, and still I have not been able to find a solution.
I tried different ways of installing the drivers, uninstalling them and installing them again, even tried the Modder program and the new CCC 8.1
Thank you very much in advance! :)

Thank you,
I have searched on the Toshiba site for an updat on my BIOS. When I search for "Toshiba A210" it gives me an update (v1.8), but when I use the option "search on your personal products" (which is my Toshiba A210-10Y) it says that there is no update available.
I want to be sure that I pick the right update if there is any.
_Edit:_
Sorry I have found the update sepcified for my A210-10y
Message was edited by: orly

Similar Messages

  • ATI Mobility Radeon X1600 graphics card Windows 8 driver missing

    I just installed Windows 8 Enterprise Trial version on HP nx9420 laptop (2GHz dual core prosessor, 4gb memory, ATI Motility Radeon X1600 graphics card with 256mb own memory, 1680x1050 native display resolution) on second partition, side by side with existing
    Windows 7. 
    Installation succeeded perfect, except Windows 8 couldn't install, nor did find from Windows Update display driver for ATI Mobility Radeon X1600 graphics card. Only Microsoft generic display driver was installed and it offered maximum 1450x800 resolution,
    so not laptops native 1680x1050 screen resolution. 
    Windows 7 can install working ATI driver right from Windows Update for that graphics card (version 8.561.0.0 dated 1.12.2008). 
    Laptop manufacturer HP has latest, old driver for Vista (version 8.453.0.0 dated 22.1.2008), so I installed that, selecting compatibility mode Vista with setup-program in Windows 8. That installed, but seems to have some problems, telling of missing library,
    maybe with some ATI extra diplay manager software and C++ 2005 library, that it installed. 
    MY QUESTION: Is there some problems with Windows 8 and that ATI Mobility Radeon X1600 graphics card? Why isn't the Windows 7 -version of ATI mobility radeon X1600 display driver available in Windows Update for Windows 8 too? 

    Thank you all of your thanks. 
    I can confirm that this solution works with Windows 10 Technology/Insider preview too. And surely works with forthcoming Windows RTM too. 
    Windows 8.1 and Windows 10 TP work both like a charm with nearly 10 years old HP Compaq nx9420 laptop, with Intel Core 2 Duo and ATI Mobility Radeon X1600 display adapter. Nice co-operation of "old" hardware and very Modern Windows OS.
    So in brief:
    If you have laptop with ATI Mobility Radeon X1600 or other X1000-series display adapter and
    you want to install Windows 8, 8.1 or 10, do this:
    0) First just install Windows 8.x/10. It will install Microsoft Generic display driver, but that doesn't support full resolution of ATI Mobility Radeon X1000 -series - for example it may show maximum 1400x1050 -resolution, thus your laptop display and Radeon
    X1000 may support native 1650x1050, but you can't obtain that resolution with that Microsoft generic driver. So you need ATI-driver and you can get it this way: 
    1) With Internet Explorer (this doesn't work with other browsers) go to
    Microsoft Update -catalog:   http://catalog.update.microsoft.com/
    2) Search "ATI Mobility Radeon X1600"
      (or X1300, X1800 etc)
    3) Sort search results by date (last update -column), latest on top. You will see drivers for Windows 7
    - they will work with Windows 8.x and 10 too. There is certainly two of them; other is 32 bit only and other is 64 bit dirver.
    4) Select proper driver version of them, according your Windows 32 or 64 bit, so click Add
    5) At top-right click Show basket and then download those driver packages to your computer. They are cab-file
    -packages. 
    6) Obtain 7-zip -utility, install it and with it unpack that cab-driver package on folder with its package-name.
    7) On start of taskbar, right mouse button click Windows-Start and then select Hardware management. On
    Hardware management -window open Display adapter -section, then mouse right click Microsoft adapter and select Update driver. Then on next window, select search driver from computer. 
    8) Browse on folder, where you unpacked ATI driver (on stage 6 earlier) and select Next ... that updates
    driver, on the go and you don't need even to reboot Windows. 
    9) Now you have proper ATI Mobility Radeon -driver in use. It  surely sets automatically resolution
    according your laptop screen (so recommended native resolution of screen panel) or you can select that on diplay settings. 
    Extra: For that Windows 8.x/10 boot works fine too, do this too: 
    Seems that Windows 8.x (and Windows 10 too), with their hybrid-shutdown -functionality, require some support of the display adapter, that ATI Radeon Mobility x1000 -series don't have. 
    So the solution is to disable that Windows 8.x (or Windows 10) hybrid boot -functionality (that is quicker boot) and to use "normal boot". 
    You can fix that this way:
    - at end of Taskbar click battery/power icon and select Power settings
    - navigate to power and sleep settings
    - either at bottom of those settings, or in Win10 more power settings, select power buttons functionality/settings (so what power button, sleep button or closing laptop screen does)
    - at bottom of those settings is shutdown options (or with similar name). uncheck "use quick boot" -settings (for to uncheck that you may need to click first upper "changing disabled settings" (or similar name) at top or windows) 
    (I recommend to check Hibernate at the same time too, because that is usefull)
    - then Save settings and reboot Windows and you have got rid of that problem that Windows 8.x/10 don't show Lock screen, now it does.
    Boot takes just a little longer, so practically no problem. And if you need quicker boot with laptop, use Hibernate-state, so don't shut down your laptop, but instead put it into Hibernate-state (that is better than Sleep mode, because Hibernate-mode doesn't
    consume battery-power, like Sleep-mode does)

  • Satellite A65-51762 Mobility Radeon 7000 ICG driver crashes

    I have a Toshiba Satellitle A65-51762. It operated for years without problems. About 8 months ago, while running DVDShrink, DVDDecrypter, DVDFabDecrypter or WinDVD, about every two weeks, the video will suddenly drop to lo-res (640x480) and complain, but I could continue if it was DVDShrink, DVDDecrypter or DVDFabDecrypter. Rebooting would bring back it to hi-res..
    It got worse and worse, eventually happening in 30 to 60 minutes after beginning the program. Finally instead of rebooting I would get blue screen Hard Error C0000415, then be asked if I wanted to reboot normally, which it did.
    Then I removed all ATI software, deleted the device, let WinXP reinstall it as VGA, then installed the updated driver. It worked fine for a few days and then began doing the same thing every two or three hours.
    Could this be hardware? The ATI MOBILITY RADEON 7000 ICG chip? Something else? How is DVD involved? DMA? BIOS? Would it have to go back to the factory or can I pull chips?
    It feels more like software. How can I check it out? Are you familiar with the problem?

    I'll try www.omegadrivers.net. Except for a similar video crash during Skype last night, my ATI crashes occur while processing DVD files from disk or an actual DVD, lots of file data running through the system. Evidently the ATI chip is affected by what else is going on in the system. The system freezes about two minutes then drops to lo-res. I've seen error messages rebooting afterwards about the ATI chip caught itself in an infinite loop.
    II just had two more video crashes. Only Netscape 7.2 has been run since reboot. During the first reboot, I got a blue screen message saying
    ati2dvag was caught in an infinite loop, either hardware is failing
    or software is reprogramming the chip wrong.
    I had to use Reboot Windows Normally. The 2nd crash now say ATI driver
    stopped resonding, probably another infinite loop. So I have a driver problem
    or a hardware problem.
    I couldn't figure how to use omegadrivers.net to find a driver.

  • Where do I get ATI mobility Radeon 9600/9700 Driver for Satellite M30?

    Hey ho, had to reinstall winxp now i cant get any drievrs for the graphic card, I tried ATI they got the ones i need, but say they dont support toshiba notebooks and i cant install or even download the driver i need.i looked everywhere . on this site in the drivers section i cant find any ati drivers or any graphic drivers at all...Anyone got a Link for me plz?
    Ati mobility Radeon 9600/9700 Driver for Satellite M30
    Hope this works somehow been looking all day long now :(

    Hi,
    its your lucky day my friend.
    Check this sites and download the drivers you need:
    http://www.laptopvideo2go.com/
    http://www.omegadrivers.net/
    The drivers are native Nvidia/ATI drivers but the *.inf files (the files where the hardware information and the settings for the cards are listed) were fitted for mobile systems. That means you can install them on your machine and by the way you will get the most actual drivers.
    Greets

  • Can not install latest ATI mobility Radeon x1600 display driver for my Satellite A100

    Hello,
    my Satellite A100-704 PSAA9E is equipped with the ATI Mobility Radeon X1600 display graphic card, for which ATI provides a new driver, named Catalyst 8.3. My issue is that when I run the verification software I get a message telling me that driver is not suitable to be installed on my system.
    Is that any information available about it? Can I still install the new Catalyst driver or it's better if I don't? Oh, the current driver I have running on my notebook is the one downloaded from the Toshiba site, 8.292 I believe.
    Any information is appreciated. Thank you very much.

    > Can I still install the new Catalyst driver or it's better if I don't?
    I dont recommend the installation of any 3rd party graphic drivers. The fact is that such drivers are not tested and not certified and nobody knows how such driver would affect the notebooks hardware in worst case it could lead to the GPU overheating and damage
    best regards

  • AMD M880G with ATI Mobility Radeon HD 4250 display driver stopped responding

    I have received the following message on my HP Pavilion dv7:
    Display driver AMD driver stopped responding and has successfully recovered. It is an AMD M880G with ATI Mobility Radeon HD 4250.
    The screen randomly does this starting a day or so ago. Maybe once every few hours or it may do it once every 5 min three times in a row. The screen has random little blue dots here and there.
    What do I need to do? Is this something I could potentially fix/replace/etc?

    Is this they way you did a factory reset tomu96?  Performing an HP System Recovery (Windows 7)
    If so, that should have resolved the issue, but since it continues to crash if you made no changes after that restore, you probably have hardware failure.
    In North America, call (800)-474-6836 outside of North America find your support number here HP Technical Support
    TwoPointOh
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Flash Player Crashes completely on ATI Mobility Radeon

    hello,
    I am the administrator of a couple of websites, that share the same AJAX/Flash AS3 basic structures. Normally, everything works fine, but on a few notebooks, every browser crashes at that moment, the flash components start to work.
    the notebook:
    DELL studio XPS 16
    ATI Mobility Radeon HD 3670
    Windows Vista
    http://www.dell.com/us/en/home/notebooks/laptop-studio-xps-16/pd.aspx?refid=laptop-studio- xps-16&cs=19&s=dhs
    an example page:
    http://www.thadasuanduanchai.com
    i have no idea, why that happens, but i suggest, that a problem with flash-graphics card or flash-built-in camera may be responsable for the problem.
    Has anybody an idea?
    thank you very much,
    C.Brosdau
    Germany

    If you read in graphics hardware support in some previous releases of Flash Player, flash video decoding support a.k.a. h.264 hardware video decoding is supported fully by ATi(or AMD) Radeon HD 4xxx and higher. The Radeon HD 3xxx and lower can't support h.264 video decoding for flash video decoding fully enough.

  • Need driver for display (ATI Mobility Radeon 7000 IGP)

    Necessary driver for display ATI MOBILITY RADEON 7000 IGP under operating system Win 98, ME

    Hi
    Like Joao said try to find necessary drivers on Toshiba download site. All drivers are designed for each notebook model and if you use a driver downloaded from graphic card producer site there is no guarantee that it will work properly.
    Good luck!

  • HP G-72 Video driver UPDATE (ATI Mobility Radeon HD 5470)

    Hi...
    Pleas I need latest video driver for my GPU Ati Mobility Radeon 5470...win7 64bit
    I found only driver of 2010 (sp 50231) and I need the newer...
    When I download for example Catalyst 13.9...with graphics driver and install, switchable graphics stop working...
    Pleas can you help me? Witch product I can download?
    Thx so much
    This question was solved.
    View Solution.

    Hi Sirec,
    Please let me know what is your model number and current operating system?
    Here is a link that will help you find that out.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00033108&lc=en&cc=us&dlc=en
    Please let me know.
    Thanks
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • ATI Mobility Radeon HD 6370 switchable graphics driver

    Is there any way to get a new driver for the ATI Mobility Radeon HD 6370 switchable graphics card? I have a HP Pavilion dv7-4276nr Entertainment Notebook PC and the latest driver I can download from HP are from 2010!! Lots of games are not running properly because of the lack of updated drivers and I cannot download them from de ATI page since they wont work. Please tell me if there is any other place from where I can download a more updated driver. Thanks in advance.

    @stormsfury 
    I understand that you are looking for help with disabling the more powerful GPU on your notebook.
    I did some searching and found a few posts on this matter, by a few of the HP forum experts. Check through these pages:
    how to disable switchable graphics
    Disabling switchable graphics or setting global default.
    Malygris1
    I work on behalf of HP
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

  • ATI Mobility Radeon X600 driver update installs but screen goes black

    My HP Pavilion zd8000 came with the ATI Mobility Radeon X600 graphics card.
    When I installed Windows 7, it auto-updates the driver (recognizing it by name), then upon restart, the screen goes black.
    Had to restart in safe mode and uninstall.
    Anyone else with this problem? Anyone find a solution?
    Thanks.

    Hello,
    According to your problem description, please perform the following steps to narrow down the issue.
    Run Windows Low-resolution 
    1) Detach all unnecessary peripheral devices from your computer, such as printers, scanners and removable storage devices.
    2) Restart the computer.
    3) Keep pressing the F8 key until the Windows Startup menu appears.
    4) Choose Enable Low-resolution video (640*480) option, and press Enter.
    5) Then install the display card driver in Windows Low-resolution mode.
    (You should contact ATI support to obtain the right device driver compatible with Windows 7)
    Note: In Low-resolution Mode, your system display and Desktop will look and perform differently than in Normal Mode. This is only temporary.
    Good Luck!

  • [Solved] ATI Mobility Radeon HD 2300 Problem - fglrx not loading

    I changed the currently unreliable GS 8600 nvidia card in my laptop to a compatible old ATI HD 2300 card from a similar model laptop but I can't get the Catalyst drivers to work with it. The open source driver xf86-video-ati works well with it for basic use, but is not so good for 3D. This card should work with an Amilo xi-2428 & has done for other people who have developed faulty nvidia cards.
    I have the legacy driver installed from AUR (Catalyst-total-hd234k) and have enabled Vi0L0's [xorg112] server properly in pacman.conf & downgraded to Xorg-server 1.12. I also tried downgrading to Xorg-server 1.11 & reinstalling the drivers from AUR. Plus I have enabled and tried Vi0L0's [catalyst-hd234k] repo in place of the AUR package each time too. Made no difference. I've blacklisted radeon too.
    When the laptop boots systemd-modules-load.service shows as failed.
    $ sudo systemctl --failed
    UNIT LOAD ACTIVE SUB DESCRIPTION
    systemd-modules-load.service loaded failed failed Load Kernel Modules
    LOAD = Reflects whether the unit definition was properly loaded.
    ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
    SUB = The low-level unit activation state, values depend on unit type.
    1 loaded units listed. Pass --all to see loaded but inactive units, too.
    To show all installed unit files use 'systemctl list-unit-files'.
    [fyn@Finnix ~]$ systemctl status systemd-modules-load
    systemd-modules-load.service - Load Kernel Modules
    Loaded: loaded (/usr/lib/systemd/system/systemd-modules-load.service; static)
    Active: failed (Result: exit-code) since Wed, 2012-12-19 15:29:57 GMT; 7min ago
    Docs: man:systemd-modules-load.service(8)
    man:modules-load.d(5)
    Process: 121 ExecStart=/usr/lib/systemd/systemd-modules-load (code=exited, status=1/FAILURE)
    It is only the fglrx module which fails to load:-
    $ sudo journalctl -b _PID=121
    -- Logs begin at Fri, 2012-10-26 09:21:22 GMT, end at Wed, 2012-12-19 15:38:07 G
    Dec 19 15:29:56 Finnix systemd-modules-load[121]: Failed to insert 'fglrx': No such device
    Dec 19 15:29:56 Finnix systemd-modules-load[121]: Inserted module 'nfs'
    Dec 19 15:29:57 Finnix systemd-modules-load[121]: Inserted module 'vboxnetflt'
    I have no idea how to get fglrx to load & since it fails to load so early during boot I doubt the problem lies with my Xorg.conf. Likewise neither aticonfig or the ATI control center work.
    aticonfig: No supported adapters detected
    amdcccle just give this message
    "There was a problem initializing Catalyst Control Center Linux edition. It could be caused by the following.
    No AMD graphics driver is installed, or the AMD driver is not functioning properly.
    Please install the AMD driver appropriate for you AMD hardware, or configure using aticonfig."
    Graphic card info
    $ hwinfo --gfxcard
    27: PCI 100.0: 0300 VGA compatible controller (VGA)
    [Created at pci.319]
    Unique ID: VCu0.SZRyUClQNUF
    Parent ID: vSkL.rRA4AOLb3d5
    SysFS ID: /devices/pci0000:00/0000:00:01.0/0000:01:00.0
    SysFS BusID: 0000:01:00.0
    Hardware Class: graphics card
    Model: "ATI M71 [Mobility Radeon X2100]"
    Vendor: pci 0x1002 "ATI Technologies Inc"
    Device: pci 0x7210 "M71 [Mobility Radeon X2100]"
    SubVendor: pci 0x1734 "Fujitsu Technology Solutions"
    SubDevice: pci 0x1107
    Revision: 0xce
    Memory Range: 0xd0000000-0xdfffffff (ro,non-prefetchable)
    I/O Ports: 0x2000-0x2fff (rw)
    Memory Range: 0xcfef0000-0xcfefffff (rw,non-prefetchable)
    Memory Range: 0xcfe00000-0xcfe1ffff (ro,non-prefetchable,disabled)
    IRQ: 5 (no events)
    I/O Ports: 0x3c0-0x3df (rw)
    Module Alias: "pci:v00001002d00007210sv00001734sd00001107bc03sc00i00"
    Driver Info #0:
    Driver Status: radeon is not active
    Driver Activation Cmd: "modprobe radeon"
    Config Status: cfg=new, avail=yes, need=no, active=unknown
    Attached to: #8 (PCI bridge)
    Primary display adapter: #27
    my Xorg.conf derived mainly from a newly generated config using Xorg :0 -configure
    Section "ServerLayout"
    Identifier "Arch"
    Screen 0 "Screen0" 0 0
    Screen 1 "Screen1" RightOf "Screen0"
    InputDevice "Mouse0" "CorePointer"
    InputDevice "Keyboard0" "CoreKeyboard"
    EndSection
    Section "Files"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc/"
    FontPath "/usr/share/fonts/TTF/"
    FontPath "/usr/share/fonts/OTF/"
    FontPath "/usr/share/fonts/Type1/"
    FontPath "/usr/share/fonts/100dpi/"
    FontPath "/usr/share/fonts/75dpi/"
    EndSection
    Section "Module"
    Load "glx"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "InputDevice"
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/input/mice"
    Option "ZAxisMapping" "4 5 6 7"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "Monitor Vendor"
    ModelName "Monitor Model"
    EndSection
    Section "Monitor"
    Identifier "Monitor1"
    VendorName "Monitor Vendor"
    ModelName "Monitor Model"
    EndSection
    Section "Device"
    ### Available Driver options are:-
    ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
    ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
    ### <percent>: "<f>%"
    ### [arg]: arg optional
    #Option "NoAccel" # [<bool>]
    #Option "SWcursor" # [<bool>]
    #Option "EnablePageFlip" # [<bool>]
    #Option "AccelDFS" # [<bool>]
    #Option "IgnoreEDID" # [<bool>]
    #Option "ColorTiling" # [<bool>]
    #Option "ColorTiling2D" # [<bool>]
    #Option "RenderAccel" # [<bool>]
    #Option "SubPixelOrder" # [<str>]
    #Option "AccelMethod" # <str>
    #Option "DRI" # [<bool>]
    #Option "TVStandard" # <str>
    #Option "EXAVSync" # [<bool>]
    #Option "EXAPixmaps" # [<bool>]
    #Option "ZaphodHeads" # <str>
    #Option "EnablePageFlip" # [<bool>]
    #Option "SwapbuffersWait" # [<bool>]
    Identifier "Card0"
    Driver "fglrx" # Essential.
    # Driver "vesa"
    BusID "PCI:1:0:0" # Recommended if autodetect fails.
    Option "OpenGLOverlay" "0" ##
    Option "XAANoOffscreenPixmaps" "false" ##
    EndSection
    Section "Device"
    ### Available Driver options are:-
    ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
    ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
    ### <percent>: "<f>%"
    ### [arg]: arg optional
    #Option "ShadowFB" # [<bool>]
    #Option "DefaultRefresh" # [<bool>]
    #Option "ModeSetClearScreen" # [<bool>]
    Identifier "Card1"
    Driver "fglrx"
    # Driver "vesa"
    BusID "PCI:1:0:0"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Card0"
    Monitor "Monitor0"
    DefaultDepth 24
    SubSection "Display"
    Viewport 0 0
    Depth 24 # Should not change from '24'
    Modes "1280x800" "1280x800" ## 1st value=default resolution, 2nd=maximum.
    Virtual 1664 1200 ## (x+64, y) to workaround potential OGL rect. artifacts/
    EndSubSection
    EndSection
    Section "Screen"
    Identifier "Screen1"
    Device "Card1"
    Monitor "Monitor1"
    SubSection "Display"
    Viewport 0 0
    Depth 1
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 4
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 8
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 15
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 16
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 24
    EndSubSection
    EndSection
    Section "DRI"
    Mode 0666 # May help enable direct rendering.
    EndSection
    Xorg log
    [ 22.305]
    X.Org X Server 1.12.4
    Release Date: 2012-08-27
    [ 22.306] X Protocol Version 11, Revision 0
    [ 22.306] Build Operating System: Linux 3.4.8-1-ARCH x86_64
    [ 22.307] Current Operating System: Linux Finnix 3.6.10-1-ARCH #1 SMP PREEMPT Tue Dec 11 09:40:17 CET 2012 x86_64
    [ 22.307] Kernel command line: root=/dev/sda3 ro video=vesa:off vga=0x360 init=/usr/lib/systemd/systemd nomodeset
    [ 22.308] Build Date: 27 August 2012 08:04:39AM
    [ 22.308]
    [ 22.309] Current version of pixman: 0.28.2
    [ 22.309] Before reporting problems, check
    to make sure that you have the latest version.
    [ 22.310] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 22.312] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Dec 19 13:14:33 2012
    [ 22.312] (==) Using config file: "/etc/X11/xorg.conf"
    [ 22.313] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 22.313] (==) ServerLayout "Arch"
    [ 22.313] (**) |-->Screen "Screen0" (0)
    [ 22.313] (**) | |-->Monitor "Monitor0"
    [ 22.313] (**) | |-->Device "Card0"
    [ 22.313] (**) |-->Screen "Screen1" (1)
    [ 22.313] (**) | |-->Monitor "Monitor1"
    [ 22.313] (**) | |-->Device "Card1"
    [ 22.313] (**) |-->Input Device "Mouse0"
    [ 22.313] (**) |-->Input Device "Keyboard0"
    [ 22.313] (==) Automatically adding devices
    [ 22.313] (==) Automatically enabling devices
    [ 22.313] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 22.313] Entry deleted from font path.
    [ 22.313] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 22.313] Entry deleted from font path.
    [ 22.313] (**) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/,
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
    [ 22.313] (**) ModulePath set to "/usr/lib/xorg/modules"
    [ 22.313] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    [ 22.313] (WW) Disabling Mouse0
    [ 22.314] (WW) Disabling Keyboard0
    [ 22.314] (II) Loader magic: 0x7c8b00
    [ 22.314] (II) Module ABI versions:
    [ 22.314] X.Org ANSI C Emulation: 0.4
    [ 22.314] X.Org Video Driver: 12.1
    [ 22.314] X.Org XInput driver : 16.0
    [ 22.314] X.Org Server Extension : 6.0
    [ 22.315] (--) PCI:*(0:1:0:0) 1002:7210:1734:1107 rev 206, Mem @ 0xd0000000/268435456, 0xcfef0000/65536, I/O @ 0x00002000/256, BIOS @ 0x????????/131072
    [ 22.315] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 22.315] (II) "extmod" will be loaded by default.
    [ 22.315] (II) "dbe" will be loaded by default.
    [ 22.315] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    [ 22.315] (II) "record" will be loaded by default.
    [ 22.315] (II) "dri" will be loaded by default.
    [ 22.315] (II) "dri2" will be loaded by default.
    [ 22.315] (II) LoadModule: "glx"
    [ 22.315] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 22.315] (II) Module glx: vendor="Advanced Micro Devices, Inc."
    [ 22.315] compiled for 6.9.0, module version = 1.0.0
    [ 22.315] (II) Loading extension GLX
    [ 22.315] (II) LoadModule: "extmod"
    [ 22.315] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 22.315] (II) Module extmod: vendor="X.Org Foundation"
    [ 22.315] compiled for 1.12.4, module version = 1.0.0
    [ 22.315] Module class: X.Org Server Extension
    [ 22.315] ABI class: X.Org Server Extension, version 6.0
    [ 22.315] (II) Loading extension MIT-SCREEN-SAVER
    [ 22.316] (II) Loading extension XFree86-VidModeExtension
    [ 22.316] (II) Loading extension XFree86-DGA
    [ 22.316] (II) Loading extension DPMS
    [ 22.316] (II) Loading extension XVideo
    [ 22.316] (II) Loading extension XVideo-MotionCompensation
    [ 22.316] (II) Loading extension X-Resource
    [ 22.316] (II) LoadModule: "dbe"
    [ 22.316] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 22.316] (II) Module dbe: vendor="X.Org Foundation"
    [ 22.316] compiled for 1.12.4, module version = 1.0.0
    [ 22.316] Module class: X.Org Server Extension
    [ 22.316] ABI class: X.Org Server Extension, version 6.0
    [ 22.316] (II) Loading extension DOUBLE-BUFFER
    [ 22.316] (II) LoadModule: "record"
    [ 22.316] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 22.316] (II) Module record: vendor="X.Org Foundation"
    [ 22.316] compiled for 1.12.4, module version = 1.13.0
    [ 22.316] Module class: X.Org Server Extension
    [ 22.316] ABI class: X.Org Server Extension, version 6.0
    [ 22.316] (II) Loading extension RECORD
    [ 22.316] (II) LoadModule: "dri"
    [ 22.316] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 22.316] (II) Module dri: vendor="X.Org Foundation"
    [ 22.316] compiled for 1.12.4, module version = 1.0.0
    [ 22.316] ABI class: X.Org Server Extension, version 6.0
    [ 22.316] (II) Loading extension XFree86-DRI
    [ 22.316] (II) LoadModule: "dri2"
    [ 22.316] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 22.317] (II) Module dri2: vendor="X.Org Foundation"
    [ 22.317] compiled for 1.12.4, module version = 1.2.0
    [ 22.317] ABI class: X.Org Server Extension, version 6.0
    [ 22.317] (II) Loading extension DRI2
    [ 22.317] (II) LoadModule: "fglrx"
    [ 22.317] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
    [ 22.333] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
    [ 22.333] compiled for 1.4.99.906, module version = 8.97.2
    [ 22.333] Module class: X.Org Video Driver
    [ 22.333] (II) Loading sub module "fglrxdrm"
    [ 22.333] (II) LoadModule: "fglrxdrm"
    [ 22.333] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
    [ 22.333] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
    [ 22.333] compiled for 1.4.99.906, module version = 8.97.2
    [ 22.333] (II) ATI Proprietary Linux Driver Version Identifier:8.97.2
    [ 22.333] (II) ATI Proprietary Linux Driver Release Identifier: UNSUPPORTED-8.97.100.3
    [ 22.333] (II) ATI Proprietary Linux Driver Build Date: Jul 3 2012 23:56:30
    [ 22.333] (++) using VT number 1
    [ 22.334] (WW) Falling back to old probe method for fglrx
    [ 22.337] (II) Loading PCS database from /etc/ati/amdpcsdb
    [ 22.337] (EE) No supported AMD display adapters were found
    [ 22.337] (EE) No devices detected.
    [ 22.337]
    Fatal server error:
    [ 22.337] no screens found
    [ 22.337]
    Please consult the The X.Org Foundation support
    at
    for help.
    [ 22.337] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
    [ 22.337]
    Solved. The  ATI Mobility Radeon HD 2300 was based on an earlier design & was not really one of the HD 2*** cards, even tho it was released as one (HD 2*** cards are R600 series while the HD 2300 is based on the R500 generation). So the offical drivers for it were relegated to legacy in 2009 with AMD's Catalyst 9.3 release & are no longer supported. Pretty crappy considering the HD 2300 was only on the market from 2007.
    To use the official catalyst drivers would require xorg 1.5.3 and kernel 2.6.29..... with no support for newer distros.
    Using open source drivers, cannot remember all the packages but have listed some below in case it helps anyone:-
    xf86-video-ati
    ati-dri
    lib32-ati-dri
    libtxc_dxtn
    lib32-libtxc_dxtn
    mesa
    lib32-mesa
    No xorg.conf needed for it using kms, but can make a config file to tweak if you like in the xorg.conf.d directory called 20-radeon.conf
    Last edited by Nixie (2012-12-24 17:21:29)

    Thanks for the response. It is not an obvious hardware issue. I would contact HP phone support to get the hardware addressed. You can utilize this website to learn how to contact HP appropriately, based on your region: Contact HP Worldwide
    Please let me know if you have any other questions or concerns. Thanks!
    Mario
    I worked on behalf of HP.

  • Gx623 ati mobility radeon 4670

    I have problem with ati mobility radeon 4670, as i can understand full core speed is reached just in 3d mode (675MHz), normal mode 300 MHz.
    I made a test with game "Blur" and it seems like something wrong with 3d control, because  i got lag. maybe drivers ? or smth ? 
    Driver version: 8.741.0.0
     i guess in 3d mode it should stay stable at 675MHz

    The temperatures are a bit high if it is a new laptop. If it's not, there may be some dust inside building the heat up. You should try installing system control manager and using the turbo mode. It improves the performance quite a lot. Also, i would suggest to update the game to the latest version, it may improve the performance too. This issue was really significant with GTA4. With the original version, it lagged with low settings, and with the latest patch i can play on medium settings with no lag at all.

  • T42p ATI Mobility Radeon Fire GL T2

    When I try to install the ATI Mobility Radeon Fire GL T2 driver from ATI's website, why does it not work? It claims the hardware is not present.
    Message Edited by rwing14 on 07-31-2008 12:30 PM

    Have you unpacked the driver from the correct directory after downloading it, it should be something like C>Drivers>Win>Video (or Monitor)?
    Cheers,
    George
    In daily use: R60F, R500F, T61, T410
    Collecting dust: T60
    Enjoying retirement: A31p, T42p,
    Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
    Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

  • Support Windows 10 for ATI Mobility Radeon X2300

    Hi Will be any driver how to install ATI Mobility Radeon X2300 for Windows 10 or not? Thank you

    look here! http://answers.microsoft.com/es-es/windows/forum/windows_10-win_upgrade/pantalla-ati-mobility-radeon-x2300-no-compatible/83e306a6-979c-4c79-b064-468a8f840fdb Some people said that the driver works!

Maybe you are looking for